Hydraulic cutter for trims and long pieces of wood

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, drilling depth: 660 mm, travel distance X-axis: 700 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 1,000 mm, drill diameter: 30 mm, TECHNICAL DETAILS Drilling depth: 660 mm Drill diameter: 30 mm Bsdpfx Agjya U U Uoljcu X-axis travel: 700 mm Y-axis travel: 500 mm Z-axis travel: 1,000 mm W-axis travel: 250 mm Spindle speed: 60 - 60,000 rpm Table length: 900 mm Table width: 500 mm Table load capacity: 2,000 kg MACHINE DETAILS Control system: Heidenhain iTNC530 Dimensions & Weight Dimensions (L x W x H): 3,706 x 3,960 x 2,650 mm Total weight: 8,000 kg EQUIPMENT CNC rotary table (4th axis) Chip conveyor Paper band filter Electronic handwheel Original documentation

Condition: good (used), Year of construction: 1998, Skid-mounted nailing machine P + K Pallet nailing machine P+K SNM-III-24-1250 Intermediate drive with branding punch Positioning table Portal stacker Bcodpfx Ajuzh Anoglju Pallet size 600x800 - 1200x1400 mm

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, travel distance X-axis: 660 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 600 mm, controller model: PHILIPS CNC 532, Equipment: chip conveyor, TECHNICAL DETAILS X-axis travel: 660 mm Y-axis travel: 500 mm Z-axis travel: 600 mm Table clamping surface: 630 x 500 mm Spindle taper: SK 40 Spindle speeds: 20 - 6,300 rpm Feed rate: 30 m/min MACHINE DETAILS Control: PHILIPS CNC 532 Internal coolant supply: 40 bar Total power requirement: 50 kW Bodpfeya Hcqjx Aglocu Dimensions & weight Machine dimensions: 4.98 x 2.78 x 2.93 m Machine weight: approx. 13.3 t EQUIPMENT Chip conveyor Coolant system Rotary pallet changer Hydraulic swivel head (horizontal/vertical)

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: AB0702, travel distance X-axis: 650 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 530 mm, controller model: FANUC 21 iMB, table load: 500 kg, TECHNICAL DETAILS Travel X-axis: 650 mm Travel Y-axis: 500 mm Travel Z-axis: 530 mm Table clamping surface: 800 x 500 mm Spindle speeds: 60 - 8,000 rpm Spindle taper: SK 40 Spindle taper standard: DIN 69871 A Maximum table load: 500 kg Rapid traverse X/Y/Z-axis: 30 m/min Tool changer: 30 positions Tool diameter with full magazine: 80 mm Tool diameter with 2 free positions: 120 mm Maximum tool length: 250 mm Maximum tool weight: 7 kg Bjdjya E Thspfx Aglscu MACHINE DETAILS Control: FANUC 21 iMB Total power requirement: 30 kVA Dimensions & Weight Machine dimensions (L x W x H): 2.4 x 2.2 x 2.46 m Machine weight: 4.5 t EQUIPMENT NC rotary axis with tailstock, manufacturer MECA-DIVIMEK (Spain), DCH 160 C 2 machine vices Coolant system

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, feed length Y-axis: 6,000 mm, Kippwanne für Baumstämme bis zu 6 m länge. Tipping tray for logs up to a length of 6m Bcodpfx Agsr Iig Dolju Verfügbar ab September 2024 Available from September 2024

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, travel distance X-axis: 1,500 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 650 mm, spindle speed (max.): 6,000 rpm, Equipment: chip conveyor, TECHNICAL DETAILS Travel X-axis: 1,500 mm Travel Y-axis: 650 mm Travel Z-axis: 650 mm Pallet size: 1,740 x 650 mm Spindle taper: SK 50 Spindle speeds: 25 - 6,000 rpm Spindle overhang: 665 mm Distance spindle nose to table: 200 / 850 mm Spindle motor power: 18.5 kW Max. spindle torque: 758 Nm Bcodsya E Ryjpfx Aglsu Feed rate - longitudinal/cross/vertical max.: 8 mm/min Rapid traverse longitudinal and cross: 26 m/min Rapid traverse vertical: 20 m/min Drilling capacity (solid): 50 mm Tapping capacity: M 45 Tool changer positions: 60 Tool diameter: 125 mm Tool diameter with 2 empty stations: 260 mm Max. tool length: 400 mm Max. tool weight: 20 kg EQUIPMENT Chip conveyor Coolant device

