Used Gurutzpe M2-2000 for sale (8,727)

Condition: good (used), turning diameter over cross slide: 380 mm, spindle bore: 70 mm, turning diameter: 640 mm, turning diameter over bed slide: 900 mm, Characteristics: Length between points: 2.000mm Diameter admitted on bed: 640mm Diameter admitted on carriage: 380mm Diameter admitted on neckline: 900mm Shank pitch: 70mm Includes: 400mm 3-jaw chuck 390mm 4 independent jaw chuck Pgsdpfeudh Slsx Amisk Open steady rest and closed steady rest Quick-change toolholder with 4 tool holders.

Condition: excellent (used), turning diameter over cross slide: 1,100 mm, spindle bore: 102 mm, turning diameter: 1,600 mm, turning diameter over bed slide: 1,950 mm, center height in crank: 800 mm, Lathe Gurutzpe Super BT 800 x 2000 mm e.p,with dimension display,turning on bed 1580mm,on cross slide 1100mm,on the neckline 1950mm,length of the neckline in front of the chuck 620mm,shank hole 102mm,36 speeds 2,8-400rpm,motor 30cv,4-jaw independent chuck diameter 1400mm, bed width 800mm, tailstock shaft diameter 180mm, lathe with dimension display, max weight on lathe between points 10tns with one steady rest 12tns, estimated weight of lathe and tooling 14450kg. Podpfxjq R Rknj Amiogk

Condition: excellent (used), Year of construction: 2007, I sell the 2-lamp UV-drying tunnel Cefla UV 2000 M2 TTE 2000 Year 2007 Working width 1400mm. Total length 2,00m Very good condition, available immediately. Pedpfx Ajyzr Agsmijgk

Condition: as good as new (ex-display), Year of construction: 2009, Dryer with direct heating (L=1300mm) - Number of lamps ..... 1 - Lamp power (80 W/cm2) ..... 11.4 kW (100 W/cm2) ..... 14.3 kW (120 W/cm2) ..... 17.2 kW - Power of the exhaust fan ..... 0.55 kW Pgjdporyw Eiefx Amijk - Air flow of the exhaust fan outlet fan..... 900 m3/h - Installed power (120 W/cm2) ..... 17.7 kW - Minimum length of workpieces workpieces..... 400 mm - Maximum thickness of workpieces workpieces..... 70 mm - Maximum width of workpieces workpieces..... 1300 mm - Compressed air consumption ..... 4NI/cycle In addition, a set of new lamps included.

Condition: used, Year of construction: 2002, functionality: fully functional, Working width 1350 mm Max thickness 140 mm Podpfx Ajxwwhwemiogk Type Bottom Nbr of units 2 Total installed power 2.2 kW Length x width x height 2700.0 × 3200.0 × 2400.0 Weight 3500 kg

Condition: like new (used), functionality: fully functional, load capacity: 2,000 kg, Equipment: foot remote control, Demmeler Ergonomix M-2000 Perforated Plate, original 1.0m, diagonal 1.1m, 28mm holes Almost unused, like new, top condition Thanks to the ingenious arrangement of the entire mechanism, the developers at Demmeler have succeeded in creating an unbeatable large working area while maintaining a compact footprint for the Demmeler Ergonomix®M manipulator. The manipulator always brings maximum loads into the ideal position. A special feature of the Demmeler Ergonomix®M product family is the wide swivel range of up to 180°. This provides a decisive advantage for many workpieces, allowing them to be fully machined in one clamping setup without the need for additional repositioning. Payload 2000 kg Model M2000 A = min 490 mm B = max 970 mm C = max 1480 mm D = max 1000 mm Pgodjy Hl N Dopfx Amiok Torque 1250 Nm Tilt Angle 180° Tilting Moment 8000 Nm

