Work table

Condition: ready for operation (used), Year of construction: 2009, machine/vehicle number: 19500648, functionality: fully functional, workpiece length (max.): 3,500 mm, workpiece width (max.): 130 mm, workpiece height (max.): 120 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. profile length: 3,500 mm Max. profile width: 130 mm Max. profile height: 120 mm MACHINE DETAILS Number of milling and drilling units: 7 Max. Friedrichs motor speed: 18,000 rpm Max. machine motor speed: 1,500 rpm Electrical operating voltage: 400 V, 50 Hz Required network voltage: 20 kW Cable connections: 400 V NPE Operating height of the control cabinet: 1,050 mm Pneumatic operating pressure: 6 - 7 bar Pressure consumption per cycle: Approx. 3,500 NI Pneumatic line pressure at 70 °C: Approx. 15 bar EQUIPMENT Bodszln D Eopfx Ap Ejdf Automatic screw feeder Arrangement of the units: On a wheel, which enables machining at different angles.

Condition: new, Year of construction: 2026, Metal roof snap lock machine SLP-1 auto with side punching option is the latest project of our company in the direction of equipment for metal roofing production. Snap lock machine SLP-1 auto can produce click-seam panels with fixation holes and punch off side parts of the panels, it makes possible to bend the edge of the panel and join it to the roof elements after. Our machine is equipped with an automation system and make production in a fully automatic mode. This process comes following way: operator of machine put end of metal roll to the pulling rollers of the machine, which moves it to the rolling part of the equipment. At the beginning of the rolling process, two pneumatic punching presses from each side of machine make side cuts of panels. After cutting, the rolling process goes to the next rolling rollers. They gradually form the roofing panel profile and cut out fixation holes with special cutting tool rollers. After rolling, special automatic shear at the end of machine cut off the panel into length with necessary sizes. As machine cuts side parts of panels at the beginning of production process, so it cuts only flat part of panel in the end of production. It makes panel quality better and there are no any deformations as with a profile cutting happens, when guillotine shear has to cut not only flat part but also the lock part of panel. Specifications: Dimensions (mm): rolling machine 3000x1400x900 guillotine shears 400x1120x1130 Weight (kg): rolling machine 643 guillotine shears: 110 Drive power: rolling machine: 1.5 kW, 220V (or 380V on request) guillotine shears: 1.1kW Maximum thickness of sheet metal (mm): 0.6-0.7mm Workpiece Width (mm): 250-700 Rolling speed (m/min): up to 10 Metal roof panel machine SLP-1 auto has an automation system so help to make minimum part of operator works - he just sets necessary number of panels and their length on the computer to produce, and the machine automatically rolls and cuts them. Therefore reducing the influence of the human factor, manufacturing errors are minimum and panels are all the same sizes and ready for further installation. SLP-1 auto click lock roll forming machine has easy width adjustment system, so to change machine from one panel width to another, the operator just needs to turn the adjustment wheel, so the readjustment takes a very short time for such operation. As additional options metal roof panel roll forming machine SLP-1 auto can have: Bdedpsuzv Tzofx Ap Eof Cutting knife to cut metal from coil at the end of the metal rolling process to reduce the amount of possible waste material; Ribbed panel rolls, to roll narrow or wide ribs in the center of the roofing snap lock panel; Microwave panel module- device to form small bends along the entire width of the roofing panel, making the appearance of the roof more interesting and eye-catching. Metal unwinder (can be floor-standing, manual console, automatic console).

Condition: ready for operation (used), Year of construction: 2006, machine/vehicle number: 19500624, functionality: fully functional, operating pressure: 7 bar, rotational speed (max.): 18,000 rpm, working height: 1,000 mm, No minimum price – guaranteed sale to the highest bidder! The new price of the machine was €950,000! Bdedpfx Aszlnxijp Eof TECHNICAL DETAILS Milling units / Motor power Motor power, small milling cutter: 0.27 kW Frequency, small milling cutter: 300 Hz Speed, small milling cutter: 18,000 rpm Motor power, large milling cutter: 1.1 kW Frequency, large milling cutter: 200 Hz Speed, large milling cutter: 12,000 rpm Tool data / Milling cutter data Collet diameter, small milling cutter: max. 8 mm Milling cutter diameter, small milling cutter: max. 8 mm Collet diameter, large milling cutter: max. 10 mm Milling cutter diameter, large milling cutter: max. 14 mm Electrical data Operating voltage: AC 400 V 3 N/PE Frequency: 50 Hz Rated current: 35 A Control voltage: 24 V Pneumatic data Working pressure: 0.7 / 1 MPa (7 / 10 bar) Compressed air consumption: 170 l/min Load limit of pneumatic lines at 70 °C: approx. 15 bar Working height Working height: 1,000 mm EQUIPMENT Clamping units Vertical clamping Maintenance unit with filter pressure regulator Control cabinet / Saw with lockable main switch Cutting unit: Allows cutting angles of 45 degrees and 90 degrees Machining units: Includes machining units and profile bearings Tools: Two screwdrivers, three cut-off wheels

Year of construction: 2005, condition: ready for operation (used), functionality: fully functional, power: 14 kW (19.03 HP), input current: 80 A, workpiece length (max.): 4,000 mm, machine/vehicle number: 6080008129, TECHNICAL DETAILS Maximum profile width: 130 mm Maximum profile height: 205 mm Maximum workpiece/profile length: 4,000 mm Processing capacity: 80 units MACHINE DETAILS Connection: 3 N/PE 400 V Frequency: 50 Hz Current: 80 A Power: 14 kW EQUIPMENT Powered, continuously adjustable gripper Lifting function for smooth feeding Profile guidance on rollers Bdedpfx Aozlnvuop Ejf Internal gripper to prevent damage to the profiles Integrated measuring sensors for workpiece length control Workpiece removal via outfeed table Portal design for high profile cross-sections Industrial PC with Windows operating system Barcode scanner

Condition: good (used), Offer 26137a Bdodpey U Hn Dofx Ap Eef Technical data: - Work surface: Width 1500 x Depth 700 mm - Work surface thickness: 40 mm - Work height: 840 mm - 2 pcs. extendable drawers on roller bearings - 2 pcs. hinged doors, left + right - Space requirement: approx. Width 1500 x Height 840 x Depth 700 mm - Weight: approx. 150 kg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2015, operating hours: 4,125 h, load capacity: 8,000 kg, lifting height: 3,600 mm, mast type: duplex, fork length: 2,050 mm, overall weight: 13,948 kg, An oil change was performed before the sale. Only the hydraulic oil was not changed. The filters have been replaced. TECHNICAL DETAILS Load capacity: 8,000 kg with load center at 900 mm Residual load capacity with Kaup 10T160 fork positioner: 7,320 kg with load center at 900 mm Tractive force with/without load: 45.6 kN Lifting height: approx. 3,600 mm Fork length: approx. 2,050 mm MACHINE DETAILS Bdsdozlhnqopfx Ap Eef Engine: LPG GM 5.7L V8 Cylinders: 8 Displacement: 5,700 cm³ Rated speed: 2,200 rpm Power: 85 kW Operating hours according to display: approx. 4,125 h Operation: Solo-Pilot with multi-function display Dimensions & Weight Overall length including forks: approx. 5,950 mm Overall width: approx. 2,150 mm Height with mast retracted: approx. 3,160 mm Height with mast extended: approx. 4,960 mm Height above protective roof: approx. 2,705 mm Self-weight: approx. 13,948 kg EQUIPMENT Kaup 10T160 fork positioner Duplex mast 3rd + 4th control circuit Side shifter Solo-Pilot Single pedal control Work lights front and rear Full cabin with heater Note: The two tires on the steering axle, as well as the fork tines, should be replaced. This can be requested and carried out by the seller. Fork tine length would be selectable.

Condition: used, Year of construction: 2007, operating hours: 39,023 h, machine/vehicle number: 1315318, laser power: 5,000 W, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 115 mm, workpiece weight (max.): 900 kg, No minimum price – guaranteed sale to the highest bidder! The machine has not been powered on for approximately one year. TECHNICAL DETAILS Laser power: 5,000 W Working area (X x Y x Z): 3,000 mm x 1,500 mm x 115 mm Sheet metal thickness, structural steel max.: 25 mm Sheet metal thickness, stainless steel max.: 20 mm Sheet metal thickness, aluminum max.: 12 mm Maximum workpiece weight: 900 kg Positioning speed max.: 300 m/min Positioning accuracy: +/- 0.1 mm MACHINE DETAILS Control system: CNC Siemens Sinumerik 840 D Operating hours, laser on: 77,107 h Operating hours, beam on: 39,023 h Dimensions & Weight Machine dimensions (L x W x H): 11,100 mm x 4,600 mm x 2,400 mm Machine weight: 12,000 kg Bjdpfozlhcnox Ap Esdf EQUIPMENT Automatic pallet changer NitroLine FocusLine PlasmaLine SprintLine ContourLine

Condition: good (used), workbench, work table, assembly bench Bdjdpod Inxlsfx Ap Esf -Width: 2420 mm -Depth: 795 mm -Height: 850 mm -Workbench: 19 mm thick blockboard -Dimensions: 2760/795/H850 mm -Weight: 118 kg

Year of construction: 2010, condition: ready for operation (used), functionality: fully functional, working length: 7,600 mm, machine/vehicle number: 1400040505, number of axes: 4, TECHNICAL DETAILS Max. machining length with end face machining: 7,600 mm Max. machining length without end face machining: 7,720 mm EQUIPMENT 12 pneumatic collet chucks 2 work areas 4-axis profile machining center; stepless machining between -90° and +90° with each available tool Automatic clamping position adjustment with absolute measuring system Two separate machining zones for tandem operation 4-axis control Bodpozhuyfsfx Ap Eodf 18.5" color monitor, USB ports, and network connection Windows operating system EluCam software Automatic profile length measurement (on both sides) Barcode scanner The traversing tool magazine ensures short tool change times and thus optimal machining cycles; the magazine can be equipped with eight tools. 8x tool holders with collet chucks

Condition: ready for operation (used), Year of construction: 2005, operating hours: 20,729 h, functionality: fully functional, travel distance X-axis: 980 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 630 mm, controller model: Heidenhain iTNC 530, rotational speed (max.): 18,000 rpm, TECHNICAL DETAILS Travel range X-axis: 980 mm Bedpfxszmry Ts Ap Eodf Travel range Y-axis: 630 mm Travel range Z-axis: 630 mm Spindle speed range: 0–18,000 rpm Tool holder: HSK 63 MACHINE DETAILS Control system: Heidenhain iTNC 530 Clamping area: 1,250 × 700 mm Operating hours Machine operating hours: 46,922 h Program runtime: 20,279 h Spindle operating hours: 20,746 h EQUIPMENT Fixed angular table 3D measuring probe Heidenhain Tool measurement in the working area with BLUM laser Vertical tool changer with 32 magazine slots Full protective enclosure with sliding doors and interior lighting Electronic handwheel Operating modes 3 and 4 Chip conveyor Coolant system 3 height-adjustable machine feet Spindle cooler Control cabinet cooler from Rittal Operating manuals

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, overall weight: 100 kg, total length: 800 mm, total width: 2,000 mm, total height: 900 mm, Work Table AT 2000 with Beechwood Top and Sliding Door Mobile Baker's Work Table Beechwood Worktop Sliding Doors Bjdpfxoyunbqs Ap Eedf Stainless Steel Construction Dimensions approx.: 2000 x 800 x 900 mm (W x D x H) Used device, cleaned Top sanded & newly oiled Visit our large showroom!

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller model: Heidenhain TNC 410, rotational speed (max.): 10,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range X-axis: 800 mm Travel range Y-axis: 500 mm Travel range Z-axis: 500 mm Spindle speed range: 0–10,000 rpm Spindle speed control: stepless Bsdpfozmryysx Ap Esdf Tool holder: SK 40 Magazine capacity: 20 MACHINE DETAILS Control system: Heidenhain TNC 410 Clamping area: 1,000 × 500 mm EQUIPMENT Fixed angular table Vertical tool changer Full enclosure with sliding doors and interior lighting Various tool holders SK 40 Electronic handwheel Coolant system with enhanced pump Coolant pressure: 20 bar Chip conveyor Operating manual

Condition: ready for operation (used), Year of construction: 2002, operating hours: 20,377 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 500 mm, controller model: Heidenhain iTNC 530, rotational speed (max.): 20,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 800 mm Travel range, Y-axis: 650 mm Travel range, Z-axis: 500 mm Bodpfjzmrpujx Ap Esdf Speed range: 0–20,000 rpm Speed control: stepless Magazine capacity: 30 Tool holder: HSK 63 MACHINE DETAILS Control system: Heidenhain iTNC 530 Clamping area: 900 × 600 mm Operating hours Machine operating hours: 54,796 h Spindle operating hours: 23,462 h Program run time: 20,377 h EQUIPMENT Fixed tilting table Vertical tool changer Full enclosure with sliding doors and interior lighting Electronic handwheel Tool measurement in the working area with BLUM laser 3D infrared probe Renishaw Chip conveyor Coolant system 4 height-adjustable machine feet Operating manuals

Condition: used, Workbench, work table, assembly bench, assembly table, work table Bdodpfx Ajn Hbcrsp Esf -Workbench: solid construction -Width: 1500mm -Depth: 700mm -Height: 840mm -Weight: 48 kg

Condition: ready for operation (used), Year of construction: 1991, functionality: limited functionality, travel distance X-axis: 5,020 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 2,000 mm, spindle diameter: 100 mm, controller model: Heidenhain 415 B, TECHNICAL DETAILS Spindle diameter: 100 mm Travel in X-axis: 5,020 mm Travel in Y-axis: 1,000 mm Travel in Z-axis: 2,000 mm Bsdpfx Apjzlryqj Eedf Tool holder: SK 50 MACHINE DETAILS Control system: Heidenhain 415 B Rotary table dimensions: 2,500 x 2,000 mm EQUIPMENT Indexable milling head 2.5 60-position tool changer Rotary table manufacturer: Scharmann Note: The rotary function of the rotary table is defective. The machine is sold without pallet changers.