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 91132846, Year of construction: 2018, operating hours: 8,616 h, The mast will be disassembled by the manufacturer prior to transport. The technical data is based on the original quotation. The seller assumes no liability for its accuracy. TECHNICAL DETAILS Load capacity: 1,600 kg Load center distance: 600 mm Mast type: DZ-V mast Lift height: 10,700 mm Height of mast (retracted): 4,100 mm Free lift: 3,456 mm Height of mast (extended): 11,344 mm Fork tilt forward: 2° Fork tilt backward: 5° Fork length: 1,150 mm Fork dimensions: 40 x 120 x 1,150 mm Width between wheel arms/loading platform: 940 mm MACHINE DETAILS Height to top of overhead guard (cab): 2,263 mm Overall width: 1,282 mm Battery voltage: 51.2 V Bodpfx Ageyaawhjlocu Tyres: Ø 343 x 114 Operating hours: 8,616 h EQUIPMENT ISM Online ETV 216i Drive & liftPLUS equipment package Drive wheel, 140 mm wide Load wheel cover Panorama overhead guard Panorama rear-view mirror Blue floorSPOT lighting M-Device; including 2 adapters Video; video preparation Seat; leather MSG20 with 3-stage heating Voltage converter; 125 W, 48/24 V Battery: Li-Ion 51.2 V 360 Ah Type IM Charger: SLH300 D400 48 V 150 A

Condition: new, Technical data: Minimum cutting width: 300 mm Max cutting width: 400mm Max cutting height with standard blade guide: 350 mm Max cutting height with special blade guide: 410 mm Belt length: 2720 mm Motor power: 1.1 kW Advantages: -They are safe and easy to use machines, manually operated by the operator. -Designed and built to cut materials such as: solid wood, panels, plywood boards, also laminated or edged -They are suitable for both small jobs and mass production -The main advantage that distinguishes MD Dario band saws from conventional models is the articulated arm with a special system of joints that allow the machine to rotate freely in all directions and angles, thanks to which the user can make precise cuts - The saws have 3 rubber-coated flywheels, thanks to which it is possible to perfectly guide the saw and use band blades of different sizes depending on the type of cut Bsdpfjmiiktjx Aglscu Work table and tilt included.

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, overall weight: 1,298 kg, load capacity: 120 kg, arm reach: 3,900 mm, controller manufacturer: KUKA, number of axes: 6, TECHNICAL DETAILS Bsdpfxeycqb As Agljcu Axes: 6 Payload: 120 kg Reach: 3,900 mm Availability: 99.9 % MACHINE DETAILS Robot control: KUKA Control protection class: IP54 Robot protection class: IP64 Robot pedestal height: 1,500 mm Weight: 1,298 kg

Condition: ready for operation (used), functionality: fully functional, TECHNICAL DETAILS Maximum film height: 500 mm Maximum roll diameter: 250 mm Bodpfxeycp Tkj Aglscu Core diameter: 76 mm MACHINE DETAILS (not available) EQUIPMENT (not available)

Year of construction: 1995, condition: used, machine/vehicle number: LWT , Tank-& Umweltschutz Wozniack Specialist company according to the Water Resources Act Dear Sir or Madam, we offer a 20,000 liter storage tank for the storage of water and wastewater as follows . This is a 30 cbm storage tank made of steel. Material S235JRG2 steel . Incl manufacturer certificate DIN and nameplate. The tank is cleaned from the inside and bitumen insulated from the outside. Suitable for underground as well as above ground storage. Tank dimensions : Length : approx. 6.400 mm Diameter : approx. 2.000 mm Weight : approx. 4.000 kg Shape : cylindrical Equipment : on request For the use as extinguishing water tank additionally a suction line with A-fixed coupling according to DIN can be offered. Of course, you can also co-design your tank system! All our plants are extensively controlled and checked in our company by selected employees. We also offer an inexpensive delivery on request. The inspection of our plants is possible at any time. Further tank plants for above ground as well as underground storage are available in all sizes and are for sale on our premises. and are available for sale on our premises. Could we convince you of our offer? If you have any questions or requests, just call, one of our experienced staff will be happy to advise you. Bjdpfx Aec Nkyvjglocu General: All offers are valid ex location Warstein , free loaded. Delivery can be offered at a reasonable price for an additional charge. Delivery time = immediately You will receive an invoice with VAT. In addition, we buy existing tank installations and can, as an approved specialist company according to the Water Resources Act (WHG) we can professionally empty, clean, dismantle and transport them away. With kind regards from Warstein Tank and environmental protection Wozniack Enkerbruch 2 59581 Warstein

