Used 2D Laser for sale (3,539)

Condition: used, Year of construction: 2008, Working hours machine: 120266 h Laser power: 4000 Watt Max. punching force: 300 kN Control: AMNC-F Working range laser: 2500 x 1525 mm Working range punching: 3050 x 1875 mm Length: 6354 mm Width: 5880 mm Height: 2517 mm Machine weight: 30000 kg Electrical connected load: 85 kVA x-axis: 100 m / min y-axis: 80 m / min simultanes (x and y): 128 m / min Standard configuration - Patented servo-electric double drive- Punching force 300 kN - low energy consumption of the punching unit (maximum 7 kW, 1 kW in stand-by mode) - smooth-running, low-noise, low-wear and almost maintenance-free   - 780 punching strokes per minute Crsdpfxoz R Ri Ie Ak Aoi - Optimum use of sheet metal - Punch & Forming for forming up to 20 mm in height - Multiple thread unit with four inserts from M 2.5 to M 6 - brush table for scratch-free processing Extended machine accessories - Z-revolver with 45 turrets (2 x B Station Auto Index / 2 x C Station Auto Index)- punch & forming- tapping Automation - does not include the loading unit shown in the picture

Condition: good (used), functionality: fully functional, Year of construction: 2017, laser power: 3,000 W, X Working area max.: 2500 mm Y Working area max.: 1250 mm Control system: Basic Rexroth IndraMotion MTX Laser power: 3000 watts Standard equipment: Machine - Closed machine frame - Hybrid axis system - Linear magazine with 20 slots for clamping jaws and tools - Drives with maintenance-free three-phase motors - Follow-up device with programmable clamping beam - Foot pedal for clamping jaw closure - Beam protection - Dividing chute on the right - Part flap on the left - Sensor for part flap - Work area lighting - FocusLine - Protective tool TRUMPF Laser - Solid-state laser TruDisk 3001 with one laser beam cable (LBC) output - LBC according to standard layout (10 m) - Laser power control - Laser logbook function - Enclosed beam guidance via laser beam cable (LBC) The TruDisk laser is subject to international export control. According to EC Dual-Use Regulation 428/2009 (lasers covered under 6A005). Compact cutting unit - Solid-state laser compact cutting unit - Protective glass - Collision protection - ControlLine Punch head - Delta Drive - Rotatable mono-tool holder - Programmable clamping beam position - Tool length compensation - Spray lubrication for the punch - Scrap extraction - Forming function - Stroke counter for the punch Control system - TRUMPF control system based on Rexroth IndraMotion MTX - Touch panel with 19'' TFT color display - Integrated technology data - Programmable cutting gas pressure - Teleservice interface via Internet - Automatic shutdown including wake-up function - Program management - Production plan Data transfer - USB interface - RJ45 network connection - Central Link Safety - CE marking Crjdpfx Asz Rl Hysk Aei - Multi-beam light curtains - Protection against scattered radiation Extended laser equipment - Copper cutting package - Brass cutting package Extended punching equipment - MultiTool function - MultiBend function - Thread forming function with thread counter - Signing/fast beading function - Engraving function - Deburring and rolling technology function - Adaptive stroke calibration - Spray lubrication for the die and level monitoring - Smart Punch Monitoring Part removal - Integrated sorting function for dividing chute - Sensor for dividing chute - Container track for 4 standard containers - Containers supplied by the customer Special sheet metal processing - Brush tables - Loading and unloading aid for brush tables Options Compact dust collector - CO2 extinguishing system for the compact dust collector Data transfer - Wireless operation point SheetMaster Compact 2500x1250mm (AK05) - Suction frame - Unloading trolley for scrap grid and microjoint sheets - Loading station with spreader magnet for separating sheets - Double sheet detection - Vacuum sensor - 2nd operator station for loading and unloading - Compact installation (double-wing swing doors) - Peeling system

Condition: excellent (used), functionality: fully functional, Year of construction: 2011, operating hours: 28,025 h, machine/vehicle number: A0320A0086, laser type: CO₂ laser, laser source manufacturer: TRUMPF, laser hours: 6,496 h, laser power: 6,000 W, laser wavelength: 10,600 nm, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, overall weight: 15,000 kg, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, TRUMPF TruLaser 7040 CO₂ laser cutting machine, year 2011. Equipped with 2 laser resonators, each with 6,000 W power, and 2 cutting heads. Technical data: Laser power: 2 x 6,000 W 2 CO₂ laser resonators 2 cutting heads Laser operating time: 28,025 h Beam operating time: 6,496 h Power supply: 400 V / 50 Hz Connected load: 130 kVA Machine weight: approx. 15,000 kg Cedpfx Ake Adzppo Aeri Machine No.: A0320A0086 The machine can be inspected while powered on in Poland. Additional information and photos are available upon request. Price: EUR 39,000 net, EXW Poland. Loading and transport to be agreed separately.

Condition: used, Laserline Type: LPC03 Lascon laser system with Lascon controller LPC03 Laserline diode laser The diode laser ›LDM 500-60‹ has a wavelength of 935 nanometers and an output power of 550 watts. Laser type: LDM 500-60 Wavelength of 935 nanometers +/- 10% Laser power: 550 W Supply voltage 100-264V +/- 10% Max. power consumption 1.7 kW Frequency 1 phase 47-63 Hz Laser class 1 Type: LDM 500-60 Lascon controller LPC03 The LPC03 has the processing power of a complete PC in a very small space. Instead of a hard drive, a removable flash disk has been installed. Due to the elimination of the hard drive and the extremely low heat generation, the LPC03 is therefore ideally suited for tasks in the field of measurement, control and regulation in an industrial environment. The fiber-coupled MA pyrometers QP004 and EP004 can be easily integrated into the device. The fiber optic cable is then simply connected to the rear panel. The housing also provides space for the PCI card PCI-1P. In conjunction with the LASCON measurement and control system, the operating system and software are installed on the flash disk. Technical data: Motherboard: Half Size CPU card Slots: 1 x PCI, length max. 180 mm Drives: none Storage medium: removable flash disk Connections: USB front; Ethernet, RS232, VGA, keypad, mouse, USB rear Housing: 212 mm x 80 mm x 250 mm (height x width x depth) Protection class: Front: IP40 Environment: 15°C - 40°C Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone. Cedpfx Aezdqkrek Aeri

Condition: used, Item: inos iSENS laser sensors Item: inos iSENS laser sensors with control unit, cable, PC interface Condition: used Cedpfx Ajzdn T Rok Aeri Scope of delivery: (See picture) (Changes and errors in the technical data and specifications are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: used, Coherent Laser Source Type: AVIA 355-X Laser source from Coherent with PC Designation: AVIA 355-X Operating hours: Diodes 1975/1975, Head 26488 Wavelength: 355nm Cedpfszdrpcsx Ak Asri Excitation: Diode-pumped Laser type: Nd:YAG laser Laser type 2: THG, Q-switch Operating mode: Pulsed Laser power: 10 W @ 60 kHz Beam divergence:

Condition: used, Ytterbium Fiber Laser Type: YLR-2400 S2-WW Description: Laser module (IPG YLR-2400 S2-WW fiber laser with cooling) Codpfx Akezdrw Ho Aeri Year of manufacture: 2017, Serial number: 7121450 Laser power: 2.4 kW Laser structuring system, cooling unit KKW; without 3D scanning head and without laser spy sensors and cables. 400 VAC +/-10% 3P/PE 50/60 Hz 80A Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: new, functionality: fully functional, overall weight: 100 kg, total height: 1,660 mm, Year of construction: 2026, input voltage: 230 V, laser power: 20 W, laser wavelength: 1,064 nm, type of cooling: air, type of input current: AC, The universal laser marking system LAS 28 from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes a laptop incl. holder with Windows operating system. Optionally, the laser model LAS 28 can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extensions for marking long parts, can be realized. Made in Germany - Fiber laser 20W (Optional: 30W, 50W) - Wavelength 1064nm - marking field size 150x150mm (optional: 200x200) - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system Crjdpfszpwmdox Ak Asi - optional: exhaust system (incl. activated carbon filter) - optional: Autofocus system - signal light for indication of operating status - marking software EZCAD (optional additional laser software) - Pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - max. part height approx. 270mm - electrically adjustable Z-axis (adjustment of working plane) - frame made of aluminum profile - connection 230V - air cooled - Laptop with Windows operating system - dimensions: 800x 600 x 1660mm (LxWxH) - weight: approx. 80 Kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2005, Beam on time: 12,577 hours Laser on time: 68,745 hours including Sheetmaster Crodpfxoznir Ae Ak Aei

Condition: used, functionality: fully functional, Year of construction: 2007, machine/vehicle number: A0100A0637, laser type: CO₂ laser, laser source manufacturer: trumpf, laser power: 2,000 W, input voltage: 24 V, input current: 100 A, input frequency: 4,000 Hz, type of input current: three-phase, type of cooling: water, year of last overhaul: 2025, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Trumpf Trumatic 6000, manufactured in 2007 – still in use and fully operational (used for stainless steel sheets, 0.8 – 2 mm thick). Crsdpfoz Iwvgsx Ak Aoi

