Pretreatment system

Year of construction: 2010, condition: not inspected (used), functionality: unexamined, travel distance X-axis: 8,500 mm, travel distance Y-axis: 480 mm, travel distance Z-axis: 325 mm, rotational speed (max.): 15,000 rpm, No minimum price – guaranteed sale to the highest bidder! Hfodsypbmiopfx Ab Tod TECHNICAL DETAILS X-axis travel: 8,500 mm Y-axis travel: 480 mm Z-axis travel: 325 mm Max. spindle speed: 15,000 rpm Spindle power: 5.5 kW Tool holder: BT 30 MACHINE DETAILS Tool changer: 8 positions EQUIPMENT Tools

Condition: used, max. 590 x 100 x 120 cm length 6.000 mm width 2.200 mm Hfedpfx Asx Hf Hceb Tod height 3.250 mm filling amount max. 13.000 l Wichmann Type 13,000 L impregnation tank or immersion tank for soaking/immersing entire wood packages with hydraulic lift and circulation pump.

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, overall weight: 2,000 kg, rotational speed (max.): 4,700 rpm, TECHNICAL DETAILS Drum diameter: 340 mm Maximum drum speed: 4,700 rpm g-factor: max. 4,198 g MACHINE DETAILS Hfjdpfx Abjymx N Ao Tjd Main motor power: 22 kW Secondary motor power: 11 kW Motor operation: Frequency converter Drive system: Summation drive Inlet and outlet connections: DIN 11864-2 DN40 / DN25 Dimensions & Weight Dimensions (L x W x H): 3,300 x 870 x 1,500 mm Weight: 2,000 kg EQUIPMENT Temperature sensors on both drum bearings Level monitoring for gearbox oil and oil-air lubrication Pressure sensor for oil-air lubrication Vibration monitoring: continuous monitoring of drum bearings on both sides Speed monitoring via proximity sensors Further configuration details can be found in the attached document.

Condition: ready for operation (used), functionality: fully functional, usable tank capacity: 50,000 l, TECHNICAL DETAILS Number of silos: 2 Gross volume: 50 m³ Hfsdjymxynepfx Ab Tjd Diameter: 3,500 mm Cylinder height: 5,000 mm Outlet diameter: 200 mm Roof shape: Conical 15° Bottom: Conical shape, apex angle: 60° EQUIPMENT Lifting eyes Lockable manhole, 600 mm diameter with protective grid Support for over-/underpressure protection DN80 PN10 connection for filling line Connection with blind flange Connection for overflow Connection for level switch

Condition: new, Year of construction: 2024, functionality: fully functional, workpiece weight (max.): 25 kg, product height (max.): 150 mm, product length (max.): 930 mm, product width (max.): 500 mm, production capacity: 100 unit/h, For sale is a new semi-automatic bottom-up bagging system. The system was purchased in 2024, has been dismantled, repackaged, and has never been operated. The original purchase price was €235,000! TECHNICAL DETAILS (according to the manufacturer) Performance: approx. 100 bags/hour Bag weight: 20, 25 kg Bag sizes: bag width 500 mm, bag length 700–930 mm, bag depth 150 mm Bag material: Paper (2–5 layers) with PE inner liner or PE Weighing range: 10–30 kg Weighing accuracy: 2 Sigma +50g/–0g Weighing accuracy: compliant with PTB MACHINE DETAILS Footprint: (approx.) 20 x 4 m Control voltage: 400 V, 50 Hz – 24 DC, 3 phase Electrical power: 15 kW Electrical components: Siemens/Eaton PLC: S7-300 Drive motors/Gearboxes: SEW Pneumatic components: Festo Hodeymxtzepfx Ab Tsfd Material: Stainless steel DIN 1.4301 Cable tray: Brand Cablofill Protection rating: IP54 Zone: ATEX zone, inside zone 20 up to 500 mm radius, zone 21, 500–1000 mm radius, zone 22 Working pressure: 6 bar Compressed air consumption: V = 89 Ndm³/bag Pneumatic connection: 5–6 bar Air requirement: 400 Nl/min Protection class: IP54 Aspiration air: 45 m³/min Note: Additional technical data can be found in the attached order confirmation.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, operating hours: 28,459 h, machine/vehicle number: A0220A2141, controller model: Siemens Sinumerik 840 D, laser power: 4,000 W, sheet thickness (max.): 20 mm, working length: 3,000 mm, working width: 1,500 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working area: 3,000 x 1,500 mm Maximum sheet thickness (mild steel): 20 mm Maximum sheet thickness (stainless steel): 15 mm Maximum sheet thickness (aluminium): 10 mm Laser power: 4 kW MACHINE DETAILS Control: Siemens Sinumerik 840 D Laser type: TruFlow 4000 Laser power: 4 kW Type: CO2 Dimensions & Weight Dimensions (L x W x H): 9,300 mm x 4,600 mm x 2,200 mm Weight: 12,000 kg Operating hours (as of January 2026) Hfodpfxoyttnaj Ab Tsd Beam on hours: 28,459 h Laser on hours: 51,970 h Note: The machine is currently already dismantled.

