Saw, dovetail notcher

MS 35-SF

Condition: reconditioned (used), Double-side Sizing-Milling & Edge Banding - First (1st) machine in a line Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Panels thickness (min/max) mm 8 / 45 Working width (min/max) mm 236 / 1300 Godpjdh Tfgofx Aftokf Numerical Control /Software ICOS Open Adjustable feeding speed (m/min ) 10 / 50 Without Transmission bar (Master & Slave system) Safety and sound-proof enclosures/cabins SIZING PART (for each side): Spraying unit (Anti-sticking liquid) Milling Unit (vertical Joint Trimmers) 08. 0555 max. 3° (2 x 1 kW) Free space EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt Glue + Quick Melt system) 04.1570 Band Pressure zone Edge coils supporting unit (reels N°) 6 Rough Trimming unit 08. 0555 (2 x 1 kW) max. 3° Fine Trimming unit 08. 055 (2 x 0,66 kW) 30° + 30 m/min Glue scraping unit 08.517 Spraying Unit (for polishing liquid) Buffing unit 08.617-2 (2 x 0,18 kW) Free space

Condition: used, Automatic packaging machine, sealer SIAT / BRÜNINGHAUS type XL-35-94 / P Carton gluing machine, carton gluing machine, semi-automatic closing machine No. 19084 Year of construction 2004 Carton length 160 mm -any Carton height 120-510 mm Carton width 120-510 mm Mains connection 400 Volt, 50 Hz, 260 Watt - Manual adjustment of the side conveyor belts for the carton width, via hand crank - Carton feed via conveyor belts on the right and left Gsdpfxjt Exq Nj Aftokf - Manual height adjustment of the upper gluing station, via hand crank - Glues the bottom and top of the carton with 2 separate parcel tape stations - 2 gluing units for processing self-adhesive tape, width 75 mm, presumably type K12 - Gluing stations for self-adhesive tape (also for large rolls Ø 300 mm) - Height-adjustable feet to adjust the working height Space requirement L x W x H 1150 x 1100 x 1350 mm Weight 185 kg good condition

Year of construction: 2016, condition: excellent (used), Böhl - wrapping machine type JUNIOR/S-450 VA Product dimensions: Length: 600/800mm maximum 5800mm Width: 15mm maximum 220mm Height : 15 mm maximum 120 mm Maximum weight 30 kg/metre The maximum cross-section diagonal of the previous customer was 220 mm. The specified weights are only possible with a driven on-site roller conveyor. Technical specifications: Electrical control: Siemens S7 with TP Control voltage: 24V DC Operating voltage: 3 x 400 V/50 Hz, N, PE Pneumatics: FESTO Compressed air: 6 bar dried, cleaned and oil-free Gkodpfelcc U Eex Aftsf Air consumption: about 20 NL cycle Maximum feed pressure: 8 bar Noise emission value: less than 80 db/A Machine compare layout Operating side: on the right in the conveying direction Control cabinet: on the left fixed to the machine Varnish machine 7032, gray black-yellow Runway height: 900mm

Condition: new, Vacomats are mobile dust extractors that extract large quantities of dust and chips in the smallest of spaces. in the smallest of spaces. These clean air extraction systems (vacuum) for indoor installation can be installed indoors as single or multi-machine machines for air volumes of up to 10,000 m³/h can be used. Manufactured according to the new EU standard EN 16770, they are particularly suitable for wood processing operations in which special safety requirements Godsu T Dv Ejpfx Aftjkf due to the risk of dust explosion. Materials of dust explosion class St1 are suitable. The Vacomaten XPe filters are cleaned purely electro/mechanical via an efficient vibration motor, which - as soon as all machines are switched off - starts starts automatically. It is controlled via the the woodworking machine by means of potential-free contacts. The control of the motorized jogging is included in the scope of delivery. Supplied without coils Motorized filter regeneration, mobile, Suction side on right or left, can be reassembled, Height reduction possible for transportation ----- Technical data ----- Extraction nozzle Ø: 200 mm, Volume flow: 2,495 m³/h, Nominal volume flow: 2,262 m³/h, max. negative pressure: 2,000 Pa, Filter area: 14.5 m², Residual dust content: < 0.1 mg/m², Number of bags: 3 pieces, Motor: 4.0 kW, Dimensions (LxWxH): 2,645 x 900 x 2,130 mm, Weight: 500 kg, Sound pressure level: 73 dB(A), Dust class: M incl.: an attached control cabinet

Condition: excellent (used), Hoffmann MS35-SF/S07.117 Double Mitre Saw Gkodpfx Afsw T R T Totef 45° angled cuts Saw motors: 4×2.2 kW Saw blade speed: 3,000 rpm Blade size: 350 mm, bore 30 mm Max working width: 80 mm Max working height: 80 mm Dovetail milling units: 2×0.5 kW Milling speed: 19,000 rpm Possibility to set two milling positions Working pressure: 6 bar CE certificate DTR documentation Weight approx. 800 kg Total machine dimensions with tables: 658×92×170 cm (H)

Condition: used, Corner transfer, roller conveyor, roller conveyor, driven roller conveyor, roller conveyor, roller conveyor with puller conveyor, transfer station Gkedpfx Aferv Av Iotjf -Transfer station: 1x roller conveyor with conveyor belt, 1x conveyor belt -Base: solid base frame, height adjustable -Speed: roller conveyor 20 m/min / conveyor belt 23 m/min -Roller track: conveyor track rollers. Ø63 x 2500 mm, conveyor belt 17 x 2815 mm -Conveyor track: 6 belts 17 x 2830 mm -Drive/gearbox: North, see photos of nameplates -Transport dimensions: 2810/1660/H870 mm / 2900/920/H870 mm -Weight: 569 kg / 258 kg

Condition: used, conveyor belt horizontal, 13.500 x 800mm broad, 13,5 m length, price: 4.900 €, contact: Herr Rainer Eckerle Gkjdpfx Afj R U U Ajtof

Year of construction: 2009, condition: used, Roller conveyor, roller conveyor, powered roller conveyor, roller conveyor -rotatable with turntable via servo motor -stable execution -electrically driven -Drive motor: 0.37 kW 76 rpm -Roll width: 1450 mm -Conveying length: 1400 mm -Diameter roller: 105 mm -Rollers: rubberized -Diameter shaft: 25 mm -Delivery height: 950 mm adjustable Godpfx Afob A S Ugotokf -driven: via belt -Dimensions: 1400/1650/H960 mm -Weight: approx. 300 kg

Condition: excellent (used), ZIM Hülsta carcase erector The carcase erector is used to erect and transport assembled carcases. Carcase erectors are mostly used for carcase presses with a throughfeed system. It facilitates handling when erecting large workpieces. Transport and assembly device within a carcase assembly line. Behind a throughfeed carcase press, the pressed carcases are placed on the back using this device. Assembly work can thus be carried out on the underside. Make: ZIM Hülsta-Werke Type: Carcase erector Gkjdpfxjvdb Ixe Aftjf Dimensions: Further items - new and used - can be found in our store! International shipping costs on request!