T-slot plate

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, cutting range round steel at 90°: 400 mm, cutting length (max.): 760 mm, working height: 720 mm, saw band length: 5,920 mm, TECHNICAL DETAILS Saw band dimensions: 5,920 x 41 x 1.3 mm Cutting speed: steplessly adjustable (1:7) Working range (round): max. 400 mm Working range (square): 400 x 370 mm Cutting length (single stroke): 10 - 760 mm Cutting length (multiple strokes): max. 9,999.9 mm Working height: 720 mm Clamping force: 3,600 N Minimum finished part length: 10 mm (35 mm vertical) Note: Dismantling and loading can be offered by the seller at an additional cost. Roller conveyor is not included. Kedpfx Abeyzn Hbegjdk

Year of construction: 2018, condition: new, loading capacity: max. 1.000 Kg. coil inside diam.: min. 400 mm coil outside diam.: max. 1.100 mm Kododx Ryyepfx Abgsdk coil hight: max. 800 mm

Year of construction: 2003, operating hours: 10,600 h, condition: repair required (used), functionality: limited functionality, machine/vehicle number: 6094, Equipment: centralized greasing system, Spare parts donor! TECHNICAL DETAILS Coarse screen deck: 120/150 Fine screen deck: 10/25 MACHINE DETAILS Generator voltage: 400 V / 50 Hz Weight: 20,000 kg Kdodpfx Aoyzznlobgjk Engine operating hours: approx. 10,600 h EQUIPMENT Trailer Hopper Magnetic drum for mid-size fraction conveyor Magnetic drum for oversize fraction conveyor Clip-on chute Hydraulic rear support Direct connection Central lubrication system Generator 50 mm drawbar eye Note: The engine starts but shuts off again after a while. Presumably there is a fuel issue. The generator produces power. The machine is currently not roadworthy as it has been stationary for a long time. Road registration is currently not possible.

Condition: ready for operation (used), Year of construction: 2007, operating hours: 19,357 h, functionality: fully functional, spindle speed (max.): 12,000 rpm, travel distance X-axis: 800 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 510 mm, controller model: Fanuc Series 31i-Model A5, TECHNICAL DETAILS X-axis travel: 800 mm Y-axis travel: 520 mm Z-axis travel: 510 mm Milling spindle: 12,000 rpm Tool holder: Capto C6 Rapid traverse: 60 m/min MACHINE DETAILS Kjdpfsyw I Htox Abgedk Control: Fanuc Series 31i-Model A5 Chain tool magazine: 48 positions Additional magazine: 90 positions Operating hours Total operating hours: approx. 48,974 h Machining time: 19,357 h EQUIPMENT Coolant system Chip conveyor Note: Clara extraction unit is not included in the scope of delivery.

Condition: repair required (used), Maho MH 900 C without housing Control: CNC 432 (V9) - working range X/Y/Z: 1000mm/500mm/650mm - Rigid angle table: 1150mm x 650mm Kdedpfxofgg Aao Abgsk - Maximum table load: 900 Kg - Spindle mounting: SK50 - Speed: 40 - 1600 rpm - Feed rate: 5 - 2.000mm/min - Rapid traverse: 6 m/min - Space requirement: L-3500mm, W-4185mm, H-2146mm Y-axis is not displayed but moves

Condition: not inspected (used), Year of construction: 2000, operating hours: 8,523 h, functionality: unexamined, travel distance X-axis: 1,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 22, No reserve price – guaranteed sale to the highest bidder! Bidding obligates the buyer to collect the machine on time, either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026! TECHNICAL DETAILS Travel distance X: 1,000 mm Travel distance Y: 500 mm Travel distance Z: 500 mm Table dimensions: 1,150 x 490 mm Kdjdpeyn Nwtefx Abgsk Number of tool positions in the magazine: 22 Spindle taper: SK 40 (DIN 69871-A40) Max. spindle speed: 10,000 rpm MACHINE DETAILS Control: HEIDENHAIN TNC 426 Dimensions & Weight Dimensions (L x W x H): 4,500 x 3,500 x 2,700 mm Weight: 4,200 kg Operating Hours Automatic operation: 8,523 h Control on-time: 71,860 h EQUIPMENT Technical documentation Spare parts (as shown in the pictures) Note: Only a 7.5t truck can turn around on the company premises. It is recommended to send a smaller truck for collection.

