Planer-thicknesser

Griggio FS430

Condition: used, Year of construction: 1995, Swivel spindle: Yes -5 to 45° Height adjustment: Handwheel Dedpeuzkwzsfx Affour Swivel adjustment: Handwheel Milling jaw adjustment: manual Height display: mech. counter Swivel angle display: mech. counter Milling stop display: mech. counter Milling spindle diameter: 30mm / new milling spindle Speeds: 3000, 4500, 6000, 9000 Motor power: 5.5 kW Motor brake: Yes, automatic Suction connection: 2 x 120mm Machine length: 2000mm Machine depth: 1400mm weight: 900kg

Condition: used, Working width 610 mm Working height 200 mm Motor output 4,4 kW Feed speed 7-14 m/min. weight of the machine ca. ca. 1.150 kg Duodpfx Afowy Itlsfjr

Condition: used, 3 pcs , useful dimensions length 13,68 width 7,92 height 4,62 Dodpfx Afetprb Hsfeur useful volume 140 m3 each one

Year of construction: 2013, condition: used, Drying chamber with false ceiling ventilation and frontal trolley loadingfor the production and conditioning of 3 mm oak lamellas, at initial moisture 12 tomax. 15 % / final humidity 7 %used, good conditionmake Mühlböcktype ZSWM2110-1180C - 1.0 l/h at 40° C over 30 % HFyear of construction 2013rated power 7 kW/15Afrequency 50 Hzcontrol voltage 24VDC/230VACprotection class IP54content:the chamber holds- 2 packages in width a 1.10 m - with 0.20 m space between each package- 1 package in height a 1.80 m - with 0.10 m thick underlays and a 0.10 m high free space- 2 packages in length a 2.20 m - plus 0.60 m free spaceThe chamber contains 4 stacking packages and has a total gross volume of 17.4 m²The chamber has a net capacity of 4 m³ of timber - with a timber thickness of 3 mm and a stacking strip thickness of 10 mmand 90 % width utilization with edged ble dimensions of each chamber: Width 2.40 m x height 2.30 m x length 5.00 m- aluminum cassette construction- aluminum frame- dimensionally stable rock wool insulation- aluminum trapezoidal sheet- snow load 100 kg/m²- 2-leaf hinged door- front loading- 2 fans a 3 kW (D=800 mm)- stainless steel/aluminum finned tube heating coil with 50 kW, flow temperature of 80 °C, return temperature 73°C- servo-controlled supply and exhaust air flaps- cold water spraying- chambers work fully automatically- computer control K5Disassembly: Customer locationhandover as viewedwithout guarantee and warranty Dedpjvwfhijfx Affjur

