Used Rover 23 for sale (4,784)

Condition: ready for operation (used), Number of spindles 6 St. Working width 230 mm Working height 120 mm Length of the planing table 2000 mm Feed motor 4 kW Feed speed 5-24 m/min. WEINIG Unimat 23 E Planer and moulder ----- 6 spindles (with 2 rigth spindles, reinforced motors, 8,000 rpm, ATS control Machine will be cleaned and functionally checked before delivery Working width 20 - 230 mm Working height 8 - 120 mm 1st spindle (bottom) 5.5 kW (motor replaced) ----- Diameter 40 mm Speed ??6,000 rpm Tool swing diameter 125 - 180 mm Rebating unit including tool Hardened table insert in front of 1st (bottom) spindle 2nd spindle (right) 12.1 kW (motor replaced) ----- Shared motor with left vertical spindle Diameter 40 mm Speed ??8,000 rpm Tool swing diameter 112-250 mm Max. Tool diameter behind stop plane 203 mm Max. groove depth 35 mm Axially travel 80 mm 3. Spindle, left ----- Shared motor with 2nd spindle Diameter 40 mm Speed ??8,000 RPM Tool swing diameter 112-200 mm Max. groove depth 35 mm Axially travel 80 mm Pressure shoe in front of left spindle, including spring-loaded lateral roller pressure 4. Spindle, right 8.3 kW (motor replaced) ----- Diameter 40 mm Speed ??8,000 RPM Tool swing diameter 112-250 mm Max. tool diameter behind stop plane 203 mm Max. groove depth 35 mm Axially travel 80 mm 5. Spindle, top 7.5 kW ----- Diameter 40 mm Speed ??8,000 rpm Tool travel 112-200 mm Max. groove depth 35 mm Axially travel 45 mm Split pressure shoe in front of upper spindle, adjustable to the tool travel and pivoting away from the tool, spring-loaded. 6. Lower spindle 4.0 kW ----- Diameter 40 mm Speed ??6,000 rpm Tool travel 112-250 mm Max. groove depth 15 mm Axially travel 45 mm Gksdpfxjxz Hh Uj Af Aea Spindles in general ----- All groove spindles with high concentricity. Lubrication points for the axial spindle movement. Feed system ----- Motor with mechanical brake, 4 kW Mechanical feed infinitely variable 5-24 m/min. Feed roller in front of the first lower tool pneumatically controlled up/down, Durofer pointed tooth rollers (Weinig patent) with depth limiter and self-cleaning Adjustment travel of the feed rollers relative to the left spindle, axial 35 mm Machine electrical system ----- Operating voltage 440 V (voltage range 380 - 420 V), 50 Hz. Machine frame, tables and stops ----- Infeed table 2.0 m long (incl. jointing guide) Manual Waxilit pump for table de-resin removal One driven rubber roller (spring-loaded in the outfeed table) Two driven rollers in the machine table, hardened Machine operation ----- Pressure shoe in front of the upper spindle with mechanical digital display. Extraction after the upper spindle with mechanical digital display. ATS/System, automatic 2-axis positioning for spindles 3 and 5 Minimum working height 12 mm Electric height adjustment of the upper spindles and the feed Central lubrication points on the front of the machine Electronic digital displays on spindles 3 and 5 (axial), spindle 6 (radial) and spindle 4 (axial and radial) Safety and noise reduction ----- Full safety enclosure Easily hinged safety hood with window. Covers the ent...

Condition: excellent (used), Year of construction: 2006, machine/vehicle number: 78587, functionality: fully functional, operating hours: 25,920 h, Biesse CNC-controlled machining center, type Rover C 6.50 CONF3 Working area: X-axis 4600 mm, Y-axis 1535 mm Z-axis 275 mm 5-axis controlled Spindle speed: 1000-20000 rpm Tool changer system with 22 positions Tool holder: HSK F63 Equipped with pneumatic material clamping devices Vacuum pumps Weight: approximately 7 tons Gedpfx Afjzkrlqj Aoka Includes software and dongle.

