WIG welding unit, WIG welding machine, WIG and electro DC welding unit, E-welding machine also suita

L-TEC TIG 200 DC

Condition: new, 900 mm 900 mm 900x900 mm saw band length 9300 x 67 x 1,1 mm table height 790 mm band speed 14 - 60 m/min total power requirement 11 kW weight of the machine ca. 8,45 t dimensions 4,485 x 1,68 x 3,15 m The semi-automatic, hydraulic saws from the X-tech line offer the best Saw technology and best performance when cutting special steels • The electro-welded machine frame and the steel saw frame meet requirements all cutting needs and eliminate vibration and noise. • The chip conveyor is hydraulically driven and the speed is adjustable • All movements of the machine (saw frame, vice, feed, Saw band guides) are carried out thanks to modern linear guides with high static and dynamic load performance, which also has very low sliding friction to guarantee. • Another characteristic feature is the roles for the Positioning of the material by a hydraulic motor are driven. They move at right angles to the material, and thus allowing optimal clamping of the material. • Thanks to the height control of the saw band position, the operator can place the band in place near the top edge of the material. After the cut is finished, the tape automatically raised back to the previous position. Alternatively you can also “Remain” can be selected in the lower position. During the The software compares the cutting load with the cutting cycle Default. This means that the sawing system can be stopped in the event of irregularities become. • The saw band is cleaned by two adjustable steel brushes. The drive takes place hydraulically. • The hydraulic unit including filter and pressure gauge guarantees one particularly quiet operation at constant pressure. Cjdofg E Hpopfx Afpsgn • Finely ground carbide inserts that clamp the saw blade, complete with lateral, hardened and adjustable guide rollers. The adjustable one The tape guide automatically moves as close as possible to the material. • The saw band is tensioned via a hydraulic cylinder, which is carried out by the Machine software is controlled. The voltage is set according to a given Time automatically delimbed when the machine is idle or after a cycle has been carried out. • Automatic version with CNC control in the X-TECH 900 / 1200 models a feed length of 500 mm for the series for high production rates. • The material is carried by a table with seven rollers. These will driven by a hydraulic orbital motor through which the material can be placed precisely even under maximum load. • All guided movements are carried out by four recirculating ball guides with one high capacity for static and dynamic loading; strong reduced feed friction. Tempered and ground prismatic Guides. Price on request.

Condition: new, Year of construction: 2025, functionality: fully functional, Hall construction using modular building methods in any desired dimensions for flexible space utilization. Depending on your needs, the halls can be future-proofed at any time by being expanded, downsized, or having their layout modified. With clear spans of up to 100 m without intermediate supports, we offer you the optimal solution for your building requirements. Cgjdpsxqzhnjfx Afpjn As a DEUTSCHE INDUSTRIEBAU customer, you benefit from over 45 years of experience, high-quality materials, and intelligent design concepts. Visit our showroom with 150,000 m² of display area on the B1 in 59590 Geseke, in the heart of Westphalia. We are your reliable partner for innovative hall construction.

Condition: reconditioned (used), Year of construction: 1999, Universal Tool Milling Machine TOS FNGJ 32 3-axis Heidenhain digital readout Year of manufacture: 1999 Travel: X 600 Y 400 Z 400 mm Spindle speed range: 40 – 2000 rpm Supplied with the following accessories: Fixed angle table, 800 x 400 mm clamping surface Vertical milling head Extendable quill Various SK 40 tool holders Safety guard Chip tray Machine lamp Automatic central lubrication pump for X, Y, Z axes Coolant system Csdexc It Ijpfx Afpegn 4 machine leveling pads

Condition: good (used), Year of construction: 2002, From company liquidation: Peddinghaus Peddimax 1002 Year of manufacture 2002 Max. Punching and shearing capacity: 1000 kN Punches 31 mm holes in 25 mm steel Shears on the flat steel shear to 500 mm up to a material thickness of 18 mm steel Contact length stop Many accessories (special punches) Special punching device SV 90 up to 90 mm holes Weight: approx. 3,000 kg Cgsdjt Iklkspfx Afpsn

Condition: good (used), functionality: fully functional, Year of construction: 2012, machine/vehicle number: 778 F 319, Lazer Cutting Fabrikat: Prima Power Cgsdpfx Afomx Rrljpon Typ: Palatino 1530 Baujahr: 2012

Condition: used, Year of construction: 1995, turning diameter over bed slide: 500 mm, Universal lathe Make: ZMM Type 500 Year: 1995 Technical Data Manufacturer: ZMM Sliven Model: Universal 500 Year of manufacture: 1995 Centre distance: 1000 mm Swing over bed ø: 500 mm Spindle bore: 73 mm Dimensions (L x W x H): 2.7 x 1.2 x 1.8 m Weight approx.: 3100 kg Cgjdpfx Aewudhujfpen Equipment • 3-jaw chuck Röhm ZS 350 mm • Quick-change toolpost • Live center • Coolant pump • Machine lamp All information subject to change. A live demonstration under power is possible at any time in our showroom.