Condition: new, Year of construction: 2026, The Cormak PT265 planer-thicknesser is a solid and well-thought-out design that offers great possibilities for adjustment and mechanical processing of both hard and soft wood. The adjustment itself is simple and changing the planer to a thicknesser takes a few seconds. The latest version of the machine with an innovative tabletop opening system: ❌ Competitive old-type machines have "butterfly" tabletops. Before each start of work, the feed table and the receiving table should be calibrated with each other. Even small differences between them lead to damage in the material, giving undesirable effects. ✔️ The new solution of connected tabletops allows for precise adjustment of both tables at the same time! Thanks to this, once set, the tables are permanently calibrated. When changing the planing height, both tables move simultaneously. ✔️ This solution not only saves time, makes work with the machine more convenient, but also increases the precision of planing by 30% compared to the old solution. This is very important, especially when working with thinner materials. Stable construction resistant to vibrations The weight of the machine up to 170 kg combined with wide cast iron grinded tops 265 mm guarantees great stability, which ensures safe work. The additional rubber feet used allow work without the slightest vibrations. VERSION with the most powerful engine with a total power of S6: 2.6kW The PT265 planer-thicknesser is distinguished by an exceptionally powerful engine with a total power of S6 2.6 kW (S1 2.2 kW). This is much more than competitive devices offer, which translates into greater efficiency and stability of work. A more powerful engine means stable work and ease of processing hard materials: Hardwood requires more force for processing. A strong engine will handle this without a problem. Trouble-free change of the planer to the thicknesser. Switching from the planer to the thicknesser function is very quick and easy. It consists of unlocking the eccentrics and lifting the tables and moving the chip extraction cover. Work precision. - Smooth height adjustment of the tops with a scale. - The thicknessing table mounted centrally on the column has a knob for adjusting the setting up and down - Aluminum swinging ruler (700x150 mm) with a scale strip allowing for precise setting at an angle in the range of 90-45 degrees. Technical data: Knife shaft diameter [mm] 75 Knife shaft revolutions [rpm] 4000 Suction nozzle diameter [mm] 100 Swing ruler tilt angle [°] 0 - 45 Number of knives 3 Shaft length [mm] 262 Knife dimensions [mm] 2500x300x30 Maximum planer width [mm] 265 Maximum thicknesser width [mm] 265 Maximum planing height [mm] 180 Maximum thicknesser cutting depth [mm] 3 Maximum planer cutting depth [mm] 2.5 Thicknesser feed speed [m/min] 6 Fence size [mm] 700 x 150 Machine dimensions (length x width) [mm] 1080 x 269 Weight [kg] 170 Total engine power S6: 2.6 kW Dusdpsvxhznofx Affsr Power supply 400V

Condition: new, Year of construction: 2026, VERSION with the most powerful engine with a total power of S6: 2.6kW. A more powerful engine means stable operation and easy processing of hard materials: Hardwood requires more force for processing. A powerful engine will handle this without a problem. The latest version of the machine with an innovative tabletop opening system: Competitive old-type machines have "butterfly" tabletops. Before each start of work, the feed table and the receiving table should be calibrated with each other. Even small differences between them lead to damage in the material, giving undesirable effects. The new solution of connected tabletops allows for precise adjustment of both tables at the same time! Thanks to this, once set, the tables are permanently calibrated. When changing the planing height, both tables move simultaneously. Such a solution not only saves time, makes work with the machine more convenient, but also increases the precision of planing by 30% compared to the old solution. This is very important, especially when working with thinner materials. Trouble-free change from a planer to a thicknesser. The transition from planer to thicknesser is very quick and easy. It consists of unlocking the eccentrics and lifting the tables and moving the chip extraction cover. Work precision. Smooth height adjustment of the tops with a scale. The thicknesser table mounted centrally on the column has a knob for adjusting the setting up and down Aluminum swinging ruler (700x150 mm) with a scale strip allowing for precise setting at an angle in the range of 90-45 degrees. Technical parameters Knife shaft diameter 75 mm Knife shaft speed 4000 rpm Suction nozzle diameter 100 mm Swing ruler tilt angle 90–45° Number of knives 3 Dusdpfovxh A Sjx Affjr Shaft length 250 mm Knife dimensions 250x30x3 mm Maximum planer width 250 mm Maximum thicknesser width 250 mm Maximum planing height 180 mm Maximum thicknesser cutting depth 3 mm Maximum planer cutting depth 2.5 mm Thicknesser feed speed 6 m/min Fence size 700 x 150 mm Machine dimensions (length x width) 1080 x 269 mm Weight 175 kg Total engine power S1: 2.2 kW S6: 2.6 kW Power supply 400V

Condition: like new (used), Year of construction: 2022, For sale is a demonstration unit of a Hammer A3-31 jointer-thicknesser with a planing length of 1400 mm. The machine is in like-new condition. Technical data: - 3-knife cutterhead - Planing width: 310 mm - Planing length: 1400 mm - Max. workpiece height: 230 mm Dujdpfsx U U Ekox Affsr - Motor power: 3 kW - Extractor connection Ø 120 mm - Year of manufacture: 2022 The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Related terms: jointer, thickness planer, planer machine, surface planer, thicknesser Reference: R-A0117