Condition: used, machine/vehicle number: 008689, X axis working area: 6735 mm Y axis working area: 1650 mm Working Table: Pod and Rail Gjdpfx Afsznuxbj Ajka Main Electrospindle power: 13.2 KW Number of controlled axes: 4 axes Maximum edge height: 65 mm Total number of drilling spindles: 30 Total number of tool changer positions: 22

Condition: like new (used), “Pallmann PHPH 16-23 Grizzly” for Sale Also many other manufacturer like: Sandvik-Aubema / Hazemag / Ammann Amaro. Find our complete stock on our website. Manufacturer: Pallmann Type: PHPH 16-23 Grizzly Gsdpfx Afeggflyo Aeka Rotor Dia.: 1.600mm Rotor Width: 2.300mm Electrical Motor: Included Included frame and feeders.

Condition: excellent (used), Double-side Sizing & Edge Banding - Independent Machine (1st &/or 2nd in a line) Edges (tape) thickness in rolls (min/max) mm 0,3 - 3 Edges thickness in stips / lippings (min/max) mm 0,4 - 12 Panels thickness (min/max) mm 8 - 100 Working width (min/max) mm 240 - 3000 Numerical Control Power Control PC22 (Windows XP) Software woodCommander Adjustable feeding speed (m/min) 10 - 40 Gedpjtt Iudjfx Af Ajka Safety and sound-proof enclosures/cabins Distance (center-axes) of the Disappearing Dogs (mm) 400 SIZING PART (for each side): Pre-Milling unit (2 x Kw 6,6) Free place LEFT SIDE only: 2 x Milling grooving rotating unit (2 x KW 6,6) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) E34 Pressing rollers (revolver) both for straight and shaped edges (softforming) GL sextuple Edge coils supporting unit (No. of reels) 1 Snipping (end-cutting) Unit WK14 (2 x 0,8 KW) 25 m/min (0°-30°) Fine Trimming Unit (2 x 0,55 KW) 0°-30° Corner-rounding unit FF12 (4 motors) WD70 20 m/min Profile edge scraping unit PN20 Finish processing unit (Glue scraper + Buffing unit) FA 11

Condition: reconditioned (used), Number of spindles 6 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 3 kW Feed speed 5-24 m/min. total power requirement 27 kw Dimensions (L/W/H) 3900 x 2200 x 2000 mm weight of the machine ca. 2500 kg Weinig Profimat 23 four-side planer, window version with glazing bead removal or can be used as a grooving spindle ATS control and program control ----- Machine was factory overhauled by Weinig in 2024. Technical Specifications Summary (Please inquire about any additional accessories included) ----- General ----- > Working width: 230 mm > Working height: 120 mm > Number of spindles: 6 > Planer table length: 2500 mm > Feed motor: 3 kW > Feed speed: 5-24 m/min > Total power requirement: 27 kW > Dimensions: 3900 x 2200 x 2000 mm > Machine weight, approx.: 2500 kg Spindle arrangement ----- > Spindle 1: bottom > Spindle 2: right, pneumatically timed up-down > Spindle 3: left > Spindle 4: top > Spindle 5: bottom > Spindle 6: pneumatically timed up-down glazing bead saw Spindle Description ----- > Spindle 1: 4 kW, 6000 rpm, 40 mm diameter > Spindle 2: 7.5 kW, 6000 rpm, 40 mm diameter > Spindle 3: 6000 rpm, 40 mm diameter > Spindle 4: 5.5 kW, 6000 rpm, 40 mm diameter > Spindle 5: 4 kW, 6000 rpm, 40 mm diameter Gkedpfxoxpn T Ue Af Aja > Spindle 6: glazing bead saw 2.2 kW, 6000 rpm, 40 mm diameter Additional Features ----- > Can be used for glazing bead cutting or as a grooving machine > ATS control, automatic 2-axis positioning for width and height (left and upper spindle) with 99-program memory > Machine operation: Window package Joint control of the right spindle and the glazing bead feed via manual selector switch on the control panel > Spindles with mechanical digital display (Technical data according to the manufacturer - no guarantee!)

