Welding turntable,Turntable,Positioner

Demmeler Ergonomix M-2000

Condition: excellent (used), functionality: fully functional, Equipment: documentation/manual, foot remote control, Demmeler Ergonomix M-2000 with original set of 2 perforated plates, 2.4 m x 1.2 m, plus octagonal 3D table top, 1.1 m, with 28 mm holes Plasma nitrided Almost unused, like new, in top condition Complete with accessories and technical documentation Thanks to the sophisticated arrangement of the entire mechanism, Demmeler’s developers have succeeded in creating an unbeatable large working area while maintaining a small footprint for the Demmeler Ergonomix® M manipulator. The manipulator always positions the heaviest loads in the ideal location. A special feature of the Demmeler Ergonomix® M product family is the large swivel range up to 180°. This provides a decisive advantage for many workpieces, allowing them to be completely machined in a single setup without additional rotation. Load capacity 2000 Model M2000 A = min 490 B = max 970 C = max 1480 Fsdpez Hvy Uofx Am Esgi D = max 1000 Torque 1250 Tilt angle 180° Tilt moment 8000

Condition: new, Year of construction: 2025, Protec Welding Turntable, 5000 kg load capacity Variable speed control, 0.05 - 0.5 RPM Fjdpsid Szcofx Am Eegi Handheld remote control Height: 600 mm Diameter: 1500 mm Foot pedal remote control available at an additional cost.

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, working width: 4,060 mm, stroke length: 300 mm, throat depth: 1,000 mm, distance between stands: 4,200 mm, operating speed: 90 mm/s, table height: 1,000 mm, back gauge travel distance R-axis: 150 mm, overall weight: 17,000 kg, total length: 5,300 mm, total width: 1,950 mm, total height: 3,000 mm, warranty duration: 6 months, pressing force: 200 t, Equipment: safety light barrier, SAFANDARLEY E-Brake press brakes have an electric drive. Lenze servomotors controlled by inverters from the same company allow for fast and reliable operation of the system. Fgsdpfxjvpqpio Am Eoi Additionally, the machine consumes electricity mainly when the slider goes down. The slider returns using the force resulting from the spring package on both sides of the machine. When the machine is not in use, it does not consume electricity because there is no pump in the system as in hydraulic presses. Electricity consumption is estimated at 70% lower than in conventional hydraulic presses. Servo-electric press brake SAFANDARLEY model E-Brake Pressure 3000 kN (300 tons) Slider stroke 300 mm Opening Q=690 mm Upper beam exit speed 90 mm/s Upper beam accuracy +/- 0.01 mm CNC controlled axes: Y1-Y2 - upper beam control with the possibility of using skews X - bumper beam exit (gives the dimension of the bent element). Very high positioning accuracy. delta X - independent bumper finger used for skewing R - bumper beam top/bottom, stroke 200mm Z1-Z2 - bumper fingers sliding along the bending line (speed 2000mm/s) Max bumper finger speed 350mm/s Max bumper finger range (third reference point range in X axis) 1000mm R axis bumper range 200mm Connected power 22kW (controlled by inverter) Weight 17,000kg Machine width 5,300 mm Machine depth 1,950 mm Machine height 2,810 mm Power supply 3/N/PE 50Hz – 400/230V Servo-electric drive (without hydraulic system) Drive transmission by means of belts

