Used Rover 23 for sale (4,822)

Condition: excellent (used), Year of construction: 2015, For sale: 4 units of CNC ROVER BIESSE 2231. Years of manufacture: 2013, 2014, 2015, 2016. In very good condition. Fgedpfx Alsx Tbk Ro Ueh

Condition: ready for operation (used), Year of construction: 2021, total width: 5,851 mm, travel distance X-axis: 3,140 mm, travel distance Y-axis: 1,260 mm, travel distance Z-axis: 245 mm, overall weight: 3,000 kg, controller manufacturer: BIESSE, controller model: HH660 PC-based control, spindle motor power: 13,200 W, product length (max.): 7,116 mm, spindle speed (max.): 24,000 rpm, number of axes: 4, This 4-axis BIESSE Rover A 1232 was manufactured in 2021. It features a working area of 3140 mm in the X-axis, 1260 mm in the Y-axis, and a Z-axis travel of 245 mm. The machine is equipped with an electrospindle power of 13.2 kW and a maximum tool diameter of 113 mm. If you are looking to get high-quality CNC routing capabilities, consider the BIESSE Rover A 1232 machine we have for sale. Contact us for further details. • Power supply voltage 400 VAC • Full load current 31.7 A • Number of power supply phases 3 • Installed power 18.66 kW • Frequency 50 Hz • Short circuit protection rating 10 kA RMS Sym • Working area X 3140 mm • Working area Y 1260 mm • Working area Z 245 mm • Max panel thickness: depends on vacuum module height (H74 / H29) and tooling Fgodpfjzugwpox Al Ujh • Workpiece support length 1200 mm • Vacuum pump capacity 90 m³/h • Vacuum pump capacity 108 m³/h at 60 Hz • Vacuum system dry pump • Electrospindle power 13.2 kW • Electrospindle speed 12000 to 15000 rpm S1 • Electrospindle speed 12000 to 24000 rpm programmable • Tool holder HSK F63 • Rotation clockwise and counterclockwise • Two separate magazines installed: • 8-position tool magazine (rear / Y-axis area) • 13-position tool magazine (main X-axis unit) • Maximum tool diameter 113 mm • Maximum tool length 110 mm • Maximum tool weight 7.5 kg • Maximum total magazine weight 32 kg • Vacuum system:Configurable vacuum pump system. Available configurations include:– 2 × 90 m³/h– 2 × 100 m³/h– 1 × 250 m³/h

Condition: used, Technical Specifications - Working range of the X-axis: 3,260 mm - Working range of the Y-axis: 1,260 mm - Working range of the Z-axis: 165 mm - Machine design: Gantry - Tool magazine capacity: 16 positions - Power of the electric spindle: 19 kW - Total power consumption: 20 kW Fgsdjzutq Aopfx Al Ush

Condition: used, machine/vehicle number: 008560, X axis working area: 3140 mm Fgedpjzvwtqjfx Al Ujh Y axis working area: 1260 mm Working Table: Pod and Rail Main Electrospindle power: 13.2 KW Number of controlled axes: 3 axes Number of controlled axes: 3 axes Total number of drilling spindles: 16 Total number of tool changer positions: 13

Condition: used, machine/vehicle number: 008013, X axis working area: 5780 mm Y axis working area: 1650 mm Working Table: Pod and Rail Main Electrospindle power: 13.2 KW Number of controlled axes: 4 axes Maximum edge height: 60 mm Total number of drilling spindles: 16 Total number of tool changer positions: 16 Fgjdswuz Ekspfx Al Uoh

Year of construction: 2022, operating hours: 180 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 2005871-N650050, Machine Overview Machine Name: 2022 Neomec Rover Cab 1000 x 2700 Automatic Spraying Machine Condition: Used / Lightly Used Origin: Made in Italy Location: Near Sofia International Airport (10 minutes away), Bulgaria Fodpfx Aloz D S Age Usgh Technical Specifications & Features Application: Automatic spraying machine designed for both flat and dimensional items. Integration: Designed to operate inside a conventional spray booth (Note: spray booth is not included). Fluid System: Equipped with an industrial Binks (CFT) pneumatic fluid handling / agitator system. Logistics & Inspection In-Person Inspections: Highly convenient location just 10 minutes from Sofia International Airport for easy buyer visits. Shipping: International shipping can be arranged upon request (Buyer covers shipping costs). For questions, additional information, or to schedule an inspection, please send a message or give us a call.