Condition: reconditioned (used), Working width 230 mm Working height 15-120 mm Number of spindles 2 St. Weinig Hydro Planer Type Uniplan 23 ----- Machine was factory overhauled by Weinig in 2024. Description: For two-sided horizontal woodworking with two working spindles. Spindle arrangement: horizontal, bottom and top. The two horizontal spindles are equipped with hydraulically tensioned counterbearings without axial adjustment. Built-in straight jointers on both spindles with automatic stone feed, remotely controlled with the hood closed. Machine with continuous, chainless feed, equipped with rubber rollers. Electric up/down adjustment of the spindles according to a mechanical digital display (SIKO). On/off switch for limiting the up/down adjustment. Feed roller pressure pneumatic. Stops and table tops are not adjustable. Machine with steel table tops. Machine with full enclosure and integrated sound and dust protection including interior lighting. Electrical design according to DIN VDE 0113, electrical equipment of industrial machines EN 60204, IEC - 204 - 1. Other electrical regulations are not taken into account. Gksdoxpn Tzopfx Af Asa Machine includes operating tools, but does not include machining tools. The Weinig Uniplan spindles operate at a speed of 7200 revolutions per minute. Before using existing tools, please check that they are suitable for the speed. Please also consider this when ordering new tools. Technical specifications Max. working width: 230 mm Min. working height: 15 mm, max.: 120 mm Feed: 3 kW (4 HP) Horizontal spindles each: 7.5 kW (7.5 HP) Infinitely variable feed speed: 6 - 36 m/min. Spindle speed: 7,200 rpm Spindle diameter: 50 mm Tool clamping length: 240 mm Maximum tool radius: 163 mm Fixed clamping clearance at bottom: 0.5 mm (Technical data according to the manufacturer - no guarantee!)

Condition: used, Year of construction: 2019, Numerical control with bSolid software The multi-document software application in Windows environment allows the design of the finished product, the definition of its processes, the definition of the work plan, the simulation of the piece machining operations on the 3D model of the machine and generation of the necessary machine programs. bSolid - 3-Axis Machining bSolid - 5-Axis Machining Module for surface machining with 5-axis units and interpolation movements on all 5 available axes (X,Y,Z,C,B). The module includes the following commands: · assignment to surfaces three-dimensional roughing and finishing operations · spread or project a path onto a curved surface machining lying on a plane · follow 2D or 3D curves with any type of tool bSolid - 3D Engraving bSolid - Import external formats Fields of work: X = 5055 mm; Y = 1650 mm (may vary depending on configuration) Z = 200 mm with modules H=74 mm Z = 245 mm with modules H=29 mm Loadable piece in Y: * 1650 mm, with thickness up to 60 mm on H=74 mm modules * 1600 mm, with thickness over 60 mm on H=74 mm modules. 10 ATS floors – 40 trolleys The code includes: • 2 aluminium bars (n. 1 left and n. 1 right) on which the lateral stops slide. • 10 aluminum worktops. The worktops slide on hardened and ground linear guides using recirculating ball bearing slides. Locking occurs on both linear guides, front and rear, by means of four pneumatic cylinders. The control is activated by a button located in front of the work surface. The carriages slide on steel guides positioned above the extrusion. Pneumatic locking system divided into 2 locking zones in X Automatic positioning (EPS) for worktops. "EPS" (Electronic Positioning System) device for the automatic positioning by NC of the work surfaces and trolleys complete with locking devices capable of eliminate possible operator errors. Rear row stop, with 140 mm stroke Intermediate row stop, positioned at 405 mm, with 140 mm stroke. Front row stop, positioned at 1460 mm, with 140 mm stroke 4 lateral stops, with 140 mm stroke (2 right + 2 left) with system 2 additional side stops, with 140 mm stroke (1 right + 1 left). Sensor for checking whether the stops have descended 12 clamping devices for clamping narrow workpieces 6 loading aid bar lifts, for H=74 mm modules Configuration 5A, for Rover B. Configuration for high productivity and flexibility, thanks to the two operating groups 4 and 5 axes and the possibility of performing tool changes in concurrent time. It includes the axes and carriages for the movement of the main operating groups. Includes 2 inverters. Second Y-axis. Introduces the separation of the front and rear Y-carriages, with independent motorization. The two Y-carts have a maximum speed of 118 m/min. 13.2 kW (17.7 HP) electrospindle, HSK F63 connection, air-cooled. Main features: • 11 kW (14.7 HP) from 12,000 to 15,000 rpm in S1 service. • 13.2 kW (17.7 HP) from 12,000 to 15,000 rpm in S6 service. • Bearings ceramics. • Right and left rotation. • Rotation speed from 1,000 to 24,000 rpm programmable by NC. • The release pneumatic operation is carried out via a prismatic linear guide and recirculating ball bearings. A cover is included for chip extraction, with 6 different positions in Z managed by the NC, depending on the length of the tool, or by program. The suction mouth is automatically closed when the electrospindle is not working. Provision for subsequent installation of the 360° operating group (C-axis) Revolver tool maga... Gkedpjw D E A Esfx Af Aea

