Used Dieselagregat/Strom Generator for sale (9,897)

Condition: used, The company Alutec Sp.zo.o. offers a double power generator for sale. In one container there are two generators driven by combustion engines. The power of the generators is 400 kVA and 480 kVA. Ljdoqrqigspfx Akqshf The generators can be operated as two independent generators or compressed in parallel with frequency synchronization. The generators are housed in a container in which 2 x 3500 l fuel tanks are also installed

Condition: excellent (used), Year of construction: 1992, operating hours: 383 h, functionality: fully functional, fuel type: diesel, tank capacity: 300 l, color: grey, power: 206 kW (280.08 HP), nominal power (apparent): 240 kVA, type of cooling: air, Generator set in container on trailer First registration: 10.06.1992 Registration: Trailer work machine generator set DA 43 Engine: Deutz type BF 12L 519 with 206 kW at 1500 rpm Generator: Bosch VEM with 240 kVA 400 V - 50 Hz 230 V Trailer manufacturer: Koegel Operating hours: 383 h Switch cabinets Built-in cable drums with cables Side door with removable step Soundproofed Stainless steel tank 300 liters Drawbar, foldable ABS From first owner with operating manual and service documentation Lodjxch N Aopfx Akqshf Net price: €14,700 plus 19% VAT. Inspection by prior appointment, at our branch: Am Depot 1 56357 Gemmerich

Year of construction: 2025, condition: new, functionality: fully functional, Complete - New MWM and CAT GAS generator set, CHP as option, Generator 10500V/50Hz. Ljdpfsv Uag Iox Akqehf

Year of construction: 2012, operating hours: 10 h, condition: like new (used), functionality: limited functionality, The generator was involved in the development of a vertical wind turbine and, due to the termination of the project, has very few operating hours. The control cabinets were assembled in Offenburg. Ledpeyl Nntsfx Akqjhf

Condition: used, mileage: 155,960 km, power: 115 kW (156.36 HP), first registration: 06/2009, fuel type: diesel, empty load weight: 7,500 kg, maximum load weight: 1,100 kg, overall weight: 8,600 kg, tire size: 215/75R17.5, axle configuration: 4x2, wheelbase: 3,320 mm, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: steel, number of seats: 2, Equipment: ABS, air conditioning, cabin, cruise control, fog lights, immobilizer system, low noise, onboard computer, power assisted steering, seat heater, spoiler, traction control, trailer coupling, Vehicle location: Bovenden, registration house, 1x comfort seat, seat heating, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, cruise control, Telligent automatic gearshift, ABS (anti-lock braking system), traction control system (ASR), roof spoiler, frame trim, fog lights, storage box, leaf suspension, tow bar ball head, low-noise G1, U-protection, roof hatch, green environmental badge Wheelbase: 3320 mm Body: Platform body with Deutz 6-cylinder engine & Leroy Somer power generator LSA 44.2M9 C 6/4 (approx. 11505 operating hours) 3.5 t front axle, rear axle H2 6.2/7.2 t crown wheel 325, ABS, disc brakes on front and rear axle, reinforced stabilizer bar on rear axle, front underride guard, distributor cockpit, Telligent automatic gearshift, pollen filter, reversing alarm. ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Lhjdpfxsvhl Ecs Akqjf - .

Condition: new, Year of construction: 2024, * Ashita Power AG3-30 Emergency Generator 30kVA * 30kVA * 400V * 50Hz Lodpfox U N I Hex Akqjhf * R.P.M.: 1500 * Model: ZH490D ---- Internal vehicle number: 11373 Errors and prior sale excepted.

Condition: new, Year of construction: 2025, * Ashita Power AG3-30 emergency generator 30kVA * 30kVA * 400V * 50Hz * 1,500 RPM * Model: YN27BNJ25 ----We have multiple units of this model in stock Internal vehicle number: 11287 Subject to errors and prior sale. Lsdpfx Aox Tykpskqjhf WhatsApp support available! If you have any questions about the vehicle or need further information, feel free to contact us conveniently via WhatsApp. Whatsapp Whatsapp

Condition: used, Year of construction: 2023, PSA Nitrogen Gas Generator NITRO Source N2 Parker N2-75 PALY VIG 1000 Liter Year of manufacture: 2023 Lhjdpjx U Tgmsfx Akqof The unit looks as good as new. The system was only in operation for a short period.