Condition: excellent (used), Year of construction: 2019, Krauss Maffei KM 250-2000 CX Blue Power with Sepro Industrial Robot SR S5-35HL S4 Trans Year of manufacture: 2019 Injection Unit: Screw diameter: 70 mm Shot weight: 980 g Injection pressure: 1877 bar Metering volume: 1077 cm³ Clamping Unit: Clamping force: 250 t Tie bar spacing: 630x630 mm Platen dimensions: 995x1050 mm Ejector: hydraulic Clamping unit: hydraulic Control: MC6 – touchscreen Psdpfx Amoy Dqiwsijgk Additional Equipment: Very good technical condition Operating hours: approx. h in automatic mode Euromap 67 Robot interface Air valve with vacuum measurement x 1 Air valve x 1 Hydraulic core pull x 3 Pneumatic core pull x 1 Hot runner control x 16 Hardened injection unit – bimetallic Energy-efficient machine – equipped with a system of 3 variable displacement hydraulic pumps Parallel movements Proportional valve on injection unit – precise injection Additional oil filtration pump Sepro Industrial Robot SR S5-35HL S4 Trans Year of manufacture: 2015 5-axis robot: 4 axes driven by servomotors (electric): X, Y, Z, B; C axis Touch screen control panel Robot safety package Robot with adapter, conveyor belt, and safety enclosure Purchase of robot and conveyor belt available at an extra charge Dimensions: Weight: 20,100 kg Length/Width/Height: 6.50x2.20x2.30 m All machines offered are started up by our service technicians before sale. A video of the technical tests of the selected machine can be provided or it is possible to participate in live technical tests at our facility in Łódź. Price: On request

Condition: reconditioned (used), functionality: fully functional, year of last overhaul: 2026, warranty duration: 3 months, input voltage: 400 V, DGUV certified until: 05/2027, electrical fuse: 16 A, input frequency: 50 Hz, Whipping and Mixing Machine TOP Rego Model: SM 2000 M The machine when it comes to whipping! With timer automation 2 operating functions: 1 x Mixing / 1 x Whipping 1 mixing whisk, 1 whipping whisk 1 32-litre stainless steel bowl Bowl lighting Pedpfjw Hk Daex Amiogk Connection: 400V, 16A CEE plug Quality from professional workshop! Refurbished used machine with warranty & spare parts service Option: Additional accessories Ring gas burner Maintenance contract Service package Delivery service Instructions / Commissioning Further TOP mixing machines in stock!

Year of construction: 2013, condition: ready for operation (used), travel distance X-axis: 2,200 mm, travel distance Y-axis: 1,750 mm, controller manufacturer: HEIDENHAIN, overall weight: 6,000 kg, total width: 600 mm, total height: 2,000 mm, spindle motor power: 35,000 W, product length (max.): 1,400 mm, spindle speed (max.): 18,000 rpm, number of axes: 3, This 3-axis Eumach LBM-2000 was manufactured in 2013. It features a generous table dimension of 2100 x 1600 mm and impressive axes strokes of 2200 x 1750 x 650 mm. The machine is equipped with a HEIDENHAIN controller and offers a maximum rotation speed of 18000 rpm. If you are looking to get high-quality milling capabilities, consider the Eumach LBM-2000 bed type milling machine we have for sale. Contact us for further details. • Table Dimensions (X/Y): 2100 x 1600 mm • Forward Speed: 10000 mm/min Pgsdey Amngspfx Amijk

Condition: excellent (used), Year of construction: 2010, total height: 3,300 mm, total length: 5,600 mm, total width: 4,300 mm, table load: 2,000 kg, overall weight: 10,500 kg, Spindle SK 40 Speeds 8000 Rpm with 165 Nm Workload 2000 Kg ATC 56 Positions Hours spindle 10.304 Closed housing with automatic top door IKZ Coolant system LTA Air Cleaning Pgedpfeyh U E Hex Amijk Length:5600mm Width:4300mm Height:3300mm Weight:10500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, HEDELIUS RS 60 MAGNUM-2000 is a 5-axis machining center engineered for precision, high accuracy and reliable performance. Working capacities: table 1,200 x 600 mm (Ø 680 mm), table load max 300 kg; travels X 2 mm, Y 620 mm, Z 520 mm, swivel A +15 / -95°. Main specs: spindle nose SK40, speed 50–12 rpm, torque 121 Nm; feed 0–45 mm/min, rapid 45 m/min, max feed force 7 N; supply 3x400 V 50 Hz, total power 25 kVA; machine weight ≈11 kg, dimensions 5,400 x 4,300 x 3 mm; tool change 3 s, tool Ø max 80 mm, length 330 mm, weight 8 kg. Equipment: 56-place tool magazine, 1,250 l coolant, 80 bar high-pressure coolant, Renishaw probe, chip conveyor, oil-mist extractor, switch-cabinet AC, full enclosure. Delivers tight tolerances; suited to automotive, aerospace, medical, watchmaking and machine-building. Pjdeyxn Nqjpfx Amijgk

