Tablet coater

5X

Condition: used, functionality: fully functional, Year of construction: 2011, operating hours: 7,766 h, load capacity: 3,000 kg, lifting height: 5,500 mm, fuel type: diesel, mast type: triplex, construction height: 3,040 mm, power: 70 kW (95.17 HP), empty load weight: 6,226 kg, total length: 3,800 mm, drive type: Diesel, construction width: 2,100 mm, Diesel forklift Mast type: Triplex Condition: Ready for use and fully functional Fgodpfsztt Tnjx Apwef Technical condition: good Front tire type: Pneumatic Front tire condition: 80 - 100% Rear tire type: Pneumatic Rear tire condition: 0 - 20% Description: Front forklift - all-terrain forklift MANITOU M30-4T - - - 3-ton lifting capacity - - - side shifter - - - TRIXPLEX free-lift mast - - - overall height 3.04m - - - lifting height 5.50m - - - year of manufacture 2011 - - - 7766 operating hours according to meter - - - 4-cylinder PERKINS TURBO diesel engine, 95 hp - - - pneumatic front tires approximately 90%, rear 10% - - - large front tires - - - good off-road capability - - - 4-speed torque converter transmission - - - work lights front and rear - - - full cab with heating - - - mechanical hydraulic system - - - all-wheel drive can be engaged - - - length without forks 3.80m - - width 2.10m - - overall height 3.04m - - good condition Side shifter, 3rd valve, work light rear, work light front, heater, full cab.

Condition: used, Year of construction: 1980, turning diameter over bed 0530 mm turning diameter over slide rest 300 mm turning length 1550 mm spindle bore 78 mm spindle turning speed range 22- 1600 U/min total power requirement 7,5 kW weight of the machine ca. 3 t dimensions of the machine ca. 3,2 x 1,2 x 1,4 m With Multifix holder and chuck. Fgsdpfxjw Rf H Nj Apwjf

Condition: used, Year of construction: 1990, plate thickness 5 mm Fjdpfx Aoztf Azopwsgf cutting length 3000 mm rear stop 750 mm total power requirement 7,5-10 kW weight of the machine ca. 4 t

Condition: new, empty load weight: 2,520 kg, maximum load weight: 7,980 kg, overall weight: 10,500 kg, axle configuration: 2 axles, loading space length: 5,500 mm, loading space width: 2,000 mm, suspension: steel, tire size: 235 / 75 R 17,5, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Loading height loaded: 650 mm, wooden floor, 2 x ramps (2,500 mm long x 500 mm wide), ramps with spring lifters, ramps with gratings, 10 x lashing eyes, geared support winch with load and fast gear, front, 2 x supports, rear, chassis and body hot-dip galvanized, , Rental price from 500 ¤ , , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Fgodpezr Uiusfx Apwsf

Condition: new, empty load weight: 2,520 kg, maximum load weight: 7,980 kg, overall weight: 10,500 kg, axle configuration: 2 axles, loading space length: 5,500 mm, loading space width: 2,000 mm, suspension: steel, tire size: 235 / 75 R 17,5, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Loading height loaded: 650 mm, wooden floor, 2 x ramps (2,500 mm long x 500 mm wide), ramps with spring lifters, ramps with gratings, 10 x lashing eyes, geared support winch with load and fast gear, front, 2 x supports, rear, chassis and body hot-dip galvanized, , Rental price from 500 ¤ , , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Fedpezr R Umjfx Apwegf

Condition: good (used), Year of construction: 2001, sheet width 2020 mm plate thickness 1.5 mm ST bending angle max. 180 ° Swing beam adjustment ca. 20.0 mm Bending time for 90° 5.5 sek Control konv. voltage 380 V total power requirement 1.5 kW Fgjdpfezr Rqhjx Apwsf weight 1180 kg range L-W-H 2650 x 1230 x 1100 mm Features: - Simple electric motor-driven swivel bending machine - Manual depth/material stop * Stepless adjustment up to a maximum of 700 mm * Adjustment via handwheel from the rear * Analog position display - Simple manual angle adjustment - 1x bending tool set * With bending rail .. 10 mm - Manual lower crossbar adjustment .. approx. 20.0 mm - Emergency stop button on the front - 1x freely movable double foot switch - Operating instructions (DK)

