Press brakes Mantech W67K-40/2000 2020

Mantech W67K-40/2000

Condition: good (used), Year of construction: 2010, Press brake, bending machine, bending machine, swing bending machine, die bending machine -Machine: can be viewed while powered on -CNC press brake: with 3 axes and laser safety system -Working width: 3200 mm -Pressure force: 125 tons -Max. stroke of the bending beam: 160 mm -Distance between the stands: 2700 mm -Backgauge travel: 590 mm -Backgauge: 2 axes electronically movable, 1 axis manually movable Accessories: see pictures -Installation dimensions: 2140/5195/H2530 mm -Transport dimensions: 1680/5195/H2530 mm Lodpfx Akjxxz E Neqshf -Weight: 9300 kg

Condition: used, pressure 50 t chamfer lenght 1500 mm distance between columns 1220 mm Control Cybelec DNC 1200 closing speed 95 mm/min working feed 1-10 mm/sec work stroke 156 mm overrun time 59 ms tracking travel 6 mm throat 200 mm distance table - lower edge of ram 301 mm table width 160 mm table height 850 mm x-axis 550 mm travel R-axis +/- 50 Number of axles 3 (Y, X, R) St. weight ca. 3600 kg a lot of lower and upper tools incl. work light new control in 2003: Cybelec DNC 1200 Lsdpfx Akora Rrheqshf

Condition: ready for operation (used), Year of construction: 1998, pressure 85.0 t chamfer lenght 2050 mm distance between columns 1750 mm column arm 410 mm stroke 365 mm dayligth 535 mm ajustment speed 200 mm/sec working feed 1.0 - 10.0 mm/sec return speed 135 mm/sec back stop - adjustable max. 600 mm table width 120 mm work height max. 1050 mm Number of working hours 28.500 h oil volume 200 l operating pressure 340 bar total power requirement 14.0 kVA weight of the machine ca. 9050 kg range L-W-H 2680 x 2100 x 2885 mm with increased installation height / piston stroke very well maintained condition (!!) with only approx. 28.500 operating hours - in checked condition - machine video - ?v=ZuwyPKJSYLw Lhsdpfx Aexaa Urokqjf Equipment: - CNC electro-hydraulic press brake - including DELEM CNC control * swiveling control panel at the front left - CNC controlled axes: Y1 - Y2 - X - R - Z1 - Z2 - I + CNC crowning - CNC electro-motorized back stop (X axis) - CNC electro-motorized height adjustment of the back stop (R axis) - CNC electro-motorized adjustment of the stop fingers (Z axes) - CNC pneumatic die displacement (I axis) - CNC motorized table crowning - WILA electro-hydraulic upper tool clamping - WILA electro-hydraulic Lower tool clamp - 1x freely movable 2-hand / foot control - 2x front, stable support arms including "sliding system" - side protective device (swinging doors) - rear protective device (swinging doors) - bending tool storage cabinet (right front, side) - original operating instructions + circuit diagram etc. further technical data: - feed speed X axis .. 500 mm/sec. - feed speed R axis .. 300 mm/sec. - feed speed Z axis .. 1000 mm/sec. - travel range X axis .. max. 600 mm - travel range R axis .. max. 250 mm

Condition: ready for operation (used), Year of construction: 2010, pressure 40.0 t chamfer lenght 1270 mm distance between columns 1000 mm column arm 200 mm stroke 100 mm dayligth 308 mm ajustment speed 150 mm/sec working feed 1-10 mm/sec return speed 100 mm/sec table width 100 mm table height 900 mm control DNC 60 PS oil volume 100 l voltage 400 V total power requirement 5.5 kW weight of the machine ca. 2750 kg - in checked conditions - machinevideo - ?v=WRzqKruFUvY Equipment: - CNC electro-hydraulic press brake - CYBELEC "DNC 60 PS" CNC control * Swiveling control panel, front left * Tool & program library - CNC electro-motorized backgauge (X-axis) * X-axis travel = 800 mm * 2x manually adjustable backgauge fingers (R+Z axes) * Backgauge on ball screws Ljdpjx Emqtjfx Akqshf - CNC controlled axes Y1 - Y2 - X - Rehfuß upper tool system "A" with quick-change clamping * Additional crowning device in the tool holder - 4V universal die block with 60 mm die shoe - 2x sliding material/support arms ("Sliding System") - BOSCH/HOERBIGER hydraulic system - SIEMENS electrical system - Light barrier behind the machine - FIESSLER AKAS laser safety device in front of the machine - 1x freely movable Double Foot Switch - Operating Instructions (PDF)