Condition: not inspected (used), Year of construction: 2001, functionality: unexamined, machine/vehicle number: 822441, travel distance X-axis: 1,020 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 600 mm, controller model: HEIDENHAIN TNC 410 PA, spindle speed (max.): 6,000 rpm, No reserve price - guaranteed sale to the highest bidder! By placing a bid, you are obliged to collect the item on time, either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026! TECHNICAL DETAILS Travel distances Travel X: 1,020 mm Travel Y: 510 mm Travel Z: 600 mm Spindle speed range: 40–6,000 rpm Drive power: 13 kW Spindle taper: BT 40 Number of tool stations in the tool changer: 22 Rapid traverse X and Y axes: 40 m/min Rapid traverse Z axis: 30 m/min Work table Length: 1,150 mm Width: 490 mm Kdedpfx Aeyn Nvvjbgsk MACHINE DETAILS Control system: HEIDENHAIN TNC 410 PA Dimensions & Weight Dimensions (L x W x H): 2,800 x 2,400 x 2,400 mm Weight: 4,800 kg EQUIPMENT 3D probe Note: The machine vices mounted on the work table and the tool holders, including the tools installed in the tool magazine and spindle, are not included in the scope of sale and delivery. The oil mist extractor, which may be visible in the photos, is also not included in the scope of sale and delivery.

Condition: new, Year of construction: 2025, The laser processing center skyCUBE M - the new standard in laser material processing! PFEIFER laser processing center skyCube M Laser machine with 200W CO2 laser available immediately Mclass = machining area X 1250 x Y 650 x Z 300 mm skyCUBE M laser processing center - the new Mclass multifunctional laser engraving machine and laser cutting machine - laser processing simple - high precision - laser engraving, cutting with high speed and quality. Our new and best multifunctional talent not only impresses the most experienced user with its newly thought-out design. This CO2 laser / fiber laser shows its outstanding capabilities as a CO2 or fiber engraving laser as well as a CO2 or fiber cutting laser in all industrial applications. With an optional laser power of up to 1000W (1kW), the CO2 laser device / fiber laser system can also be used extremely flexibly in your production. skyCUBE laser devices meet all the requirements of class 1 according to DIN EN 60825-1 and thus offer you the highest level of safety. Depending on the selected and installed laser power, this CO2 laser / fiber laser is ideally suited for cutting and engraving many materials, such as: various metals, acrylic glass, solid wood, etc. Wood materials, wood composite materials, paper, cardboard, various plastics and Foams, textiles, and much more. The excellent execution of the laser machine 100% produced in Plauen guarantees the laser user from metal construction to the laser source a high level of work accuracy with consistently high quality. With a cutting speed of up to 8000 mm / s and an engraving speed of up to 4000 mm / s, high-quality laser technology produces clean and very sharp cutting edges and precise laser engravings. The ergonomic design with a pull-out work table makes it easier to load the system. A drawer in the lower part of the machine is used to collect the clippings. User-friendly and intuitive - the supplied skyCUBE PC software (ready for Windows®). A simple, practical user interface adapted to the Windows standard lets you work quickly and effectively. The software is characterized by high system stability, professional monitoring with appropriate machine operation and control as well as compatibility with common file formats. The data is output over levels - separately for each level, including the definition of the sequences and the type of processing. The parameters, such as laser power and processing speed, are automatically saved for each level and can thus be reproduced in a material database at any time. The laser projects are transferred to the skyCUBE M laser processing center with a computer connected via LAN / USB interface. From there these can be processed repeatedly without the PC having to be switched on. A modern touch control panel gives you access to all system information and functions. The skyCUBE M laser processing center at a glance: Kdodpfx Abe Sfanogjk German industrial standard machine steel construction for the safe and vibration-free mounting of the laser components and axis systems, on rollable industrial leveling feet 8 "touchscreen display simply see more, control more, communicate more with the skyCUBE M laser processing center Redundant safety system - class 1 laser Security: Shutter - ᐳ active mechanical beam path closure

