Markl Bavaria 40/8 Isobarometric Filler (2019)

Markl Druckfüller

Condition: used, Year of construction: 2021, Overview  This isobarometric filler was built in 2021 by the German manufacturer Markl. It can fill cans abd glass bottles. This filler is available because the seller is selling the complete equipment. It has only a few operating hours and can be viewed in person at any time.   Technical Details  Type: Isobarometric filler for bottles and cans Capacity: 8,000 bottles / hour (depending on format) Number of filling valves: 20 Formats:  Bottles: 0.33 L Longneck and 0.75 L Cava Cans: Standard 0.33 L and 0.44 L Counter-pressure filler Running direction: left - right Dimensions (L x W x H): 2.0 m x 1.8 m x 2.5 m Operating History: In operation: June 2021 – June 2024 Last production run: June 2024 Dismantled: February 2025 Estimated total working hours: approx. 625 hours (~500,000 liters filled at 2,500 units/hour) Good condition, ready for reinstallation Kodpfjt Rmhmsx Agzjnf

Condition: good (used), Year of construction: 2017, functionality: fully functional, LINEAR PET BLOWING MACHINE SET with auxiliary equipment AC ARCOR - multiBlow2 - 2017 Speed: 1,5L - 6000 Cavities: 4 Formats: 0,1 - 3,0L Ksdpfx Ajquuvrsgzsnf AUXILARY EQUIP 1. Chiller - M.T.A S.p.A - TAE EVO 051 2. LOW Pressure compressor - SHAMAL 45kw 3. High Pressure compressor - KAESER Booster N 753 - G 13 bar / 40 bar" 4. Air Dryer 5. Receiver tank - Low pressure - MAX 16Bar 6. Receiver tank - High pressure - MAX 45Bar

Condition: ready for operation (used), Year of construction: 2008, A SIG Corpoplast blow molding machine is available. Output: 21600 bottles/h, bottle formats: 500ml/750ml/1000ml/1500ml, max. blowing air pressure: 40bar, dimensions X/Y/Z: approx. 7000mm/4300mm/3100mm, weight: approx. 20000kg. Including preform feeder Transver AG, year of construction: 2008, silo, elevator, sorting and chute. Documentation available. On-site inspection is possible. Knodpfx Agot Eu Azjzef

Condition: like new (used), Year of construction: 2019, operating hours: 10,000 h, functionality: fully functional, water tank capacity: 10,000 l, Complete mineral water and soft drink production plant for sale, available with brands, staff, or standalone. The production line features a mixed configuration, allowing both glass and PET bottle products to be manufactured on the same line. Ksdpoxm Rmxsfx Agzsnf The machine list is available in the documents along with information about the company. The machines have seen little use since 2019 and remain in good condition.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, For sale: (VIDEO available on request) MARKL / BAVARIA bottling line for breweries & beverage industry, suitable for 0.5 l & 0.33 l bottles Output: 3,000 – 15,000 bottles/h Bottle filling and capping machine for crown caps d = 26 mm with pre-evacuation system Kodpfx Agowqz Nnjzonf Bottle types: 0.5 l NRW, 0.5 l long-neck, 0.5 l Warsaw, 0.33 l long-neck Additional detailed technical data: see PDF Machine is immediately available, removed from production only about 2 months ago.

Condition: new, Year of construction: 2025, operating hours: 20 h, functionality: fully functional, power: 36 kW (48.95 HP), We are offering our Kreuzmayr Chamber Pasteurizer KKP 360, with 2 trolleys for bottle or cans. Our current production capacity requires us to upgrade to a tunnel pasteurizer, so we are offering our chamber pasteurizer for sale. Currently they are in use at our co-packing factory. The chambers are electrically heated, with startup power requirement of 36 kW. We pasteurize around 1.000 cans per hour per chamber. The chamber is available for shipment from March-2026. We can offer shipment and delivery to any country. Knsdpfx Ajxp Ukyjgzjf Please feel free to inquire for more information.

Condition: used, Year of construction: 2014, functionality: fully functional, Beer bottling line Speed: 2,000 Bph Line composed of: BORELLI monoblock Year: 2014 Direction of travel: clockwise 12-pincer rinser Nozzle type: fixed Number of treatments: water and inert gas 16-valve filler Filling type: isobaric Pre-evacuation Degassing Single-head capper for crown cap Knodpfjv Hrcxjx Agzof Cap size: 26 mm TEKNINOX pasteurization tunnel Year: 2014 Pasteurization temperatures: pre-pasteurization and pasteurization managed by PLC ENOS labeler Year: 2014 Type of labels: linear with 2 stations Type of applications: Label and Back label on the same reel Collar Close SIAT cartons Year: 2014 Belt type both above and below PARMAMET clusterer Year: 2007 Format: 33x3 Accident prevention guards BELTS NOT INCLUDED Code: NP 578