Condition: reconditioned (used), functionality: fully functional, year of last overhaul: 2026, input voltage: 400 V, DGUV certified until: 05/2027, overall weight: 320 kg, electrical fuse: 16 A, input frequency: 50 Hz, empty load weight: 320 kg, Anschlagmaschine Rego SM 2000 Mixer with automatic timer control 1 mixing whisk, 1 beating whisk 1 x 32-litre stainless steel bowl Bowl illumination Connection: 400V, 16A CEE plug Refurbished used machine Pgjdsygcxbjpfx Amiek with warranty and spare parts service Quality from a professional workshop! Benefit from over 35 years of experience! Option: Additional accessories Ring gas burner Maintenance contract Service package Delivery service Instruction / commissioning Many more mixers in stock!

Condition: good (used), Year of construction: 1982, sheet width 2000 mm plate thickness 2 mm distance between columns 2080 mm total power requirement 2,2 kW weight of the machine ca. 2,8 t dimensions of the machine ca. 3,0 x 1,2 x 1,5 m Pjdpfsw N S Eijx Amiegk Hydraulic swivel bending machine - max. dimensions of the sheet to be bent: 2000 x 2 [mm] - Power of the electric motor: 2,2 kW - Bending angle: 0 - 180 degrees

Condition: used, Year of construction: 1991, functionality: fully functional, travel distance X-axis: 1,830 mm, travel distance Y-axis: 940 mm, travel distance Z-axis: 1,000 mm, We offer this used WAGNER WM 2000 milling machine, year of manufacture 1991. Model: WM 2000 Machine serial no.: 9109330 Year of manufacture: 1991 Psdpfx Amoyub Scoisgk If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: not inspected (used), Year of construction: 2005, functionality: unexamined, machine/vehicle number: 27876, overall weight: 4,000 kg, total length: 7,000 mm, total width: 2,500 mm, total height: 2,700 mm, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates timely collection between 08/04/26 and 16/04/26! Pgjdpoyk Hlmefx Amisk TECHNICAL DETAILS Robot system: IRB 1400 M 2000 MACHINE DETAILS Operating voltage: 3 x 400 V Frequency: 50/60 Hz Connection: 4.5 kVA Dimensions & weight L x W x H: 7000 x 2500 x 2700 mm Machine weight: 4 t External reference: 8

Condition: used, Year of construction: 2000, Manufacturer: STAM Model: Stam 2000-3 Year: 2002 Condition: Used Stock number: 0395 Uncoiler – max. weight (ton): 30 ton Uncoiler – max. width (mm): 2,000 mm Psdeywd Akjpfx Amiegk Uncoiler – min. width: 400 mm Uncoiler – outer coil diameter: 1,800 mm Uncoiler – hydraulic expansion: 508 mm min. 610 mm max. Straightener – strip width: 2,000 mm Straightener – max. strip thickness: 3 mm Straightener – min. strip thickness: 0.6 mm Straightener – number of rolls: 17 Straightener – roll diameter: 46 mm Electronic feeder – min. pitch: 250 mm, max. pitch: 4,000 mm.

Condition: new, Year of construction: 2026, functionality: fully functional, total width: 2,710 mm, total length: 1,660 mm, total height: 2,975 mm, maximum load weight: 3,000 kg, tank capacity: 2,380 l, overall weight: 150 kg, year of last overhaul: 2026, Ultrasonic cleaning unit with a capacity of 2,380 litres. This ultrasonic cleaning machine is equipped with a pneumatic lifting platform with a load capacity of up to 1,500 kg. The lift has three main functions, which are: Podpoypcunjfx Amijgk 1. To assist with the loading and unloading of parts to be cleaned. 2. Assisting with cleaning in hard-to-reach areas, creating a gentle movement of the fluid that helps remove loosened dirt particles. 3. Preventing the ultrasonic action from concentrating on a single point, thereby avoiding marking on the parts to be cleaned when these are made of soft metals such as aluminium or zamak. Ultrasonic cleaning system with patented technology This ultrasonic machine is designed to cover a wide variety of industrial applications. Some of the main applications include: 1. Parts cleaning: Metal parts or mechanical components requiring the complete removal of residues and oils prior to assembly. 2. Degreasing of parts: Removal of grease and oil in equipment manufacturing and maintenance. 3. Stripping and removal of adhered contaminants: Removal of rust, varnish and other impurities. 4. Cleaning in the mechanical industry: Removal of welding residues and particles from electronic components without damaging them.