Condition: excellent (used), functionality: fully functional, cutting height (max.): 130 mm, total length: 2,000 mm, total height: 130 mm, cutting width (max.): 230 mm, total width: 230 mm, overall weight: 3,000 kg, SCM Superset 23 – Four-Sided Planer – 5 Heads – 230 × 130 mm – FOUR-SIDED PLANING MACHINE! Professional SCM Superset 23 four-sided planer, renowned Italian manufacture. The machine is equipped with 5 spindles, stepless feed rate adjustment via a frequency inverter, and electric thickness setting. A robust feed system and pneumatic roller pressure ensure stable and precise guidance of the workpiece. The planer is used and in very good technical condition. The machine is suitable for professional wood processing in carpentry workshops, sawmills, and for the production of structural elements, moldings, boards, and timbers. KEY PARAMETERS: - maximum workpiece width: 230 mm - maximum workpiece height: 130 mm - number of spindles: 5 - spindle diameter: 40 mm - stepless feed rate adjustment via a frequency inverter - electric thickness setting - pneumatic roller pressure - central table lubrication - long infeed table: 1980 mm - machine enclosed in a cabinet SPINDLE ARRANGEMENT: Bottom horizontal spindle - working width: 230 mm - motor power: 4 kW Right vertical spindle - working height: 130 mm Left vertical spindle - working height: 130 mm Fjdpfszzx Iyjx Al Ujgh - total power of the 2nd and 3rd spindles: 7.5 kW Top horizontal spindle - working width: 230 mm - motor power: 5.5 kW - electric up/down adjustment Bottom horizontal spindle - working width: 230 mm - motor power: approximately 5.5 kW All spindles have adjustment in the appropriate directions: up/down and left/right. FEED SYSTEM: - 6 top metal, toothed feed rollers - double top discharge roller – smooth, rubber - 2 bottom rubber pull rollers - 2 bottom side pressure rollers - pneumatic roller pressure - stepless feed rate adjustment via a frequency inverter - feed motor: 3 kW OTHER TECHNICAL DATA: - body lifting motor: 0.37 kW - length of the infeed table: 1980 mm - central table lubrication - dust extraction port diameters: 5 × 130 mm - machine dimensions: 3600 × 1800 × 1750 mm - weight: approximately 3000 kg - country of manufacture: Italy - condition: used, very good Gross price, VAT margin. The machine is available from JBS Maszyny Stolarskie. We invite you to contact us by phone. You can view and inspect the machine before purchasing. We also assist with organizing transportation. JBS WOODWORKING MACHINERY Sale of professional woodworking machines

Condition: used, Year of construction: 2004, machine/vehicle number: PMPM000167, for Sparkling wine, wine and other beverages with CO2 Sekt, Wein und andere Getränke mit CO2. Rinsing Machine NOVA 20/1050 Counterpressure filler ELETTRA 1400/23 with 28 filling valves Capper-cork Machine DELTA 804 Eletrical Panel Pre-evacuation Pump Fgodpfx Asz Ri T Rsl Uoh Bottle format parts 375ml to 1500ml

Condition: good (used), Year of construction: 1998, I sell the 3-axis CNC working centre Biesse Rover 13S with beam table, year 1998. Configuration: 3-axis main spindle HSD 1 grooving saw X-direction Drilling head 10+4+2 spindles Useful working area 1540x1050mm. 1 working field, 2 clamping areas Fgedoz Ii Axjpfx Al Ujh Total power 10kW Pump Becker Additional vacuum outputs for raster works or connection of additional clamping devices. Good condition. Available immediately.

Condition: used, mileage: 212,000 km, power: 112 kW (152.28 HP), fuel type: diesel, gearing type: mechanical, first registration: 06/2010, next inspection (TÜV): 11/2026, emission class: euro5, color: black, number of seats: 5, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), had accident, * Land Rover Freelander XE 4x4 – Passenger car registration – TÜV valid until 11/2026 – Ready to drive – * 2.2 l diesel engine – Displacement: 2,179 cc – 112 kW / 152 hp – Euro 5 – Green emissions sticker – * - ATTENTION - VEHICLE HAS A TRANSMISSION ISSUE - WHEN WARM, 4TH / 5TH GEAR MAY JUMP OUT OCCASIONALLY - CAUSE UNKNOWN - VEHICLE IS DRIVABLE - SOLD AS IS - * VIN: SALFA2DC2AH198017 – German vehicle – German registration certificate – * Towbar with 2,000 kg braked towing capacity – 750 kg unbraked – * Vehicle available immediately – Preferably sold to trade / export / commercial operators * Please schedule an appointment for viewing – * Contact person: Mr. Andreas Vogel * The information provided online is non-binding. * It does not constitute guaranteed properties. Fgedjxqkzkepfx Al Ujh * The seller is not liable for typographical or data transmission errors. * Subject to changes, errors, and prior sale. Special features: Metallic paint finish Further equipment: Driver and passenger airbags, audio system: radio with CD player, electrically adjustable and heated exterior mirrors, onboard computer, brake assist, electronic brakeforce distribution, driver assistance system: Hill Descent Control (HDC), 5-inch color display, wheel locks, heated rear window, body style: 5-door, driver's knee airbag, head airbag system (windowbag), corner brake control (CBC), luggage compartment cover, lumbar support driver's seat (left), engine 2.2L – 112 kW Td4 CAT, rear park distance control, wheelbase 2,660 mm, tire repair kit, H4 headlights, side airbags, upholstery: fabric, front seat heating, start/stop system, traction control, roll stability control (RSC).

