Circular Saws

Condition: ready for operation (used), Year of construction: 2023, operating hours: 119 h, functionality: fully functional, machine/vehicle number: 217, fuel tank capacity: 500 l, conveyor belt speed: 3,000 mm/s, filling opening width: 3,374 mm, Doppstadt Inventhor 6 with only 119 operating hours and comprehensive additional equipment! TECHNICAL DETAILS Number of shredding teeth: 20 Shredding system type: Size L Iodpfx Aeyg Irasbrehu Feed hopper loading height: 3,650 mm Feed hopper loading width: 3,374 mm Rear discharge conveyor Width: 1,000 mm Length: 7,000 mm Discharge height: 4,209 mm Belt speed: 1.25 – 3.0 m/s Cross conveyor length: 2,900 mm Cross conveyor width: 800 mm MACHINE DETAILS Chassis: 3-axle drawbar trailer unit Drive Engine type: Diesel-hydraulic Brand: MTU 6R1000 Rated power: 260 kW (353 hp) Emission standard: Stage V Fuel tank capacity: 500 l Transport dimensions (L x W x H): 9,141 x 2,540 x 3,604 mm Permissible total weight: 25,000 kg Permissible axle load: 9,000 kg per axle Operating hours: 119 h EQUIPMENT Basic Inventhor Type 6 package Load-sensing system Centrally arranged lubrication strips 24-V electric control - additional electric pump for operating the following functions when the engine is off: - Raise/lower/fold rear discharge conveyor - Open/close comb flap - Open/close comb - Raise/lower folding hopper Full radio remote control Large side GRP service doors Service-friendly engine compartment LED lighting package for engine compartment and rear Hydraulically reversible cooling fan Three-sided loading protection Folding hopper Fire extinguisher Service ladder Toolbox Acoustic start-up warning Doppstadt telematics system Shredding system Size L - 20 teeth Size L limiter Auxiliary hydraulic connection 35 - 80 l/min Hydrostatic drive 350 mm hopper extension, dual-sided watering provision 7 m rear discharge conveyor Neodymium cross belt magnet Frame for 7 m cross belt magnet

Condition: excellent (used), Storti RM 500 edger - Italian production - year of production 1993 Ihsdpfx Aek Talpebrsu - electric spacing of discs TECHNICAL PARAMETERS: - cutting width max 435 mm - cutting height max 170 mm - engine power 2 x 22kW - max element width 600 mm - minimum material length 800 mm - max disc diameter 600 mm - spindle diameter 40 mm - two upper pulling rollers - one upper pressure roller - roller motor power 2 x 1.1 kW - roller pressure with automatic jump - seven bottom pulling toothed rollers - electric disc adjustment - two lasers - feed speed 25 and 50 m/min - feeding table 2950 mm - receiving table 3000 mm - drive rollers D100 mm - power of the roller feed motor 2 x 1.5 kW Transport dimensions 500x240x180 cm weight 3500 kg