Condition: new, *AVAILABLE IMMEDIATELY* with steel sheet walls, 4x support legs Special price for demonstration stock vehicle from 2023 – No initial registration!! Technical data: • Type: New vehicle • TÜV: New/2 years • Availability: IMMEDIATE! • Permissible total weight: 2000 kg • Unladen weight: approx. 661 kg • Payload: approx. 1,339 kg • Internal dimensions: 288 x 194 x 200 cm (L x W x H) • Overall external dimensions: 447 x 250 x 256 cm (L x W x H) • Loading edge height: approx. 52 cm • Tyres: 13-inch alloy wheels • Brakes: Yes • Jockey wheel: Yes • 100 km/h approval: optional at extra cost • Vehicle documents included Equipment: • Robust V-drawbar, fully hot-dip galvanized • KNOTT overrun brake system • 18 mm thick floor plate • Reinforced steel sheet side walls and roof • Rear double-wing doors • Lever lock on rear doors • 6 tie-down rings on the floor • Jockey wheel • Auto-reversing system • Plastic mudguards • 13-pin connector • Reverse light • Large-size safety lighting Pjdpfx Aoyyw Iromiegk • Integrated rear fog light • Body: splash-water protected • Registration documents: ZBII & COC papers Optional accessories (available on request): • Anti-theft device • Lashing straps • Additional lashing eyes • Slat rails with rubber coating for lashing straps & load bars • Load bars in steel or aluminium • Interior lighting • Reversing light • and much more New vehicle with warranty and TÜV. - Financing or leasing available - Nationwide delivery possible - Vehicle registration document dispatch in advance or transfer plates (Germany) can be provided. - Export plates including customs registration possible Descriptions and images are copyright protected!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available! For over 30 years: specialist dealer and service workshop for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Ifor Williams / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix and many more brands. - Errors, omissions and prior sale excepted -

Condition: like new (used), functionality: fully functional, load capacity: 2,000 kg, Demmeler Robotix L Manipulator 3-Axis 360° rotation, 360° tilting (overhead), with height adjustment (virtually silent) Excellent condition (like new) Pjdpfx Aoyupl Dsmijgk Minimum height: approx. 486 mm (tilting axis 0° horizontal) Maximum height: approx. 1438 mm (tilting axis 0° horizontal) Minimum height: approx. 525 mm (tilting axis vertical) Maximum height: approx. 1477 mm (tilting axis vertical) Lower arm length 1500 mm (radius) Upper arm length 1900 mm (radius) Connection: 16 A plug Overall height 3250 mm Rotational speed approx. 0.2 - 2.0 rpm Torque 24000 Nm Lifting speed 1.5 m/min Handheld remote control

Condition: new, Number of sanding units 4 St sanding width 190 mm Sanding height max. 2 - 180 mm LÖWER - DoubleMaster DSM 2000 DB ----- Double-sided single wood sander with additional Transverse brush sanding unit (discs) and Longitudinal brush sanding unit (roller) for sanding Solid wood such as B. window wood etc. Stable top version with long cast tables and Conveyor belt feed. Suitable for high continuous loads even with higher chip removals. 1. Belt sanding unit with CERMET sanding shoe pre-sanding 2. Disc aggregate cross grinding for defibering 3. Rolling aggregate longitudinal grinding for directional finish Direction of growth - Staggered sanding and finishing units at the top and below - directly driven rubberized sanding rollers for slip-proof free power transmission - Combined grinding via roller and shoe for high chip removal with a flat intervention zone at the same time - maintenance and wear-free CERMET-coated grinding wheels shoes with very good thermal conductivity and absolute Dimensional accuracy - External cooling of the grinding zones for cooler grinding and longer sanding belt service life - force-guided pneumatically controlled sanding belt oscillation - effective sanding dust extraction directly on the Grinding rollers - Airborne dust extraction on the tension rollers - integrated brush grinding device (transverse and Longitudinal) with sanding dust extraction - motorized grinding thickness adjustment via precision threaded spindles and large-sized linear ball screws bearing sets on hardened and ground precision shafts with dust and dirt protection - Adjustment of the chip removal at the bottom via precision Threaded spindle with dimension display via scale ring (Resolution 0.1mm) - Sanding belt tension via pneumatic cylinder constant clamping pressure - Sanding belt change with pneumatic belt relaxation Within seconds - Adjustment option for the sanding belt run Band change - electro-pneumatic compressed air monitoring - Anti-running protection via contact roller if it is too thick workpieces Pgedpfx Aoyrty Homisk - Workpiece transport via calibrated non-slip and non-stick fixed conveyor belts over heavy, 1000mm long cast iron tables with a finely planed surface and spring-loaded Pressure rollers with fine adjustment - Cardan shaft drive for smooth and consistent Workpiece transport - Feed gear motor infinitely variable for quick adaptation to different types of wood - all motors electrically protected - ergonomically arranged controls on the Workpiece inlet side - digital thickness display (resolution 0.1mm) with modern Magnetic tape system Technical data: - Sanding belt speed 22 m/s - Sanding belt length 1800mm - Sanding belt width 200mm - Working width 190mm - Grinding thickness 2-180mm - two brake motors for 5.5 kW drive - Feed motor 1.0 kW - Feed speed 4-20m/min. - automatic height adjustment 0.37 kW - Brush sanding units Disc D=max. 200mm Roller D=max. 270mm - Suction nozzles 2 x 120mm and 2 x 180mm - Pneumatic connection 6 bar - Working height 870mm External dimensions: - Length 2600mm - Length with wheels 2985mm - Width 880mm - Height 1910mm - Weight approx. 1500 kg - Operating voltage 400 volts, 50 Hz, 3P - CE version ----- Price of the above machine on request! ----- Special accessories with additional charge: Workpiece blow-off - ...

