Used sheet metal working for sale (5,537)

Condition: used, Year of construction: 2001, functionality: fully functional, operating hours: 80,188 h, power: 3,200 kW (4,350.78 HP), pressing force: 22 t, Equipment: safety light barrier, Description X working area max.: 2585 mm Y working area max.: 1280 mm Control unit: Siemens Sinumerik 840 D Laser power: 2700 watts Operating hours: Laser beam on: 13,817 hrs Laser on: 71,637 hrs Operating hours: 80,188 hrs Standard equipment: - Rigid C-frame - Coordinate guide with integrated linear magazine - Drives: Maintenance-free three-phase servo motors - Programmable hold-down device for repositioning - Sensor-monitored part chute 500x500 mm for punching and laser stations, ejector cylinder on laser chute - Laser unit: High-frequency excited CO2 laser TLF 3200W, vibration-isolated, integrated into machine frame, incl. cooling unit and laser control system Nwsdpfx Ajy Dpnfjkcof - Programmable cutting gas pressure adjustment - Laser cutting head: 5'' lens, quick-change system, distance control Safety: Multi-beam light barriers, fast-acting hydraulic shutoff, extraction system and compact dust extractor, protective device against stray radiation at the cutting head + Laser TLF 3200 + Brush table + Marking / fast ribbing function + Softpunch + Blowing device for small parts + Repositioning cylinder + Bulge detection + Chip conveyor

Condition: new, bending diam. - max. 36.0 mm ST cutting thickness max. 36.0 mm ST motor 1450 U/min oil volume 32.0 l motor 380 Volt 50 Hz total power requirement 5.5 kW weight 650 kg range L-W-H 1470 x 1200 x 1020 mm Exhibition machine - NEW (!!) Equipment: - Maximum performance, minimum consumption - hydraulic combination machine for bending and cutting processes * for e.g. structural steel or solid material - Bending mode with 3x different angle settings - manual and automatic mode selectable - simultaneous bending and cutting processes when the machine is in operation - "ECO mode" = hydraulic pump only runs when the foot switch is pressed - freely movable foot switch Nwsdpfx Ajxabntjkcof - operating instructions technical data: - steel 45 kg / mm² .. bending Ø 36.0 mm / cutting Ø 36.0 mm * for 2x pieces - steel 45 kg / mm² .. bending Ø 20.0 mm / cutting Ø 24.0 mm - steel 65 kg / mm² .. bending Ø 32.0 mm / cutting Ø 32.0 mm * for 2 pieces - steel 65 kg / mm² .. bending Ø 18.0 mm / cutting Ø 20.0 mm - steel 85 kg / mm² .. bending Ø 26.0 mm / cutting Ø 28.0 mm * for 2 pieces - steel 85 kg / mm² .. bending Ø 14.0 mm / cutting Ø 18.0 mm * Machine video: ?v=zagTSA81VyA

Condition: ready for operation (used), Year of construction: 2001, sheet width 3200 mm plate thickness 3.0 mm ST thickness at "Niro-steel" 2.0 mm Opening width / upper beam 300 mm speed OW 40.0 mm/sec Bending beam adjustment 80.0 mm work height max. 900 mm speed BW 90.0 Grad/sec control MULTIBEND 5000 back stop - adjustable 10 - 1550 mm accuracy +/- 0.1 mm air pressure 5.0 bar Number of working hours ca. 1.000 h voltage 400 V total power requirement 2x 4.0 kW weight 4400 kg range L-W-H 4295 x 2225 x 1775 mm New price approx. 85.000 euros Machine with only approx. 1.000 operating hours (!!) good condition (!!) Special price on request - in checked condition - machine video - ?v=VP6emx4HTYM ! Maximum flexibility when bending cassettes, boxes and profiles ! High flexibility in bending part design ! High productivity and throughput ! Easy to use Equipment: - motorized universal swivel bending machine "RAS 73.30" * high-precision mechanics with modern control technology * for individual and series production * robust high-speed machine with high axis speeds * torsion-free welded construction - RAS CNC control model "MULTIBEND 5000" * material and tool library * swiveling - front right * 1x emergency stop button - CNC electro-motorized upper beam adjustment * fast closing and opening speed * programmable opening and closing height * bending radii without special tools (multiple bends) * rigid upper beam for straight bending parts * 1x set of RAS split upper tools .. height 80 mm * RAS "click-in" tool system - CNC electro-motorized bending beam adjustment * fast swivel movement: short production time * crowning system compensates for deformation by the bending forces * 1x set of RAS split bending tools - CNC electro-motoric back stop * fast positioning, repeatable work * table plates hold the weight of the sheet * stainless steel table plates with ball rollers - 2x freely movable double foot switch Nwsdoxabz Topfx Akcof - 1x RAS tool trolley for bending tools (movable) - operating instructions (PDF) + original circuit diagram