Condition: used, Year of construction: 2009, x-travel: 4000y-travel: 2000z-travel: 600messurements (LxWxH): 6.400 x 3.200 x 3.100weight approx.: 10.500 Control: Siemens PLC Touch Screen directly usable DXF files Outlet pressure: max. 5500 bar Abrasive conveyor system for water jet cutting systems - filling weight 350 kg OMAX vacuum sensor for monitoring the abrasive supply to the nozzle Pump pressure control sensor With water jet cutting, water is compressed at a pressure of up to 5500 bar. Depending on the requirements and the workpiece, this is then pressed through a nozzle with a diameter of 0.01 to 0.08 mm. Since water jet technology processes materials without heat input, there are no deformations. By adding an abrasive, water jet cutting enables maximum precision with tolerances of +/- 0.01 mm. Our flexible production allows vertical as well as diagonal cuts. We would be happy to receive your individual CAD data. The water jet technology offers great advantages for industry, trade and individual prototype production. Water cutting technology is also a plus point for the environment, as it works dust- and steam-free and also saves material. Waterjet Cutting: Example Gallery What sounds impressive in theory is even more impressive on the finished object. We have put together a selection of images to demonstrate our waterjet cutting capabilities. Click through the photos in the example gallery and get an impression of what is possible with this modern processing method. Waterjet will also find the right solution for your order! benefits No deformations in the cutting area Cutting without heat input Material saving High precision: +/- 0.1mm Cutting area: x = 3010 mm; y = 2010mm; Z=250mm Flexible manufacturing Vertical and oblique cuts Adoption of your CAD data formats: DXF, DWG, iges, stp, step, prt, jpt, jam Environmentally friendly, vapor and dust free We cut everything All materials brought into shape aluminum steel Brass Copper & Bronze Other precious metals Glass Granite & Marble tiles composites Fgsdpfx Aswiatispwjf Promat cuts rubber plastics plexiglass Options: Oil cooler                                                         ¤ 10,725.00 Water filter system                                           ¤   1,430.00 Sludge suction system                                     ¤ 10,725.00 Professional water treatment system               ¤ 10,725.00 An oil cooler must be present when commissioning!!! So you can work longer than 1 hour. Extras: Including extra spare parts worth approx. 25.000¤ (see pictures)

Condition: used, Year of construction: 2012, GENERAL FEATURES: CNC machining center with a fixed machine table and a moving tool carrier in a portal design for drilling and milling operations on panels made of various materials (chipboard, MDF, solid wood, plastic, etc.). MACHINE STRUCTURE: The base structure is a monolithic design made of thick-walled material, reinforced by welded-in parts across the entire machine bed, making it extremely stable. The table design, with a large base, ensures long-lasting precision and stability. The machine layout allows the user an optimal workflow despite a minimum of space. The mobile portal carrier is made from a solid monoblock. It is positioned in the X-direction on prismatic, ground guides using ball screw slides. On this mobile tool carrier, the working unit is in turn attached to prismatic, ground guides and the ball screw slide. Axis movement is achieved using "brushless" motors in the X/Y/Z axes. The drive system operates in the X-axis via a pre-tensioned precision rack and pinion drive, and in the Y/Z axes via ground ball screws of the highest precision class. AXIS MOVEMENT: The movement of all axes takes place on prism linear guides with a large cross-section and ball screw shoes with a large contact surface, which ensure optimal sliding even at the highest speeds and accelerations. The precise and rapid positioning of the moving portal (X-axis) is achieved by a pinion and rack with helical teeth. Ball screws with a large cross-section ensure the accurate positioning of the working unit along the moving portal (Y and Z axes). The perfect mechanical dynamics and maximum positioning accuracy are controlled by high-quality drives and brushless motors. STANDARD MACHINE DESIGN: Milling spindle with 5-axis positioning, 11kW (15HP), HSK63, 1200-20000 RPM. The machining unit consists of a powerful 11 kW (15 HP) motor, which is liquid-cooled and capable of 5-axis positioning. This feature enables machining operations to be performed with a tool that can be oriented in any direction; therefore, fewer angular movements are required. The base structure of the milling unit is based on a design with two non-orthogonal axes that intersect next to the tool. This feature guarantees a robust carrier for heavy-duty milling applications. Thanks to the non-orthogonal axes, it is possible to perform numerous repositionings without using too much space. This allows the machining of complex geometries without the risk of collision with the workpiece and achieves an angle of -10° in relation to the machine table. All machining operations are facilitated by the small dimensions of the group in relation to the rotation axis of the spindle: when the group is in a horizontal position, the dimension is only 35mm. WORK TABLE TV: The work table is designed to guarantee the operator maximum "freedom of movement." The vacuum quick-change clamping system provides maximum flexibility with precise positioning and optimal work piece holding. The table consists of moving consoles that are adjusted in the X-axis on ground guides with ball screw shoes and a special profile to ensure Fgedpfozrvvvjx Apwsf