Condition: refurbished (used), Year of construction: 2012, functionality: fully functional, GF AgieCharmilles FORM 2000 HP Year of manufacture: 2012 C-frame design, fixed table with lowering tank Travel (X/Y/Z): 400 x 300 x 350 mm Table to quill distance: 170-520 mm Max. workpiece size (L x W x H): 820 x 580 x 250 mm Max. workpiece weight: 800 kg Integrated C-axis for rotation, indexing, and EDM (U=0-100 rpm) Pneumatic chuck of your choice (Erowa/3R Systems) ISPG generator with 60 Amps Best attainable surface finish: Ra 0.10 µm AGIEVISION 5 control interface 15” LCD color screen, mouse or touchscreen, lift keyboard, and manual control unit Including EROWA ERC 80 robot - Electrode changer - Pallet changer Net weight of the machine: 3,830 kg Machine dimensions: 1,410 x 2,460 x 2,660 mm Upon order confirmation, the machine will be cleaned, serviced, and tested by us. Optional: Pgodpfx Amoyniyusiek - Commissioning and training - Transportation and installation - Cooling unit - Dielectric fluid

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, travel distance X-axis: 13,000 mm, travel distance Y-axis: 5,000 mm, travel distance Z-axis: 1,200 mm, spindle speed (max.): 2,500 rpm, position of the milling head: Testa ad assi ortogonali indexati - TTL2 25 360, spindle diameter: 180 mm, travel distance W-axis: 1,000 mm, table load: 100,000 kg, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, table length: 3,000 mm, table width: 3,500 mm, quill travel distance: 2,500 mm, quill diameter: 180 mm, spindle stroke: 1,000 mm, workpiece weight (max.): 100,000 kg, torque: 9,050 Nm, CNC BORING MACHINE PAMA mod. SPEEDRAM 2000 Hydrostatic CNC Control: Siemens Sinumerik 840D Axis X: 13,000 mm Axis Y: 5,000 mm Axis Z: 1,200 mm Axis W: 1,000 mm Total axial travel (Z+W): 2,200 mm Working feed on all axes: 8,000 mm/min Rapid traverse on all axes: 20,000 mm/min Spindle: Pjdpfx Amjyxg Hbjijgk Boring spindle diameter: 180 mm Spindle carrier ram dimensions: 400 x 440 mm Spindle speed (3 ranges) max: 2,500 rpm Spindle power (S1): 91 kW Spindle nominal torque (S1): 9,050 Nm Spindle internal taper: ISO 50 DIN 69871 AD-Type Big Plus Orthogonal axis indexed head – TTL2 25 360 Tool taper: ISO 50 DIN 69871/2 AD-Type Big Plus Max spindle power: 25 kW Max spindle speed: 2,500 rpm Speed ratio: 1:1 Spindle indexing: +/- 100°, 200 positions per 1° Head indexing: +/-180°, 360 positions per 1° Max spindle nominal torque: 1,000 Nm TH 100 rotary-travelling table: Table dimensions: 3,000 x 3,500 mm Table load capacity: 100 Ton Central T-slot size: 36h7 mm Lateral T-slot size: 36h12 mm T-slot pitch: 320 mm Longitudinal travel V-axis: 2,500 mm Feed/rapid traverse V-axis: 10,000 mm/min Chain-type tool magazine with 80 tools (capacity CU 145 R80) Machine weight approx. 160/165 Ton Complete with: - Hinged belt chip conveyor - No. 02 side chip conveyors for rotary table - Fixed closed accessory magazine with 2+1 positions - Fixed tool rack (ISO50, 6 positions) - Internal and external tool coolant system, 30 bar - Wireless workpiece probe (Renishaw) USED MACHINE YEAR: 2009

