Band saw

MEBA 230 GHA

Condition: used, Year of construction: 2001, Deckel Maho DMC 60U Hi-dyn Machining Center Condition: Used Year of manufacture: 2001 Operating hours: 56,376 Spindle hours: 26,451 Technical specifications: Travel X/Y/Z: 600 / 700 / 600 mm Motor power: 15 kW (40% duty cycle); 10 kW (100% duty cycle) Spindle speed: 18,000 rpm Tool holder: SK 40 Lsdpfxju Rnluj Ab Tohc Magazine positions SK 40: 60 Equipment: - 3D path control MillPlus IT - Horizontal double-arm tool changer - Automatic swivel milling head - Rotating safety glass - NC rotary table with pallet carrier - Rotary pallet changer - 2 pallets 630 x 500 mm - Universal milling head with controlled B axis SK 40 (only in combination with SK 40 motor spindle) - Tool holder for HSK-A63 according to DIN 69893 - Electronic handwheel - Operating mode 4 extended manual intervention - Rinse gun with pump - Tool breakage control SK 40 mechanical version, range: 63...310 mm / +/- 3 mm - Intermittent chip conveyor operation - Internal coolant supply switchable from 40 bar to 80 bar

Year of construction: 2002, condition: good (used), Make: Matsuura Type: LX-O Control: YASNAC Year: 2002 Specifications Metric US Standard X - Travel 330 mm Y - Travel Lhjdpfx Abolz Rvls Tec 300 mm Z - Travel 250 mm Table Length 540 mm Table Width 320 mm Table load 100 Feed rate X-Axis 90000 mm/min. Feed rate Y-Axis 90000 mm/min. Feed rate Z-Axis 90000 mm/min. Spindle Taper 30 ISO/Bt/Mk Power on spindle 7.5 kW Speeds / ranges 40000 Rpm ATC / revolver 30 Chip conveyor Yes Dimensions (Estimate) Length 2800 mm Width 2600 mm Height 28000 mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 2023, condition: new, IMMEDIATELY AVAILABLE ! Vibratory finishing machines with separator The machines of the series VKUE can be used for the surface treatment of Lhsdpen Smclsfx Ab Tsc metallic and non-metallic workpieces. These machines have a large sieving surface and allow easy separation of the workpieces from the abrasive bodies. Optional accessories - Pneumatic sound flap - Pneumatic damper control - Frequency control - Metering pump - Magnetic valve - Stand for control panel - Flushing tube (different types) The pictures are for orientation only. The optional accessories are available additional charge.

Condition: used, Year of construction: 2012, x-travel 630 mm y-travel 800 mm z-travel 750 mm control SIN 840D sl Siemens B - axis 360 x 0,001 ° A - axis -200 -- +25 x 0,001 ° spindle turning speed - stepless 20 - 18.000 U/min power capacity at 100 % load 28,00 kW power capacity at 40 % load 34,00 KW max. torque at 40% / 100% load 110 / 84 Nm tool taper HSK 63 feed X/Y/Z/-axis 1 - 100.000 mm/min rapid traverse X/Y/Z 100,00 m/min feed capacity X/Y/Z 9 / 6 / 9 kN Lhodpjvxwxvsfx Ab Tjc feed B-axis 1 - 14.400 °/min feed A-axis 1 - 7.200 °/min size of pallet 2x 500 x 500 mm workpiece weight max. 400 kg max. workpiece diameter 800 mm workpiece height max. 800 mm tool magacine with 63 diameter of tools max. 280 mm tool length - max. 550 mm weight of tools max. 15,00 kg total power requirement 65,00 kW weight of the machine ca. 14,00 t dimensions of the machine ca. 5,50 x 3,50 x H3,20 m 5-axis machining center with SIEMENS SINUMERIK 840D sl control, mechanical tool breakage control, emulsion mist separator, without chip conveyor and without coolant system.

Condition: used, Year of construction: 1981, cutting diameter 250 mm dimensions of saw-band 3505 x 25 x 0,95 mm table height 450 mm cutting speed 10 - 110 m/min total power requirement 3 kW weight of the machine ca. 1,1 t dimensions of the machine ca. 2,0 x 2,2 x 1,4 m Lhodpfx Asv Ehfaob Tsc Fully automatic band saw - including chip conveyor