Condition: ready for operation (used), functionality: fully functional, controller manufacturer: Klöckner-Möller und SPS-Siemens, workpiece length (max.): 2,500 mm, workpiece width (max.): 850 mm, workpiece weight (max.): 50 kg, stack height: 1,200 mm, Auction of a Feeding and Stacking System for the Furniture Industry! Bargstedt TBH20/ER/25/08/S (Single-Sided Feeding Station, Machine No. 0-280-07-7582) - 1 powered stacking roller conveyor - 1 lift table with powered stacking roller conveyor - 1 vacuum suction carriage (minimum workpiece dimensions: 280 x 230 mm) - 1 stripper plate - 1 central thickness adjustment for the suction carriage - 1 height-adjustable belt conveyor - 1 infeed roller track with inclined supporting rollers - Suction beam (2-lane operation, max. 4 parts in sequence) TECHNICAL DETAILS Stack height: 1200 mm Stack changeover time: 35 sec Max. basic output: 17 cycles/min Max. workpiece weight: 50 kg Workpiece length: 600 - 2,500 mm Workpiece width: 300 - 850 mm MACHINE DETAILS Control system: Klöckner-Möller and Siemens PLC Total connected load: 14 kW Compressed air consumption: 81 NL/min Operating pressure: 6 bar Bargstedt TDK 10/25/10 (Turning Station, longitudinal to crosswise, Machine No. 0-282-07-7584) TECHNICAL DETAILS Roller diameter: 65 mm Ihodpoyg Haijfx Abrou Roller pitch: 125 mm Max. workpiece weight: 50 kg Feed rate: stepless from 10 to 50 m/min MACHINE DETAILS Total connected load: 2 kW Compressed air consumption: 27 NL/min Operating pressure: 6 bar Bargstedt TDK 10/25/10 (Turning Station, crosswise to longitudinal, Machine No. 0-282-07-7585) TECHNICAL DETAILS Roller diameter: 65 mm Roller pitch: 125 mm Max. workpiece weight: 50 kg Feed rate: stepless from 10 to 50 m/min MACHINE DETAILS Total connected load: 2 kW Compressed air consumption: 1 NL/min Bargstedt TSH20/ER/25/08/S (Single-Sided Stacking Station, Machine No. 0-281-07-7589) - 1 height-adjustable single sheet transport - 1 vacuum suction carriage (minimum workpiece dimensions: 280 x 230 mm) - 1 central thickness adjustment for the suction carriage, adjustable to board thickness for board transfer - 1 lift table with powered stacking roller conveyor - 1 powered stacking roller conveyor, located behind the stacking station - Suction beam (2-lane operation, max. 4 parts in sequence) TECHNICAL DETAILS Stack height: 1200 mm Stack changeover time: 35 sec Max. basic output: 17 cycles/min Max. workpiece weight: 50 kg Max. workpiece length: 2,500 mm MACHINE DETAILS Control system: Klöckner-Möller and Siemens PLC Total connected load: 14 kW Compressed air consumption: 81 NL/min Operating pressure: 6 bar

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2014, operating hours: 8,416 h, laser power: 3,200 W, sheet thickness steel (max.): 10 mm, sheet thickness aluminum (max.): 4 mm, pipe diameter (max.): 152 mm, working length: 6,500 mm, TRUMPF Tube Laser Cutting System with LoadMaster Tube 6.5 m and extensive additional equipment! TECHNICAL DETAILS Maximum tube diameter: 152 mm Maximum working length: 6,500 mm Material thickness (steel): 10 mm Material thickness (stainless steel): 5 mm Material thickness (aluminum): 4 mm Laser power: 3,200 W MACHINE DETAILS Control system: SIEMENS Sinumerik 840D SL Operating hours: 24,428 / 8,416 h EQUIPMENT - LoadMaster Tube 6.5 m with bundle magazine - Robust machine frame with integrated laser unit - Feed station with self-centering clamping jaws - Raw material tube support with automatically retractable pipe rests - Through-feed chuck with self-centering parallel clamping rollers - High-precision drives - Discharge station for finished workpieces up to 3 m in length - Tube support for finished parts with extendable guide rollers - Scrap conveyor with collection bin - Enclosed beam guide - NitroLine Ihedpfxoygu Tks Abrsu - FocusLine - Laser power control - Programmable cutting gas pressure - Automatic power on/off - Ergonomic control panel with touch color screen - Work area illumination - High-frequency excitation - Maintenance-free turbo radial blower - TASC 3 laser control - Laser logbook function - Cooling unit - Single cutting head strategy - Lens cutting head, 155 mm focal length - ControlLine - Simple operation - Online support - Diagnostic functions - Integrated technology data - Remote service via internet - RJ45 network interface and USB port - CE marking - Multi-beam light barriers - Monitoring system for gas pressure, temperature, and cooling water, among others - Compact dust extraction system - Protective enclosure with polycarbonate (Makrolon) panels - Jaw sets with clamping range 20–85 mm and 85–152 mm - Quick-change forming shells for round tubes up to 152 mm - Quick-change forming shells for rectangular tubes (up to a circumscribed circle of 85 mm) - Quick-change forming shells for rectangular tubes (up to a circumscribed circle of 170 mm) - Guide rollers for round and rectangular tubes - SeamLine Tube with inner seam detection - Adaptive clamping technology – feed station, small circumscribed circle - Adaptive clamping technology – feed station, large circumscribed circle - Adaptive clamping technology – through-feed chuck, small circumscribed circle - Adaptive clamping technology – through-feed chuck, large circumscribed circle Note: The machine will be dismantled on 02/03/2026 and can be inspected under power until then.

