Used Weingarten Ar 100 for sale (33,243)

Condition: used, Year of construction: 1976, pressure 100 t throat 315 mm Klsdsugnpispfx Abgsr stroke 8 - 112 mm table surface area 725 x 570 mm ram surface 410 x 315 mm ram adjustment 80 mm no. of strokes 55 / 82 Hub/min tool shank hole (depth x diameter) 85 x 50 mm dayligth 355 mm total power requirement 7,5 kW weight of the machine ca. 6 t dimensions of machine L x W x H 2,00 x 1,00 x 2,87 m

Condition: used, Single-column eccentric press WEINGARTEN type ARP 100 Machine no. No. 122481 Year of construction 1984 Pressure capacity 100 ton. throat 400 mm Table size 920 x 660 mm ram surface 700 x 450 mm Rear upright width 735 mm Stroke adjustment 20 - 160 mm Plunger adjustment 80 mm Installation height with 160 mm stroke max. 355 mm (without intermediate table top) Installation height with 20 mm stroke max. 425 mm (without intermediate table plate) Stroke rate 60 strokes/min. Table surface intermediate table top 920 x 610 mm Kljdpfxsu Rwa Ij Abgsr Thickness of intermediate table top 90 mm Hole in intermediate table top Ø 210 / 180 mm Through-hole in machine table Ø 210 / 180 mm Table height above floor 800 mm (without intermediate table top) T-slot width in table and ram 22 mm Clamping pin bore 50 mm Motor power 11 kW Mains connection 400 Volt, 50 Hz - Hydraulic overload protection in ram - ORTLINGHAUS pneumatic clutch/brake combination - Electromotive ram adjustment with counter - Clamping pin bore with clamping piece - Front crankshaft support bearing - Gear reduction gears in closed oil bath gearbox - Two pneumatic tappet compensation cylinders - WOERNER automatic central grease lubrication - Lift release via electric foot switch or two-hand control panel - Electrical control cabinet permanently attached to the machine - Operating instructions and circuit diagram - UVV for manual insertion work Space requirement L x W x H 2200 x 1600 x 3250 mm Weight 8.3 tons Good condition

Year of construction: 1985, condition: ready for operation (used), Press force: 100t, stroke rate: 60/min, ram stroke: 8mm-137mm, ram adjustment: 80mm, throat depth: 375mm, table dimensions X/Y/Z: 800mm/630mm, machine dimensions X/Y/Z: approx. 1500mm/2400mm/3500mm, weight: approx. 8800kg. An on-site inspection is possible. Kodpfxjyu T Dqe Abgslr

Year of construction: 1981, condition: ready for operation (used), There are two identical eccentric presses available, nominal force: 1000kN, stroke speed: 30-85/min, stroke adjustment: 20-125mm, weight: 8t, year of construction machine 1/ 2: 1978/ 1981, with documentation. Klodpfx Abolc N Rvogor

Year of construction: 1966, condition: used, pressure 100 t throat 410 mm stroke 8-112 mm no. of strokes doubel-strokes per min. 55 / 82 ram - range of adjustment 80 mm table surface area 950 x 700 mm ram surface 700x450 mm hole in the table Ø 280 mm Kledpelp U D Ejfx Abgor table height 850 mm tool hole in ram Ø 50 mm weight of the machine ca. 7,0 t dimensions of the machine ca. 1400x2200x2800 mm

Year of construction: 1977, condition: used, pressure 100 t throat 410 mm stroke 8-112 mm no. of strokes 55/82 Hub/min ram - range of adjustment 80 mm table surface area 950x700 mm ram surface 700x450 mm hole in the table Ø 280 mm table height 800 mm Klsdpfx Aslp U Dasbgsr total power requirement 11 kW weight of the machine ca. 7,5 t dimensions of the machine ca. BxTxH 1600x2200x3000 m