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, workpiece length (max.): 4,600 mm, workpiece width (max.): 1,935 mm, overall weight: 6,200 kg, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, This 5-axis BIESSE ROVER C9.5 Conf.3 was manufactured in 2010. Machine is still working in it original, first-time installation place here in Norway. All yearly services done by Biesse support. It features a large working area (X=4600 mm, Y=1935 mm, Z=275 mm), 5 vertical and 2 horizontal spindles, 5-axis electric spindle 11 kW HSK F63 4-axis electric spindle 11 kw HSK 63 3 units for storing of the tools. ETS system for positioning of 8 support beams and 32 vacuum cups 250 m3 Busch vacuum pump. Central lubrication Biesse Work Advantage version . It boasts high travel speeds (X/Y: 100 m/min, Z: 30 m/min) For all technical specification please read included data sheet below. If you are looking to get high-quality woodworking capabilities, consider the BIESSE ROVER C9.5 machine we have for sale. Fgedpfez Arvtsx Al Ujh Please contact Rekman Maskin & Service for future information. Rekman Maskin & Service work with Biesse machine since 1986

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Working area X: 3280 mm Working area Y: 1320 mm Working area Z: 170 mm 13.2 kW electrospindle Fsdpfx Aoz A Iglol Uegh Drilling heads for vertical drilling: 10 Drilling heads for horizontal drilling X: 4 Drilling heads for horizontal drilling Y: 2 Blade for grooving in the X direction 12-position revolver tool changer Work table with 6 rows Programming software: BiesseWorks 90 m3/h vacuum pump Safety mats Protective netting Approximate weight: 3000 kg Door and cone grooving unit with ISO30 connection available at an extra cost.

Condition: excellent (used), Year of construction: 2005, machine/vehicle number: 102940, WEINIG HYDROMAT H23 ELECTRONIC FEED FREQUENCY CONTROLLED. FEED MOTOR 22 KW 50MM SPINDLES WORKING WIDTH MAX. 230 MM WORKING HEIGHT MAX. 160 MM SHORT INFEED WITH 220MM TOP FEED ROLLERS BOTTOM 15KW 6,000 RPM, OUTBOARD BEARING, JOINTER READY RIGHT 11KW 6,000 RPM JOINTER READY LEFT 15KW 8,000 RPM JOINTER READY Fsdpfx Ajz N Sznsl Uogh RIGHT 11KW 8,000 RPM JOINTER READY LEFT 15KW 8,000 RPM, JOINTER READY TOP 18.5KW 6,000 RPM OUTBOARD BEARING, JOINTER READY BOTTOM 11 KW 6,000 RPM OUTBOARD BEARING, JOINTER READY (STRAIGHT JOINTER) + OUTBOARD BEARING TOP 18.5KW 8,000 RPM OUTBOARD BEARING, JOINTER READY (STRAIGHT JOINTER) + OUTBOARD BEARING BOTTOM 22 KW 6,000 RPM OUTBOARD BEARING, JOINTER READY 12X TOP FEED ROLLERS (2X 220MM + 10X 140MM) 7X BOTTOM FEED ROLLERS POSSIBLE TO ADD ADDITIONAL STRAIGHT / PROFILE JOINTERS AS NEEDED AUTOMATIC LUBRICATION SYSTEM FULL DOCUMENTATION INCLUDED MACHINE LENGTH 5.2M

