Centerless grinding machine

Microrex 1H

Condition: ready for operation (used), functionality: fully functional, grinding wheel width: 100 mm, grinding wheel diameter: 350 mm, overall weight: 2,000 kg, The machine was retrofitted and modernised in 2025. The modernisation includes the addition of automatic loading and automatic cycle functions. The user interface and control panel are available in English, German, and French. TECHNICAL DETAILS Grinding wheel dimensions (outer diameter x inner diameter x width): 350 x 127 x 100 mm Grinding wheel width: 100 mm Grinding wheel speeds: Infinitely variable Regulating wheel speed: 10 - 250 rpm Feed: Automatic Regulating wheel dimensions (outer diameter x inner diameter x width): 230 x 76.2 x 100 mm Regulating wheel width: 100 mm Maximum length to be straightened: 200 mm Tedsyym Emspfx Adwoc Workpiece diameter to be straightened: 1.5 - 50 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,800 x 1,300 x 1,600 mm Weight: 2,000 kg EQUIPMENT New coolant tank with paper filtration system

Condition: used, mileage: 19,950 km, first registration: 11/1989, fuel type: diesel, axle configuration: 4x4, gearing type: mechanical, Year of construction: 1989, Equipment: all wheel drive, Mercedes-Benz 1428 AF 4x4 (central and rear axle locks, low-range gearing) with 7 seats Tjdpfx Aofarx Uodwjc Water tank: 2,500 liters Pump: Metz, with a flow rate of 2,800 l/min Additional equipment: quick attack connection on the right side with a 50-meter hose Dimensions (LxWxH): 7100 x 2300 x 3000 mm Wheelbase: 3800 mm Tires: 275/70 R22.5

Year of construction: 1988, condition: used, machine/vehicle number: 103.071.3156.78192, disk of circular saw-Ø: 400 u. 425 mm cutting area at 90° round: 130 mm Todpjz N Amefx Adwec cutting area at 90° square: 120 x 120 mm cutting area in mitre at 45° round: 130 mm cutting area in mitre at 45° square: 110 x 110 mm cutting speeds: 11 u. 22 m/min forward feed speeds: 670 mm/min cutting length: m. automat. Vorschub bis 1200 mm electrical connection: 380 V, ca. 4 kVA V sawing drive: 1,6/2,5 kW space needed: 1800 x 3800 x 2000 mm weight: ca. 1800 kg

Condition: ready for operation (used), Year of construction: 2018, operating hours: 18,845 h, spindle speed (max.): 4,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 53 mm, travel distance Z-axis: 830 mm, spindle motor power: 33,000 W, controller manufacturer: SIEMENS, controller model: 828D, number of axes: 3, This 3-axis DOOSAN Puma 2600 SY II was manufactured in 2018, designed for precision in horizontal turning. Ideal for complex machining tasks, this machine ensures robust performance and durability. If you are looking to get high quality turning capabilities consider the DOOSAN Puma 2600 SY II machine we have for sale. Contact us for more information. Additional equipment • Mekiload Gantry Loader • Renishaw Equator Todpsyr R A Eefx Adwoc • Renishaw Equator • Machine includes a rotary indexing magazine • Machine includes a gantry robot Machine Benefits Qualitative Machine Benefits • Tool change time: 1. 0 second • Max speed (station): 5000 rpm • Holder for turning tools: 25 x 25 mm • Holder for boring bar: Ø50 mm • Coolant pump capacity: 1. 5 kw Technical Machine Benefits • Max. Turning diameter over bed: 780 mm • Max. Turning diameter over slide: 630 mm • Max. Turning length: 760 mm • Main spindle torque: 719 nm • Spindle mount (main): a2 #8 • Sub spindle speed: 6000 rpm • Sub spindle power (30 min): 18. 2 kw • Sub spindle torque: 220 nm • Spindle mount (sub): a2 #5 • Number of stations: 24 (12 driven) Extra Information Machine still under power

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, degree of automation: automatic, laser type: fiber laser, laser power: 3,000 W, warranty duration: 24 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Working Area (mm): 3048×1524 X-Axis Travel (mm）: 1524 Y-Axis Travel(mm）: 3048 Z-Axis Travel（mm）: 80 X/Y Axis Positioning Accuracy: ≤0.03mm/m X/Y Axis Repositioning Accuracy: ≤±0.02mm Maximum Synthetic Positioning Speed: 150m/min Maximum Acceleration: 1.2G Cutting Slit Width: 0.1mm-0.5mm (measured for platesless than3mm thick) Cutting Surface Roughness: Ra3.2um-Ra25.4um(measured for plate thickness below3mm） Floor Size(mm): 6000*3000 Mainframe Dimension(mm): 5000*2300*1800 Screen Size: 21"LCD TransmissionMode: Rack andpinion dual drive Table Loading Capacity: 1.1(ton) Tjdpfx Aoxvwcxsdwoc

