BaumannPerfecta 132

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 516220V00316, Year of construction: 2019, operating hours: 6,820 h, load capacity: 1,600 kg, lifting height: 3,180 mm, free lift: 150 mm, Equipment: sideshift, TECHNICAL DETAILS Load capacity: 1,600 kg Load center: 500 mm Load distance: 374 mm Wheelbase: 1,319 mm Lift height: 3,180 mm Free lift: 150 mm Length including fork carriage: 1,861 mm Fork thickness: 40 mm Fork width: 80 mm Fork length: 800 mm Fork carriage width: 980 mm Axle load with load front/rear: 4,160 / 565 kg Axle load without load front/rear: 1,500 / 1,625 kg Ground clearance with load under mast: 290 mm Ground clearance at wheelbase center: 114 mm Aisle width for pallet 1,000 x 1,200 mm (crossways): 3,186 mm Aisle width for pallet 800 x 1,200 mm (lengthways): 3,311 mm Turning radius: 1,487 mm Smallest pivot point distance: 1,487 mm Mast height lowered: 2,160 mm Mast height extended: 3,742 mm Height above overhead guard: 2,035 mm Seat height: 1,058 mm Coupling height: 473 mm MACHINE DETAILS Dimensions & Weight Dimensions: 2,661 x 1,099 x 2,160 mm Own weight incl. battery: 3,125 kg Mast height extended: 3,742 mm Height above overhead guard: 2,035 mm Seat height: 1,058 mm Coupling height: 473 mm Voltage: 48 V Capacity: 625 Ah Operating hours: approx. 6,820 h EQUIPMENT UVV 04/26 Charger Side shifter Seat with seat heating Blue Spot front and rear LED headlights: 2x front, 1x rear Nedpeyiaxzofx Ag Iowc Windscreen with wiper Panoramic roof Digital display Interior rear-view mirror Operating manual Note: The upholstery is worn.

Condition: excellent (used), Year of construction: 2019, Ref: 10965 . 2019 Horizon HT-1000V Variable Trimmer ONLY 2.2m books trimmed! Inline or offline variable three-knife trimmer capable of zero make-ready on book trim size and thickness changes. Perfect for short run production, and book of one production which can be achieved through barcode driven set-up. Features: Nedpfxjwu Spts Ag Iswc Setup automatically on the fly by reading a barcode at the entrance of the trimmer. Also capable of automatic set-up from the operator panel for same size production runs. One-to-one book production with variable sizes can be produced. Both untrimmed and trimmed sizes can be variable, for true variable format production. Can be used solo or placed in-line with Horizon perfect binders. Specification: Untrimmed Book Size: Max. Spine Length 350 x Fore-edge Length 320 mm/ 13.780” x 12.600” Limitation: Maximum length from the center to top or bottom is 175 mm/ 6.889”. Min. Spine Length 148 x Fore-edge Length 105 mm/ 5.825” x 4.130” Limitation: The minimum length from the center to top or bottom is 74 mm/ 2.91”. Trim Width: Fore-edge: Max. 110 mm/ 4.330” Min. 1 mm/ 0.04” Top and bottom: Max. 80 mm/ 3.150” Min. 1 mm/ 0.04” Trim Height: 1 to 65 mm/ 0.04” to 2.560” Production Speed: 400 to 1,000 cycles per hour (Higher production can be reached with piled books)

Condition: ready for operation (used), Year of construction: 2004, operating hours: 18,183 h, functionality: fully functional, machine/vehicle number: 15035709304, travel distance X-axis: 700 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 520 mm, swivel angle B-axis (max.): 180 °, swivel angle C-axis (max.): 360 °, The machine will remain powered until 06.03.2026. TECHNICAL DETAILS Travel distances X-axis travel: 750 mm Y-axis travel: 600 mm Z-axis travel: 520 mm C-axis: ±360° B-axis: 180° Spindle type: SK-40 Spindle speed: 18,000 rpm Rotary table Clamping surface: 700 × 500 mm T-slot spacing: 63 mm Number of T-slots: 7 T-slot size: 14 H7 Centering bore: 30 H6 Rotary axis torque: max. 1,674 Nm Table rotation speed: max. 21.5 rpm Swivel torque: max. 2,019 Nm Swivel speed: 18.9 rpm Swivel range: 0 – 180° Input/display unit: 0.001° Maximum tool length from spindle nose: 315 mm Maximum tool weight (with automatic tool changer): 6 kg MACHINE DETAILS Control system: Siemens 840D Shop Mill Operating hours Power-on hours: 65,794 h Spindle hours: 18,183 h Dimensions & Weight Machine dimensions (L x W x H): 2,604 x 2,820 x 2,785 mm Machine weight (including base): 9,255 kg EQUIPMENT Nwsdpjymmpdjfx Ag Ijc 5-axis simultaneous machining 32-position tool changer Chip conveyor IKZ (internal coolant supply) with 70 bar Blum TC50 spindle probe