Condition: not inspected (used), functionality: unexamined, No minimum price – guaranteed sale to the highest bidder! Bidding commits you to timely collection, either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026! TECHNICAL DETAILS Contents: Kodpfx Ajyn Ibwebgedk - Mounted vice (jaw width: 150 mm) - Belt sander (Manufacturer: FERM, belt width: 100 mm, disc diameter: 150 mm) - Clamping jaws - Dies - Tap sets MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 3000 x 1100 x 1200 mm Weight: 350 kg Note: The sale does not include the drill press or tapping arm currently on the workbench. External reference: Pieper – Lot 67

Condition: not inspected (used), functionality: unexamined, throat depth: 1,200 mm, machine/vehicle number: 94023588, No minimum price – guaranteed sale to the highest bidder! Kdjdpfx Asyn H Rdjbgjk Placing a bid obligates you to collect the item on time, either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026! TECHNICAL DETAILS Reach: 1200 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1200 x 1000 x 700 mm Machine weight: 80 kg External reference: Pieper - Lot 68

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, travel distance X-axis: 3,200 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,000 mm, table width: 1,000 mm, table length: 3,500 mm, ZAYER bed type milling machine in good working condition. Specifications: X-axis travel: 3200mm Kdsdpfew Uha Hox Abgek Y-axis travel: 1200mm Z-axis travel: 1000mm milling head taper: ISO 50 control: Heidenhain TNC410 table size: 3500x1000mm year of manufacture: 1999

Condition: not inspected (used), functionality: unexamined, plate length: 630 mm, plate width: 630 mm, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates you to collect the item on time, either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026! TECHNICAL DETAILS Kdodpfxjyn H Hls Abgjk Plate dimensions: 630 mm x 630 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 630 x 630 x 950 mm Weight: 150 kg External reference: Pieper - Lot 75

Condition: not inspected (used), functionality: unexamined, plate length: 630 mm, plate width: 630 mm, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates you to timely collection either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026! TECHNICAL DETAILS Plate dimensions: 630 mm x 630 mm MACHINE DETAILS Kdsdpoyn Hwqofx Abgok Dimensions & Weight Dimensions (L x W x H): 630 x 630 x 920 mm Weight: 100 kg External reference: Pieper - Lot 103

Condition: used, Year of construction: 1987, Technical details: grinding length: 600 mm grinding width: 350 mm workpiece height: 600 mm feed: 1 - 30 m/min magnetic plate size: 610 x 255 mm distance table - spindle center: min./max. 150 / 420 mm grinding spindle speed: 3000 U/min stroke of the table: min./max.: 200 / 650 mm total power requirement: ca. 4,0 kW weight of the machine ca.: 2,5 t dimension machine xH: 1,5 x 1,9 x 2,0 m dimension coolant device LxWxH: 0,63 x 0,40 x 0,65 m Headstock: -vertical travel Y = 0.002 - 0.06 mm -adjustment = 0,001 - 2mm Cross slide: -transverse travel Z = 360mm -feed adjustment = 1 - 60mm/stroke -rapid traverse = 1.2 m/min. Dressing manual Cooling water unit with capacity 140Liter Equipment: -3x support feet -machine lighting Kdjdpfxju Ngice Abgsk accessories: -alignment device for grinding wheel holder *

Condition: not inspected (used), functionality: unexamined, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect within the specified period, either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026! TECHNICAL DETAILS Available in different sizes MACHINE DETAILS Ksdpfx Ajyn Hq Rjbgodk Dimensions & Weight Dimensions (L x W x H): 800 x 600 x 50 mm Weight: 30 kg External reference: Pieper - Lot 125