Condition: ready for operation (used), Year of construction: 2008, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,525 mm, overall weight: 21,000 kg, table load: 160 kg, number of axes: 2, This AMADA EMZ 3610 NT was manufactured in 2008. It features a press force of 300 kN, can handle material up to 4.5 mm thick, and supports a maximum table load of 160 kg. The machine includes 45 turret stations with auto-index and achieves a stroke rate of 1000 strokes/min. If you are looking to get high-quality punching capabilities consider the AMADA EMZ 3610 NT machine we have for sale. Contact us for more information. • Press force: 300 kN • Travel distance with repositioning (X/Y): 5000 mm / 1525 mm • Max. material thickness: 4.5 mm • Travel speed (X/Y): 100 m/min / 80 m/min • Axis speed: 128 m/min • Positioning accuracy: ±0.1 mm • Turret stations: 45 • Auto-index stations: 2x B / 2x C • Overhauled two years ago, and serviced by Amada every year • Turret speed: 30 rpm • Stroke rate: 1000 strokes/min Nedex Enlxspfx Akcewf

Condition: new, pressure 28 t Nwsdpfx Akoqzmgqjcjf piston stroke 180 mm diameter of piston 130 mm table-size 300 x 550 mm working feed 2 - 9,8 mm/sek return speed 20 mm/sec Max. pressure 200 bar bending capacity - flat iron 200 x 10 mm weight of the machine ca. 800 kg dimensions ca. 1150 x 1103 x 750 mm The horizontal hydraulic press (28 ton) can be used for many different metal working jobs. The press has a piston stroke of 192 mm and can be equipped with all kinds of tooling for specific bending or straightening jobs. We supply a standard toolingset with this press including a stampholder and backgauge. However, we also produce custom-made tooling for your specific request. Thanks to the NC-control you can easily set the cylinder stroke and save up to 100 working cycles. With this horizontal hydraulic press you are able to bend, straighten, notch, cut and form. A universal hydraulic press that serves all your needs in cold metal working processes.

Condition: repair required (used), functionality: not functional, Year of construction: 1977, control type: manual, degree of automation: manual, actuation type: hydraulic, number of rollers: 3, roller (top) diameter: 435 mm, side roll diameter: 435 mm, roller diameter: 435 mm, roller length: 2,550 mm, working width: 2,500 mm, sheet thickness (max.): 40 mm, sheet thickness steel (max.): 40 mm, overall weight: 35,000 kg, total length: 8,000 mm, total width: 2,500 mm, total height: 2,720 mm, power: 40 kW (54.38 HP), input voltage: 380 V, Equipment: centralized greasing system, emergency stop, swiveling upper roller, 3roll plate bending machine 2500x40 mm Sertom -Italy Rollers length 2550 mm -Top roll 435 mm -Side rolls 435 mm Capacity rolling -plate width 2500 mm -plate thickness 40 mm Nwedpfx Akoxqq Iqjcof -pre-bend 35 mm We sell as is Machine need hydraulic repair DIMENSION 8000X2500XH2720 MM WEIGHT 35 ton POWER INSTALLED 50 Hp