Year of construction: 2021, condition: new, Aluminum angled conveyor belt including mobile substructure horizontal area 1500mm (adjustable) Rising range 2500mm (customizable) Freely selectable angle in the bend: 30, 35, 40 or 45 ° Polyamide swivel castors with locking brakes Conveyor belt width 400mm (adjustable) We deliver our conveyor belts in PVC, PU or rubber. Iedpfx Abjhh A Uqorehu PVC conveyor belt including carrier and corrugated edge Drive: Motor 0.25KW (adjustable), speed 0.3m / sec Connection 220 / 240V, 50Hz, protection class IP54 Drive etc. ready for connection, motor control optional 6x adjustable machine feet for alignment Wave edge: 40x35mm (customizable) T-20 studs - 400mm pitch (customizable) 2-ply particularly cross-stable Our core competence lies in delivering exactly what the customer really needs. We work together with our customers to develop customer-specific, individual solutions and deliver corresponding systems from our own production. Feel free to contact us by phone to find a suitable solution for your application. Conveyor belt, conveyor belt system, discharge belts, belt conveyor, magnetic separator, overbelt magnetic separator, recycling, wood chips, plastic, metal-free metal detection, neodymium, overbelt magnet, magnetic belt separator

Year of construction: 2001, operating hours: 100,290 h, condition: ready for operation (used), functionality: fully functional, controller model: Simcon/32-NET Version 00.1902, inner dimension height: 750 mm, inner dimension length: 615 mm, inner dimension width: 580 mm, usable tank capacity: 270 l, machine/vehicle number: 58226018400020, TECHNICAL DETAILS Temperature range: -70 °C to 180 °C Test chamber volume: 270 L Temperature change rate cooling: 10 K/min Temperature change rate heating: 10.0 K/min Temperature deviation over time: 0.1 to 0.5 K Temperature spatial uniformity: 0.5 to 2.0 K Test chamber dimensions (W x D x H): 580 x 615 x 750 mm MACHINE DETAILS Overall dimensions (D x W x H): 2,080 x 895 x 1,950 mm Voltage: 3/N/PE AC 400 V ±10% 50 Hz Nominal power: 14 kW Ihodpfx Aboyfud Torou Nominal current: 26 A Refrigerant: R-404A / R-23 Control system: Simcon/32-NET Version 00.1902 EQUIPMENT Door with window Interior lighting Water cooling Feedthroughs left: 2x NW 50 mm Feedthroughs right: 3x NW 125 mm Compressed air dryer type: ZANDER

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, overall weight: 37 kg, load capacity: 10 kg, arm reach: 901 mm, positioning accuracy: 0.03 mm, Auction of a set of 7 KUKA KR 10 R900-2 robots! Ihjdpfx Aboyft U Dsreu TECHNICAL SPECIFICATIONS Payload: 10 kg Arm reach: 901 mm Repeatability: 0.03 mm MACHINE DETAILS Controller: KRC4 compact Net weight: 37 kg Areas of application: Handling, assembly, packaging, machine tending, small-lot production Protection class: IP65 SCOPE OF DELIVERY (per robot) KUKA industrial robot KR 10 R900-2 KUKA control unit KRC4 compact KUKA SmartPad (operator panel) Set of connection cables

