Hydraulic plate shears

Safan VS 430 6

Condition: good (used), Year of construction: 1999, Overhead crane, crane, electric hoist, manual trolley, trolley, crane trolley, crane trolley, crane trolley, trolley, girder trolley, monorail trolley, hoist -Manufacturer: Steel, crane chassis with electric cable winch -Cable pull: Type AS 3016-16 2/1 -Load capacity: 3200 kg Lrsdpfstlzdqex Akqsk -Main stroke: 8 m/min -Fine stroke: 1.35 m/min -Drive system: FA-C 3728 133-1 -Travel speed: 5/20 m/min -Roller spacing: 1400 mm, dimensions see photos -Drum speed: 16.0 / 4.0 m/min -Quantity: 1 crane trolley available -Price: per piece -Transport dimensions: 1670/1200/H470 mm -Weight: 462 kg/unit

Condition: used, functionality: fully functional, Year of construction: 2008, Used RAS 86.33 swing-beam guillotine shear with newly ground upper and lower blades, always serviced and rarely used. Technical specifications: Year of manufacture: 2008 Weight: 6,800 kg Max. sheet thickness at 400 N/mm²: 6.3 mm Working length: 3,190 mm Stop depth: 5-1,000 mm Working height: 800 mm Stroke rate per minute: 30-64 N/min Connections: 400 V / 50 Hz / 40 A 3 PE / three-phase AC Power consumption: 18.5 kW Machine width: 3,830 mm Machine depth without angle stop: 2,195 mm Machine depth with angle stop: 3,275 mm Machine height: 1,725 mm Lsdpfx Akev Tk Exoqjrk Air pressure: 5 bar Frame overhang: 100 mm Tank capacity: 150 l

Condition: used, Hydraulic Plate Shear LVD Type HST-C 31 / 6 Machine No. 21348 Year of manufacture: 1994 Cutting length: 3,100 mm Cutting thickness: 6.35 mm Backgauge: 770 mm Working height: 950 mm Hydraulic sheet hold-downs: 17 units Hydraulic tank capacity: 150 liters Motor power: 7.5 kW Power connection: 400 Volt, 50 Hz, 9.5 kW, 19 Amp. - Motorized backgauge with digital actual position display ELGO - Backgauge adjustment via push button – rapid in both directions and fine adjustment by jogging in the minus direction only - Sheet lifting device below the backgauge with pneumatic lifting cylinder - Continuously adjustable blade gap from 0.1 mm via handwheel with analog display Ledpfetvb Iujx Akqsrk - Cutting angle adjustment in 5 steps from 1.5° to 3.5°, electrically pre-selectable - Left side angle stop 1,500 mm - 2 table extensions as sheet supports - Electric foot switch - Comprehensive operating manual Space requirements without front table extension (L x W x H): 4,150 x 1,850 x 1,900 mm Space requirements with front table extension (L x W x H): 4,150 x 2,850 x 1,900 mm Weight: 5.5 tons Good condition Very good cutting results, including with thin sheet metal

Condition: ready for operation (used), Max. workpiece thickness: 20mm, including one unused and originally packed set of blades. Lrodpsim Ixfjfx Akqek

Condition: excellent (used), Year of construction: 2000, Technical specifications: Max. cutting width: 3050 mm Max. cutting capacity for steel: 0.4 - 6.0 mm Max. cutting capacity for stainless steel: 4.0 mm Max. cutting capacity for aluminium: 8.0 mm Adjustable back gauge: 1050 mm NC control Cutting gap adjustment via control Cutting angle adjustment via control: 0.4 – 2.2° Sheet holding function Lrjdpfsymgrrex Akqjk Strokes per minute: 33 cuts Motor power: 5.5 kW Dimensions (L x W x H): approx. 3800 x 2300 x 1950 mm Weight: approx. 6.5 tons The seller accepts no liability for typographical or data transmission errors. The machine’s appearance, technology and wear are consistent with its age; used machines are sold without any warranty.

Condition: used, functionality: fully functional, Year of construction: 2004, Hydraulic Guillotine Shear Make: ERMAKSAN Model: HGS 3100x6 Year: 2004 Technical Data: Manufacturer: ERMAKSAN Model: HGS 3100x6 Year of Manufacture: 2004 Lrjdpfx Akexrtxueqjk Sheet Width: 3,100 mm Sheet Thickness: 6 mm Cutting Angle: 1.2° Strokes per Minute: 18 Number of Hold-Downs: 15 Motor Power: 11 kW Back Gauge: 1,000 mm Space Requirement: L 3.8 x W 2.2 (plus support arms) x H 1.6 m Machine Weight: 5.5 t Equipment: • Angular stop • Support arms • Programmable 1,000 mm back gauge via ELGO controller • Automatic blade gap adjustment • Pneumatic sheet support device • Cutting length limiter • Folding finger guard • Light barrier for rear area safety All information is provided without guarantee. A powered demonstration is available at any time in our showroom.

Condition: used, functionality: fully functional, ---SCHIAVI hydraulic guillotine shear PROMECAM 3000X10, throat 500 mm, motorized backgauge, dimensions: 3400x2150x2000(H) mm, weight 8900 kg Lrjdswn Tk Ejpfx Akqek ---SCHIAVI hydraulic guillotine shear 3000X6, throat 500 mm, motorized backgauge, dimensions: 3400x2000x1800(H) mm, weight 7500 kg

Condition: used, Year of construction: 2013, sheet width 3050 mm plate thickness 10 mm cutting angle 1-4 ° back stop - adjustable 10 - 1000 mm 13 Stück 25 mm 60 mm Ledpfx Aey Dh Nujkqerk quantity of oil 240 l 24 1/min. total power requirement 15 kW weight of the machine ca. 6300 kg dimensions of the machine ca. 4100x3800x2000 mm

Condition: used, Max. cutting length: 3,000 mm Max. sheet thickness: 6 mm steel Motorized backgauge with digital display up to 1000 mm Side stops and table extensions Lrodpfx Ajvmz Nbskqsk cutting length limitation Cutting edge lighting Hydraulic shear angle adjustment knife sharpened Weight: approx. 6500 kg

Condition: good (used), functionality: fully functional, Year of construction: 1998, Hydraulic Guillotine Shear Make: HERA Model: TK 3000 x 10mm Year: 1998 Technical Data Brand: HERA Model: TK 3000 x 10 Year of manufacture: 1998 Sheet size: 3050 x 10 mm Passage: 3080 mm Cutting angle: 1-3° Working height: 900 mm Strokes per minute: 14 1//min Motor power: 15 kW Dimensions: approx. L 4.15 x W 2.96 x H 2.20 m Weight: approx. 8.5 t Equipment • Siemens Simatic OP7 control unit • NC-controlled rear gauge • Full-length folding finger guard • Angle stop • Ball rollers in the support table • Cutting line illumination • Support arms • Automatic cutting angle adjustment • Automatic blade gap adjustment • Operating manual All information subject to change and without guarantee. Lsdpsy Dr N Ejfx Akqerk A demonstration is possible at any time in our showroom.