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2005, operating hours: 11,000 h, controller model: Sinumerik 840D, laser power: 2,700 W, sheet thickness steel (max.): 6 mm, sheet thickness aluminum (max.): 4 mm, working length: 6,500 mm, TruLaser Tube 5000 with Special Equipment: Laser TruFlow 2700 & SeamLine Tube! TECHNICAL DETAILS Laser Power: 2,700 W Maximum Sheet Thickness (Steel): 6 mm Maximum Sheet Thickness (Aluminum): 4 mm Working Area: 6,500 mm Bjdpfjyanr Tjx Aglscu MACHINE DETAILS Laser Type: TruFlow 2700 Control System: Sinumerik 840D Laser Operating Hours: 11,000 h EQUIPMENT - Documentation / Manual - Safety light curtain - Sturdy machine frame with integrated laser unit - CO2 laser TruFlow 2000, high-frequency excited, with cooling unit - Maintenance-free three-phase servo motors - NitroLine high-pressure cutting - SprintLine for rapid processing - Programmable cutting gas pressure control - Laser cutting head with 5 lenses - Quick-change device for the cutting head - Laser power control - Laser logbook function - Automatic shutdown - Workspace illumination - Multi-beam light curtains - Fully enclosed and ventilated beam guidance - Compact dust extractor - Protective enclosure - PRS 3001 discharge station with brush table - Set of clamping jaws D 20–85 mm and D 85–150 mm - 1 set of V-shaped form shells and guide rollers for round tubes - 1 set of U-shaped form shells and guide rollers for a circumscribed diameter of 120 mm - SeamLine Tube

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, operating hours: 22,600 h, machine/vehicle number: A0230A2187, laser power: 7,000 W, sheet thickness steel (max.): 25 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 116 mm, No minimum price – guaranteed sale to the highest bidder! TruLaser 5030 Laser Cutting Machine with Special Equipment TruFlow 7000! TECHNICAL DETAILS Laser power: 7,000 W Travel X-axis: 3,000 mm Travel Y-axis: 1,500 mm Travel Z-axis: 116 mm Max. sheet thickness (steel): 25 mm Max. sheet thickness (aluminum): 20 mm X-axis feed rate: 200 m/min Max. workpiece weight: 900 kg MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 11,100 x 4,600 x 2,600 mm Total weight: 12,000 kg Control system: SINUMERIK 840D Laser type: TruFlow 7000 Laser hours: 22,600 h EQUIPMENT • Enclosed machine frame with integrated laser unit • Motion unit for ultra-precise machining • Gantry drive combined with linear direct drives Bcedpeyanplofx Aglju • Enclosed beam guidance • Single cutting head strategy • TFT color monitor • Longitudinal conveyor belt for small parts and scrap • Automatic pallet changer • Work area lighting • Positioning laser diode • Oil spray device • Piercline • FocusLine • NitroLine • PlasmaLine • CO2 Laser TruFlow • Maintenance-free turbo radial blower • Lens cutting head with 250 mm lens • Universal quick-change device (UTI) with bus connection • LensLine with condition monitoring • ControlLine: height control and sheet edge detection • Auto shut-off • ConturLine • FastLine • FlyLine • Microweld • USB interface • RJ-45 network connection • CE marking • Light barriers • Multi-chamber extraction system • Compact dust extraction unit • Complete operating manuals • Lens cleaning kit • Transport locks • Crosshairs/ measuring bridge

Condition: reconditioned (used), Year of construction: 2018, operating hours: 6,070 h, Jenz BA 965 DL Titan - Year of manufacture: 2018 - Operating hours: 6,070 - Engine: Mercedes MTU, 630 HP Bedpfx Asxmvn Isglscu - AdBlue - Remote control - Hydraulic drive (self-propelled) - Weight: 25,000 kg Machine has been workshop overhauled and is immediately available.

Condition: ready for operation (used), Year of construction: 2007, operating hours: 32,000 h, functionality: fully functional, spindle speed (max.): 8,000 rpm, travel distance Z-axis: 140 mm, counter spindle speed (max.): 8,000 rpm, number of axes: 5, Equipment: bar feeder, TECHNICAL DETAILS Number of axes: 5 Number of spindles: 2 Main spindle Max. bar diameter: 16 mm Z-axis travel: 140 mm Spindle speed: 8,000 rpm Spindle drive power: 2.2 kW Number of tool positions: 13 Sub-spindle Max. bar diameter: 12 mm Spindle speed: 8,000 rpm Number of tool positions: 4 MACHINE DETAILS Control: FANUC 18i-T Bcedjycp Nlepfx Aglju Operating hours: 32,000 h EQUIPMENT FMB Minimag bar loading magazine Note: Dismantling and loading can be carried out by the seller for €1,500.