Surface planer

SAC FS 430

Condition: excellent (used), Surface planer Brake motor Undervoltage release Emergency stop Fjdpfoyrflnsx Aaropd NEW motor Various NEW switches CE compliant Total table length: 2900 mm Infeed table length: 1550 mm Outfeed table length: 1310 mm Working width: 430 mm Working height: 800 mm Cutterblock diameter: 120 mm Cutterblock speed: 5000 rpm Number of knives: 4 Knife dimensions: 430 × 35 × 3 mm Rabbeting depth: 20 mm Planer fence L × H = 1000 × 180 mm Fence tiltable up to 45 degrees Motor power: 3.2 kW, 400 V, 50 Hz Dimensions L × W × H: 2900 × 700 × 960 mm Weight: 475 kg

Condition: used, Year of construction: 2000, Number of boring spindles 5 St. Working width 230 mm Fpjdswztw Sspfx Aared Working height 160 mm Feed motor 4 kW Feed speed 5-24 m/min.

Condition: used, Year of construction: 1989, For sale: Used SAC surface planer with a planing length of 2900 mm. The machine is in good condition and has been refurbished and inspected by our specialist staff. Technical specifications: - 4-knife cutterblock - Planing width: 430 mm - Planing length: 2900 mm - Extractable, suction diameter Ø 140 mm Fpjdjyh Auiepfx Aared - Motor power: 4 kW / 5.4 HP - Year of manufacture: 1989 The planer is located in A-5431 Kuchl and can be inspected any time during our opening hours. Subject to prior sale! Related terms: planer, surface planer, jointer. Reference: R-G00 V0

Condition: ready for operation (used), Year of construction: 1984, SAC Surface Planer FS 430 Table length mm 2900 Infeed table mm 1550 Outfeed table mm 1310 Table width mm 430 Table height mm 800 Cutterhead diameter mm 120 Cutterhead speed rpm 5000 Number of straight knives 4 Straight knives mm 430 × 35 × 3 Rabbeting depth mm 20 Planer fence mm 1005 × 180 Fence tilt 0-45 Fedpsx S Ivkefx Aaropd Motor power HP 4 Required space mm 2900 × 700 × 960 Weight kg 475 Condition: function tested

Condition: new, TC 165 x 750V Illustration shows MIOTAL® TC 180 x 1000 Center distance: 750 mm Center height: 165 mm Swing diameter over bed: Ø 330 mm Bed width: 190 mm Cross slide travel: 160 mm Top slide travel: 90 mm Spindle connection: DIN 55029 (Camlock) D 1 - 4 Spindle bore: Ø 40 mm Max. Chuck diameter: Ø 200 mm Spindle speed, infinitely variable: 30 - 2000 1/min Mechanical feed stages: 3 Motor power: 2.2 kW Longitudinal feeds Z: (40) 0.044 - 1.96 mm/rev Face feeds X: (40) 0.022 - 0.98 mm/rev Metric thread: (32) 0.4 - 7.0 mm Thread inch: (32) 4 - 56 Gg/inch Thread module: (32) 0.4 - 7.0 Diametral thread: (32) 7.5 - 112 Quill diameter tailstock: Ø 40 mm Inner taper of quill tailstock: MK 3 Quill stroke: 100 mm Lateral adjustment: ± 10 mm Weight, approx.: 650 kg Features: - Acceptance protocol according to DIN - Precise, hardened and ground guides - Robust headstock with recirculating oil lubrication, precision bearing-mounted spindle, hardened and ground gears for long-lasting quality - Electromagnetic spindle brake (TC), frequency converter with electric braking device (V models) - Torsion-resistant machine beds made of MEEHANITE quality casting, stress-free annealed and multi-ribbed for extremely smooth running - Electrical equipment from SIEMENS/SCHNEIDER - Overload protection for feed gearbox - Pulse button for main spindle - CE / IEC as well as German documentation and German service Fpjdpfoir Igwox Aared Basic equipment (standard accessories): - Machine stand with splash guard rear panel - 3-jaw lathe chuck - 4-fold steel holder - Foot pedal with mech. brake device - Coolant device - Chuck guard and spindle cover in accordance with European safety standards CE - 1 Fixed center point for main spindle - 1 Fixed center point MK3 - 1 Test report - Safety devices and electrical equipment according to CE - Reducing sleeve for main spindle Operating tool Available options for this lathe: - 3-axis digital readout - Quick-change holder system Multifix also available as a gearbox version