Condition: new, turning diameter over bed 410 mm turning diameter over slide rest 240 mm turning length 1000 mm turning diameter in the gap 530 mm turning speeds 65 - 1810 U/min centre height 205 mm spindle bore 52 mm tailstock quill taper MT 4 total power requirement 2,2 kW weight of the machine ca. 0,9 t dimensions of the machine ca. 1,9 x 0,8 x 1,3 m Center lathe with: 3-axis digital measuring system fully assembled electromagnetic main spindle brake auto. Feed in longitudinal and transverse direction Cjdpfx Afsm Rlb Nepegn safety relay Micrometer end stop coolant device 3-jaw lathe chuck with 1 set of turning and drilling jaws German operating instructions.

Year of construction: 2025, condition: new, Ultrasonic bath UEC 300 is industrial solution for cleaning large and heavy parts that are very dirty. The machines contain a pneumatic elevator capacity of 200 kg. Working frequency is 28kHz with sweep technology. The machine consists of a main ultrasonic bath with three side ultrasonic piezo transducers and second, overhead bath with oil separator. Control is with high quality touch screen HMI with 3D display notifications. Complete bath is made from acid resistance stainless steel AISI304 thickness 2mm. ----- Characteristics : Platform size : 900x570mm Maximum load : 200 kg. Useful height : 400mm Ultrasonic power : 3kW(6kWp-p) Ultrasonic frequency 28 kHz with sweep mode Heater power : 9kW FEATURES : Touch screen 7 " with 3D notification Automatic water filling system. Automatic elevator mode work Level sensor Elevator position sensors Cover sensor Codpfx Afogd Uifspegn Warranty : 2 years. WE HAVE AND OTHER MODELS ON STACK

Condition: new, ELMAG Portable Powerstation ENERGY 1200, LiFEPO4 battery with 992Wh ENERGY 600 - 2400 The new ENERGY series comprises 4 performance sizes of portable power stations for a mains-independent power supply and emergency power supply for your consumers. The extensive range of applications covers all areas of use. Whether for camping, at festivals, as a power source for sales stands or as a self-sufficient emergency power solution in the event of a blackout, the ELMAG Powerstations are always your reliable companion. Display - Battery capacity in % and segments - Remaining runtime - Power output - Power consumption - Output status - Symbol display for protective function Features Outlets: - 2x Schuko 230 Volt - 1x 12V KFZ 10 A - 1x 12V round 10 A - 1x USB-C 60 W - 1x USB-C 18 W - 2x USB-A QC3 Inputs: - 1x 7909 12V - 30V - 1x 12V car 10 A LED light 7W Digital display Protection class IP21 Protective functions: - Deep charge - overvoltage - overcharge - short circuit - Overtemperature - Undertemperature Cgedpfx Aet Hv Axefpon 1x mains adapter 200W included in delivery 1x car charging cable included ADVANTAGES Lithium iron phosphate battery (LIFEPO4) for maximum safety and durability Also ideal for operation in high ambient temperatures High cycle stability > 2500 cycles 3 charging options: Solar, 230V and 12V Intelligent battery management system with extensive protection functions against undervoltage, overvoltage, overheating, short circuit and overcharging Extensive connection options: Schuko 12V DC, USB-A, USB-C etc. Digital display with detailed status monitoring Integrated MPPT solar charge controller Simultaneous charging and discharging possible Internal lighting with SOS function TECHNICAL DATA Battery type LIFEPO4 Battery capacity 0.992 kWh Voltage type pure sine wave Dimensions LxWxH 330x289x220 mm Weight 11 kg Maximum power 1~230V 3600 W Continuous power 1~230V 1200 W Maximum charging power 200 W

Condition: new, capacity 90 degrees: round 510 mm capacity 90 degrees: square 450 mm 650x450 band speed 15 - 100 m/min table height 844 mm dimensions of saw-band 5320 x 34 x 1,1 mm total power requirement 3,0 kW weight of the machine ca. 2,1 t dimensions of the machine ca. 1,9 x 2,87 x 1,3 m PROMOTIONAL PRICE!!! 2-column double miter band saw K-tech DG 62/45 HA-I • 2-column miter saw • Solid, yet easy to use • Material height sensor (automatic cut start detection) • Smooth running thanks to diagonal cutting, feed regulator + cutting pressure regulator • Solid material inlet roller • Removable chip tray (disinfection) • Energy-saving and low-vibration thanks to diagonal cutting • Control panel ergonomic, safe and free-standing • Frequency-controlled saw drive 15 -100 m/min. • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vice • LEDs for monitoring all safety functions • Large-sized wheels (520 mm) a. • Clear miter adjustment up to 60° Semi-automatic function: 1. Tension the material 2. Saw starts 3. Lowering in rapid traverse to the beginning of the material or the same for series cutting cut 4. Saw blade off 5. Raise the frame until it is just above the material Codpfxed Iipmo Afpogn 6. Vice opens