Condition: ready for operation (used), Pressing force: 440kN, working width: 1600mm, cylinder stroke: 150mm, travel X/R: 400mm/200mm, adjustment speed R-axis: 200mm/s, installation height: 400mm, throat depth: 200mm, machine stand distance: 1530mm, motor power: 7.5kW, weight: approx. 2100kg. Including various accessories and tools. Documentation available. On-site inspection is possible. Ljdpju N Hc Nefx Akqohf

Condition: ready for operation (used), Year of construction: 2001, number of axes: 5, This 5-axis TRUMPF TrumaBend V85 press brake was manufactured in 2001. It features an electro-hydraulic ram drive, CNC backgauge system, and a modern protective cover. The machine includes a 4-axis back gauge system and both hydraulic upper and lower tool clamping. If you are looking to get high-quality bending capabilities, consider the TRUMPF TrumaBend V85 machine we have for sale. Contact us for more information about this machine. Additional equipment • Top drive concept in two-cylinder design y1/y2 • Electro-hydraulic ram drive with proportional valve technology • Ram travel measuring system with spring deflection compensation via glass scales • Modern block hydraulics • Cnc backgauge system • Safe finger adjustment from the front • Self-centring, manual, hardened upper tool holder for vertical tool change • Hardened, manual lower tool holder • Programme-controlled lower tool displacement (i-axis) for 2 positions • Modern protective cover Machine Benefits Technical Machine Benefits • Oil cooler • Working width 2. 000mm Extra Information Special Equipment: Back gauge system 4 axes (X, R, Z1, Z2) Hydraulic and hardened upper tool clamping (Wila system) Hydraulic lower tool clamping (Wila system) CNC crowning BendGuard safety device 2 pcs. Support brackets Network Ledpjx D Nkdefx Akqjhf No tools included

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, stroke length: 215 mm, controller manufacturer: Delem, working width: 1,280 mm, bending force (max.): 50 t, control type: CNC control, number of axes: 4, Equipment: CE marking, foot remote control, Used Trumpf Trumabend V 50 Hydraulic cnc 50ton x 1.2metre Press Brake For Sale Brand: Trumpf Type/Model: Trumabend V50 Year:2000 Trumabend V 50 Ljdpex Nip Hsfx Akqohf Technical details Capacity: 50ton x 1.2metre: Full bed length: 1280 mm CNC Brand: Delem Total axis: 4 Y1, Y2, X and R Axis

Condition: used, Year of construction: 1998, total length: 3,350 mm, total width: 2,180 mm, total height: 2,780 mm, Weight: 9.000 kg Price: On request Lhjdpfx Asyrpvkokqef - Year: 1998 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 230 - Drive system: Conventional - Power [kW]: 11.0 - Number of axes [pcs]: 3: Y1+Y2+X - Press force [ton]: 160 - Max. working width [mm]: 3100 - Column gap [mm]: 2550 - Crowning system: None - Punch holder: Quick-release - Tool holder type: European-style - Tools included: Yes - Options: Digital readout - Transport dimensions: 3350mm x 2180mm x 2780mm (l x w x h) - Transport weight [kg]: 9000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1992, functionality: fully functional, For sale is a used press brake from Helmut Lotze Werkzeugmaschinen. The machine is sturdily constructed and ideally suited for versatile bending tasks in metal and steel fabrication. Ljdeym Axujpfx Akqshf Technical data: Pressing force: 150 t Working length: 3,500 mm The press brake is fully operational, powered up, and can be inspected at any time by prior arrangement. If you are interested, we look forward to your inquiry to schedule a viewing or for further information.

Condition: used, pressure 60T t chamfer lenght 2000 mm distance between columns / mm height of stroke / mm work feed / mm/s control / Lsdpfjylz Dyex Akqehf total power requirement / kW weight of the machine ca. / t