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Working area X: 3855 mm Working area Y: 1650 mm Z-axis workpiece clearance: 245/290 mm 5-axis electrospindle, HSK F63 mounting Main electrospindle power: 16 kW Drilling spindles for vertical drilling: 5 Drilling spindles for horizontal drilling X: 2 Drilling spindles for horizontal drilling Y: 2 22-position chain-type tool changer Work table with 8 rails Automatic EPS tables Software: Biesse bSolid Vacuum pump with a capacity of 250 m3/h Chip conveyor belt Safety guards Safety device compliant with CE standards, with impact bar and double light curtain Fsdpfx Ajz Hxmqel Ujgh Approximate weight: 5800 kg Only 2774 operating hours Includes Uniclamps for window and door frames Available immediately

Condition: refurbished (used), Year of construction: 2000, functionality: fully functional, spindle diameter: 50 mm, type of input current: three-phase, input voltage: 400 V, number of spindles: 9, input frequency: 50 Hz, input current: 184 A, WEINIG Hydromat 23 - 9 heads, refurbished in 2020 Opre Annamária: Oh +36 20 949 4988: For sale: a WEINIG Hydromat 23, one of the most reliable machines for professional woodworking. The machine underwent a complete overhaul in 2020 at a German specialist service center and has been operating flawlessly ever since. Fgsdpfeztpgwsx Al Ueh Technical specifications: - 8 + 1 universal heads, total 74.5 kW (lower 11 kW, upper 11 kW, the remaining heads 7.5 kW, including one universal head) - Working width: 230 mm - Working height: 160 mm - Tool/spindle diameter: 50 mm - Year of manufacture: 2000, complete overhaul in 2020 at a German specialist service center The machine can be viewed and tested in operation by prior arrangement in Nagytarcsa, near Budapest, Hungary. Available as a separate option: with many planing heads, planing knives, accessories, and a dust extraction system. Price: 59,000 EUR

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, overall weight: 3,400 kg, year of last overhaul: 2023, CNC machining center – MASTER 23.M – year 2007 – operational, good condition, in continuous use. For sale: a MASTER 23.M CNC machining center from 2007. The machine is operational and in good technical condition, ready for further use. It can also be used for stone processing. Machine specifications: Manufacturer: MASTER Model: 23.M Type: CNC machining center Year of manufacture: 2007 Technical condition: good Fodpfxez E U N So Al Uogh Machine: operational, can be inspected while in operation Control: CNC Maximum working area: 2500mm x 1300mm, front can be opened Industrial construction, designed for professional machining Used machine, sold as seen in the pictures Technical condition The center is running and operational. The machine can be inspected by a prospective buyer before purchase. Please contact us for further information, photos, and to arrange a viewing and demonstration of the machine.

Condition: not inspected (used), Year of construction: 1993, Number of spindles 6 St. Working width 230 mm Working height 160 mm Feed motor 4 kW Dimensions (L/W/H) 4400 x 1800 x 1500 mm WEINIG Unimat 23 Automatic Planing and Grooving Machine For sale on behalf of a customer ----- Manufacturer’s Technical Specifications: Working width: 20–230 mm Working height: 6–160 mm Number of spindles: 6 Motor power per spindle: 5.5 kW (7.5 PS) Feed motor power: 4.0 kW (5.5 PS) Fsdpszz Ai Ujfx Al Uegh Spindle speed: 6,000 rpm ----- ----- Planing table length: 2 m 1 adjustment gauge 2 planing heads, 240 mm 3 brake units are defective; these could be reinstalled by an electrician. ----- Additional technical data (former order confirmation) attached ----- Price of the above-mentioned machine upon request! ----- (Technical specifications according to the manufacturer—not guaranteed!) All prices listed are net, plus applicable sales tax.

Condition: good (used), Year of construction: 1992, functionality: fully functional, workpiece length (max.): 3,200 mm, workpiece width (max.): 1,200 mm, workpiece height (max.): 80 mm, Equipment: documentation/manual, CNC milling machine Rover 342 with 1 milling motor, saw blade, and cross-drilling attachments is fully functional but has been disassembled by the seller from a closed-down factory. Fjdpfx Alezl Uaye Uegh

Condition: used, Year of construction: 2018, Materials for blister packaging: PVC + coated PVC, PETG + PETG, PET GAG + PETGAG, PS + Complex, operating mode: intermittent, max. output: 12cycles/min, forming film width: 180-350mm, max. forming film diameter: 400mm, max. forming film thickness: 500µm, film transport tolerance (motor): +/-0.2mm, forming area: 150-310x100-210mm, max. sealing pressure: 950kg, max. punching pressure: 10,000kg, max. forming depth: 60mm, sealing temperature: 80-200°C, vacuum pump power: 0.75kW, vacuum pump capacity: 20m³/h, forming heater power: 4.8kW, air consumption: 34m³/h, connected load: 13kW, length: 5530mm, width: 880mm, height: 1460mm, with documentation, Videojet 1520 continuous inkjet printer and Lauda Ultracool UC-0080 recirculating chiller. An on-site inspection is possible. Fgjdjz Agf Nepfx Al Ush