Condition: used, Year of construction: 1996, Technical details: grinding diameter: 1,5 - 75 mm grinding wheel diameter: 400 mm grinding wheel width: 160 mm work stroke: 0 - 1 mm working feed: stufenlos/ continous mm/min grinding wheel speeds: 1300 U/min control for program: Num 1020 GC total power requirement: 14 kW weight of the machine ca.: 3,8 t dimensions of machine: 3,0x2,2x2,2 m dimensions electric cabinet LxWxH: 1,5x0,4x2,0 m Tsdpsu Ngyzofx Adwjc CIRCULAR GRINDING MACHINE - alloyed round steels as well as (grooving process) throughfeed process. - In the plunge process, the plunge-cut length is max. 160mm. - Workpiece removal automatically via rail (its function or operation is not known to WMW AG) - grinding wheel with reshaping device, speed = 1300 rpm. - regulating grinding wheel with reshaping device, infeed angle right 0-6° and left 0-2°; wheel size 280x160mm - automatic grinding wheel balancing system accessories: various grinding and regulating wheels on request The machine is operating in manual mode! The control is in the Catalan language and none of our employees can control the machine or understand the language. *

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, We offer you: Manufacturer: INDEX Type: MS40-6 C Year of construction: 2019 Control: Index control C200-SL, MS40C Double-NCU Technical data: Working spindles: Number: 6 pcs. Spindle bore: max. 40 mm Max. speed: 7,000 rpm Power (100% / 25%): 13 / 24 kW Torque (100% / 25%): 31 / 57 Nm Synchronous spindle: Number: 1 pc. Spindle bore: 40 mm Max. speed: 8,000 rpm Power (100% / 25%): 10 / 14 kW Torque (100% / 25%): 16 / 22 Nm Slide travel z: 150 mm Number of tools for back-end machining: 3 pcs. Swiveling range b: 144 ° Tool holder: Number: 12 pcs. Slide travel x: 73 mm Slide travel z: 120 mm Tool holder, cut-off and back-boring slide: Number: 1 pc. Slide travel x: 82 mm Number of tools for back-end machining: 3 pcs. Electrical connection data: Rated power: 85 kW Connection power: 101 kVA Rated current: 145 A Max. pre-fuse: 160 A Note: Mains voltage: 400V Note: Electrical frequency 50 Hz Technical features & accessories: - Double-NCU - Signal light 'Smartlight' with LED - Machine designed for connection to a TN network. - Coolant: Cutting oil - NC option Synchronous spindle / Multi-sided turning incl. electronic shaft - INDEX loading magazine MBL40-6/3300/Strip loader/50Hz: - Strip loader 50Hz - for bar diameter D13 - D40 - Bar length 3300 mm - with pilot drilling unit - Material storage with 700 mm support area - Profibus-DP-Master interface. - 1 set (6 pieces) reducing sleeves manufactured for bar or corner dimensions, diameter D = * mm, Inner diameter range D14 - D41 - 1 set (6 pieces) material sliders for material diameter D24mm - D32mm, consisting of: - 6 material sliders D23 - 6 rotating sleeves D23 - 1 set (6 pieces) internal clamping sleeves D23mm - for material diameter D24mm - D32mm - pilot drilling diameter D15mm - 1 set (6 pieces) external stops D23mm - for material diameter D24mm - D32mm - pre-machined - 1 set (12 pieces) reducing sleeves for material sliders. The outer diameter of the reducing sleeves corresponds to the material diameter (D13 - D40) - 1 set (6 pieces) adapter sleeves, inner diameter range D13.5 - D40.5. The inner diameter of the adapter sleeves should be bar diameter + 0.5mm. - 1 set (6 pieces) two-part guide intermediate tubes, diameter 29 mm - Assembly aid for the sleeves of the guide intermediate tubes - UNIMAG - Interface for connecting a bar loader Todpfx Adszlutmswsc - Part discharge via slide into spindle position 6 - Workpiece conveyor belt in spindle position 6, machine-integrated - Hainbuch TOPlus Axfix D40 for synchronous spindle - Multi-sided and thread milling device - Reduction ratio i=5:1 - Inductive encoder for reference query - Internal oil lubrication - INDEX short taper connection - without converter - Back-end machining device on slide position 6.2 for max. three boring positions for fixed tools FURTHER INFORMATION IN THE PICTURES Accessories, tools and clamping devices shown are only included in the scope of delivery if this is stated in the additional information. Changes and errors in the technical data and information, as well as prior sale, are reserved!

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Soraluce model FL8000 high performance travelling column, floor type CNC milling machine TRAVEL (X) 7,500 mm TRAVEL (Y) 1,400 mm TRAVEL (Z) 1,000 mm RAPID TRAVERSE (X,Y,Z) 25,000 mm/min WORKING FEED RANGE (X,Y,Z) 1 – 10,000 mm/min ACCELERATION RATE (Instantaneous not maximum) 1 m/sec2 SPINDLE SPEED 20 - 4,000 Rpm SPINDLE TAPER ISO 50 SPINDLE POWER 28 Kw NC15C - HEIDENHAIN iTNC 530 (Flat 15.1" TFT Screen with digital drives). Single processor version. Prepared for a machine of 10 motors (9 CNC axes + spindle motor). Main push button panel with individually operated push buttons for linear axes (X+, X-, Y+, Y-, Z+, Z-) K20 option for the i530M. Independent AC. Heidenhain digital drive servomotor for each axis HEIDENHAIN HR-410 portable electronic handwheel with 5m spiral cable Automatic Indexing head 28Kw, 760Nm, 0.001°x 0.001°, 4000 Rpm. Continuous air and oil mist lubrication system for head gears. Automatic Tool Clamping device – 15,000N. Automatic hydraulic tool releasing device Spindle taper: BT50 High Torque spindle motor 28kW, 100% ED, digital motor. R10 – ZF gearbox two speed including cooling unit Spindle Speed Range 20 – 4,000Rpm Rapid Feed X-Y-Z axes 25.000mm/min Working Feed range X-Y-Z axes 0 - 10.000mm/min Acceleration rate X- Y -Z axes 1 m/s2 (instantaneous, not maximum) Hydraulic counterbalance system for head/ram assembly X axis driving system by two servomotors, two gearboxes and a double rack & pinion Preloaded ballscrews with double recirculating nuts in Y and Z axes. Automatic centralized lubrication system. Linear Guiding System with recirculating cylindrical rollers in each axis. Automatic centralized lubrication system for the guides. HEIDENHAIN Linear measuring scales in X-Y-Z axes with compressed air purge system - (Precision +/- 0,005mm) H48 – Coolant through the spindle type AD. Tedpsw U Tlzsfx Adwoc M3 – Automatic tool changer 40 stations. M6 – Horizontal-vertical tool changing facility. M8 – Motorized tool changing device. Tool changer is driven by a servo motor Hydraulic equipment Front metallic roller blind cover to both upper and lower ram area, together with metallic protection to the lateral side of the column, between the machine table and the rear guideway support, which protects the vertical movement of the ram. CE10 - PROTECTION on the back and both lateral sides of the machine column P20 - Operator's platform fixed to the column and travels together with it in the "X" axis direction. The main operator’s panel is mounted within the operator's platform area for machines without an operator’s pendant and is accessed from the rear of the machine. D7 + D50A - Coolant system with 1000L capacity tank with two pumps providing high and low pressure providing 5 & 12bar and 50L/min flow rate. Paper and Magnetic filtering. E30A – swarf conveyor FL8000 Hinge conveyor belt. Width 350mm PW11B – Pendulum working area system. PM2 x 2 – Machine prepared by Soraluce for the inclusion of two rotary tables. Working area lighting. Electrical cabinet cooling system Electrical cabinet lighting Working methods - According to CE safety regulations Filter to assure electromagnetic compatibility. Protection to both sides of the column with security bumpers Anchoring Bolts Standard Colour - Blue RAL 5005 / Grey RAL 7035 K19 – Two sets of machine documentation (One hard copy, one on CD ROM) Floor plate 8,000 x 1,500 x 300mm

Condition: not inspected (used), Year of construction: 1996, empty load weight: 800 kg, diameter: 1.5 - 160 mm Todpfxswgm Sas Adwoc stroke: 400 mm weight: 800 kg

Condition: good (used), Year of construction: 2015, functionality: fully functional, turning length: 650 mm, turning diameter: 400 mm, Fanuc Oi-TD control 3-jaw chuck diameter 250mm 12-fold revolver tail stock Tsdpovi Haqsfx Adwec chip conveyor The machine has only 4051 switch-on hours Technische Daten: / technical details Schwingdurchmesser / rotary diameter 650 mm Drehdurchmesser / turning diameter 400 mm Drehlänge / turning length 650 mm X-Weg / X-travel 230 mm Z-Weg / Z-travel 650 mm max. Drehzahl / max. spindle speed 4500 UpM /rpm Anzahl der Revolverplätze / number of tool places 12 Antriebsleistung Spindel / drive capacity spindle 11/15 kW Gewicht ca. / weight ca. 5400 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.