Liquid fertilizer AHL/ASL 100,000 liters

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, cutting speed: 40 mm/min, overall weight: 4,500 kg, workpiece diameter (max.): 150 mm, control type: PLC-controlled, TECHNICAL DETAILS Max. round material: 150 mm Max. flat material: 135 mm Saw blade feed: 0.5 - 40 mm/min Single compartment load max.: 500 kg at 3 m bar length Total load: 4,000 kg Iaodpoygim Eofx Abren Conveyor length: 1,500 mm Conveyor width: 400 mm Conveyor speed: 6.3 m/min MACHINE DETAILS Control: Siemens - PLC control Dimensions & Weight Required space: 9.3 m x 7.5 m Weight: 4,500 kg Total power requirement: approx. 34 kW Voltage: 400 V Air connection: 6 bar EQUIPMENT Infeed magazine Cut-off disposal Compartments incl. roller conveyor: 11 pcs Conveyor manufacturer: Geppert

Condition: new, 900 mm 900 mm 900x900 mm saw band length 9300 x 67 x 1,1 mm table height 790 mm band speed 14 - 60 m/min total power requirement 11 kW weight of the machine ca. 8,45 t dimensions 4,485 x 1,68 x 3,15 m The semi-automatic, hydraulic saws from the X-tech line offer the best Saw technology and best performance when cutting special steels • The electro-welded machine frame and the steel saw frame meet requirements all cutting needs and eliminate vibration and noise. • The chip conveyor is hydraulically driven and the speed is adjustable • All movements of the machine (saw frame, vice, feed, Saw band guides) are carried out thanks to modern linear guides with high static and dynamic load performance, which also has very low sliding friction to guarantee. • Another characteristic feature is the roles for the Positioning of the material by a hydraulic motor are driven. They move at right angles to the material, and thus allowing optimal clamping of the material. • Thanks to the height control of the saw band position, the operator can place the band in place near the top edge of the material. After the cut is finished, the tape automatically raised back to the previous position. Alternatively you can also “Remain” can be selected in the lower position. During the The software compares the cutting load with the cutting cycle Default. This means that the sawing system can be stopped in the event of irregularities become. • The saw band is cleaned by two adjustable steel brushes. The drive takes place hydraulically. • The hydraulic unit including filter and pressure gauge guarantees one particularly quiet operation at constant pressure. • Finely ground carbide inserts that clamp the saw blade, complete with lateral, hardened and adjustable guide rollers. The adjustable one The tape guide automatically moves as close as possible to the material. Iodpfx Aefg E Hpsbroan • The saw band is tensioned via a hydraulic cylinder, which is carried out by the Machine software is controlled. The voltage is set according to a given Time automatically delimbed when the machine is idle or after a cycle has been carried out. • Automatic version with CNC control in the X-TECH 900 / 1200 models a feed length of 500 mm for the series for high production rates. • The material is carried by a table with seven rollers. These will driven by a hydraulic orbital motor through which the material can be placed precisely even under maximum load. • All guided movements are carried out by four recirculating ball guides with one high capacity for static and dynamic loading; strong reduced feed friction. Tempered and ground prismatic Guides. Price on request.

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, load capacity: 420 kg, arm reach: 3,326 mm, controller model: KRC2 ed05, repeat accuracy: 0.06 mm, number of axes: 6, Auction of a set consisting of 1x KUKA KR500 L340-2 & 1x KUKA KR500 L420-2! TECHNICAL DETAILS Rated payload KR500 L340-2: 340 kg Rated payload KR500 L420-2: 420 kg Reach KR500 L340-2 max.: 3,326 mm Reach KR500 L420-2 max.: 3,076 mm Repeatability (ISO 9283): ±0.06 mm Range of motion A1: ±185° A2: -40° / +110° A3: -184° / +60° A4: ±350° A5: ±118° A6: ±350° Iedoygia Sjpfx Abroan Speed at rated payload A1: 69 °/s A2: 69 °/s A3: 69 °/s A4: 77 °/s A5: 76 °/s A6: 120 °/s MACHINE DETAILS Controller: KRC2 ed05 Number of axes: 6 Mounting position: Floor Ambient temperature (storage/transport): -40 °C to 60 °C EQUIPMENT Manipulator KRC2 ed05 control cabinet Complete cable set Teach pendant

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 1111074, travel distance X-axis: 1,524 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 635 mm, table length: 1,575 mm, spindle speed (max.): 7,500 rpm, No reserve price – guaranteed sale to the highest bidder! Iaodpfx Aoyf E D Rsbrjn TECHNICAL DETAILS Travel X-axis: 1,524 mm Travel Y-axis: 660 mm Travel Z-axis: 635 mm Table size: 1,575 x 584 mm Spindle speed: 7,500 rpm Spindle taper: CAT40 MACHINE DETAILS Control: Haas Motor power: 30 HP EQUIPMENT 20-position tool changer (ATC)

Condition: used, Number of boring spindles 5 St. Working width 230 mm Isdpfxjrmvhfs Abrsan Working height 160 mm

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2001, operating hours: 4,323 h, machine/vehicle number: GS-39441, load capacity: 567 kg, overall weight: 3,553 kg, fuel type: diesel, working height: 10,000 mm, Equipment: CE marking, TECHNICAL DETAILS Load capacity: 567 kg Working height: 10 m Iasdpfx Ajyfm E Njbron MACHINE DETAILS Type: Diesel Weight: 3,553 kg Operating hours: 4,323 h EQUIPMENT CE marking