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, grinding length: 1,850 mm, workpiece weight (max.): 2,700 kg, grinding height: 700 mm, grinding wheel diameter: 450 mm, spindle speed (max.): 1,450 rpm, Machine built in heavy-duty industrial design with very high table load capacity! TECHNICAL DETAILS Longitudinal travel: 2,000 mm Cross travel: 750 mm Longitudinal grinding length: 1,850 mm Cross grinding length: 830 mm Grinding height (vertical): 700 mm Table support: 1,700 mm Maximum longitudinal speed: 39 m/min Maximum cross speed: 4 m/min Maximum cross feed rate (infinitely adjustable): 40 mm/min Maximum grinding spindle speed: 1,450 rpm Grinding wheel dimensions: 450 × 80 × 203 mm Maximum table load: 2,700 kg Magnetic chuck dimensions: 1,700 × 550 mm MACHINE DETAILS Control model: ROSA Grinding wheel motor power: 14.7 kW Hydraulic unit power: 9.4 kW Machine weight: 11,200 kg Noise level: 76 dB(A) Hedpfx Aoymxybjb Tofd EQUIPMENT CNC-controlled movement axes

Condition: ready for operation (used), Year of construction: 2010, operating hours: 47,512 h, functionality: fully functional, travel distance X-axis: 2,230 mm, travel distance Y-axis: 1,400 mm, travel distance Z-axis: 850 mm, controller model: HEIDENHAIN iTNC 435, spindle speed (max.): 6,000 rpm, TECHNICAL DETAILS X-axis travel: 2,230 mm Y-axis travel: 1,400 mm Z-axis travel: 850 mm Table dimensions: 2,000 mm × 1,250 mm Maximum table load: 6,000 kg Spindle speed: 6,000 rpm Tool holder: SK50 Tool magazine capacity: 40 positions Rapid traverse in X / Y / Z directions: 12 m/min MACHINE DETAILS Hfodpfx Ajymxqteb Tod Control model: HEIDENHAIN iTNC 435 Spindle drive power: 38 kW Dimensions & Weight Dimensions (L × W × H): 6,135 mm × 4,338 mm × 4,150 mm Machine weight: 22,000 kg Operating hours (machine): 72,846 h Operating hours (program run): 48,891 h Operating hours (spindle running time): 47,512 h EQUIPMENT Coolant system Internal coolant supply (IKZ) Electronic handwheel Touch probe Automatic workpiece measurement Chip flushing Chip conveyor