Condition: used, Year of construction: 1988, Technical details: Pgedpfxju Ib Dfs Amijk plate width: 2050 mm plate thickness: 2 mm distance between columns: 2400 mm knife length: 2050 mm stroke adjustment: oben 250 mm adjustment of stroke: unten 100 mm bending angle max.: 180 ° back gauge - adjustable: mit Aufnahmeschienen mm working pressure: 5,0 MPa total power requirement: 2,2 kVA weight of the machine ca.: 2,3 t dimension machine xH: 3,5 x 1,0 x 2,2 m dimensions of hydaulic: 0,75 x 0,55 x 0,80 mm HYDRAULIC FOLDING MACHINE operation via control panel with boom as well as via foot switch bending angle: sharp bending = up to 135° with 2mm sheet metal stroke of the upper beam = 250mm stroke of the lower beam = 100mm bending jaw stroke = 100mm bending gap = 7mm with scale display *

Condition: like new (used), mileage: 2,200 km, Year of construction: 2021, OPEL CORSA FULLY ELECTRIC, YEAR 2021, COMMERCIAL VEHICLE WITH 2 SEATS, ONLY 2,200 KM, AUTOMATIC TRANSMISSION, LED HEADLIGHTS, PARKING SENSORS, STEERING WHEEL CONTROLS, AS NEW. RANGE 350 KM. FINANCING OR LEASING AVAILABLE ON SITE. Pjdpfx Amjyx Hqajiogk

Condition: good (used), Year of construction: 2005, travel distance X-axis: 12,000 mm, travel distance Y-axis: 3,500 mm, Technical Specification - X-axis (longitudinal travel - table): 12,000 mm - Programmable feed rate: 0.5 – 6,000 mm/min - Rapid traverse: 20,000 mm/min - Motor speed: 3,000 rpm - Y-axis (vertical travel / column): 3,500 mm - Programmable feed rate: 0.5 – 6,000 mm/min - Rapid traverse: 20,000 mm/min - Motor speed: 3,000 rpm - Rated torque (motor): 42 Nm Z - W-axis (spindle head): - Boring spindle diameter: 150 mm - Axial stroke of boring spindle (Z): 1,200 mm - Rapid traverse Z-axis: 20,000 mm/min - Internal taper of boring spindle: DIN 69871, ISO 50 - Spindle diameter: 254 mm - Spindle front bearing inner diameter: 200 mm - RAM dimensions: 400 x 400 mm - Axial stroke of boring spindle (W): 1,000 mm - Rapid traverse W-axis: 15,000 mm/min - Total axial stroke (Z+W): 2,200 mm - Rated torque spindle motor W and Z-axis: 42 Nm - Number of spindle gearbox speeds: 2 - Spindle speed range: 6 – 3,500 rpm - Spindle motor power: 60 kW Clamping plate sections: Psdpfx Ajyuxd Njmiogk - Dimensions: 2 units @ 1,500 x 4,500 mm, 1 unit 2,000 x 4,500 mm - Load capacity: 15,000 kg/m² Workpiece table (axes V1 - B1 / V2 - B2): - Table dimensions: 2,000 x 3,000 mm - T-slot size: 28 mm - T-slot pitch: 180 mm - Table top height from floor: 650 mm - Load capacity: 40 t Tool rack magazine ATC 13-150 R 147 - Maximum magazine capacity: 147 tools - Maximum tool weight: 35 kg - Maximum tool length: 700 mm - Tool taper: DIN 69871 - Tool change time: 28 sec Milling head with indexed vertical axes, model TTL 2 18 360 - Tool holder: ISO 50, DIN 69871 EQUIPMENT: - CNC control: Heidenhain iTNC 530 - Electronic handwheel - Chip conveyor (manufactured: 2023) - CE marking - Documentation