Condition: new, functionality: fully functional, Year of construction: 2025, stroke length: 300 mm, operating speed: 75 mm/s, reverse speed: 75 mm/s, table height: 930 mm, overall weight: 7,500 kg, total length: 4,350 mm, total width: 1,820 mm, total height: 2,680 mm, input voltage: 400 V, input frequency: 50 Hz, pressing force: 100 t, table length: 3,060 mm, Equipment: CE marking, documentation/manual, safety light barrier, Unique opportunity for those seeking a top-of-the-line, immediately available CNC press brake. We offer a SafanDarley E-Brake 100-3100, 100% electric, a NEW machine installed in our showroom exclusively for technical demonstrations and customer presentations. The machine has never been used in production; the few operating hours are solely related to demonstration activities. Key features: • New machine from showroom • Never used in production • Ready for immediate delivery • High-efficiency electric technology • High bending accuracy and repeatability Fjdpfx Amezcmabe Esgi • Reduced operating and maintenance costs compared to traditional hydraulic presses Machine configuration: • EC20 Touch graphic touchscreen control with 2D bending simulator and automatic bending sequence calculation • Motorized and independent Z1+Z2 axes • Extra back gauge Z0+Z3 • Wila upper table with hydraulic locking • Wila lower table with mechanical locking and a set of bars for using Schiavi-type dies • Mobile aluminum front supports • Integrated photocells • Clear opening 590 mm / stroke 300 mm • Interface for Industry 4.0 The machine is offered for sale exclusively due to the renovation of the exhibition area and the replacement of the model currently in the showroom.

Condition: new, Fastech 3-Roll Round Bending Machine FRM 1050 x 90 Technical Specifications: Special equipment included in the price: hardened rolls motorized rear roll adjustment Fsdpfjhzq Dbox Am Esgi digital display Sheet metal width 1050 mm Sheet metal thickness 3.3 mm max. Sheet metal thickness for pre-bending 3.0 mm Roll length 1050 mm Roll diameter 90 mm Smallest bending diameter 130 mm Weight 475 kg Dimensions L-W-H 1750 x 800 x 1130 mm Motor: 1.1 KW Equipment: Top and bottom rolls, electrically driven Top roll can be pivoted out Taper bending device asymmetrical roll arrangement self-braking main motor separate control and operating panel Safety cable Values apply to St-37 / 240 N/mm² CE marking

Condition: used, pressure 50 t chamfer lenght 1500 mm distance between columns 1220 mm Control Cybelec DNC 1200 closing speed 95 mm/min working feed 1-10 mm/sec work stroke 156 mm Fgsdpera Rrhjfx Am Eji overrun time 59 ms tracking travel 6 mm throat 200 mm distance table - lower edge of ram 301 mm table width 160 mm table height 850 mm x-axis 550 mm travel R-axis +/- 50 Number of axles 3 (Y, X, R) St. weight ca. 3600 kg a lot of lower and upper tools incl. work light new control in 2003: Cybelec DNC 1200

Condition: new, We sell spare parts for the following milling machines: FN20, FNGJ20/30, FNGJ32, FNGJ40, FNGJ50, FNGP, FNG CNC FB3, FB4, FB5, FB6 as well as for lathes S32. Fjdpfsufgb Iex Am Eegi

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 104605-104645, input voltage: 400 V, total width: 1,500 mm, total length: 4,500 mm, total height: 2,820 mm, type of input current: three-phase, Fortuna Primus K4 – 4-row roll divider – rounder + depositor + GEK, year of manufacture 2011 Dough divider & rounder Condition: fully functional, directly from ongoing operation Application: round rolls, e.g., Kaiser rolls, braided rolls, salt rolls, wheat & mixed doughs • Weight range: approx. 40-110/120 g • Hourly output: approx. 4,800 pieces/hour • Rounding chamber height: approx. 10–35 • Rounding speed: scale 0–30 Fgsdey St U Sjpfx Am Eoi • Hopper volume: 20–25 kg • Dough yield: TA 160–165 • Connection power: approx. 1.5 kW • Machine weight: 650–700 kg • Depositor: for 60 × 80 cm trays (58–78) _____ Equipment • Fortuna Primus K head machine • 4 rows • GEK pre-fermentation cabinet matching the line • Rounding/stamping sets: Kaiser rolls, braided rolls, salt rolls • Complete depositor • Immediately ready for operation • In use until recently • Clean, well-maintained, regularly serviced • No known defects • Electronics modernized (new display) INSPECTION and TRIAL RUN possible (only) by appointment Freight possible, fully assembled with a jumbo truck (L/W/H = approx. 4,500 mm x 1,500 mm x 2,820 mm)