Year of construction: 2023, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: H34008-HW, Welding System for Frame Welding of Tinplate Cans with Comprehensive Peripheral Equipment! The new price of the machine was CHF 800,000! The system comprises the following components: - Can Man X7-300 WeldCenter (Serial no.: H34008-HW) - Sheet Transfer and Storage System PowerFEED (Serial no.: H31723) & PowerSTORE (Serial no.: H31503) Hedpfjymxlqsx Ab Tefd - Induction Oven PowerCURE (Serial no.: H33620-HS) - Goudsmit Magnetics Palletising Magnet TPLC12804 - BASCO Leak Tester PRE 1024 GLX - Hyfra SIGMA 28-S Chiller Further configuration details can be found in the attached document. Can Man X7-300 WeldCenter TECHNICAL DETAILS (according to manufacturer) - Production output: 100 – 600 pcs/min - Strip speed: 10 – 100 m/min - Sheet thickness: 0.10 mm – 0.28 mm Can body dimensions: - Min. can body dimensions: Ø 52 x 50 (height) mm - Max. can body dimensions: Ø 153 x 320 (height) mm Goudsmit Magnetics Palletising Magnet TPLC12804 TECHNICAL DETAILS - Product diameter: 65 mm – 230 mm - Product weight: max. 5 kg - Pallet size: 1,200 x 800 mm MACHINE DETAILS - Magnet dimensions: 1,226 x 826 mm Pneumatics: - Working pressure: 6 – 8 bar - Air consumption: 8 L/stroke Ambient temperature: -20°C to 40°C Robot interface: Available Vacuum system: Integrated EQUIPMENT - Interface for robotic arm - Integrated vacuum system for handling sheets between can layers - Perforation pattern for robotic arm - Magnet plate (2x) - Vacuum connection (1x) - Pneumatic tubing (3x) - Sensor connection box Hyfra SIGMA 28-S Chiller MACHINE DETAILS Dimensions & Weight: - Dimensions (L x W x H): 715 x 715 x 1,554 mm - Weight: 210 kg EQUIPMENT - Tank volume: 120L - Scroll compressor - Stainless steel frame construction - Automatic water make-up - Bypass valve - Water level indicator - Pressure gauge in water supply - Dry-running protection pump - Ball valve for tank drainage - Fault indication with digital display - High-efficiency condenser - Metal filter cells

Condition: ready for operation (used), Year of construction: 2004, operating hours: 42,832 h, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 760 mm, controller model: FANUC SERIES 18i MB, clearance between the columns: 2,300 mm, TECHNICAL DETAILS Hjdpfx Abjymxi Ao Tofd Travel X-axis: 3,000 mm Travel Y-axis: 2,100 mm Travel Z-axis: 760 mm Distance between columns: 2,300 mm Table size: 3,020 mm × 2,010 mm Maximum table load: 10,000 kg Spindle taper: ISO-50 Standard spindle speed: 6,000 rpm Max. tool diameter / with empty magazine slot: 127 mm / 215 mm Max. tool length: 350 mm Max. tool weight: 20 kg Tool changer capacity: 32 tools Rapid traverse (X-axis): 20,000 mm/min Rapid traverse (Y-axis): 15,000 mm/min Rapid traverse (Z-axis): 15,000 mm/min Feed rate: approx. 1 – 10,000 mm/min MACHINE DETAILS CNC control: FANUC SERIES 18i MB Spindle motor power (continuous / 30 min): approx. 22 / 26 kW Operating hours, feed time: 42,832 h Operating hours, automatic mode: 53,246 h EQUIPMENT Automatic head changer (with angular milling head) RENISHAW probe

Condition: ready for operation (used), Year of construction: 2004, operating hours: 61,082 h, functionality: fully functional, travel distance X-axis: 2,800 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 800 mm, controller model: HEIDENHAIN TNC 426, Equipment: chip conveyor, In January 2025, a new spindle was installed! The machine has been regularly maintained! TECHNICAL DETAILS Travel range X-axis: 2,800 mm Travel range Y-axis: 1,200 mm Travel range Z-axis: 800 mm Feed rates Rapid traverse: 35,000 mm/min Spindle speed S1 (continuous duty) Vertical: 10,000 rpm Spindle speed S1 (continuous duty) Universal swivel head, 2 axes: 18,000 rpm MACHINE DETAILS CNC Control: HEIDENHAIN TNC 426 Electrical data Supply voltage: 400 V (–15 %, +10 %) Frequency: 50 Hz Current draw: 101.1 A Installed total power: 59.8 kW Operating hours Power-on hours: 98,755 h Program run time: 61,082 h EQUIPMENT High-rigidity gantry design from the FPT DINO series Hodpfxsymw Rls Ab Tjfd Precision linear guides and ball screws Spacious work area with 2.8 m X-axis travel High feed rates for efficient machining Ideal for tool, mold, and machine construction Includes documentation and acceptance certificate according to ISO standards Tool changer Coolant system Chip conveyor Interchangeable milling head with 4th/5th axis