Year of construction: 1970, condition: used, pressure 100 t throat 415 mm stroke 8-140 mm no. of strokes 48 Hub/min ram - range of adjustment 80 mm table surface area 920x670 mm ram surface 700x450 mm table height 800 mm tool hole in ram Ø 50 mm weight of the machine ca. 8 t Kedpslp U Spjfx Abgslr dimensions of the machine ca. BxTxH 1500x2000x2800 mm

Condition: used, Year of construction: 1983, pressure 100 t throat 375 mm stroke 20-125 mm no. of strokes 60 Hub/min Klsdpfxjxh Swhs Abgsr ram - range of adjustment 80 mm table surface area 920x660 mm ram surface 700x450 mm hole in the table Ø90 mm tool hole in ram Ø50 mm weight of the machine ca. 8 t dimensions of the machine ca. 2100x1500x3300 m

Condition: good (used), pressing force: 80 t, throat depth: 400 mm, ram adjustment: 80 mm, Capacity: 80 Ton Table surface: 750 x 550 mm Ram Adjustment: 80 mm Stroke length: 8 -112 mm No. of strokes: 78 p/min. Throat: 400 mm Complete with: - Pneumatic clutch - Safety screen Country of origin: Germany Machine LxWxH: 2000 x 1200 x 2900 mm Machine weight: 7000 kg Kledpfx Asugtkxjbgjr

Condition: used, Year of construction: 1971, pressure 100 t passage width . mm stroke . mm tracking travel 45 mm safety distance 208 mm Follow-up time 149 sec The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop Kedpfxoyuttro Abgslr If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 1976, pressure 400 t stroke 30 - 300 mm Ksdpjylzwtsfx Abgslr no. of strokes 55 /min throat 500 mm passage to the back 800 mm dayligth 950 mm table surface area 1580 x 1000 mm hole in the table 400 x 400 mm table height over floor 800 mm ram surface 1000 x 720 mm ram adjustment 125 mm power requirement 37,0 kW Weight 25,0 t dimensions (WxDxH) 2,5 x 3,1 x 5,1 m

Year of construction: 1967, condition: used, pressure 63 t throat 280 mm stroke 8-100 mm no. of strokes 56/84 Hub/min ram - range of adjustment 63 mm table surface area 620x500 mm ram surface 310x260 mm hole in the table Ø 250 mm table height 850 mm tool hole in ram Ø 40 mm Kljdpfx Aslp U Emjbgor weight of the machine ca. 4 t dimensions of the machine ca. 1200x1900x2800 mm

Condition: used, Year of construction: 1981, pressure 080 t throat 345 mm stroke 8 - 112 mm Stroke rate 65 / min Distance table/ram, max. stroke up, adjustment up 472 mm Table surface area 840 x 610 mm Hole in the table 280 / 315 mm Table height above floor 800 mm Passage to the back 500 mm Ram surface 650 x 400 mm Ram adjustment 70 mm Klsdpfxovuua Aj Abgor Power capacity 7,5 kW Weight 6,8 t Dimensions (WxDxH) 1,2 x 1,95 x 3,05 m permitted for manual put-in according to the German Safety Regulations (UVV) with motor, pneumatic clutch-brake combination, hydraulic overload protection in ram, manual stroke adjustment, manual ram adjustment, pneumatic counterbalance in ram, motoric centralized lubrication, two-hand operation

Condition: excellent (used), For sale: Professional milling toolholder by ORION – high German manufacturing quality. • Type SK40 Ø6-100 • DIN 69871 AD standard – central cooling • Collet for Ø6 mm • Length 100 mm • Includes tool (milling cutter / drill bit) • Very good used condition, fully functional ORION toolholders are a reliable choice for CNC machining centers and milling machines with SK40 taper. PRICE IS FOR 1 PIECE. Kodpfjxcgxvjx Abgjlr

