Band saw

MEP Shark 320CNC FE

Condition: excellent (used), Year of construction: 2012, Technical Data: Hsdpfxox Ii Hve Ac Ter Working width: 2600 mm Bending capacity: 20.0 mm Pre-bending: 16.0 mm Top roll diameter: 330 mm Middle roll diameter: 300 mm Side rolls diameter: 240 mm Conical bending device via tilting of both side rolls Mobile control panel with digital display Motor power: 11 kW CE mark Dimensions (L x W x H): approx. 5800 x 2300 x 1900 mm Weight: approx. 11 t Additional equipment: Upper bending aid The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: good (used), Year of construction: 1962, High speed radial drilling machine, radial drilling machine, drilling machine, boom drilling machine, high speed radial drilling machine -Clamping table: 400 x 1100 mm -Projection: 930 mm -Taper mount: MK4 -Engine power: 1.35/1.8 kW Hedpfx Asirax Uoc Tsr -Speed: 41-1700 rpm -Columns: Ø 200 mm -Spindle stroke: 125 mm -Thread cutting device: YES -Feed: 0.075 - 0.3 mm/rev -Dimensions: 1800/1235/H2240 mm -Weight: 1500kg

Condition: good (used), NHH lathe Turning diameter bed: 260 mm Turning diameter support: 160 mm Spindle bore: 26 mm Turning lenght: 600 mm Heidenhain digital measurement Diameter faceplate: 155 mm Speed: 2000 RPM Dimensions: 150x85x155 cm LxWxH Hodpfjmw Ukcex Ac Tor

Condition: used, Year of construction: 1992, sheet width 2050 mm plate thickness 10.0 mm ST pre-bending 8.0 mm ST diameter of upper rolls ~ 205 mm side roll diameter ~ 195 mm Control konv. oil volume 80.0 Liter Hsdpfxsxacdvj Ac Ter voltage 380 V total power requirement 5.5 kW weight 3200 kg range L-W-H 4500 x 1500 x 1300 mm Features: - Robust electro-hydraulic 3-roll bending machine - 3-roll concept offers a wide range of bending and rounding options - Pivoting control unit at the front * Operation - Control of all rolls and machine axes * Digital position display * Manual operation via joysticks - Diameters of up to 1.1 times the top roll diameter are possible - Forged and hardened rolls with a hardness of 53-55 HRC - Low-maintenance, stable machine design - Sturdy welded steel construction - Electro-hydraulic folding bearing for easy pipe removal - Pressure gauge / pressure indicator for the rolls - Safety device (safety lanyard with switch unit) - Operating instructions (PDF)

Condition: used, Year of construction: 2003, Technical details: Hedju Idhyopfx Ac Ter bore capacity in steel (diameter): 25 mm throat: 255 mm bore stroke: 140 mm spindle taper MT: MK 3 spindle speed:: 105 - 2980 / 8step U/min Distance spindle/table max.: min.: 350 / max.: 950 mm table clamping surface:: 420 x 270 mm table rotating: 360 ° table swivable approx.: 30° links / rechts drill table adjustment: 600 manuell mm column diameter: 100 mm current- max.: 400 V / 50 Hz A total power requirement: 0,9 kW weight of the machine ca.: 180 kg dimension machine xH: 0,6 x 0,5 x 1,8 m Equipment: Röhm quick-action chuck 3 - 16mm Switchover for clockwise/anticlockwise rotation for thread cutting *

Condition: excellent (used), Universal Milling Machine Schaublin 53N Manufacturer: Schaublin Model: 53 N Table size: 1100 x 255 mm T-slots: 4 T-slot width: 14 mm T-slot pitch: 50 mm Longitudinal travel: 700 mm Longitudinal travel for spiral milling: 550 mm Vertical travel: 430 mm Cross travel: 250 mm Feeds, longitudinal/cross: 12 to 1000 mm/min Feeds, vertical: 6 to 500 mm/min Rapid traverse, longitudinal/cross: 3500 mm/min Rapid traverse, vertical: 1750 mm/min Spindle speeds: 18 steps, 38 to 1500 rpm Spindle taper: VSM 33831 Size 44 Collet chuck: P25 Main drive power: 4 HP Main drive speed: 1425 rpm Machine weight: 1650 kg Space requirement: 226 x 172 x 165 cm Hodoyxgyhopfx Ac Tjr No guarantee is given for the accuracy, completeness, or timeliness of this information.

Condition: new, cutting diameter 305 mm Hjdpfx Aceu Dbvto Tsr saw band length 3375 mm cutting width 350 mm dimensions of saw-band 3375 x 27 x 0,9 mm 305 mm 260 mm 350 x 200 mm 250 mm 230 mm 230 x 200 mm 175 mm 155 mm 170 x 100 mm total power requirement 1,5 / 1,8 kW weight of the machine ca. 0,7 t dimensions of the machine ca. 1,5 x 1,8 x 1,9 m

Condition: used, functionality: fully functional, power: 85 kW (115.57 HP), fuel type: diesel, empty load weight: 7,700 kg, lifting height: 6,900 mm, mast type: telescopic, Year of construction: 2022, operating hours: 345 h, total length: 4,970 mm, construction height: 2,380 mm, fork length: 1,200 mm, drive type: Diesel, load capacity: 3,300 kg, construction width: 2,390 mm, Rigid telescopic forklift Mast type: Telescopic Speed class: 20 Technical condition: very good Front tires Type: Pneumatic Front tires Size: 500 80 24 Front tires Condition: 80 - 100% Rear tires Type: Air Rear tires Size: 500 80 24 Rear tires Condition: 80 - 100% Hsdpfx Acju Dyfts Tjr Description: Are you looking for an efficient, powerful and comfortable machine? Then the MLT 733 with at least 115 HP, the telescopic handler designed for agricultural transport work with a lifting height of 6.88 m and a lifting capacity of 3.3 t, is made for you! Top priority comfort: This machine is characterized by a completely new, easily accessible cab with optimum visibility, the JSM® (Joystick Switch and Move) with adjustable armrest, DSB (Double Switch Buttons) and sound insulation ideal for long working hours. Top priority performance: With this telehandler, you can achieve exceptional results thanks to the 115 hp Deutz engine and torque converter transmission. Its self-locking differential, 41 cm ground clearance and automatic spiral fans are perfectly adapted for agricultural use. Top priority efficiency: The MLT 733 with at least 115 hp is equipped with a variable displacement pump (up to 150 l/min) 3rd valve, rear working lights, front working lights, air conditioning,

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 1,390 h, load capacity: 3,300 kg, lifting height: 6,900 mm, fuel type: diesel, mast type: telescopic, construction height: 2,380 mm, power: 75 kW (101.97 HP), fork length: 1,200 mm, empty load weight: 7,700 kg, total length: 4,970 mm, drive type: Diesel, construction width: 2,390 mm, Rigid telehandler Mast type: telescopic Speed class: 20 Technical condition: good Front tyres type: pneumatic Front tyres size: 500/80-24 Front tyres condition: 80–100% Rear tyres type: pneumatic Rear tyres size: 500/80-24 Rear tyres condition: 80–100% Hjdsyfivkopfx Ac Tsr 3rd valve,

Condition: good (used), Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring machine, T-slot plate, pallet changer Hsdpjgvm D Hsfx Ac Tsr -T-slot plate: clamping plate -Width: 1000 mm -Total length: 7060 mm, clamping area 6260 mm -Plate height: 235 mm -Groove width: 22 mm -Groove spacing: 125 mm -Dimensions: see drawing in the photos -Transport dimensions: 7060/1000/H235 mm