Condition: used, mileage: 891,508 km, power: 338 kW (459.55 HP), first registration: 01/2011, fuel type: diesel, tire size: 385/55R22.5, axle configuration: 10x4, wheelbase: 7,250 mm, fuel: diesel, brakes: engine braking, color: blue, gearing type: automatic, emission class: euro5, suspension: other, total length: 10,860 mm, total width: 2,550 mm, loading space length: 7,000 mm, loading space width: 2,550 mm, loading space height: 1,240 mm, Year of construction: 2011, Equipment: AdBlue, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, seat heater, traction control, trailer coupling, = Additional options and accessories = - Remote-controlled central locking - Refrigerator - Tow hitch - Radio - Rear view camera - Sun visor - Spotlights - Toolbox = Notes = Effer 91 NL4S Year 1994 In 2011, rebuilt and upgraded to: - Effer 108 N 5S Radio remote control. 5 x hydraulic extension. 1 x manual extension. 2.39 m - 27.550 kg. 4.65 m - 18.200 kg. 6.38 m - 13.050 kg. 8.23 m - 10.000 kg. 10.18 m - 8.000 kg. 11.81 m - 6.830 kg. 14.04 m - 5.100 kg. Manual extension 16.33 m - 4.150 kg. = Further information = Technical information Number of cylinders: 6 Axle configuration Front axle 1: Tire size: 385/55R22.5; Steered; Tire tread left: 50%; Tire tread right: 50%; Brakes: Disc brakes; Suspension: Leaf spring suspension Front axle 2: Tire size: 385/55R22.5; Steered; Tire tread left: 40%; Tire tread right: 40%; Brakes: Disc brakes; Suspension: Leaf spring suspension Center axle: Tire size: 435/55R22.5; Steered; Tire tread left: 70%; Tire tread right: 70%; Brakes: Disc brakes; Suspension: Hydraulic suspension Rear axle 1: Tire size: 315/70R22.5; Dual tires; Tire tread left inner: 40%; Tire tread left outer: 40%; Tire tread right inner: 40%; Tire tread right outer: 40%; Brakes: Drum brakes; Suspension: Hydraulic suspension Rear axle 2: Tire size: 315/70R22.5; Dual tires; Tire tread left inner: 50%; Tire tread left outer: 50%; Tire tread right inner: 50%; Tire tread right outer: 50%; Brakes: Drum brakes; Suspension: Hydraulic suspension Weights Unladen weight: 30,455 kg Payload: 19,545 kg GVW: 50,000 kg Functional Fsdpjztxiuefx Apwogf Crane: Effer Maintenance APK (technical inspection): valid until 01/2027 Financial information Price: Upon request Identification Model number: X 5240 TS 10x4 / EFFER 108-5S CR = Company information = ALL PRICES ARE NET FOR EXPORT (Joris Versteijnen NL-DE-GB) (Wouter Greutink NL-DE-GB-ES-IT) (Govorim po ryccki) We make every effort to provide accurate information. However, no rights can be derived from the information provided.

Condition: used, mileage: 271,233 km, power: 338 kW (459.55 HP), first registration: 07/2018, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: white, gearing type: automatic, emission class: euro6, loading space length: 7,000 mm, loading space width: 2,540 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), EXCELLENTLY MAINTAINED VOLVO TRIDEM-EURO6-I, SHIFT AUTOMATIC TRANSMISSION, TOW HITCH, REVERSING CAMERA, EBS BRAKE SYSTEM, AIR CONDITIONING, DIFFERENTIAL LOCK, VERY GOOD TIRES, LIFT/STEERING AXLE, 7M FLATBED WITH RESIN-TREATED WOODEN FLOOR, TIE-DOWN POINTS, FOLDABLE CRANE AT THE REAR: PALFINGER PK53002SH-D, RADIO REMOTE CONTROL, 4X FULLY HYDRAULIC OUTRIGGERS, CONTINUOUSLY ROTATING SWIVEL RING, ONLY 812 CRANE HOURS!!!!, 5X HYDRAULIC EXTENSION AT 14M50/3050KGRS, WORKING HEIGHT APPROX. 18M, 53TM CRANE, VEHICLE IN TOP CONDITION!!! Fgjdpfxoztvbne Apwsf