Condition: used, Year of construction: 1992, sheet width 2050 mm plate thickness 10.0 mm ST pre-bending 8.0 mm ST diameter of upper rolls ~ 205 mm side roll diameter ~ 195 mm Control konv. oil volume 80.0 Liter voltage 380 V total power requirement 5.5 kW weight 3200 kg range L-W-H 4500 x 1500 x 1300 mm Features: - Robust electro-hydraulic 3-roll bending machine - 3-roll concept offers a wide range of bending and rounding options - Pivoting control unit at the front * Operation - Control of all rolls and machine axes * Digital position display * Manual operation via joysticks - Diameters of up to 1.1 times the top roll diameter are possible - Forged and hardened rolls with a hardness of 53-55 HRC Nodpexacdvjfx Akcjwf - Low-maintenance, stable machine design - Sturdy welded steel construction - Electro-hydraulic folding bearing for easy pipe removal - Pressure gauge / pressure indicator for the rolls - Safety device (safety lanyard with switch unit) - Operating instructions (PDF)

Condition: new, Year of construction: 2026, machine/vehicle number: H3-130_1, functionality: fully functional, power: 11 kW (14.96 HP), pressing force: 130 t, stroke length: 250 mm, operating speed: 210 mm/s, reverse speed: 130 mm/s, table width: 3,100 mm, throat depth: 250 mm, clearance between the columns: 2,600 mm, oil tank capacity: 180 l, total length: 4,690 mm, total width: 2,340 mm, total height: 2,980 mm, overall weight: 8 kg, Equipment: CE marking, documentation/manual, safety light barrier, Hydraulic Press Brake Cone H3-130 - DA-66S CoastOne - Finland Technical Data Cone H3-130: Bending force: 130 tons Bending length: 3,100 mm Distance between columns: 2,600 mm Stroke: 250 mm Clear width: 450 mm Throat depth: 400 mm Table height: 940 mm Length: 4,690 mm Width: 2,340 mm Height: 2,980 mm Approach speed: 210 mm/s Return speed: 130 mm/s Bending speed: 10 mm/s Oil tank: 180 l Weight: 7.75 tons Main motor: 11 kW Standard Equipment: - CNC controlled X-, R-, Z1- and Z2-axes - 2 rear stop fingers - Delem DA-66S graphical controller - CNC-controlled crowning device Type 1 - AMADA Promecam tool holders - LazerSafe LZ2 front safety laser + PLC + rear light curtain - Standard punch and 4V die - Integrated LED lighting on the ram as front illumination Delem DA-66S Graphical Controller: - 24-inch high-resolution touchscreen Nwedpjy Dtalefx Akcjf - Graphical 2D programming interface - 3D machine visualization for simulation and production - Supports 3 to 8 axis control - Includes Profile-T Lite – T2D offline programming software - USB and peripheral interfaces - User-specific application support in the control’s multitasking environment - Interface for bend sensor and automatic angle correction

Condition: used, functionality: fully functional, Section steel shear and punch type 210/11, 80x8, beam 10 mm, solid material 30 mm, T-section 80x8 Nwsdpfx Ajy Dh Eiskcjf