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2003, operating hours: 2,962 h, load capacity: 567 kg, working height: 10,000 mm, Equipment: CE marking, TECHNICAL DETAILS Load capacity: 567 kg Working height: 10 m MACHINE DETAILS Isdpfsyfm A Isx Abrean Type: Diesel Operating hours: 2,926 h FEATURES CE marking

Condition: new, turning diameter over bed 410 mm turning diameter over slide rest 240 mm turning length 1000 mm turning diameter in the gap 530 mm turning speeds 65 - 1810 U/min centre height 205 mm spindle bore 52 mm tailstock quill taper MT 4 total power requirement 2,2 kW weight of the machine ca. 0,9 t dimensions of the machine ca. 1,9 x 0,8 x 1,3 m Center lathe with: 3-axis digital measuring system fully assembled electromagnetic main spindle brake auto. Feed in longitudinal and transverse direction safety relay Micrometer end stop coolant device 3-jaw lathe chuck with 1 set of turning and drilling jaws German operating instructions. Isdpfx Aem Rlb Nobroan

Condition: ready for operation (used), functionality: fully functional, overall weight: 12,955 kg, Year of construction: 2004, operating hours: 7,930 h, load capacity: 3,500 kg, arm reach: 13,200 mm, working height: 16,000 mm, machine/vehicle number: 175101313274, TECHNICAL DETAILS Lifting capacity: 3,500 kg Working height: 16 m Max. outreach: 13.20 m MACHINE DETAILS Weight: 12,955 kg Operating hours: 7,930 h EQUIPMENT Pallet holder Iaedpfjyfmw Sex Abron Registration ITV CE marking

Condition: ready for operation (used), functionality: fully functional, overall weight: 707 kg, Year of construction: 2004, roll width: 650 mm, Equipment: CE marking, No minimum price – guaranteed sale to the highest bidder! Isdpjyfmr Nofx Abrjan TECHNICAL DETAILS Roller width: 650 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 2,320 x 760 x 1,210 mm Weight: 707 kg EQUIPMENT CE marking

Condition: excellent (used), 200m3 stainless steel tanks Number of items: 3 180m3 stainless steel tanks The diameter is 4.70m Height without legs is 14m 4,1mm wall thickness Iodofngl Njpfx Abrean 5,1 bottom thickness We offer transport with our specialized trailer to every region of Europe!

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2003, operating hours: 5,190 h, load capacity: 230 kg, arm reach: 17,000 mm, working height: 22,000 mm, Equipment: CE marking, TECHNICAL DETAILS Working height: 22 m Horizontal outreach: 17 m Load capacity: 230 kg MACHINE DETAILS Engine power: 56 HP Climbing ability: 40 % Platform rotation range: 360° Operating hours: 5,190 h EQUIPMENT Ijdpfoyfmqrox Abrjan 4x4 drive CE marking

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2003, operating hours: 4,760 h, machine/vehicle number: S60-8941, load capacity: 227 kg, empty load weight: 13,104 kg, working height: 22,000 mm, Equipment: CE marking, TECHNICAL DETAILS Working height: 22 m Horizontal reach: 17 m Load capacity: 227 kg Iedpfxjyfmndj Abrjan MACHINE DETAILS Engine power: 56 hp Climbing ability: 40% Drive: 4x4 Platform rotation angle: 360 degrees Weight: 13,104 kg Operating hours: 4,760 h EQUIPMENT CE marking

Condition: new, capacity 90 degrees: round 510 mm capacity 90 degrees: square 450 mm 650x450 band speed 15 - 100 m/min table height 844 mm dimensions of saw-band 5320 x 34 x 1,1 mm total power requirement 3,0 kW weight of the machine ca. 2,1 t dimensions of the machine ca. 1,9 x 2,87 x 1,3 m PROMOTIONAL PRICE!!! 2-column double miter band saw K-tech DG 62/45 HA-I Iaodpfjd Iipmjx Abrsn • 2-column miter saw • Solid, yet easy to use • Material height sensor (automatic cut start detection) • Smooth running thanks to diagonal cutting, feed regulator + cutting pressure regulator • Solid material inlet roller • Removable chip tray (disinfection) • Energy-saving and low-vibration thanks to diagonal cutting • Control panel ergonomic, safe and free-standing • Frequency-controlled saw drive 15 -100 m/min. • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vice • LEDs for monitoring all safety functions • Large-sized wheels (520 mm) a. • Clear miter adjustment up to 60° Semi-automatic function: 1. Tension the material 2. Saw starts 3. Lowering in rapid traverse to the beginning of the material or the same for series cutting cut 4. Saw blade off 5. Raise the frame until it is just above the material 6. Vice opens

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2002, operating hours: 5,006 h, machine/vehicle number: 504541, load capacity: 250 kg, empty load weight: 8,450 kg, fuel type: diesel, working height: 16,500 mm, Equipment: CE marking, TECHNICAL DETAILS Iaedpfsyfmhdjx Abrsn Working height: 16.50 m Load capacity: 250 kg MACHINE DETAILS Type: Diesel Dimensions & Weight Dimensions: 5,450 x 2,360 x 2,380 mm Weight: 8,450 kg Operating hours: 5,006 h EQUIPMENT CE marking