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 516220V00299, Year of construction: 2019, operating hours: 6,310 h, load capacity: 1,600 kg, lifting height: 3,180 mm, free lift: 150 mm, mast type: duplex, Equipment: sideshift, TECHNICAL DETAILS Load capacity: 1,600 kg Load center: 500 mm Load distance: 374 mm Wheelbase: 1,319 mm Lift height: 3,180 mm Free lift: 150 mm Length incl. fork back: 1,861 mm Fork thickness: 40 mm Fork width: 80 mm Fork length: 800 mm Fork carriage width: 980 mm Axle load with load front/rear: 4,160 / 565 kg Axle load without load front/rear: 1,500 / 1,625 kg Ground clearance with load under mast: 290 mm Ground clearance at wheelbase center: 114 mm Aisle width pallet 1,000 x 1,200 crosswise: 3,186 mm Aisle width pallet 800 x 1,200 lengthwise: 3,311 mm Turning radius: 1,487 mm Smallest pivot point distance: 1,487 mm Mast height retracted: 2,160 mm Mast height extended: 3,742 mm Height over protective roof: 2,035 mm Seat height: 1,058 mm Coupling height: 473 mm MACHINE DETAILS Dimensions & Weight Dimensions: 2,661 x 1,099 x 2,160 mm Own weight incl. battery: 3,125 kg Mast height extended: 3,742 mm Height over protective roof: 2,035 mm Seat height: 1,058 mm Coupling height: 473 mm Voltage: 48 V Capacity: 625 Ah Operating hours: approx. 6,310 h EQUIPMENT UVV 05/26 Charger Nodpjyia Dkofx Ag Iewc Sideshift Seat with seat heating Blue Spot front and rear LED headlights: 2x front, 1x rear Front window with wiper Panoramic roof Digital display Interior mirror Operator’s manual

Condition: good (used), Year of construction: 2021, operating hours: 14,000 h, functionality: fully functional, Professional finishing in the classic digital printing format: This is why we have developed the world's first flatbed die-cutter for the B3+ sheet format KAMA ProCut 58. The versatile professional die-cutting/embossing machine (580 x 400 mm) is extremely versatile. Punching, creasing, scoring, perforating and kiss-cutting labels, blind embossing and Braille as well as hot punching of plastic. Paper from 80 g/m² Nwsdpovfpwwefx Ag Ijc Cardboard max. 800 g/m² Plastic 80 - 800 g/m² (up to 1 mm) Sheet format max 580 x 400 mm Sheet size min 210 x 148 mm Speed* 6,000 sheets/h Punching force 120 t (1.2 MN) Punching format max 570 x 380 mm Gripper edge 10 mm Dimensions (length x width) 2.6 x 1.75 m

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 511903V00414, Year of construction: 2019, operating hours: 6,292 h, load capacity: 1,700 kg, lifting height: 5,750 mm, free lift: 1,880 mm, mast type: duplex, TECHNICAL DETAILS Load capacity: 1,700 kg Load center: 600 mm Load distance: 410 mm Wheelbase: 1,453 mm Free lift: 1,880 mm Lift height: 5,750 mm Fork dimensions: 50 / 100 / 1,150 mm Fork carriage width: 760 mm Fork outside width min./max.: 316 / 620 mm Nwsdsyh Eppopfx Ag Isc MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 2,412 x 1,270 x 2,900 mm Weight: 3,470 kg Length incl. back of forks: 1,262 mm Mast height extended: 6,320 mm Overhead guard height: 2,200 mm Seat height: 1,140 mm Arm height: 308 mm Battery voltage / capacity: 48 V / 620 Ah Mast type: Duplex (side-shift) Operating hours: approx. 6,292 h EQUIPMENT Charger Blue Spot rear Operating manual UVV: 06/26