Condition: used, Technical data: Max planing width: 530 mm Knife shaft diameter: 110 mm Number of knives: 4x TERSA Total length of the tops: 2900 mm Electric height adjustment of the table tops Culaga tilting: 0-45 ° Culaga: 1,300 mm Safety switch Dodpfx Afjh Nypmjfsur Power supply 400 V Engine power: 4 kW Producer: Griggio Overall dimensions: Length: 2900 mm Width: 1030 mm Height: 1110 mm

Year of construction: 2014, condition: like new (used), fully automatic supply and exhaust Duedevzuutjpfx Affor 3 chambers chamber dimensions 6.5 x 4 x 4.1m furnace power 350kW

Condition: new, - new -BeschreibungMit TERSA cutter block for sekundenschnelles HobelmesserwechselnTERSA-Hobelmessersystem ermögclear opening particularly geräuscharmen Lonangular verzahnte steel input roller for konstanten and gleichmäßigen HolzeinzugDie particularly langen Abrichttische aus einem piece ermöglichen leichtes Abrichten der WerkstückeGroßer surface fence kann beim opening der Abrichttische in seiner Position bleibenNach rear öffnende AbrichttischeDas hohe Maschinengewicht sorgt for höchste Präzision and ruhigen LonLeistungsstarker Industrie-motorRobuste steel-/GraugusskonstruktionArbeitstische aus Grauguss, nachgeglüht and spannungsfrei, dadurch unempfindlich and dauerhaft planarsurfacing table lip plates for geräuscharmen LonAusstattungsdetails:TERSA-HobelmesserwelleKein Einstellen and Schrauben mehrHobelmesserwechsel in SekundenSelbstarretierendBesonders low noisePerfektes HobelergebnisAbsaugschlauch-AnschlussDie suction nozzle der surface planer and thickness zeigen in the selbe Schlauchanschluss erfolgt from nur einer side wird kein Schlauch benötigt, der um the machine veStabil ausgelegter KettenantriebAntriebsräder aus steelMassiver GraugusslagerbockHobelwerkMassive Rückschlagsicherungen verhindern den kick-back from WerkstückenTERSA-Hobelmesserwelle with three Messern sorgt for ein optimales HobelbildDer MaterialeinzugSchrägverzahnte Stahleinzugswalzen for einen konstanten and gleichmäßigen Materialeinzug without AbdrückeMehreright hand Zähne greifen gleichzeitig for kraftvollen feederVerschleißfrei im Gegensatz zu GummieinzugswalzenTechnische Daten:dimensions and Gewichtelength (Produkt) ca.     2015 mmweight (Netto) ca.     330 kgwidth/depth (Produkt) ca.     990 mmdrive powercapacity driving motor     5 kWsurface planertotal length der tables     1800 mmchip removal max. surface planer     4 mmworking height     900 mmAnschluss Absaugungsuction nozzle diameter thickness     2 x 120 mmAufstellinformationenrequired space length     2015 mmMaschinenkörper width/depth     596 mmrequired space width/depth    1 460 mmworking dimensions length     1000 mmErläuterung required spaceDie dimensions berücksichtigen maximale Verfahrwege or Nutzläking dimensions width/depth     3500 mmMaschinenkörper length     659 mmErläuterung zu working dimensionsDie angegebenen dimensions bitte with dem required space addieren, um the for the machine empfohlene freie assembly area zu cknessDickentisch length     605 mmworking height thickness max.     230 mmDickentisch width     420 mmchip removal max. thickness     4 mmworking height thickness min.     3 mmElektrische DatenAnschlussspannung     400 VStromart     ACPhase(n)     3 PhNetzfrequenz     50 HzHobelmesserwelleHobelwellentyp     TERSAHobelwellendrehzahl     5200 min¯¹Hobelwellendurchmesser     72 mmplaning width max.     410 mmnumber of Hobelmesser     3 Stfeederfeed speed     7 m/minincluded in deliveryTERSA-Hobelmesserwelleeloxierter Aluminium-surface fenceNo. 550 3414 Dsdpfx Asvwga Heffour