Condition: excellent (used), TECNI-ARMENTIA CH-70 edger - hydraulic control - the possibility of programming the width - saving up to 12 programs - centering table TECHNICAL PARAMETERS: Ijdpeidmptjfx Abrshu cutting width max. 700 mm cutting height max. 130 mm main engine power 55 kW material width max. 830 mm length of the fixed sleeve 300 mm length of the movable sleeve 100 mm min. material length 700 mm spindle diameter 65 mm sleeve diameter 85 mm disc diameter 350 - 400 mm hydraulically smoothly adjustable feed feed speed up to 38 m / min feeding table 2700 mm roll width 700 mm roll diameter 140 mm centering feeding table two lasers pump motor power 4 kW row of anti-recoil pawls three upper pulling rollers three lower pull rollers hydraulic pressure hydraulic height adjustment dimensions (length / width / height) 480/200/230 cm weight 4000 kg

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 06-00376, measuring range X-axis: 400 mm, measuring range Y-axis: 400 mm, measuring range Z-axis: 150 mm, control type: CNC control, TECHNICAL DETAILS Measuring range X-axis: 400 mm Measuring range Y-axis: 400 mm Measuring range Z-axis: 150 mm Measurement accuracy: Length measurement deviation up to approx. 1.5 µm MACHINE DETAILS Control: CNC Ihsdpfx Aeyft Tmebrju Software: WinWerth, version 8.40 or higher Tool holder / probe: Renishaw, MK 2 Probe system: Renishaw Probe Interface PI 200 Voltage: 230 V AC Frequency: 50 Hz Current consumption: max. 10 A EQUIPMENT Granite machine with measuring glass and cover CNC control with scope controller Renishaw probe (various probe inserts included) PC workstation User manuals (WinWerth) Calibration and test reports Folder with machine and measurement room documentation Software and calibration data carriers (CD/DVD) Control cabinet integrated, main switch available

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 46876, Year of construction: 2019, operating hours: 15,564 h, load capacity: 2,500 kg, lifting height: 5,570 mm, free lift: 1,580 mm, fork length: 1,060 mm, fork width: 1,360 mm, TECHNICAL DETAILS Lifting capacity: 2,500 kg Lift height: 5,570 mm Free lift: 1,580 mm Overall height: 2,450 mm Fork length: 1,060 mm Fork width: 1,360 mm Minimum fork width: 290 mm MACHINE DETAILS Power type: electric Mast type: Triplex Iodeyh Nhpjpfx Abrohu Dimensions & Weight Dimensions (L x W x H): 1,530 x 1,500 x 2,460 mm Unladen weight: 6,500 kg Battery year: 2025 Battery capacity: 930 Ah Operating hours: 15,564 h EQUIPMENT Side shift Fork adjustment New battery Half cabin Work lights Free lift

Condition: excellent (used), Year of construction: 2022, operating hours: 1,530 h, functionality: fully functional, power: 129 kW (175.39 HP), For sale: Arjes Impaktor 250 EVO Year of manufacture: 10/2022 Operating hours: 1530 Equipped with paddle shaft for wood, plastic, commercial waste, etc. A concrete shaft is also included. The machine is fully operational and can be inspected during operation. Ihjdpfx Absw Nyt Isrsu

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 517314V00020, Year of construction: 2019, operating hours: 17,191 h, load capacity: 1,600 kg, lifting height: 5,220 mm, free lift: 1,700 mm, fuel type: gas, fork length: 1,150 mm, TECHNICAL DETAILS Lifting capacity: 1,600 kg Lifting height: 5,220 mm Ihjdpeyh Ngrjfx Abreu Free lift: 1,700 mm Fork dimensions: 1,150 mm x 910 mm Minimum fork width: 200 mm MACHINE DETAILS Number of wheels: 4 Engine manufacturer: Still VW Drive type: LPG Dimensions & Weight Dimensions (L x W x H): 2,975 mm x 1,099 mm x 2,260 mm Transport weight: 2,706 kg Operating hours: 17,191 h EQUIPMENT 4th valve for fork carriage Side shift Work lights Heater Non-marking tyres Full cabin