Condition: used, Year of construction: 1996, max. blade length: 4720 mm, motor power: 2.2 kW, roller diameter: 600 mm, max. cutting height: 395 mm, max. cutting width: 585 mm, tiltable table: yes, column side: left, fence: usable on both sides, blade guide position: top and bottom, blade guide: roller guide, design: stationary, weight approx.: 300 kg, dimensions: 1115 x 670 x 2115 mm. Storage location: supplier. Fpodoyg Hzgopfx Aarjd

Condition: used, power: 5.5 kW (7.48 HP), cutting height (max.): 130 mm, cutting width (max.): 1,250 mm, saw blade diameter: 400 mm, rotational speed (max.): 6,000 rpm, rotational speed (min.): 4,000 rpm, total length: 3,200 mm, total width: 2,000 mm, total height: 1,800 mm, overall weight: 1,200 kg, cutting length (max.): 3,000 mm, main saw diameter: 400 mm, slide length: 3,000 mm, sliding table length: 3,000 mm, space requirement height: 1,800 mm, space requirement length: 3,200 mm, space requirement width: 2,000 mm, table length: 3,000 mm, Equipment: scorer, No. 04518 Sliding table saw Martin T 60 CLASSIC Used, only 130 operating hours Motor power main saw 5.5 kW Sliding table 3000 mm long Saw blade size 250 - 400 mm diameter Cutting height maximum 130 mm Saw blade tilt motorized 0° - 46° Saw blade change with quick clamping system SprintLock Speeds 4000 / 4800 / 6000 rpm Speeds are determined by the position of the V-belt 2-axis scoring unit pneumatically controlled (Please note: On the video the scorer is not connected to compressed air, therefore you cannot see any height adjustment, but the function is given) Cutting width approx. 1250 mm Control PowerPC Operation via touchscreen Control for cutting height, cutting angle, scoring unit Digital display for cutting height, cutting angle, cutting width Suction connection 120 mm diameter at the bottom, 80 mm diameter at the top of the protective hood Cross table 1300 x 650 mm LW Edging ruler with 2 stops, extendable up to 3200 mm, swivels according to scale Protective hood arm can be swiveled away Complete technical documentation available Including various equipment and tools Transport dimensions approx. 3200 x 2000 x 1800 mm LWH Weight approx. 1200 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Fjdpfjygav Rox Aarspd Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: excellent (used), Technical data: Fpjdpjv Rv Dbofx Aarod Max planing width: 400 mm Max planing height: 240 mm Knife shaft diameter: 120 mm Number of knives: 4 Feed speed: 6-12 m/min Manual lifting Extraction port: 110 mm Power supply: 400 V Motor power: 10 kW Overall dimensions: Length: 2200 mm Width: 860 mm Height: 1250 mm

Condition: good (used), Year of construction: 1988, Weiler lathe Type Condor B 2-axis digital readout Center height 165 mm Center distance 750 mm Rotation over bed 330 mm Rotation over cross slide 185 mm Fpedevgmbvjpfx Aarod Spindle bore 40 mm Connected load 3 kw Speed 22-2800 rpm Tailstock MK 3 Coolant pump (not connected) work light Automatic longitudinal and planar feed spindle brake - Folding jaw chuck guard - splash guard Weight approx. 1040 kg 3 jaw lathe chuck Multifix B Rotating center point

Condition: reconditioned (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 3595, Ladies and Gentlemen, We are selling a Weiler Commodor B lathe built in 2001 with Heidenhain 3-axis digital readout. The machine has been extensively overhauled in our workshop. Among other things, the main spindle bearing and the lead/traction spindle bearing were completely renewed! Technically, geometrically and visually, the machine is in excellent condition, which you are welcome to see for yourself on site. Availability: on request Machine no. 3595 Year of construction: 2001 Center height: 180mm Center width: 1000mm spindle passage: Ø 56mm max. spindle speed: 2000 rpm Tailstock taper mount: MK4 Feed range: 0.026 - 0.888 mm/rev Possible thread types: Metric, inch, module, diametral pitch Metric thread pitches: 0.35 - 12 mm Spindle brake: switchable Connected load: 4kW Dimensions: approx. 2.2x1.5x1m (LxHxW) Weight: approx. 1.8t Further equipment and accessories: 3-axis digital display, coolant device, chuck guard, pull-out chip tray, 3-jaw chuck Röhm, 4-jaw chuck Röhm, various clamping jaws... Our service promise to you: - We are a certified master company in the field of mechanical engineering - All machines are thoroughly checked Fedpjthd Shsfx Aarspd - All lubricants and any worn parts are replaced in advance - On request, we can completely or partially overhaul your chosen machine - On request, we can repaint the selected machine in the color of your choice E00f3g2rl - On request, you can also order additional accessories such as tools etc. directly - On request, we can install additional accessories such as safety devices etc. - We are happy to take care of shipping and/or installation