Condition: excellent (used), For sale: Professional automatic Vickers hardness tester Mitutoyo HV-100, made in Japan, in excellent technical and visual condition. The device is equipped with the AUTOVICK automatic measurement system and the Mitutoyo Vision Unit, enabling fast, repeatable and fully automatic hardness measurements without operator subjectivity. Intended for measurement laboratories, quality control departments, manufacturing plants, automotive, aerospace, and toolmaking sectors. —— Key information • Measurement method: Vickers (HV) • Model: HV-100 (series HV-100B / HV-100C / 100D) Klodpfx Ajyc H I Sebgjr • Load range: up to 100 kgf • Automatic AUTOVICK system • Integrated Mitutoyo Vision Unit • Automatic impression recognition and HV calculation • Made in Japan • Power supply: 230 V • Stable, heavy-duty laboratory construction —— Technical condition • Device operational and complete • Very good visual condition • Regularly used in an industrial environment • Last technical inspection: 2020 • Ready for immediate operation after connection —— Included in the set • Mitutoyo HV-100 hardness tester • Vision Unit (measuring camera) • AUTOVICK automatic system • Set of weights • Original accessories and holders • Transport cases with equipment • Original Mitutoyo documentation and manuals • Weight: 65 kg

Condition: used, Year of construction: 1977, pressure 250 t stroke 40 - 190 mm no. of strokes 40 /min throat 500 mm passage to the back 1050 mm dayligth 615 mm table surface area 1380 x 880 mm hole in the table 450 mm table height over floor 800 mm ram surface 1200 x 800 mm ram adjustment 125 mm power requirement 22,0 kW Weight 24,0 t dimensions of the machine ca. 2,0 x 2,5 x 3,95 m x m x m Kledpfxovuuaie Abger permitted for manual loading according to the German Safety Regulations (UVV) with motor, pneumatic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, manual stroke adjustment, motoric centralized lubrication, bolster plate, two-hand operation

Condition: excellent (used), Professional tool holders from the renowned brand GARANT (Hoffmann Group). Model 300230 6 SK40-6-100 – clamping diameter Ø6 mm, length 100 mm. • SK40 taper – CNC standard • Clamping diameter Ø6 mm • Holder length 100 mm • Maximum rotational speed 25,000 rpm • High precision and clamping stability • Used, fully functional and ready for work. -- PRICE LISTED FOR 1 PIECE -- Klodpfow Sy D Esx Abgsr

Condition: excellent (used), Professional digital micrometer from the renowned brand Mahr – model Micromar 40 EWR(i) – designed for extremely precise measurements with accuracy up to 0.001 mm. The device in IP65 version is resistant to dust and water, making it ideal for applications in metrology, quality control, and industrial workshops. . Measuring range: 100 – 125 mm . Accuracy: 0.001 mm . Digital readout with large, easy-to-read LCD display . Protection rating: IP65 – resistant to dust and splashes . “ABS” and “Hold” functions – quick measurement hold and zeroing function . High-stiffness frame, ergonomic grip . Includes original box, certificate, user manual, and 100 mm calibration standard . Condition: virtually new / only used for testing Kljdpfoxl Rgiox Abger

Condition: good (used), The scope of delivery includes: 01x pallet rack traverse, used Material color: orange Klodpfjibzftox Abgor IPE profile: 100 x 55 mm agraffe: 3 drillings clear width: approx. 2.700 mm 3 holes per agraffe hole spacing: approx. 100 mm diameter of holes: approx. 11 mm 01x Set screw material consisting of: 06x screws M10 06x nuts 06x washers

Condition: excellent (used), Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Technical data of the pallet rack traverse: Shelving system: Redirack Included in delivery are: 01x pallet rack traverse, used Material color: yellow U-profile: 100 x 50 mm design: head traverse clear width: 2.707 mm 02x safety pins, used execution: completely galvanized To secure the longitudinal beams Against unintentional lifting out General information about the article: This item is offered for pickup only. Any additional transport or shipment of this or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us. Our services at a glance: (prices on request) Assembly, erection our general assembly conditions are to be observed Rack inspection Rack inspection according to DIN EN 15635 executed according to the requirements of BGR 234 visual inspection for all racking systems Delivery with our own fleet Kledpoh S H N Ujfx Abgor (without unloading)