Condition: used, TECHNICAL DETAILS - Number of axes : 5 - Distance between tips : 400 [mm] - Effective diameter : 180 [mm] Lhodovxw A Ujpfx Ab Tjc LINEAR AXES - X1 and X2 x Z travel : 220 [mm] - Z travel : 850 [mm] - X x Z resolution : 0.0001 [mm] TURRET : - Number of fixed positions : 12 - Tool holders : VDI30 WHEEL CARRIER - Right-hand external grinding : * Grinding wheel dimensions (Ø x width x bore) : 400 x 50 x 127 [mm] * Drive power : 6.8 [kW] WORKPIECE CARRIER - Max. speed : 7500 [rpm] - Speeds (synchronous operation) : 1 - 5000 [rpm] - Taper type : CM4 - Drive power : 10.5 [kW] - C axis : 0.001 [°] SYNCHRONIZED COUNTER SPINDLE - Max. speed : 7500 [rpm] - Rotational speeds (synchronous operation) : 1 - 5000 [rpm] - C axis : 0.001 [°] - Inner cone : MK4 - Micrometric adjustment : +/- 40 [microns] - Drive power : 10.5 [kW] POWER SUPPLY - Power rating : 45 [KVA] DIMENSIONS - Floor dimensions : 2800 x 3960 [mm] - Machine weight : 7600 [kg] MACHINE HOURS - Powered hours : 57000 [h] EQUIPMENT - NC FANUC 310i-modelA - Software Studer WIN - RS232 / USB interface - Remote electronic handwheel - Turret with Renishaw LP2 length self-calibration device - Marposs feelers for diameters (multirange) + Z4 axes for positioning - Semi-automatic wheel balancing MPM.3 BMT100 M.24 - 480 L coolant tank * with paper filter * with magnetic filter - Chip conveyor - Fog extraction - Cooling unit for grinding wheel motor cooling - Electronic contact detection Dittel AE6000 - Fixed dressing device on workhead - Electrical cabinet air conditioning - Balancing shaft - Interface for automatic loading system

Condition: good (used), Year of construction: 2006, Hurco machining center VMX 30 with Kitagawa 4th axis, through-spindle coolant (IKZ), NC vise 125, various tool holders, well-maintained condition Lhedpfxjxrcnlo Ab Tec

Condition: used, Year of construction: 1977, cutting diameter:250 mm band length:450 mm cutting speed:50/70/100/135 Hübe/min range L-W-H:2,6 x 1,8 x 1,1 mm total power requirement:3,8 kW Lhedpfecxxw Usx Ab Tsc weight of the machine ca.:1,2 t

Condition: used, Year of construction: 1993, cutting diameter 260 mm cutting width 400 mm capacity 90 degrees: flat 400 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: round 260 mm band speed 17 - 110 m/min engine output 3,5 kW dimensions of saw-band 3830 x 25 x 0,9 mm Ljdpfx Abov T Nrks Tehc weight of the machine ca. 1,3 t dimensions of the machine ca. 2,1 x 2,0 x 1,6 m High-performance fully automatic band saw with - coolant system - documentation

Condition: good (used), Please read the technical specifications in full. If this machine is a potential investment for you, we kindly request that you provide your complete credentials, including a valid telephone number and email address, in order to receive an offer. DECKEL Milling Machine – Toolroom Milling Machine DMU 35 M 3 x 2-axis CNC Milling Machine Equipped with SIEMENS 810 D – ShopMill Software Year of manufacture: 2001-2003 Lhsdoxz Rdaepfx Ab Toc Travel ranges (X/Y/Z): 350 x 240 x 340 mm Stepless spindle speed: 20 – 6,300 rpm Spindle taper: SK 40 DIN 69871 Drawbar: DIN 69872 Drive power: 6.3 / 10 kW (100/40% duty cycle) Torque: max. 55/80 Nm Universal swivel/rotary table: 400 x 290 mm Table load capacity: 100 kg Spindle nose/table distance: min./max. 145/485 mm Feed rate: 3,000 mm/min Rapid traverse: 5,000 mm/min Input resolution: 0.01 mm Rotary range: 360 degrees Swivel range: degrees Total power requirement: kVA Weight: approx. 1750 kg Technical data subject to change! Accessories/Equipment: - Direct path measuring system for 3 axes - Spindle drive via servomotor with toothed belt - 2 gearbox speed ranges - Full enclosure with sliding door - Swiveling control panel - Coolant nozzles on the vertical head - Coolant system - Chip tray with coolant tank - Electronic handwheel - Machine levelling feet - Machine lamp - Serial interface RS232C, LAN (RJ45) This machine is perfect for prototyping, toolmaking, training, mechanical workshops, gunsmiths, etc. It stands out for its versatility, featuring an additional manually operated rotary-swivel table, which allows 5-sided machining. Available from March 2026. A total of 3 machines available. Condition: good to very good, from a vocational training institute – see photos.