Condition: new, An additional aircompressor are required to enable the nitrogen generator to produce nitrogen. Nitrogen purity: 99.999% Lsdpoxfrv Ejfx Akqjhf Input pressure: 8Bar Output pressure: 7Bar Power: 75W(Power is the cost per hour to produce nitrogen ) 3 în 1 design, no need for extra air compressor and refrigerator or dryer Gas clean

Condition: used, mileage: 1,001 km, first registration: 01/2006, color: yellow, driver cabin: other, gearing type: other, Year of construction: 2006, Vehicle location: Bovenden, Body: Box body with storage compartments and power generator Power generator operation via auxiliary drive, dismantling of Daimler-Benz Atego 1325 AF 4x4 with wheelbase 3610mm! ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Ledpfxsi Rrpae Akqohf - .

Condition: used, mileage: 1,001 km, first registration: 01/2006, color: yellow, driver cabin: other, gearing type: other, Year of construction: 2006, Vehicle location: Bovenden, Body: Box body with storage compartments and power generator Power generator operation via auxiliary drive, dismantling of Daimler-Benz Atego 1325 AF 4x4 with wheelbase 3610mm! ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - . Lhjdoi Rrvkepfx Akqjf

Condition: used, Year of construction: 1990, MAN 125KVA diesel generator Lodpfx Akow U N Dasqehf

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: DK32037U640362L, overall weight: 975 kg, fuel type: diesel, tank capacity: 120 l, rotational speed (max.): 1,500 rpm, New ETT-50P generator from year 2026! TECHNICAL DETAILS Speed (max.): 1,500 rpm Power factor: 0.8 MACHINE DETAILS Lodpfx Aoy Emwyekqohf Output current: 72 A Output voltage: 400 V Output frequency: 50 Hz Type of output current: three-phase Continuous power (apparent): 50 kVA Emergency current: 72 A Voltage: 400/230 V Phases: 3 Fuel type: Diesel Tank capacity: 120 l Dimensions & Weight Dimensions (L x W x H): 2,200 x 1,060 x 1,373 mm Total weight: 975 kg EQUIPMENT CE marking Suitable with ATS switching system for mains takeover

Condition: good (used), Year of construction: 2000, gear diameter: 449 mm, Equipped with: Fanuc 150MB CNC Control Dry Cutting Cutter Shroud Chip Evacuation System Auto Doors Hydraulic System Lubrication System Work light Stack Light Specifications: Largest Speed Ratio: 10:01 Work Area (Continuous): Largest Depth of Teeth: 15.24 mm Largest Width of Tooth Face: 50.8 mm Work Area Axis: Horizontal Movement X Axis: -114 - 178 mm Vertical Movement Y Axis: -178 - 190 mm Movement of the Carriage Baseplate Z-Axis: -10.16 - 500 mm Workpiece Headstock Swiveling Range B-Axis: -3 - 90 Degree Maximum Distance Machine Center to Spindle Side: 165 mm Number of Teeth: 5-200 Inclusive Max. Gear Pitch Dia. of Typical 35 Deg. Spiral Angle Gear Using Max. Cutter Dia. 12" Cutter at the Following Ratios: Lodoruakgopfx Akqjhf Face Milling 1 x 1 - 13.5" - 342.9mm 2 x 1 - 16.0" - 406.4mm 5 x 1 - 17.7" - 450.0mm Face Hobbing (210mm Dia. Cutter) 1 x 1 - 10.560" - 268.22mm 2 x 1 - 10.286" - 275.00mm 5 x 1 - 11.810" - 300.00mm Milling Head Diameter: Helixact: 100,125,169,200,250,320mm Continuous Gumption Procedure, Teichloroethylene: 102 - 210 mm Workpiece Spindle: Drilling of Large Diameters: 5 3/64" Cone Upward Gradient on 304.8 mm (1 Foot): 21/32" Deep One of the Cone: 5.29" Diameter of the Whole Spindle Perforating: 3.35" Speeds: B-Axle Workpiece Headstock Drag Axis: 30 Degrees A-Axle Workpiece Spindle Number of Revolutions: 0 83 min-1 X-Axis Horizontal: 80 mm/sec Y-Axis Vertically: 80 mm/sec Z-Axis Carriage Baseplate: 80 mm/sec Space Requirement L x W x H (Approximate): 4.75 x 3.40 x 2.54m / 188" x 134" x 100" Machine Weight (Approximate): 10980 kg / 24,156#