Condition: good (used), We offer a range of tools for press brakes, almost exclusively from the Trumpf brand: OW / OWZ: Upper tool (punch), Top Tool UW / UWZ: Lower tool (die/matrix), Bottom Tool/Die Details, prices and specifications: OVERVIEW OF INDIVIDUAL SETS (Radius / Angle / Composition): 1. Upper tool (punch) – OW 210/S (R1 / h-240 / 28°) Set composition: 3 pcs x 500 mm, 8 pcs x 300 mm, 2 pcs x 250 mm, 4 pcs x 200 mm, 1 pc x 170 mm, 1 pc x 140 mm, 1 pc x 110 mm, 3 pcs x 100 mm, 2 pcs x 100R mm, 2 pcs x 100L mm, 1 pc x 75 mm, 2 pcs x 50 mm, 1 pc x 45 mm, 1 pc x 40 mm, 2 pcs x 35 mm, 2 pcs x 30 mm, 2 pcs x 25 mm. Total length of the set: 6.760 m Price per meter: 1,069 EUR Fgedpfx Amozrw A Rj Eji Total price of the set: 7,226 EUR 3. Lower tool (die) – EV 004 - W12 (R1 / h-150 / 30°) Set composition: 5 pcs x 500 mm, 1 pc x 200 mm, 1 pc x 180 mm, 3 pcs x 100 mm, 1 pc x 55 mm, 1 pc x 50 mm, 1 pc x 45 mm, 1 pc x 40 mm, 1 pc x 35 mm, 1 pc x 30 mm, 2 pcs x 25 mm. Total length of the set: 3.485 m Price per meter: 802 EUR Total price of the set: 2,794 EUR 4. Upper tool (punch) – OW 202 K (R1 / h-120 / 28°) Set composition: 6 pcs x 500 mm, 1 pc x 300 mm, 1 pc x 200 mm, 1 pc x 100 mm, 1 pc x 100R mm, 1 pc x 100L mm, 1 pc x 50 mm, 1 pc x 45 mm, 1 pc x 40 mm, 1 pc x 35 mm, 1 pc x 30 mm, 2 pcs x 25 mm. Total length of the set: 4.050 m Price per meter: 735 EUR Total price of the set: 2,976 EUR 7. Upper tool (punch) – OW 280/K (R0.5 / h-140 / 80°) Set composition: 1 pc x 500 mm, 1 pc x 300 mm, 1 pc x 100R mm, 1 pc x 100L mm, 1 pc x 100 mm, 1 pc x 50 mm, 1 pc x 45 mm, 1 pc x 40 mm, 1 pc x 35 mm, 1 pc x 30 mm, 2 pcs x 25 mm. Total length of the set: 1.350 m Price per meter: 735 EUR Total price of the set: 992 EUR 8. Lower tool (die) – EV 005 W16 (R1.6 / h-150 / 30°) Set composition: 6 pcs x 500 mm, 1 pc x 300 mm, 3 pcs x 100 mm, 1 pc x 50 mm, 1 pc x 45 mm, 1 pc x 40 mm, 1 pc x 35 mm, 1 pc x 30 mm, 2 pcs x 25 mm, 1 pc x 200 mm. Total length of the set: 4.050 m Price per meter: 802 EUR Total price of the set: 3,247 EUR 9. Lower tool (die) – EV 006 W 20 (R2 / h-150 / 30°) Set composition: 6 pcs x 500 mm, 2 pcs x 300 mm, 1 pc x 200 mm, 3 pcs x 100 mm, 1 pc x 50 mm, 1 pc x 45 mm, 1 pc x 40 mm, 1 pc x 35 mm, 1 pc x 30 mm, 2 pcs x 25 mm. Total length of the set: 4.350 m Price per meter: 802 EUR Total price of the set: 3,487 EUR Please feel free to request a customized price for the entire tool package!

Condition: good (used), Kemper SP125 A Fedpfx Amova Riko Esgi 2 speeds 2 stainless steel bowls Stainless steel spiral and bar Machine works perfectly and is in very good condition