Condition: used, Year of construction: 2009, Biesse Works Control Working range on X axis mm 3500 Working range on Y axis mm 1585 Working stroke in Z axis mm 350 N ° 2 work fields Bar worktop No. 8 adjustable bars N° 4 pneumatic Bakelite bars for lifting the panel No. 3 adjustable suction cups for each bar with vacuum seal for fixing the panel during processing No. 1 4-axis vertical electrospindle (Vektor), with automatic tool change, HSK type cones 10-position rotary tool change system on the operating head 24-position chain tool change system - located on the rear of the chain machine Drilling head with vertical and horizontal spindles composed as follows: n. 12 vertical spindles in X n. 12 vertical spindles in Y n. 6 horizontal spindles in X n. 4 horizontal spindles in Y n. 1 independent blade for making X-grooves Front protection and safety system with carpets Perimeter protection grids Chip evacuation system with motorized belt Air conditioning system for cooling and cleaning of machine control Vacuum pump 250mc/h TECHNICAL DETAILS TO BE CHECKED Gedsw D Dhaopfx Af Aeka

Year of construction: 2012, condition: like new (used), functionality: fully functional, machine/vehicle number: 1012331637, Precision Vee-cuts in aluminium and PVC profiles Gkedpfx Afszrcfqs Aea Pneumatic continuously adjustable saw blade feed for fast and precise sawing with rapid return Simple setting of cutting depth Equipped with connection for swarf extraction hose and swarf container as standard Equipped with pulsed coolant system Cutting range for Vee-cuts: cutting depth 60 mm, profile height 100 mm Saw blade diameter 254 mm Saw blade speed 2,800 rpm Power supply 230/400 V, 3~, 50 Hz Power output per motor 0.9 kW Compressed air supply 7 bar Air consumption per working cycle 20 l without spraying, 44 l with spraying Length 980 mm, depth 800 mm, height 1,650 mm, weight 240 kg

Condition: used, Year of construction: 2007, operating hours: 3,415 h, fuel type: diesel, color: other, GVW: 3.040 kg Dimensions (LxBxH): 620 x 98 x 197 cm Gksdpfx Aszpw Diof Asa Make of engine: Kubota Mast: articulated arm Lifting capacity: 200 kg Working height: 2.300 cm CE mark: yes Technical condition: good Teupen Leo 23 GT Spider Lift Year of construction: 2007 Hours: 3415 h Engine: Kubota Diesel Weight: 3040 kg Working height: 23 m Lateral reach: 11.2 meters Lifting capacity: 200 kg CE certified

Condition: used, mileage: 115,600 km, power: 232 kW (315.43 HP), first registration: 08/2019, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 07/2027, gearing type: semi-automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, 1382 operating hours, 6/26, left-hand drive, differential lock, steered/liftable trailing axle, parking brake for waste collection vehicle, 3-seater, ASR, ADR, central locking, speed limiter 30/85 km/h, radio, rotating beacons, pop-up roof, decorative trim, armrests, sun visor, turning lights, daytime running lights, LED position lights, emergency brake signal (ESS), Brake Assist 2, Lane-Guard System 4, turning assistant. HS Olympus Industrial 23 m³ with HS tilting body, Comfortlift type U-K-KL EuroMax, suitable for 80 l to 5 m³, bulky waste collection with folding slide, comfort gearshift, central lubrication system. The tipping body lifts approximately 2 tons, Welvaarts scale. Gedpfx Afjwcikqe Aska

Condition: used, mileage: 80,365 km, power: 316 kW (429.64 HP), first registration: 12/2021, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 09/2026, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, Exhaust with ground outlet, rear axle differential lock, multifunction steering wheel, emergency brake, sun visor, driver's air comfort seat, LED daytime running lights, perimeter/beacon lights, RIO Box, Truck Advanced radio with 7'' display including Europe navigation, Lane Guard, air pressure assist, Luis turning assistant HS Olympus Industrial 23 m³ with HS rear loader tipping system Comfortlift type U-K-KL EuroMax, suitable from 80 l to 5 m³, bulky waste collection with folding chute, comfort gearshift, centralized lubrication system. Tipping system lifts approx. 2 t, Welvaarts scale. Gkodpforgmm Uex Af Asa

Condition: used, mileage: 498,040 km, power: 382 kW (519.37 HP), first registration: 11/2022, fuel type: diesel, overall weight: 18,000 kg, tire size: 385/65/22.5, axle configuration: 4x2, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of beds: 2, front tire size: 385/65/22.5, rear tire size: 315/70/22.5, number of seats: 2, Equipment: ABS, air conditioning, cabin, cruise control, differential lock, electronic stability program (ESP), low noise, onboard computer, parking heater, soot filter, traction control, Renault T High 520 Hi-Sleeper DTI 13 VIN: PD - Automatic transmission - Retarder - Alloy wheels - Differential lock - Leaf/air suspension - Air conditioning - Auxiliary heater - Refrigerator box - 2 beds - Adaptive cruise control - Lane keeping assist - Electric exterior mirrors + power windows - Fog lights - EURO 6 - Full spoiler - Aluminum fuel tanks x 2 Godpfx Ajzp Rrmef Aeka - Tires: 385/55R22.5 - 315/70R22.5 In very good condition! Export price! Yourtrucks Group The Yourtrucks Group maintains business relationships worldwide. Both purchasing and sales extend beyond national borders, which is why our advertisements always include the export price, as this is independent of the intended location of use. Yourtrucks GmbH compiles the content of this website with the utmost care and ensures that it is regularly updated. This information should be regarded as non-binding general information and does not replace detailed individual advice when making a purchase decision. Only the provisions contained in the purchase contract are binding. Subject to change, errors, typos and prior sale. Our general terms and conditions apply exclusively. Languages: - We speak English - On parle français - Мы говорим по-русски - Mówimy po polsku - Hablamos español - Falamos português - Parliamo italiano

Condition: used, Year of construction: 2005, Second-hand machine Year of manufacture: 2005 Features and technical specifications: - Motor: 400 V, 50 Hz, 3-phase, 1.5 kW - Pneumatic single-head drilling machine with 23 spindles - Aluminium ruler with 4 stops (2 profiles on the right/left, 1500 mm each) - with quick-action chuck - 2 patented, accident-proof pressure clamping cylinders Gkjdozk N S Uopfx Af Aea - Connection for extraction system in accordance with EC standards - Aluminium drilling beam, spindle centre distance 32 mm - Work table made of MDF and cast iron - Patented spiral system for fine adjustment of the drilling depth - Pneumatic drilling head oscillation with Lockable in any position between 0° and 90° - Fold-down side stops with fine adjustment via counters with decimal display - Drilling height adjustment via dial gauges with decimal display - Back stop, travel up to 300 mm - Fixed stops 37 mm for fitting pot-type band drills - Complies with EC standards - Max. drilling width 704 mm - Max. drilling depth 65 mm - Max. workpiece width 960 mm - Max. workpiece length 3000 mm - Max. workpiece thickness 60 mm Availability: at short notice Storage location: 63934 Röllbach

Condition: used, Second-hand machine Features and technical specifications: - Universal dowel drilling machine for horizontal and vertical drilling - Working width 720 mm - with drilling beam, drive motor 3 PS, 2800 rpm - 23 drilling spindles, drilling pitch 32 mm - Pneumatic workpiece clamping via foot valve - 2 stop rails, 1000 mm Gkedpfx Ajzk N Atsf Aea - with chassis Availability: at short notice Storage location: 63934 Röllbach

Condition: new, power: 125 kW (169.95 HP), fuel type: diesel, gearing type: automatic, color: white, number of seats: 23, Year of construction: 2026, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, 517 Sprinter Lord Comfort Lead Vehicle. Equipped with GSR3 system. Base vehicle: - 125 kW Euro 6e engine - 9-speed automatic transmission - Front air conditioning - Auxiliary heater - Driver's comfort seat with seat heating - Roof-mounted spotlights - Driver comfort package - Length 7336 mm - Rear-view camera and PDC front and rear (parking package) with front camera - Blind Spot Assist - Turning Assist - MBUX 10-inch (radio with Bluetooth, Apple CarPlay, touchscreen) - Tire pressure sensors - Attention Assist Gksdjzqy Dzjpfx Af Asa - Active Lane Keeping Assist - Traffic Sign Assist - Intelligent Speed Assist - Distance Assist - Rain sensor - Electric exterior mirrors - Cruise control Conversion: - Thermal and acoustic insulation - Rear extension by 500 mm, resulting in a total length of 7886 mm - Electric exterior swing door with recessed entry - 22 + 1 + 1 passenger seats / reclining seats - Total capacity 22 + tour guide + driver + optional reduction to 19 + 1 - Half podium - Recessed luggage compartment - Black VIP tinted windows (double glazing) - Convector heating in the passenger compartment - Roof hatch - Simple luggage rack on the left and right - USB ports at each row of seats - Webasto air conditioning in the passenger compartment (second compressor) - Interior lighting in the passenger compartment, white / orange - Curtains - Additional components painted in vehicle color Net export possible.

Condition: new, Year of construction: 2026, Pitch 32 mm Working width 704 mm Boring depth max. 70 mm Motor output 1,5 kW Gsdpsy Ehzgjfx Af Aeka Weight 310 kg Number of boring spindles 23 St.

Condition: used, number of spindles 4 bore capacity in steel (diameter) 23 mm bore stroke 150 mm Gsdpfxjt Hw U Ns Af Aska total power requirement kW weight of the machine ca. t dimensions of the machine ca. m

Condition: used, mileage: 91,498 km, power: 206 kW (280.08 HP), first registration: 12/2006, fuel type: diesel, overall weight: 15,000 kg, axle configuration: 2 axles, brakes: retarder, color: red, gearing type: automatic, emission class: euro4, total length: 10,000 mm, total width: 2,500 mm, total height: 3,240 mm, Year of construction: 2006, Equipment: ABS, air conditioning, compressor, MAN LE 15.280 with METZ DLK 23-12 L32 CAN aerial ladder, in ready-to-use condition. ----Equipment of the base vehicle: * Air conditioning * Suspension type: leaf spring/leaf spring * Wheelbase 4575 mm * Permissible total weight 15 t * Automatic transmission ZF 5 HP 590 with retarder * Fuel tank 125l, right side * Adjustable steering wheel * Axle ratio i = 4.62 * Differential lock in rear axle * Medium-length cab * Driver's comfort seat with lumbar support - Manufacturer: GRAMMER * Co-driver's seat Manufacturer: GRAMMER * Exhaust pipe for fire department * Quick-start system * Anti-lock braking system (ABS) * Traction control system * Disc brake for front axle * Armrests on both doors * Additional high and low beam headlights * Hour meter * Cruise control * Radio MAN CD 24V * Stabilizers front and rear axle * Headrests for driver and co-driver * Cab rear wall with 2 narrow windows, left and right * Heated and electrically adjustable rearview mirror * Wide-angle mirror, left and right, heated * Curb mirror, right, heated and electrically adjustable * Electric windows, left and right * 4-wheel parking brake * Tire chains on the rear axle * Winter tires Conti Scandinavia Equipment of the aerial ladder superstructure: * Superstructure: Metz aerial ladder DLK 23-12 L32 CAN with rescue platform (rescue height approx. 30.75m) Max. swiveling angle: 75 degrees, Max. platform load capacity: 270kg, Nominal rescue height: 23m, Nominal outreach: 12m, Outrigger support: horizontal-vertical, Outrigger width variable between 2,400mm and 4,500mm * 2014.9 operating hours * LED spotlights on the ladder for area lighting * Special warning light system * Front warning lights * Original Martin horn system (4-funnel). * Stretcher storage for accommodating a DIN stretcher, including conversion for accommodating a rescue litter, load capacity up to 150 kg * Fixed 230V power supply to the rescue platform, 2 Schuko sockets in the rescue platform * Fixed water supply in the upper part of the ladder with valve and B-Storz couplings * 3 securing points in the rescue platform for securing the crew * Load ring on the lower ladder, loadable up to 4000kg * Load ring on the boom segment (between ladder tip and rescue platform) for attaching a rappelling device, 270kg/400kg payload * LED ambient lighting on the undercarriage * XXL platform on the turntable for accommodating a DIN generator, ventilation unit, traffic cones, spare canister, rescue litter, and extension pipe * LED floodlight bar on the lower ladder, approx. 8282 lumens * 2 x adjustable LED spotlights at the end of the lower ladder, 2880 lumens each, operable from the main control panel * LED spotlights left and right on the rescue platform, 1800 lumens each * 2 LED floodlight bars on swivel arms, left and right on the rescue platform, 3105 lumens each (as a replacement for 1000 watt halogen spotlights) * Complete service booklet available, all maintenance performed annually ----Immediately ready-to-use vehicle in well-maintained condition, inside and out! Non-smoking vehicle! Your contact person for this vehicle: ---- Daniel Seidler Tel: Mobile: also WhatsApp Email: Subject to changes, prior sale and errors! Gkodjxafw Sepfx Af Aja

Condition: used, mileage: 85,528 km, power: 206 kW (280.08 HP), first registration: 12/2004, fuel type: diesel, overall weight: 15,000 kg, axle configuration: 2 axles, brakes: retarder, color: red, gearing type: automatic, emission class: euro3, total width: 2,500 mm, total height: 3,290 mm, Year of construction: 2004, Equipment: ABS, compressor, MAN LE 15.280 with METZ DLK 23-12 PLC 3.2 L32 aerial ladder, in immediately operational condition. ----Equipment of the base vehicle: * Suspension type: leaf spring/leaf spring * Wheelbase: 4575 mm * Permissible gross weight: 15 tons * Automatic transmission ZF 5 HP 590 with retarder * Fuel tank: 125 liters, right side * Adjustable steering wheel * Axle ratio i = 4.62 * Differential lock in rear axle * Cab: medium length * Driver's comfort seat with lumbar support - manufacturer: GRAMMER * Passenger seat - manufacturer: GRAMMER * Exhaust pipe for fire department * Quick start system * Anti-lock braking system (ABS) * Traction control system * Disc brake for front axle * Armrests on both doors * Additional long-range and fog lights * Hour meter * Cruise control * Radio MAN CD 24V * Stabilizers for front and rear axle * Headrests for driver and passenger * Cab rear wall with 2 narrow windows, left and right * Heated and electrically adjustable rearview mirrors * Wide-angle mirrors, left and right, heated * Curb mirror, right, heated and electrically adjustable * Electric windows, left and right * 4-wheel parking brake * Snow chains on the rear axle * Winter tires Equipment of the aerial ladder superstructure: * Superstructure: Metz aerial ladder DLK 23-12 L32 CAN with rescue platform (rescue height approx. 30.75m) Max. outrigger angle: 75 degrees, max. platform load capacity: 270kg, nominal rescue height: 23m, nominal outreach: 12m, outriggers: horizontal-vertical, variable outrigger width between 2,400mm and 4,500mm * Special signal system * Front flashing light * Siren * Stretcher storage for accommodating a DIN stretcher, including conversion for accommodating a rescue sled, load capacity up to 150 kg * Permanently installed 230V power supply to the rescue platform, 2 Schuko sockets in the rescue platform * Permanently installed water supply line in the upper part of the ladder with slide valve and B-Storz couplings * 3 anchor points in the rescue platform for securing the platform crew * Load eye on the lower ladder, loadable with up to 4,000 kg * Load eye on the boom segment (between ladder tip and rescue platform) for attaching a lowering device, 270kg/400kg payload * LED ambient lighting on the undercarriage * XXL platform on the turntable for accommodating a DIN generator, ventilation unit, traffic cones, etc. * 2 adjustable spotlights at the end of the lower ladder, operable from the main control panel Gksdexa Sbqspfx Af Aea * Complete service history available, all maintenance performed annually. Upon request and for an additional charge, a new 20-year service including hose replacement and inspection is possible! ----Immediately operational vehicle in well-maintained condition, both inside and out! Non-smoking vehicle! Your contact person for this vehicle: ---- Daniel Seidler Tel: Mobile: also Whatsapp Email: Subject to changes, prior sale and errors!

Condition: like new (used), functionality: fully functional, Ferwood code: RS0003547 - Manufacturer code: 3-008-23-1410 - Condition: As new (display item) - Functionality: Fully functional - Compatible machine: - If interested, we offer an overhaul service, contact us. 4KG 46X39X27 Gjdpfx Asyrn I Eef Aska

Condition: used, Ferwood Code: RU0000986 - Condition: Used - Compatible Machine: CNC BIESSE ROVER - If interested we offer a revision service, contact us. Gjdevazkfepfx Af Aeka

Condition: excellent (used), planing width 230mm feed on gimbals (7.5 kW) 10 heads: 1 bottom 7,5 kW 2 right 7,5 kW 3 left 7,5 kW 4 right 7.5 kW 5 left 7.5 kW Gkodpjuldn Hjfx Af Aja 6 top 7.5 kW 7 bottom 7.5 kW 8 top 7.5 kW 9 bottom 7.5 kW 10 universal 4 kW

Condition: excellent (used), CATALOG NUMBER 7651 Technical data: - Track width: 250mm - Shaft width: 250mm - Max saw blade diameter: 400mm - Saw blade bore diameter: 70mm - Max cutting height: 120mm - Table width with opening: 810mm - Table length: 1780mm – From above: - Pawls/kickers - Smooth pressure shaft - Pawls - Smooth pressure shaft - Shaft with saw blades - Smooth pressure shafts, 2 pcs – From below: - Guide - Pawls/kickers - Track - Central lubrication Gkjdpezkidksfx Af Asa - Stepless feed speed adjustment - Feed motor 1.1kW - Main motor 37kW - Manual body lifting - Manual lifting of shaft with saw blades - Chip extraction connection diameter: 200mm - Overall dimensions (L/W/H): 2150x1480x1760mm - Weight: 1735kg ADVANTAGES – German-made – Stepless feed speed adjustment – Multi-blade saw, used, in very good condition Net price: 46,900 PLN Net price: 11,160 EUR (at a rate of 4.25 EUR) (Prices may change depending on exchange rate fluctuations)