Condition: used, Year of construction: 1996, functionality: fully functional, machine/vehicle number: 25734, Equipped with: Fanuc 150MB Control Hydraulic Chucking Work Spindle Large Bore Work Spindle #80 Taper Stock Divider Helical Motion Modified Roll Hansen Coolant Chiller & Filtration Coolant Tank & Pumps Chip Conveyor Chip Hopper Reven Mist Collector Hydraulic System Transformer Cutter Bolt Work Light Operator Platform Hand Tools Documentation Specifications: Extreme Ratio: Face Milling: 10:1, Face Hobbing: 10:1 Full Depth: Maximum: Face Milling:1.25" (31.75mm), Face Hobbing: 0.93" (23.50mm) Face Width: Maximum: Face Milling:6.00" (152.00mm),Face Hobbing: 3.00" (76.20mm) Range of Tooth Numbers: 1-300 Inclusive Gear Pitch Diameter, Maximum: 1000 mm (39.37") Cutter Size, Maximum: 18" (diameter) Face Milling Cutter Size, Maximum: 350 mm (radius) Face Hobbing Root Angle Range (B-Axis) 5 deg.to 90 deg., Face Hobbing:5 deg. to 90 deg. Machine Center to Work Spindle Face:9.00"Fixed, 229mm (Fixed) A-Work Spindle: 0 to 67 RPM, 0 to 333 RPM B-Swinging Base: 0 to 30 deg./sec, N/A C-Cutter: 0 to 500 deg., Same X-Horizontal: +/-305mm (+/-12") Y-Vertical: +/-305 mm (+/-12") Z-Sliding Base: -25/+700mm (-1/+28") B-Root Angle: -5 Degree/+90 Degree Diameter of Taper Hole at Large End: 8" (#80 Taper) to 6" (#60 Taper) Taper Per Foot:3/4", Same Depth of Taper Front:6", 152.40 mm Depth of Bore: 678 mm (26.7") Diameter of Taper Bore: 140 mm (5.5") Diameter Through Spindle of Hole:7.125", 180.98 mm MACHINE DIMENSIONS: Length x Width:233"x 209", 5920 mm x 5310 mm Height: 129", 3280 mm Ljdpsxaqa Sjfx Akqshf Weight: 65,000 lbs., 29,484 kg

Condition: used, Year of construction: 1977, machine/vehicle number: 19909, Equipped with: Index Plate Geneva Cam Lhjdoxdfazjpfx Akqef Cutter Body Hydraulic Work Clamping Coolant Pump & Tank Chip Conveyor Additional Cutter Bodies, Index Plates & Geneva Cams Available Specifications: Minimum Outside Cone Distance: 2.75" Maximum Cone Distance: 10" Maximum Gear Pitch Dia.: 20" Cutter Diameters Utilized: 9 - 18" Root Angle: 55 - 80 Deg. Face Width: 3" Number of Teeth: 20 -75 Diameter of Taper Hole at Large End: 3-27/64" Taper Per Foot: .50" Depth of Taper: .625" Cutter Speeds: 15.6 to 87.7 RPM Feeds (seconds/tooth): 5 to 34.3 Main Motor: 10hp, 1800 rpm Hydraulic Motor: 7.5hp, 1800 rpm Approximate Floor Space: 118" x 86.5" Needed Overall Height: 70" Approximate Net Weight: 18,820 lbs Shipping Weight Boxed for Export: 20,500 lbs

Condition: used, Year of construction: 1973, machine/vehicle number: 24109, Equipped with: Stock Divider Hydraulic Work Clamping Chip Conveyor Cutter Clamping Bolt Index Plate Change Gears Hydraulic System Coolant System Specifications: Min. Outside Cone Distance: 2.75" Max. Cone Distance: 10" Max. Gear Pitch Dia.: 20" Cutter Diameters Utilized: 9 - 18" Root Angle: 55 - 80 deg. Face Width: 3" Number of Teeth: 20 -75 Diameter of Taper Hole at Large End: 3-27/64" Taper Per Foot: .50" Depth of Taper: .625" Cutter Speeds: 6.8 to 16.5 RPM Feeds (seconds/tooth): 3 to 9 Main Motor: 5hp, 900 rpm Hydraulic Motor: 7.5hp, 1800 rpm Approx. Floor Space: 118" x 86.5" Needed Overall Height: 70" Approx. Net Weight: 16,000 lbs Ljdpfx Aksxdfa Ujqjhf Shipping Weight Boxed for Export: 17,000 lbs