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: UWID/5000/97, grinding spindle speed: 10,000 rpm, feed rate X-axis: 20 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 20 m/min, center height: 150 mm, TECHNICAL DETAILS Travel X-axis: 600 mm Travel Y-axis: 250 mm Travel Z-axis: 250 mm Feed rate X-axis: 0 - 20 m/min Feed rate Y-axis: 0 - 10 m/min Feed rate Z-axis: 0 - 20 m/min Centre height: 150 mm Usable table area: 980 x 185 mm Grinding head Swivel range: 240° Rotation speed: 120°/s Spindle diameter: 170 mm Spindle speed: 2,000 – 10,000 rpm Workpiece holder A-axis Indexing accuracy: ± 15″ Cumulative indexing error (at ∅ 100 mm): 8 µm Mount: ISO 50 Max. rotational speed: 50 rpm Position measuring systems resolution: 0.0001 mm / 0.0001° Tool magazine: 70 tools MACHINE DETAILS Control: NUM 1050 M with PC; Program memory: 512 KB Drive capacities Grinding spindle motor: 10 kW Table drive X-axis: 1.5 kW Workpiece holder A-axis: 1.5 kW Cross slide Z-axis: 1.5 kW Grinding head column Y-axis: 3 kW Grinding head rotation B-axis: 3 kW Electrical connection Connected load: 23 kW Main fuse: 63 A Operating voltage: 400 V, 50 Hz Control voltage: 24 V Lighting voltage: 230 V, 50 Hz Compressed air Air consumption: 10-12 Nm³/h Pressure min/max: 5/8 bar (500/800 kPa) Compressed air quality: ISO 8573-1, class 4 Ambient temperature Operation: 15°C - 35°C Weight: 7,400 kg Nodpjyh I U Ijfx Ag Iswc Further documentation for the machine is available on request.

Condition: good (used), Wohlenberg 132 TS Paper Cutting Machine Machine in very good condition, ready for production. Year of manufacture 2008. Available immediately from stock. The guillotine can be used as a stand-alone unit or integrated with cutting systems. Program generation takes place in the menu and includes various cutting tasks, e.g. Single cut, Programming, Multiple cut, Non-cutting pressure, Automatic actual value transfer. Premium class cutting machines from the Wohlenberg brand are manufactured in Germany in Solms. Distinguishing features of the Wohlenberg machine: – Interactive user interface – 18.4” touch screen – MIS integration (optional) – USB interface – Ethernet interface – Windows CE operating system – CIP data module – Positioning via electronic handwheel – Optimized cutting cycle – Programmable hold-down pressure – Automatic adjustment of the hold-down pressure to the cutting width – Automated knife change from the front – Quick knife change – New machine body cast in one piece = higher stability – Maintenance-free electromagnetic clutch Technical data: Cutting length: 1320 mm Maximum stack height: 165 mm Nwsdpfxow D E Sas Ag Ioc Infeed depth: 1325 mm Smallest cut with sheet metal under the pressure beam: 77 mm Smallest cut without sheet metal under the pressure beam: 20 mm Maximum saddle feed speed: 300 mm/s Maximum mechanical efficiency of the knife: 44 cycles/min Saddle guidance: above the work table Main engine power: 4.5kW Net weight: 3410 kg The machine is equipped with a spare knife, sticks, a pressure plate, documentation, tools.

Condition: defective spare-parts repository (used), Year of construction: 2007, functionality: not functional, grinding length: 3,150 mm, grinding width: 800 mm, table load: 6,000 kg, grinding spindle motor power: 22,000 W, workpiece height (max.): 650 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Grinding length: 3,150 mm Nsdoylk E Hepfx Ag Iewc Grinding width: 800 mm Max. workpiece height: 650 mm Table surface dimensions: 3,150 x 600 mm Magnetic chuck dimensions: 3,000 x 600 mm Grinding wheel dimensions: 450 x 100 x 127 mm Max. table load: 6 t MACHINE DETAILS Control system: SIEMENS 840D Total power requirement: 70.6 kW Spindle power: 22 kW Dimensions & Weight Installation space required: approx. 11 x 3 x 2.4 m Machine weight: approx. 15 t EQUIPMENT Coolant system 2,500 l Magnetic holding force regulation Semi-automatic balancing system Note: The control unit boots up, but the MININI grinding software does not load for unknown reasons. The control hardware has been checked and is in order. Backup files are available.

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: H-H20140, travel distance X-axis: 610 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 610 mm, rotational speed (max.): 15,000 rpm, number of slots in tool magazine: 24, TECHNICAL DETAILS X-axis travel: 610 mm Y-axis travel: 510 mm Z-axis travel: 610 mm Table size: 760 mm x 510 mm System: SK40 Speed: 15,000 rpm MACHINE DETAILS Machine weight: 4,700 kg Control: Ultimax EQUIPMENT Nwodpfx Agoylk Eye Ijc 24-position tool changer Internal coolant supply (IKZ) Chip conveyor Electronic handwheel

Condition: used, Year of construction: 2022, Horizon Booklet Production Line SPF-200L, FC-200L, VAC-600Ha, VAC-600Hm, VAC-600Hm, VAC-600Hc The Horizon booklet production line featuring the models SPF-200L, FC-200L, is a state-of-the-art, modular solution for the efficient production of saddle-stitched booklets – including A4 landscape format. The system is suitable for both offset and digital printing and is especially designed for small to medium print runs. Thanks to the combination of collating machines (VAC-600Ha, VAC-600Hm, VAC-600Hm, VAC-600Hc), booklet maker (SPF-200L), and front trimmer (FC-200L), the line offers maximum flexibility and productivity in post-press processing. Special Features - Automated Settings: All format and production parameters are automatically set via a large, intuitive color touchscreen – including fold roller gap. - A4 Landscape Capability: The SPF-200L enables the production of booklets in A4 landscape format, making it particularly versatile. - Modular Expandability: The VAC-600 collating towers are modularly expandable from 6 up to 60 stations and allow non-stop operation through double-cycle and insert programs. - High Speed: Up to 9,500 cycles/hour for collating and up to 4,000 booklets/hour for stitching (3,500 in landscape format). - Flexible Configuration: Can be combined with additional Horizon feeders and digital print feeders for hybrid production lines. - Versatile Formats: Processes formats from at least 148 x 120 mm up to a maximum of 610 x 350 mm (SPF-200L). - Robust Wire Processing: Various stitching heads available for different wire gauges and loop stitching. - Easy Operation: Large touchscreens on all main modules for rapid setup and error diagnosis. Technical Specifications - SPF-200L Format Range (min-max): min. 180 x 105 mm, max. 610 x 350 mm - SPF-200L Speed: up to 4,000 cycles/h (3,500 cycles/h landscape) - SPF-200L Features: A4 landscape, fully automatic - FC-200L Format Range (min-max): Front trimmer, integrated - FC-200L Features: Final trimming - VAC-600a/c Format Range (min-max): min. 148 x 120 mm, max. 500 x 350 mm - VAC-600a/c Speed: up to 9,500 cycles/h - VAC-600a/c Number of Stations: 6–60 - VAC-600a/c Features: Modularly expandable, non-stop - Booklet Thickness: up to 100 pages (depending on paper) - VAC-600 Loading Capacity: 55 mm per station - Weight SPF-200L with FC-200L: approx. 831 kg - Machine Dimensions SPF-200L with FC-200L: 4,271 x 810 x 1,250 mm (L x W x H) - Power Supply: 230 V, 5.3 A; 1.0 kW (SPF-200L) Nwedpsxtag Iofx Ag Isc All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Upon request, we can also provide a customized leasing offer. Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 286.001.911.20, working width: 3,000 mm, working length: 6,000 mm, controller model: Global Control S mit 15 Zoll Farb-Touchscreen, No minimum bid – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working area: 3,000 x 6,000 mm Number of cutting torches: 2 Gas flow regulation: available MACHINE DETAILS Installation footprint: 9,000 x 5,000 x 2,000 mm Control: Global Control S with 15-inch color touchscreen Electrical Data Voltage: 3 x 400 V PE/N Frequency: 50 Hz Power: 9 kVA ATTENTION: The Zinser cutting bed is not included in the offer! EQUIPMENT according to the original invoice – details provided without guarantee Nwodpfxjyi Ub Ho Ag Ijc Joystick and handwheel for Global Control S panel Cooling system for the control cabinet Laser diode Heat shield plate without air cooling Track for double-sided longitudinal drive HEB 9 m OmniFlow oxy-fuel supply up to 70 m³/h ALFA machine cutting torch with internal ignition SmartLifter 200 SensoMat ARKI Full gas addressability Light barrier systems Safety device: wheel arch foot switch Energy supply via 9 m energy chain for oxy-fuel Drag chain driver Further technical data from the manufacturer – details provided without guarantee: Track gauge: 4,000 mm Chain height: 500 mm Positioning speed: 50 m/min Operating speed: max. 35 m/min Dimensions & Weight Dimensions (L x W x H): 1,940 x 5,070 x 1,980 mm Machine weight: 2,200 kg

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 516220V00315, Year of construction: 2019, operating hours: 6,239 h, load capacity: 1,600 kg, lifting height: 3,180 mm, free lift: 150 mm, mast type: duplex, Equipment: sideshift, TECHNICAL DETAILS Load capacity: 1,600 kg Load center: 500 mm Load distance: 374 mm Wheelbase: 1,319 mm Lift height: 3,180 mm Free lift: 150 mm Length incl. fork back: 1,861 mm Fork thickness: 40 mm Fork width: 80 mm Fork length: 800 mm Fork carriage width: 980 mm Axle load with load front/rear: 4,160 / 565 kg Axle load without load front/rear: 1,500 / 1,625 kg Ground clearance with load under mast: 290 mm Ground clearance at wheelbase center: 114 mm Working aisle width pallet 1,000 x 1,200 crosswise: 3,186 mm Working aisle width pallet 800 x 1,200 lengthwise: 3,311 mm Turning radius: 1,487 mm Minimum pivot distance: 1,487 mm Mast height retracted: 2,160 mm Mast height extended: 3,742 mm Height over overhead guard: 2,035 mm Seat height: 1,058 mm Coupling height: 473 mm MACHINE DETAILS Dimensions & Weight Dimensions: 2,661 x 1,099 x 2,160 mm Own weight incl. battery: 3,125 kg Mast height extended: 3,742 mm Height over overhead guard: 2,035 mm Nwodpfx Asyia Hfsg Isc Seat height: 1,058 mm Coupling height: 473 mm Voltage: 48 V Capacity: 625 Ah Operating hours: approx. 6,239 h EQUIPMENT UVV 04/26 Battery charger Side shifter Seat with seat heating Blue Spot front and rear LED headlights: 2x front, 1x rear Front windscreen with wiper Panorama roof Digital display Interior mirror Operating manual Note: The upholstery is worn.

Condition: good (used), Year of construction: 2006, Year of Manufacture: 2006 Counter: 0.4 million _____ Nodjw Durcepfx Ag Ijwc Machine Overview: The BOURG BB 3002 is a high-performance perfect binder engineered for efficient and precise bookbinding. Renowned for its robust construction and user-friendly operation, this machine is ideal for medium to large print shops seeking high-quality perfect binding results. _____ Technical Specifications: • Binding Method: Hot melt adhesive perfect binding • Maximum Book Size (height x width): approx. 450 mm x 320 mm (17.7” x 12.6”) • Minimum Book Size (height x width): approx. 105 mm x 120 mm (4.1” x 4.7”) • Maximum Book Thickness: up to 60 mm (2.36”) • Binding Speed: up to 2,000 books per hour (subject to book thickness and operator proficiency) • Spine Preparation: Milling or roughening device for optimal glue adhesion • Glue Application: Hot melt glue system with adjustable temperature settings • Cover Feeder: Manual or semi-automatic (depending on configuration) • Book Clamp: Adjustable clamps for secure holding of the book block during binding • Control System: Electronic controls with display for intuitive operation and monitoring • Dimensions (L x W x H): approx. 3,200 mm x 1,200 mm x 1,600 mm (126” x 47” x 63”) • Power Supply: 400 V / 50 Hz (three-phase) • Weight: approx. 1,500 kg (3,300 lbs) _____

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, total length: 90,000 mm, travel distance X-axis: 2,600 mm, travel distance Y-axis: 4,000 mm, table length: 4,000 mm, table width: 2,600 mm, TECHNICAL DETAILS Travel distance X-axis: 2,600 mm Travel distance Y-axis: 4,000 mm Table length: 4,000 mm Table width: 2,600 mm Maximum glass weight: 260 kg Glass thickness: 4 - 10 mm MACHINE DETAILS Cycle time: 10 pieces/hour Cabin type: SUP-E2-D107/20000 + "D" Total production line length: 90 m Installed power: 1,100 kW EQUIPMENT Loading station with lifter Vertical inlet conveyor WM Vertical washing machine with dryer Vertical inspection conveyor with activation section Tilting table with horizontal transport and vertical inspection Pre-heating section Powder section with belt cleaning Cleaning conveyor Cooling section Tilting table with vertical and horizontal transport Vertical inspection station Nsdjyk S Uyspfx Ag Iewc Unloading station Electrical distribution Deionized water system for the washing machine supply The ovens that may be visible in the pictures are not included in the scope of sale and delivery.