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Working area X: approx. 3765 mm Working area Y: approx. 1560 mm Working area Z: 170 mm 5-axis electrospindle, without drilling units Tool changer with approx. 16 positions Work table: Nesting table Software: bSolid 2 Busch MM 1322 vacuum pumps Automatic panel loading system Automatic panel unloading system with motorized transfer Protective screens Weight approx. 3700 kg. Available January 2027 Fgedpfxjzccfyj Al Ush

Condition: used, Year of construction: 2005, Second-hand machine Fgedpfjzk N S Uox Al Uoh Year of manufacture: 2005 Features and technical specifications: - Motor: 400 V, 50 Hz, 3-phase, 1.5 kW - Pneumatic single-head drilling machine with 23 spindles - Aluminium ruler with 4 stops (2 profiles on the right/left, 1500 mm each) - with quick-action chuck - 2 patented, accident-proof pressure clamping cylinders - Connection for extraction system in accordance with EC standards - Aluminium drilling beam, spindle centre distance 32 mm - Work table made of MDF and cast iron - Patented spiral system for fine adjustment of the drilling depth - Pneumatic drilling head oscillation with Lockable in any position between 0° and 90° - Fold-down side stops with fine adjustment via counters with decimal display - Drilling height adjustment via dial gauges with decimal display - Back stop, travel up to 300 mm - Fixed stops 37 mm for fitting pot-type band drills - Complies with EC standards - Max. drilling width 704 mm - Max. drilling depth 65 mm - Max. workpiece width 960 mm - Max. workpiece length 3000 mm - Max. workpiece thickness 60 mm Availability: at short notice Storage location: 63934 Röllbach

Year of construction: 1991, operating hours: 102,364 h, condition: good (used), This extrusion line from Hans Weber GmbH is in machine storage at Plastima Used Machinery. The line is from 1991 and is in used but good condition. Fsdpfxsqpft Is Al Uegh - Brand: Hans Weber GmbH - Model: WEBER DS 6.5 - Year of construction: 1991 - Screw Ø: 65 mm - Working hours: 102.364

Condition: excellent (used), functionality: fully functional, working width 230mm working height 160mm 5 spindles spindles set: bottom/right/left/top/bottom spindles diameter 40mm (last one 50mm) manual jointer on last head rolls in the table electric regulation of top head variable regulated feeder to 36m/min chrome table Fgjdpfez Dn T Iex Al Ueh pneumatic pressure of feeding rolls

Condition: excellent (used), functionality: fully functional, working width 230mm Fgodpfx Aljz Dn Swo Ush working height 120mm 5 heads heads set: bottom/right/left/top/bottom table lubrication pneumatic pressure of feeding rolls two axes heads regulation spindles speed 6000 RPM electric adjustment of pressure beam feeder with cardan variable regulated feeder solid silenced cabinet

Condition: used, Year of construction: 2013, power: 17.1 kW (23.25 HP), input voltage: 400 V, input current: 29 A, input frequency: 50 Hz, travel distance X-axis: 4,320 mm, travel distance Y-axis: 1,326 mm, travel distance Z-axis: 170 mm, number of axes: 5, number of slots in tool magazine: 33, Equipment: CE marking, Biesse Rover A 1343 CNC machining centre 5-Axis Description Rover A ATS CNC Machining Centers Working ranges X = 4,320 mm; Y = 1. 326 mm;Z = 170 mm Waste conveyor belt Automatic lubrication system Remote console 1 x 250 m3/h vacuum pump for standard system Auxiliary vacuum system for double working area machine Multi-zone 8 bars and 24 cups with automatic positioning (ATS-EPS X-Y) 8 reference stops with 115 mm rear stroke 8 front reference stops with 140 mm stroke positioned at a height of 1190 mm from the rear stops 4 side stops, with 140 mm stroke (2 right + 2 left) with implant 2 additional side stops, with 140 mm stroke (1 right + 1 left) Pneumatic system for panel lift Fgsdpfx Aloy U Naij Ueh Coolant control unit to replace the heat exchanger supplied with 13kW 5-axis units. Operating unit 5 interpolating axes 13 kW (17.4 Hp), HSK F63 connection, liquid-cooled. BiesseWorks Advanced Machine Chain tool magazine with 33 places - centre distance 120 mm (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland