Used Kimera S430 for sale (27)

Condition: excellent (used), functionality: fully functional, overall weight: 1,400 kg, Year of construction: 2016, operating hours: 360 h, KIMERA SRL KM 0010 Small MULTIMIX / Concrete Mixer / Large Version • Manufacturer: KIMERA SRL • Model: KM 0010 Small MULTIMIX • Year of manufacture: 2016 • 360 operating hours • Maximum production output: 25 m³/h • Maximum batch size per cycle: 4 m³/h • Large configuration • Mobile concrete batching plant • Mobile complete system – ideal for transport by truck or trailer • Immediately ready for operation – no foundation required • Independent control unit with operator panel, USB port, start/stop/emergency stop • Premium grid covers & conveyor technology for material loading and mixing process • Safe and robust construction for jobsite environments • Suitable for dry and wet mix production directly at the jobsite • Efficient & precise – saves material and time through inline dosing • Total weight: 1,400 kg • Length: 600 cm • Width: 300 cm • Height: 300 cm • German machine • Immediately operational • This offer is non-binding and subject to change. Iijdpfx Aeyxqf Ijbgsa - Prior sale reserved, - Errors and/or typographical mistakes excepted. - Sale subject to our General Terms and Conditions.

Condition: like new (used), functionality: fully functional, fuel type: diesel, overall weight: 32,000 kg, Year of construction: 2013, operating hours: 39 h, machine/vehicle number: UTZK55004999, Kimera K55 Mobile concrete batching plant for sale in new condition! Ijdpfoyf Ehvex Abgjia Specs: - Hourly nominal production: 55 m3/h - Nominal production fully loaded: 9 m3 - Aggregates hopper capacity: 10,5 m3 - Cement silo capacity: 3000 kg - Water tanks capacity: 2400 L Year: 2013 Operating hours: 39 - It's in NEW CONDITION! Place: Hungary If you have any questions, feel free to ask.

Condition: good (used), functionality: fully functional, Year of construction: 1990, Used Safan guillotine shear with discharge unit Type VS 430 3 Capacity: 4300 x 3 mm Electrically adjustable back gauge Manually adjustable cutting angle and blade gap Ijdpfjyzgdrox Abgeia Equipped with lift/discharge device at the rear

Condition: good (used), Year of construction: 1984, SAC used jointer planer SAC FS 430 - 430 mm planing width - 2.90 m table length - 120 mm cutterhead with 4-knife strip knives - 3 kW, 380 volt motor - Automatic motor brake - 8 mm depth of cut Ijdpfex Nrvvjx Abgjia - Fence tiltable up to 45° - Swing-away Aigner auxiliary fence - Bridge-type knife guard (cutter cover) - Low-noise design with serrated steel table lips - Extraction port - Weight: approx. 650 kg Location: at customer site - immediately available - Subject to prior sale

Condition: excellent (used), Surface planer Brake motor Undervoltage release Emergency stop NEW motor Various NEW switches CE compliant Total table length: 2900 mm Infeed table length: 1550 mm Outfeed table length: 1310 mm Working width: 430 mm Working height: 800 mm Cutterblock diameter: 120 mm Isdpfxsyrflnj Abgeia Cutterblock speed: 5000 rpm Number of knives: 4 Knife dimensions: 430 × 35 × 3 mm Rabbeting depth: 20 mm Planer fence L × H = 1000 × 180 mm Fence tiltable up to 45 degrees Motor power: 3.2 kW, 400 V, 50 Hz Dimensions L × W × H: 2900 × 700 × 960 mm Weight: 475 kg

Condition: ready for operation (used), working width: 3000 mm metal sheet thickness: 4 mm throat: 100 mm rear stop: 500 mm power: 380 V, 7,5 kW space needed: 3400 x 1600 x 1700 mm Iiedpfx Abjh D E Hhsgoa weight: 4500 kg

Condition: excellent (used), working width 430mm 4-knives shaft fence with angle regulation tables length 2080mm delta/star start manual regulation of thicknesser table two feeding speed horizontal drill Isdpfow Ad N Ijx Abgoia

Condition: good (used), functionality: fully functional, Year of construction: 1990, Used 4-meter Safan guillotine shear Type: VS 430 3 Capacity: 4300 x 3 mm Electric back gauge Output stacking system with stacker and high support table Iodeyu Ig Hspfx Abgoia Year of manufacture: 1990

Condition: used, Year of construction: 2015, x-travel 560 mm y-travel 430 mm z-travel 510 mm control Mazatrol Smart table surface area 900 x 430 mm max. table load 500 kg number of spindle speeds 40-12000 U/min rapid speed 42000 mm/min tool magazine with 30 Plätzen max. tool diameter 125 mm weight of the machine ca. 4800 kg Just 4,362 hours of pure machining! Capacity: External dimensions of the machine table: 900 x 430 mm Travel range X/Y/Z axis: 560/430/510 mm Distance from spindle head to table surface: Min: 150 mm Max. 660 mm Spindle: Spindle speed: 40-12000 (two electrical stages) Feed rate: Rapid traverse speed: 42000 mm/min Cutting feed rate: 1-8000 rpm ATC magazine: Tool magazine slots: 30 Tool shank type: MAS BT-40 Max. tool diameter: with adjacent tools: 80 mm without adjacent tools: 125 mm Max. total weight of tools in magazine: 120 kg Equipment/accessories: Ijdpfx Aeyukgiobgoia Coolant system Vices (not shown in the photo) Tool holders Tools Documentation

Condition: ready for operation (used), Year of construction: 2011, travel distance X-axis: 900 mm, travel distance Y-axis: 430 mm, controller manufacturer: MAZATROL, controller model: Smart, spindle speed (max.): 12,000 rpm, spindle motor power: 18,500 W, number of axes: 3, This 3s Mazak VCS 430A vertical machining centre was manufactured in 2011. It features a powerful 18.5 kW spindle with a speed of 12,000 rpm and a table size of 900 x 430 mm. The machine offers rapid traverse of 42 m/min and includes a high-pressure coolant system, synchronized tapping, and tool length measurement. If you are looking to get high-quality machining capabilities, consider the Mazak VCS 430A machine we have for sale. Contact us for further details. • Operating hours: 33,000 • Spindle hours: 22,000 • Rapid traverse: 42 m/min • Installed options/software: • High-pressure coolant (through-spindle), 15 bar • Synchronized tapping • Tool length measurement • Workpiece air blast • Hand-held coolant nozzle • Automatic peck drilling cycle with load detection • G00 slope constant function • High surface smoothing on contours (High Smoothing Control) Iedpfx Aboyhcvijgeia • Mazatrol-to-ISO program conversion • Program memory expansion • Preparation for workpiece probe (OMP60) • Preparation for chip conveyor (left side) • MAZACC-3D high-speed software package • CNC functions and connectivity: • NC user macros • Mazak drilling/tapping cycles (Mazatrol & EIA) • EIA/ISO code input • Constant tool tip speed function • Programmable block stop (M01) • Background tool path verification (MAZACC-2D) • Up to 300 workpiece coordinate systems • Thread cutting functions • EIA canned cycles (chamfering, arc machining) • USB interface (2 ports) • LAN port Additional equipment • Chip conveyor, left-hand, hinge type (Mayfran) • 4th-axis simultaneous kit: Kitagawa NC rotary table (MR200) Technical Specification Taper Size ISO 40

Condition: new, bending length: 2100sheet thickness: 45prebending: 35Upper Roll Diameter: 430Side Roll: 390motor: 30messurements (LxWxH): 5200 x 2200 x 2500weight approx.: 19000 Technical specifications: - Hardened and polished rolls - Conic bending device - Digital readout for side rolls - Complete body made of ST-52 Steel - Portable control panel separated form machine - Rolls are mounted with bearings Iijdpeytyy Njfx Abgsa - Top roll cover, openable and closeable by hydraulic, controlled from control panel. - All rolls are driven by hydraulic motor and planetary gearbox - Side rolls upwards downwards movements are hydraulic powered

Condition: as good as new (ex-display), The TDM S 430/1000 is a highly versatile Conventional Horizontal Lathe from KNUTH, designed to meet the demands of both single part and small batch productions in tool making and device construction. With an inverter that allows spindle speeds of up to 2,000 rpm and a user-friendly control panel, this lathe is ideal for training applications. Its robust construction features a one-piece heavy-duty cast-iron bed, ensuring increased rigidity and stability during operation. A modern 3-axis position indicator, adjustable longitudinal stops for automated feed shut-off, and a powerful coolant system further enhance its functionality. The TDM S 430 also includes an easy-to-read digital display for spindle speed, ergonomic selector levers for effortless control, and comprehensive standard equipment such as a 4-station tool holder and a robust LED work lamp. Experience precision and efficiency in your machining tasks with the TDM S 430/1000. Request a quote today to explore how this exemplary Conventional Horizontal Lathe can elevate your production capabilities. Iisdpfx Abeuyg Dnjgja

Condition: used, Year of construction: 1989, For sale: Used SAC surface planer with a planing length of 2900 mm. The machine is in good condition and has been refurbished and inspected by our specialist staff. Technical specifications: - 4-knife cutterblock - Planing width: 430 mm - Planing length: 2900 mm - Extractable, suction diameter Ø 140 mm - Motor power: 4 kW / 5.4 HP Iedpfxsyh Auij Abgoia - Year of manufacture: 1989 The planer is located in A-5431 Kuchl and can be inspected any time during our opening hours. Subject to prior sale! Related terms: planer, surface planer, jointer. Reference: R-G00 V0

Condition: used, Year of construction: 2001, operating hours: 5,600 h, functionality: fully functional, machine/vehicle number: E-07687, overall weight: 1,300 kg, load capacity: 200 kg, arm reach: 2,643 mm, pivoting range: 360 °, controller manufacturer: Fanuc, controller model: RJ3, teach pendant manufacturer: Fanuc, control cabinet width: 800 mm, type of input current: three-phase, repeat accuracy: 0.3 mm, warranty duration: 6 months, With just under 6000 operating hours, it is almost as good as new. It served us as a training robot and over the past 10 years was used solely for stacking empty beer crates for practice purposes. The condition is very good. The attachments will be dismantled in advance. Delivery of the robot can be arranged at an additional cost if desired. You are welcome to inspect and test it at our premises. Iodpfxjynk D Ue Abgoia

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, product width (max.): 433 mm, working width: 430 mm, • 8 UV printing units • 2 rotary top loading die-cutting units • Waste shaft with additional pressure roller • GEW UV curing system • 2 additional hot air curing units • Sensotec printing register system • Insetting system • Cooled anvil drums • 2 rail-mounted cold foiling or laminating sections with interchangeable positions • Aditional Oil-heated rotary Hot-foil unit • Belt Conveyor for sheet output • Automatic sheet collection and stacking table/elevator • Splise recognition sensor • Web breakage sensor • End of the roll sensor Iijdpfxsymr Sqs Abgja • Erhardt+Leimer Web guiding system • TekNek web cleaning unit • Slitting knives • Rotary Embossing Cylinder 31 anilox roller 550 aluminium printing cylinders 13 magnetic cylinders 3 cross cutting cylinders

Year of construction: 2000, condition: used, Screw block for screw compressor, compressor, compressed air unit, stationary compressed air compressor, screw block, compressor, compressor stage -Manufacturer: Boge, screw block compressor stage from compressor type SL 270 -Screw block: type BS 430 -Final pressure: max. 15.0 bar Isdpfx Abepm Thtegjia -Hole circle: Ø 295 mm / M20 / Ø 740x22 mm -Shaft: Ø 100 x 200 mm -Dimensions: 1200/850/H790 mm -Weight: 917 kg

Condition: used, Year of construction: 2011, MAZAK - VCS430A - 2011 - system MAZATROL Smart - from low series manufacturing shop - 4th axis Kitagawa NC Rotary table MR200 - spindle taper ISO40 - spindle 12000 RPM - spindle 18,5 kW  - table 900(X) x430(Y)  - moves 560(X) x 430(Y) x 510(Z) mm - rapid move 42 m/ Min  - Productivity Packages - 15 bar spindle through cooling - in January 2026: Power ON: 16251Hrs / Auto Cutting: 15231Hrs - to be sold soonest in May 2026, when a new bigger MC arrives Isdsymlgzspfx Abgsia

Condition: excellent (used), mileage: 215,509 km, power: 316 kW (429.64 HP), first registration: 11/2003, fuel type: diesel, axle configuration: 4x2, fuel: diesel, brakes: retarder, color: green, driver cabin: sleeper cab, gearing type: mechanical, suspension: steel-air, Year of construction: 2003, Equipment: retarder, spoiler, = Additional options and equipment = - Roof spoiler - Tipping hydraulics - Power take-off (PTO) = Notes = TIPPING HYDRAULICS SPOILERS ZF RETARDER MANUAL GEARBOX = Further information = Iisdpfjyhr Tkox Abgoa Front axle: Steered; Suspension: Leaf spring Rear axle: Twin tyres; Suspension: Air suspension Number of cylinders: 6 Unladen weight: 7,100 kg Payload: 12,015 kg Gross vehicle weight: 19,115 kg Technical condition: very good Optical condition: very good Contact Thierry Leemans for more information.

Condition: good (used), functionality: fully functional, Year of construction: 1987, Used 4-meter guillotine shears from Safan Model: VS 430 6 Capacity: 4300 x 6 mm Year of manufacture: 1987 Electric backgauge with NC readout Iiedpfxoxtpwvj Abgea Adjustable cutting angle

Condition: new, sheet thickness: 45bending length: 2100upper roll diameter: 430 Technical specifications: - Hardened and polished rolls - Complete body made of ST-52 Steel - Machine have 4 rolls and designed for symmetrical working principle - Hydraulic powered cover for easy material extracting - Digital readout for side rolls (2 digital readout) - Side rolls are free for rotation and upwards downwards movements are hydraulic powered - Top and bottom rolls are driven by hydraulic and gearbox. Bottom roll’s vertical movements are hydraulic powered - Separate control panel form machine - Conic bending device Iedpfx Aed Ab Rnobgoia - In accordance for CE norms Options: - variable speed of rotation EURO 5.858,-- - metarial feeding table EURO 3.506,-- - oil coiler   STD. - center support EURO 13.600,-- - side supports EURO 9.600,-- - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Changeable top roll - Adjustable bottom roll support system (for customer’s special requests) We have many references!

Condition: new, bending length: 4100sheet thickness: 20upper roll diameter: 430 Technical specifications: - Hardened and polished rolls - Conic bending device - Digital readout for side rolls - Complete body made of ST-52 Steel - Portable control panel separated form machine - Rolls are mounted with bearings - Top roll cover, openable and closeable by hydraulic, controlled from control panel. - All rolls are driven by hydraulic motor and planetary gearbox - Side rolls upwards downwards movements are hydraulic powered Options: - variable speed of rotation EURO 5.858,-- - metarial feeding table Euro - oil coiler STD. Iisded Ab Srepfx Abgoa - center support EURO 13.600,-- - side supports EURO 15.400,-- We have many references!

Condition: new, bending length: 3100sheet thickness: 35upper roll diameter: 430 Technical specifications: - Hardened and polished rolls - Conic bending device - Digital readout for side rolls - Complete body made of ST-52 Steel - Portable control panel separated form machine - Rolls are mounted with bearings - Top roll cover, openable and closeable by hydraulic, controlled from control panel. - All rolls are driven by hydraulic motor and planetary gearbox - Side rolls upwards downwards movements are hydraulic powered Options: - variable speed of rotation EURO 5.858,-- - metarial feeding table  Iiodpfxed Ab Ste Abgoa - oil coiler STD. - center support EURO 13.600,-- - side supports EURO 12.000,-- We have many references!

Condition: new, bending length: 2600sheet thickness: 40upper roll diameter: 430 Iedpod Ab Suefx Abgeia Technical specifications: - Hardened and polished rolls - Conic bending device - Digital readout for side rolls - Complete body made of ST-52 Steel - Portable control panel separated form machine - Rolls are mounted with bearings - Top roll cover, openable and closeable by hydraulic, controlled from control panel. - All rolls are driven by hydraulic motor and planetary gearbox - Side rolls upwards downwards movements are hydraulic powered Options: - variable speed of rotation EURO 5.858,-- - metarial feeding table  - oil coiler STD - center support EURO 13.600,-- - side supports EURO 9.600,-- We have many references!

Condition: new, sheet thickness: 33sheet length: 3100upper roll diameter: 430 Technical specifications: - Hardened and polished rolls - Complete body made of ST-52 Steel - Machine have 4 rolls and designed for symmetrical working principle - Hydraulic powered cover for easy material extracting - Digital readout for side rolls (2 digital readout) - Side rolls are free for rotation and upwards downwards movements are hydraulic powered - Top and bottom rolls are driven by hydraulic and gearbox. Bottom roll’s vertical movements are hydraulic powered - Separate control panel form machine - Conic bending device - In accordance for CE norms Options: - variable speed of rotation EURO 5.858,-- - metarial feeding table EURO 3.400,-- - oil coiler    STD. - center support EURO 13.600,-- - side supports EURO 12.000,-- - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Changeable top roll - Adjustable bottom roll support system (for customer’s special requests) Iedpfx Aod Ab Rlebgoia We have many references!

Condition: new, sheet thickness: 40bending length: 2600upper roll diameter: 430 Technical specifications: - Hardened and polished rolls - Complete body made of ST-52 Steel - Machine have 4 rolls and designed for symmetrical working principle - Hydraulic powered cover for easy material extracting Isdpfx Absd Ab Rmogoia - Digital readout for side rolls (2 digital readout) - Side rolls are free for rotation and upwards downwards movements are hydraulic powered - Top and bottom rolls are driven by hydraulic and gearbox. Bottom roll’s vertical movements are hydraulic powered - Separate control panel form machine - Conic bending device - In accordance for CE norms Options: - variable speed of rotation EURO 5.858,-- - metarial feeding table EURO 3.400,-- - oil coiler STD. - center support EURO 13.600,-- - side supports EURO 9.600,-- - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Changeable top roll - Adjustable bottom roll support system (for customer’s special requests) We have many references!