Condition: good (used), gear diameter: 508 mm, total height: 1,780 mm, total length: 2,990 mm, total width: 2,200 mm, MODEL 610 GLEASON GEAR ROUGHER/FINISHER Equipped with: Hydraulic Workholding Pendant Control Chip Conveyor Index Plate Geneva Cam Change Gears Hydraulic System Coolant System Manuals Specifications: Lodsrtrykopfx Akqohf Maximum Gear Pitch Diameter: 20" Cutter Diameters: 9", 10.5", 12",14",16", 18" Whole Depth: 1.250" Root Angle: 60 to 80 deg. Face Width: 3.0" Extreme Ratio (Minimum): 2.25 to 1 Number of Teeth: 20 to 75 Diameter of Taper Hole at Large End: 3-27/64" Cutter Speeds (Per Minute) for Roughing: 15.6' to 87.7' Feeds (Seconds Per Tooth) for Roughing: 3 to 35 Cutter speeds (Per Minute) for Finishing: 6.8' to 20.5' Feeds (Seconds Per Tooth) for Finishing: 3 to 9 Floor Space: 118" x 86.5" x 70" H Weight: 17,500 lbs.

Condition: used, Used Oxymat O500 PSA industrial oxygen generator made in 2012 and with capacity 40.6 m3/hour. Containerised system that includes the following equipment: - Almig 45 belt air compressor, cyclone separators, air receiver, Donaldson DCO 360 AB dryer, Donaldson ultrafilter, Oxymat 2-column O500 system, oxygen receiver, Oxymat control panel, Rix compressor, low oxygen gas detection system. - Not suitable for medical oxygen. Lodpfxsyt Rc Ij Akqehf

Condition: good (used), Year of construction: 2014, operating hours: 246 h, functionality: limited functionality, overall weight: 3,000 kg, fuel type: diesel, color: green, power: 176 kW (239.29 HP), output current: 318 A, output voltage: 400 V, output frequency: 50 Hz, nominal power: 176 kW (239.29 HP), nominal power (apparent): 220 kVA, continuous power: 163 kW (221.62 HP), continuous power (apparent): 203 kVA, rotational speed (max.): 1,500 rpm, motor manufacturer: Volvo mPenta, type of cooling: water, Brand: Pramac Model: GSW220V Year of manufacture: 2014 Serial number: PEE2563417 Operating hours (read): 246 Capacity (kVA): 220 - 202.8 Capacity (kW): 176 - 162.2 Engine brand: Volvo Penta Engine model: TAD733GE Lhsdpey A Iuuofx Akqof Fuel: Diesel Alternator brand: Mecc Alte Alternator model: Eco38 2S Voltage: 400 Frequency (Hz): 50 RPM: 1500 Amperes (A): 317.6 Dimensions LxWxH (mm): 2650 x 1180 x 2450 Weight (kg) approx.: 3000 Units in stock: 1 Made in: Spain Comments: Ex-emergency set in good condition

Condition: used, cone distance min./max. 0-108 mm Pitch angle min/max 5°/84° Control GE Fanuc Series 0-GC Pitch diameter (1:1 ratio) 152 mm pitch diameter (10:1 ratio) 216 mm Diametral pitch (finest/coarsest) 1.3/8.5 Mod. Face width gear wheel max. 35 mm Knife spindle - Speed range 41-121 U/min working spindle speed range 0-33.33 U/min Lhjdpfoyh Rmmex Akqef weight 9025 kg dimensions of the machine ca. 2707 x 2720 x 2200 mmxmmxmm Equipment/accessories: -Knife -Chip conveyor -Technical documentation

Condition: good (used), functionality: fully functional, fuel type: diesel, power: 257 kW (349.42 HP), nominal power (apparent): 300 kVA, Generator set 300 kVA Generator: GARBE LAHMEYER Lhjdjt S Ny Ujpfx Akqjf Type: AT 315 LB 51 400 V Output: 300 kVA Engine: MWM-Diesel TBD 232V12 installed in container

Condition: used, Year of construction: 1992, SCANIA DS9 56 engine - variant A20T LEROY SOMER generator LSA 46M3S Ljdetphzdjpfx Akqjhf 140 kW / 175 kVA / 400 V / 1500 rpm

Condition: used, functionality: fully functional, Working area: approx. 800 x 4,000 mm multi-stage pre-screen bar grate Lsdow Dzwfopfx Akqshf drive 2 x 4 kW VIMARC with steel construction and feed hopper

Condition: used, Year of construction: 2023, operating hours: 8,973 h, machine/vehicle number: ESF372667, fuel type: diesel, power: 32 kW (43.51 HP), motor manufacturer: Kubota, Field of application: Construction Empty weight: 1.039 kg Generator capacity: 40 kVA Transport dimensions (LxWxH): 2.45x1.1x1.48 Please contact PFEIFER GROUP for more information Lhsdpfsyz Iyusx Akqsf