Condition: good (used), The scope of delivery includes: 01x pallet rack traverse, used Material color: orange IPE profile: 100 x 55 mm agraffe: 5 drillings clear width: approx. 2.700 mm Per agraffe: 5 drillings hole spacing: approx. 50 mm diameter holes: approx. 11 mm 01x Set screw material Kledpoibzgxofx Abger consisting of: 10x screws M10 10x nuts 10x washers

Condition: used, pressure 80 t throat 320 mm stroke 8 - 112 mm table surface area 830 x 600 mm no. of strokes 30 - 85 Hub/min ram surface 650 x 400 mm ram adjustment 71 mm clamping plate 990 x 550 mm table height over floor 810 mm table height over floor 800 mm column daylight (vorn) 680 mm column daylight (hinten) 520 mm total power requirement 7,5 kW weight of the machine ca. 7,7 t dimensions of the machine ca. 1,5 x 2,2 x 3,15 m Equipment: - with wheel presentation - fixed table Machine was/is partially overhauled: - Complete disassembly and inspection - Table and ram surfaces milled - New seals and hydraulic hoses - new main engine - the two main bearing bushes, the bushing of the 3rd bearing and the connecting rod bushing are new - Shaft machined and booked out - Painting - new control cabinet with PLC and touchscreen including cabling. - Current UVV test with braking time measurement Kledpfx Abstqm Dmeger

Condition: used, Year of construction: 1989, pressure 250 t stroke 20 - 190 mm Klodpfx Absvut Ncoger no. of strokes 24 / 48 /min throat 500 mm passage to the back 1000 mm dayligth 615 mm table surface area 1400 x 880 mm hole in the table 450/500 mm table height over floor 800 mm ram surface 1380 x 620 mm ram adjustment 125 mm power requirement 29,0 kW Weight 27,0 t dimensions of the machine ca. 2,0 x 2,6 x 4,1 m x m x m permitted for manual loading according to the German Safety Regulations (UVV) with motor with 2 speeds, pneumatic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, semi-automatic stroke adjustment, motoric centralized lubrication, two-hand operation can be inspected in running function in our warehouse

Condition: used, Year of construction: 1977, pressure 80 t stroke 8 - 112 mm no. of strokes 65 /min throat 345 mm passage to the back 500 mm dayligth 472 mm table surface area 840 x 610 mm hole in the table 280 / 315 mm table height over floor 800 mm ram surface 650 x 410 mm Ksdpfjvut Npjx Abgjlr ram adjustment 71 mm power requirement 13,5 kW Weight 6,10 t dimensions of the machine ca. 1,5 x 1,9 x 3,0 m x m x m permitted for manual loading according to the German Safety Regulations (UVV) with motor with two speeds, pneumatic clutch/brake combination (Ortlinghaus), mechanical overload protection in ram, manual stroke adjustment, motoric ram adjustment, fix table, motoric centralized lubrication, two-hand operation

Condition: used, Year of construction: 1985, Pressure 080 t throat 345 mm stroke 20 - 160 mm no. of strokes 65 /min distance table/ram, max. stroke up, adjustment up 495 mm table surface area 920 x 610 mm Ksdpfjvuug Njx Abgjlr table height over floor 800 mm Hole in the table 280 mm passage to the back 670 mm ram surface 650 x 400 mm ram adjustment 50 mm power capacity 10,0 kW weight 7,7 t Dimensions (WxDxH) 1,5 x 2,2 x 3,15 m permitted for manual put-in according to the German Safety Regulations (UVV) with motor, pneumatic clutch, hydraulic overload protection in ram, manual stroke adjustment, motoric ram adjustment, motoric centralized lubrication, two-hand operation Press is at the moment being overhauled electrically and mechanically - video is from before starting the overhaul WITH mechanical partly overhaul, WITH new electrical control Pilz