Condition: used, functionality: fully functional, Year of construction: 2010, machine/vehicle number: 081-2010, actuation type: hydraulic, controller manufacturer: Swiss Bend-IT technology V,3,4,0, number of rollers: 4, roller (bottom) diameter: 1,450 mm, roller (top) diameter: 1,500 mm, side roll diameter: 1,100 mm, overall weight: 750,000 kg, total length: 15,000 mm, total width: 7,200 mm, total height: 7,890 mm, Haeusler VRM-HY3600-4712 Four Roll Plate Bending Machine (2010) Cold capacities Prebending/rolling steel with yield strength 620N/mm2 - 3,600mm plate width - 4,000mm diameter - 200mm to 270mm plate thickness 4 rolls Drop end bearing rolls 1,500mm diameter top centre roll 1,450mm diameter bottom centre roll 1,100mm diameter side rolls 7,300 tonnes maximum top roll pressure 60CrMoV12.5 roll material Centre top and bottom driven rolls Hydraulic drive 1.2, 2.4, 3.6m/min rolling speeds Automatic top and bottom roll speed compensation Hydraulic roll adjustment Continuous roller tilt for cone rolling Automatic centralised lubrication Inertia braking for rolls rotation Overload protection for the machine Electrical overload protection against opening the drop end when bottom roller pressure is low Nsdsyzr R Rspfx Akcowf Electrical protection against moving the bottom roller when the dropend is open Preselection of the rolling pressure on the bottom roller from the Control panel Swiss Bend-IT technology V,3,4,0 controls Windows XP embedded OS Beckhoff software Mobile/central control panel 750 tonne 15m long x 7.2m wide x 7.89m high 400V, 3 phase, 50Hz 24V control voltage 862kVA total power 35m3/hour compressed air at 4bar

Condition: good (used), Table shear cutting blade, replacement blades for table shears, replacement cutting edges, cutting blades, shear blades -Cutting blade: Replacement blade for guillotine shears -Cutting length: 870 mm -Hole spacing: 250 mm / Ø23 mm see photos -Quantity: 12x replacement blades available -Price: per piece -Dimensions: 870/23/H90 mm -Weight: 13.5 kg/pc. Njdpfjy Akfcex Akcswf

Condition: good (used), Table shear cutting blade, replacement blades for table shears, replacement cutting edges, cutting blades, shear blades -Cutting blade: Replacement blade for guillotine shears Nwsdpfey Akchox Akcof -Cutting length: 1290 mm -Hole spacing: 240 mm / Ø13 mm see photos -Quantity: 8x replacement blades available -Price: per piece -Dimensions: 1290/15/H70 mm -Weight: 10.3 kg/pc.

Condition: good (used), Plate shears cutting blades, replacement blades for plate shears, replacement cutting edges, cutting blades, shear blades -Cutting blades: Replacement blades for Atlantic ATS 3006 guillotine shears, 2 pieces -Cutting length: 3120 mm -Hole spacing: 195 mm / M14 see photos -Dimensions: 49/19/3120 mm / 49/19.4/3120 mm -Price/Delivery: complete -Transport dimensions: 3200/120/H190 mm -Total weight: 57 kg Nwjdpoxf Dpkefx Akcef

Condition: good (used), Table shear cutting blade, replacement blades for table shears, replacement cutting edges, cutting blades, shear blades Nwjdpfxen Nbnqs Akcsf -Cutting blades: Replacement blades for guillotine shears, 2 pieces -Cutting length: 2550 mm -Hole spacing: 125/200 mm / Ø10 mm see photos -Price/Fee: complete -Total weight: 40 kg

Year of construction: 1999, condition: ready for operation (used), - USED - 6-AXIS SYNCHRONIZED CNC PRESS BRAKE WITH HYDRAULIC CROWNING AXIS: Y1 - Y2 - X - R - Z1 - Z2 BENDING LENGTH: 3100 mm TONNAGE: 165 ton THROAT DEPTH: 450 mm DISTANCE BETWEEN UPRIGHTS: 2600 mm OPEN HEIGHT: 440 mm Nwjdpfxjrk Sg Re Akcof UPPER BEAM TRAVEL: 250 mm APPROACH SPEED: 100 mm/sec RETURN SPEED: 120 mm/sec WORKING SPEED: 0-10 mm/sec MOTOR POWER: 18,5 kW CONTROL UNIT: DELEM DA 65 WEIGHT: 12020 Kg OVERALL DIMENSIONS: 4100 x 1880 x 2920 mm NOTE: No 2 FRONT SUPPORT BRACKETS; BOTTOM HYDRAULIC TOOL LOCKING

Year of construction: 2003, condition: ready for operation (used), - USED - 7-AXIS SYNCHRONIZED CNC PRESS BRAKE    AXIS: Y1 - Y2 - X - X1 - R - Z1 - Z2 BENDING LENGTH: 3150 mm TONNAGE: 70 ton THROAT DEPTH: 400 mm DISTANCE BETWEEN UPRIGHTS: 2640 mm OPEN HEIGHT: 450 mm APPROACH SPEED: 160 mm/sec RETURN SPEED: 160 mm/sec WORKING SPEED: 0-10 mm/sec Nedpfx Aork Shcekcjwf MOTOR POWER: 15 kW CONTROL UNIT: ESA KVARA WEIGHT: 7800 Kg OVERALL DIMENSIONS: 3400 x 2100 x 2650 mm

Year of construction: 2016, condition: ready for operation (used), - USED - 4-AXIS SYNCHRONIZED CNC PRESS BRAKE AXIS: Y1 - Y2 - X - R BENDING LENGTH: 2100 mm Nedpfxjxn U Rqj Akcowf TONNAGE: 60 ton THROAT DEPTH: 410 mm DISTANCE BETWEEN UPRIGHTS: 1700 mm UPPER BEAM TRAVEL: 275 mm CONTROL UNIT: DELEM DA58 WEIGHT: 4560 Kg OVERALL DIMENSIONS: 3250 x 1960 x 2750 mm

Year of construction: 2000, condition: ready for operation (used), - USED - 4-AXIS SYNCHRONIZED CNC PRESS BRAKE AXIS: Y1 - Y2 - X - R BENDING LENGTH: 3130 mm TONNAGE: 80 ton THROAT DEPTH: 405 mm Nwsdpfxjmyc I No Akcef DISTANCE BETWEEN UPRIGHTS: 2700 mm OPEN HEIGHT: 350 mm UPPER BEAM TRAVEL: 150 mm APPROACH SPEED: 100 mm/sec RETURN SPEED: 96 mm/sec WORKING SPEED: 9 mm/sec MOTOR POWER: 5,5 kW CONTROL UNIT: TASK 84 SIRIO 2 WEIGHT: 6500 Kg OVERALL DIMENSIONS: 4000 x 1700 x 2400 mm

Year of construction: 2010, condition: ready for operation (used), - USED - 6-AXIS SYNCHRONIZED CNC PRESS BRAKE WITH HYDRAULIC CROWNING AXIS: Y1 - Y2 - X - R - Z1 - Z2 BENDING LENGTH: 3200 mm TONNAGE: 100 ton THROAT DEPTH: 500 mm DISTANCE BETWEEN UPRIGHTS: 2550 mm OPEN HEIGHT: 600 mm UPPER BEAM TRAVEL: 400 mm X-AXIS TRAVEL: 800 mm R-AXIS TRAVEL: 150 mm APPROACH SPEED: 200 mm/sec RETURN SPEED: 180 mm/sec WORKING SPEED: 10 mm/sec Nedpfxstq Ngbo Akcjwf MOTOR POWER: 11 kW CONTROL UNIT: ESA 875 PLUS WEIGHT: 10500 Kg OVERALL DIMENSIONS: 4300 x 2000 x 3100 mm NOTE: MACHINE EQUIPPED WITH NEW CNC ESA

Condition: good (used), Ring bending machine, profile bending machine, bending machine, pipe bending tool, pipe bender, pipe bending machine, mandrel bending machine -Manufacturer: Dako Gedore, electro-hydraulic pipe bender on a mobile base -Pipe diameter: 3/8" to 3" -Stroke: 320 mm -Motor: AEG 1.5 kW Nodpfxox Nfhre Akcewf -Accessories: incl. bending jaws up to 2,5" (see photos) -Transport dimensions: 1140/1045/H1200 mm Total weight: 389 kg

Condition: good (used), Year of construction: 2000, Punching Press Manufacturer: EHT Type: Strippit 1500/30 Year of manufacture: 2000 CNC control: Fanuc Working area without repositioning: 2500 x 1500 mm Max. material thickness: 8 mm Punching force: 30 tons Turret with 46 tool stations, including 4 D-size index stations 3 programmable clamps Metal table Used exclusively in single-shift operation Including WILSON TOOL tooling 16426ä Njdpsul S Eaofx Akcjwf

Condition: used, Year of construction: 1992, Press Brake Manufacturer: Beyeler Model: Euro III 60x2050 Year of manufacture: 1992 Press force: 60 t Bending width: 2,050 mm Rated current: 16 A Machine weight: approx. 4,600 kg Equipment Comprehensive tool assortment Nwsdpoyni H Uofx Akcef Various upper and lower tools Operational and immediately ready for use Machine is fully functional ä16426

Condition: used, Year of construction: 1991, Press Brake Manufacturer: AMADA PROMECAM Model: HFB 125/40 Year of manufacture: 1991 Control: DELEM DA 58 Maximum press force: 1,250 kg Maximum stroke: 180 mm Sheet thickness: 8 mm Working width/pass-through: 3.7 m Number of phases: 3 Power consumption: 11 kW Voltage/Frequency: 380/50 Rated current: 24 A Weight: 9,900 kg Ref. No.: ä16426 Nwsdpfx Aox Tzl Ijkcof Availability: immediately

Condition: good (used), Year of construction: 2018, CNC press brake Manufacturer: SMD Yawei Model: PBB-630/6200 Year of manufacture: 2018 CNC control: CYBELEC ModEva 15 Pressing force: 6,300 kN Nedpfx Aerivu Sjkcswf Working width: approx. 6,200 mm DSP-Laser-TX Connected load: 400 V / 95 kVA 16426ä

Condition: good (used), functionality: fully functional, Year of construction: 2015, Four-Roller Plate Rolling Machine Manufacturer: FACCIN Model: 4HEL 2122 Year: 2015 Technical Specifications Brand: FACCIN Model: 4HEL 2122 Nwedpsy Atwbofx Akcef Year of manufacture: 2015 Working width: 2050 mm Roll geometry: Linear guides Top roll diameter: 225 mm Bottom roll diameter: 210 mm Side roll diameter: 165 mm Bending force against top roll: 100 t Motor power: 9 kW Dimensions (approx.): L 3.50 x W 1.20 x H 1.10 m Weight (approx.): 4,200 kg Performance Rolling capacity (full working width): 12 mm Pre-bending capacity (full working width): 8 mm From tube diameter: 1,125 mm With yield strength: 260 N/mm² Rolling capacity (full working width): 8 mm Pre-bending capacity (full working width): 6 mm From tube diameter: 295 mm With yield strength: 260 N/mm² Rolling capacity (full working width): 8 mm Pre-bending capacity (full working width): 6 mm From tube diameter: 1,125 mm With yield strength: 360 N/mm² Rolling capacity (full working width): 6.5 mm Pre-bending capacity (full working width): 5 mm From tube diameter: 295 mm With yield strength: 360 N/mm² Rolling capacity (half working width): 15 mm Pre-bending capacity (half working width): 10 mm From tube diameter: 1,125 mm With yield strength: 260 N/mm² Equipment - Double linear guide system for roller movement - Extra wide bearing blocks - MCS double bearing system for roll rotation - Extra heavy-duty, doubly supported drop end bearing - Electronic parallelism system (EPS) - Hardened rolls for maximum wear protection and reduced sheet damage - All rolls polished after heat treatment - SIEMENS S7 PLC touch control - Safety cable with emergency stop and CE certification - Water cooler for hydraulic unit All details without guarantee. A live demonstration under power is possible at any time in our showroom.