Tilting spindle moulder

Martin T26

Condition: excellent (used), Year of construction: 2000, Robust swiveling milling machine T 26, swiveling from -45 to +45 degrees Reversible drive motor 5 / 6kW with automatic motor brake R/L rotation Swiveling angle from -45 to +45 degrees, electrically adjustable Height adjustment max. 150mm, electrically adjustable When the height is adjusted, the correction factor for the swiveling angle is displayed in the upper display, which can then be set on the stop, allowing settings to be realized according to drawings. Four speeds: 3000, 4500, 6000 and 9,000 rpm Spindle diameter 30mm, quick-change spindle with torque wrench Comfort stop T226 with digital displays for total adjustment and infeed fence individually, as well as input of the cutter diameter, with automatic calculation of the cutting depth. Stop with lifting device, swiveling away (for curved milling work) Table extension on the right and left with extendable workpiece support Support can be extended by 700mm Table length approx. 2400mm Folding stop for plunge milling Workpiece clamping device Aigner Centrex Original Martin cast iron table top, left 500mm, right 500mm with two insertion guide rails 3-roller feed HolzHer ET117, with 8 speeds, R/L rotation, new rollers Feed connection, switchable from the control panel Comfort stand with electrically height-adjustable feed support, which can be swiveled away for machine setup and then easily locked back into place. Dust extraction port 2 x 120mm Compressed air connection 6 bar Emergency stop switch Some parts of the machine have been newly painted (special color RAL1015) V-belt renewed Operating manual CE marking Dimensions approx. 3000 x 1500 x 1830mm (LxWxH). Weight approx. 1800kg. Hjdpfx Abjzbm Tfovsnn The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration and are stored in our warehouse, see "other offers from this provider".

Condition: excellent (used), Year of construction: 2005, machine/vehicle number: V 453572, functionality: fully functional, operating hours: 1,770 h, power: 6 kW (8.16 HP), input voltage: 400 V, input current: 19 A, input frequency: 50 Hz, type of input current: AC, spindle diameter: 30 mm, pivoting range: 90 °, rip fence adjustment: motor-driven, actuation type: electric, rotational speed (max.): 9,000 rpm, rotational speed (min.): 3,000 rpm, table width: 900 mm, table length: 2,405 mm, total length: 3,000 mm, total width: 1,260 mm, total height: 1,800 mm, overall weight: 1,300 kg, year of last overhaul: 2026, Equipment: CE marking, Martin T26 DuoControl Spindle Milling Machine 5/6 kW (6.8/8.2 hp) - 400 V, 50 Hz with neutral conductor in CE configuration with 2-axis control for spindle height and milling fence, electromechanical swivel adjustment with digital display, incl. swiveling control panel with safety device type CPS Gamma V *with milling arbor 40 mm / 160 mm length //Table size: 2405 mm x 900 mm //Table height: 900 mm //Table openings: electric 70 mm - 220 mm //Weight: 1300 kg //Speeds: 3000/4500/6000/9000 rpm with belt quick-change system //Displays: electric speed display Digital (LED) for spindle height (absolute and relative) and swivel angle automatic display of the correction value for the milling depth Dual operating hour counter for total and batch run time //Milling spindle: electrically swiveling via push button +/- 45.50° electrically adjustable in height with rapid and creep feed, with steep taper SK 40, Dornfix quick-change system incl. torque wrench wear-free, electrically braked Electro-pneumatic locking via selector switch //Spindle stroke: 150 mm at 5/6 kW and 7.5 kW, 125 mm //Milling fence: Aigner integral fence Milling jaws made of aluminum, hard-coated, with mounts for groove board or guide strip Handwheel adjustment with mechanical digital counter Infeed jaw adjustable separately Maximum WZ diameter 250 mm //Extraction: Extraction port 120 mm diameter on the milling fence Extraction port 120 mm diameter under the table //Maintenance equipment Central lubrication via pump Lubrication of the milling spindle via grease volume regulator 1 x open-end wrench 1 x torque wrench for Dornfix system 1 x oil pump 1 x grease pump filled with long-life grease 1 x ball bearing for guide ring 62 mm 1 x arc milling guard FRS95 for milling operations on the guide ring, with extraction port and feed strip Hedpezamwuofx Abvsnn //Electrical equipment: Lockable main switch, automatic star-delta start, electric brake wear-free Contact for controlling the extraction, undervoltage protection, CEE torque connection for feed unit (= 5-pin socket) Operating push button for direction of rotation selection, motor circuit breaker and winding protection BG test certificate No. 991002 GS wood dust tested No. 991001 EC type-tested No. 991003 Additionally: 1 x Electrically adjustable table opening 1 x Support for feed unit mount, swiveling with motorized height adjustment with control panel 1 x extendable table extension