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1994, operating hours: 21,294 h, working width: 3,050 mm, cutting angle (max.): 3 °, stroke rate (min.): 22 1/min, sheet thickness (max.): 10 mm, working height: 900 mm, TECHNICAL DETAILS Sheet width: 3,050 mm Sheet thickness: 10 mm Cutting angle: 0.5-3° Number of hold-down clamps: 18 pcs Stroke rate: 22/7 strokes/min Working height: 900 mm MACHINE DETAILS Total power requirement: 20 kW Dimensions & Weight Space requirement: approx. 3,800 x 2,100 x 2,100 mm Machine weight: approx. 8,500 kg Iodpfoyhmhpsx Abrjhu Operating hours: 21,294 h

Condition: reconditioned (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: HBC 140 2x75kW 2001 (210-008-01), pressing force: 155 t, bale weight: 1,500 kg, pressure: 250 bar, power: 150 kW (203.94 HP), year of last overhaul: 2024, Equipment: documentation/manual, Sold by Bollegraaf Recycling Solutions, the original manufacturer of this Bollegraaf baler and conveyor: Bollegraaf HBC140s Baler (2x75kW). Baler: Weight: 47.100 kg Ihodpetvau Ajfx Abrou Construction year: 2008 Hardox bottom floor plate only Variable channel pressure control Plastic valve Hydraulic pump driven by frequency inverter Anti-rat cabling Oil in-depth filtration Modem Hours 40.000 This baler can also be sold fully refurbished according to the 'Bollegraaf OEM Certified Refurbishment standards'. This includes 2 year guarrantee. Contact us for more information or a quotation. General principles of refurbishment Cleaning & disassembly Before the actual refurbishment takes place the baler is completely cleaned and disassembled in our refurbishment workshop. Tolerances After the disassembly the tolerances of all steel components are measured and re-welded where necessary, this at least applies to the following components; • Ram, • Frame, • Channel, • Pre-press-flap After disassembly and inspection the ram is welded-up again and fitted with new ram wheels. The protective grids and the pre-press flap are made dent-free and repaired where necessary. Repainted After measuring the tolerances and any repair- and welding work, all components are being blasted and coated again. Hydraulics: The hydraulic tank is cleaned. The hydraulic lines & hoses are replaced. The hydraulic components are repackaged. The hydraulic oil is replaced. Cabling: All cabling is checked and replaced if necessary. All junction boxes are replaced and placed back in easily accessible positions. Wear parts: All wearing parts are replaced. The pins and shafts of the cylinders and the channel are replaced with new ones. All wearing parts of (both) needle installations and knotters are replaced for new. Cylinders: The cylinders are repackaged and, if necessary, provided with a new chrome layer or a new cylinder rod. MCC Cabinet The switch box is checked and cleaned. If necessary, electronic components are replaced with new ones. The PLC and HMI (human interface) are replaced with the latest Schneider M340 version including the latest software.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2000, bending force (max.): 85 t, stroke length: 215 mm, throat depth: 410 mm, distance between stands: 1,750 mm, working length: 2,050 mm, TECHNICAL DETAILS Press force: 85 t Bending length: 2,050 mm Distance between uprights: 1,750 mm Stroke: 215 mm Throat depth: 410 mm MACHINE DETAILS Iedpsyhmdqefx Abrshu Control: DELEM Dimensions & Weight Machine dimensions: 2,700 x 2,100 x 2,400 mm Weight: 7,900 kg EQUIPMENT Two-hand operation 2 support arms Side safety doors Lasersafe Fissler Wila tool clamping Adjustable die position Crowning system Tool cabinet