Condition: used, Year of construction: 2007, Used Filling Monoblock Cimec America The Used Filling Monoblock Cimec America model DPS 6/6/1C is an advanced isobaric bottling solution designed for the precise rinsing, filling, and capping of carbonated beverages. Engineered with industrial-grade stainless steel and based on a robust mechanical architecture, this monoblock is tailored for small to medium-sized beverage operations seeking reliability, hygiene, and consistent process control. This CIMEC monoblock integrates three essential stations into a compact, fully automatic system. The configuration includes a bottle rinsing unit, an isobaric filling carousel, and a crown capping station, all enclosed within stainless steel safety guards with transparent access doors for operational monitoring and safety compliance. Knedpfx Agsw Hr Awszef Isobaric Filling Technology and Construction At the heart of the Used Filling Monoblock Cimec America is its isobaric filling carousel, specifically engineered for carbonated liquids such as beer, sparkling wine, kombucha, cider, and similar beverages requiring careful handling to preserve carbonation and minimize product loss. The filling station features stainless steel isobaric valves connected to a pressurized product tank, ensuring precise equalization between the internal bottle pressure and the product tank before the filling cycle begins. The isobaric filling method is characterized by maintaining a constant counter-pressure using CO₂ or other inert gases. This technology allows the product to enter the bottle under pressure, minimizing the formation of foam and the risk of de-gassing, which is critical for carbonated drinks. Filling is performed at a controlled rate, typically using a “level” principle where the filling valve shuts off when the liquid reaches a predefined height within the bottle, guided by dedicated overflow tubes. All product-contact surfaces are manufactured from high-quality AISI 304 stainless steel, ensuring full compliance with sanitary standards required in the food and beverage industry. The filling station is equipped with pressure gauges and safety valves, allowing for fine-tuned process adjustments and safeguarding both the operator and the product. The system accepts a range of bottle sizes from 0.22 liters up to 1.5 liters, providing operational flexibility for various production formats. Changeover between bottle sizes is managed manually, with adjustable guides and supports. The monoblock is configured for crown cap application (26 mm diameter), using a dedicated capping turret with mechanical sorting and feeding of the crowns. The design enables precise and secure sealing, vital for maintaining carbonation and product integrity. Automation, Utility Requirements, and Operational Safety This Used Filling Monoblock Cimec America operates as a fully automated rotary triblock, requiring minimal manual intervention during normal production cycles. Mechanical synchronization ensures seamless bottle transfer between stations, supported by motor-driven conveyors and rotary starwheels for accurate positioning throughout rinsing, filling, and capping.

Condition: used, Year of construction: 2016, Overview This filler was manufactured in 2016 by CIMEC and comes with an Arol crown capper. The filler has an output of 1,800 bottles per hour, processes bottle sizes from 0.33 l to 0.75 l and is in very good condition. The machine can be viewed in person at any time. Technical details  Filler | CIMEC | AM DPS 9-8-1C | 2016 Output: 1,800 bottles/hour Number of rinsing nozzles: 9 Number of filling valves: 8 Bottle sizes included: 0.33 l - 0.75 l (with other set also 0.5 l) Electrical power: 6 kW, 400V, 50Hz Dimensions Width: 1,400 mm Length: 3,200 mm Complete length with labeler: 8,800 mm Operating hours: 1,370 hours Complete documentation available Capper | Arol | TSI-Eagle C | 2016 Pitch diameter: 410 mm Number of heads: 1 Type of closure: Standard crown cork Complete documentation available Kjdpfx Aevy D Adjgzsnf

Condition: used, Used PET Krones Complete Bottling Line CSD Sparkling Water 16000 bph 1.5 L Advanced PET Bottling Solution for Carbonated Beverages This used PET Krones complete bottling line delivers a fully integrated, high-capacity solution for bottling carbonated soft drinks (CSD) and sparkling water in 1.5-liter PET bottles. Engineered for performance and reliability, the line seamlessly combines blow molding, filling, labelling, packaging, and palletizing technologies to achieve a throughput of up to 16,000 bottles per igned for versatility, it can accommodate various bottle shapes and provides a robust platform for industrial beverage production across a wide range of carbonated products. At the core of the line is the Krones Contiform stretch blow molding system (S16), equipped with an automatic preform feeder and an integrated chiller. This system ensures precise and consistent bottle forming, maintaining high-quality standards throughout the production run. An air conveyor, specifically designed by Krones, efficiently and gently transfers empty PET bottles from the blow molder directly to the labelling and filling stations, minimizing the risk of deformation or contamination. Integrated High-Speed Filling, Labelling, and Quality Control After bottle production, the Krones Contiroll labeller applies wrap-around labels to the empty PET bottles with high precision. The labelling station supports high-speed operations, ensuring perfect label placement for consistent branding and shelf impact. Immediately downstream, the Krones Mecafill isobaric filler, specifically engineered for carbonated beverages, ensures uniform fill levels, stable carbonation, and effective foam control. This filler is also equipped with a metal detector at the outfeed, providing essential quality control by detecting and rejecting bottles containing metallic contaminants. The process section of the line features a Krones Mixer, responsible for the accurate preparation and blending of water and beverage syrups for both still and carbonated drinks. This equipment manages CO₂ dosing, degassing, and temperature control, guaranteeing product consistency and carbonation quality. For product traceability and regulatory compliance, a Hitachi RXS-SD160W inkjet printer marks each bottle with batch codes and expiry dates. Kedpfx Asw Hm Nfogzsnf Comprehensive Secondary Packaging and End-of-Line Automation Following filling and capping, bottles are conveyed by Krones transport modules to the secondary packaging area. In this section, a Krones Variopack shrink tunnel collates bottles and wraps them into stable packs, with a throughput of up to 45 packs per minute. For packaging formats requiring cardboard supports, a Twin Pack MDE INOX single-lane handle applicator provides ergonomic handling and secure pack er packaging, Krones conveyors move the packs to the palletizing area, where a Kettner Pressant Universal palletizer arranges them onto pallets with precise stacking patterns, suitable for different pallet types and bottle formats.