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, Doors and walls made of powder-coated steel sheet and aluminum profiles 2 doors, position of the doors can be selected individually (opening approx. 2200 mm) with 1 privacy screen (wavelength 1080 nm (OD 10+)), size approx. 500x300mm without roof (roof and ventilation opening available separately) for lasers with a wavelength of 940-1090nm, power max. 1500W, maximum permissible exposure (MPE) max. 3.67x10^6 W/m² incl. LED strips for signaling at the corners (RGB colors) incl. assembly instructions incl. operating instructions Laser welding machine Exhaust system (not included in the scope of delivery) FURTHER DETAILS AND INFORMATION AVAILABLE UPON REQUEST Crsdpfx Akez Srcko Aoi PLEASE SCHEDULE A SITE VISIT WITH US.

Condition: good (used), functionality: fully functional, PERSKE Trimming Motor e.g. for milling, grooving, rebating Type: AC-MOTOR 2.5 - 3.6 kW withi 400V 100HZ Motor shaft-diameter: 30 mm Codpfxj Aatu Aj Ak Ajri Homag-list price (2026): 3,230 EURO (motor only)

Condition: used, functionality: fully functional, Year of construction: 2014, machine/vehicle number: 125, control type: CNC control, laser type: CO₂ laser, laser source manufacturer: FANUC, laser source model: AF4000i-C, laser power: 4,000 W, overall weight: 9,500 kg, AMADA FO MII 3015 NT CO2 laser cutting machine, manufactured 03/2014, with 4 kW FANUC AF4000i-C laser source. Crsdez Tdc Sspfx Ak Asi The machine is operational and has been used for cutting by the seller. Operating and cutting hours are being checked and will be added. IMPORTANT: The tower storage / automatic material handling system was dismantled in summer 2026. The machine has no pallet changer. To move the cutting table outside the machine manually, suitable rails would need to be designed and built. This rail system is not currently installed. A computer with installed AMADA Dr.ABE nesting/programming software, version 2.15.04, and its software licence is included. Machine nameplate: serial number 125; weight 9,500 kg. The dismantled tower is stored outdoors. Any sale of the tower and its condition/completeness must be agreed separately. It is not part of the advertised machine configuration. Asking price: EUR 20,000 net, plus applicable VAT. Further information on hours, maintenance history, accessories included, inspection and collection arrangements will be added.

Condition: excellent (used), Bystronic BySprint 3015 2kW Fiber Laser With Byloader Sheet Loader And Shuttle Table. New 2011. Upgraded head and new fibre fitted in 2020 at a cost of £46k. Maintained by Bystronic. Fume extraction. Available with Nitrogen plant including Sauer Tornado Booster Compressor. Cjdpfx Akoz It U Se Asri

Condition: excellent (used), functionality: fully functional, Year of construction: 2015, operating hours: 70,000 h, machine/vehicle number: S1631C0047, laser hours: 38,125 h, laser power: 3,000 W, Equipment: CE marking, cooling unit, documentation/manual, emergency stop, fume extraction, safety light barrier, For sale – TRUMPF TruLaser Cell 8030 L60 (2015) | 3D laser cutting system Professionally dismantled and stored – ready for immediate pick-up. The machine ran in series production until shutdown, was serviced annually and exclusively by TRUMPF, and has now been professionally dismantled by us and stored at our site in Gouzeaucourt (northern France). Ideal for automotive, aerospace and general metalworking requiring precise 3D contour cutting of tubes, hydroformed parts and complex profiles. Machine data - Model: TRUMPF TruLaser Cell 8030 L60, year 2015 - Laser power: 3,000 W (TRUMPF) - Serial number: S1631C0047 - Maintenance: annual service exclusively by TRUMPF – full documentation available - Status: dismantled, stored, ready for pick-up Key benefits - 5-axis CNC kinematics for demanding 3D geometries - Enclosed, automation-ready working area - Proven in one-off and medium series production - Complete TRUMPF service history – no third-party interventions Our added value: modular handover We are not a dealer but an active contract manufacturer (SOERMEL Groupe, France – IATF 16949 / EN 9100 / ISO 9001). Choose the package that fits: M1 – Ex works: pick-up at our site in Gouzeaucourt, loading onto your truck. M2 – Delivered: M1 + international transport, insurance, unloading at your site (DAP/DDP on request). M3 – Delivered & installed: M2 + mechanical installation, utility connection, first start-up, laser alignment. M4 – Turnkey: M3 + commissioning, process validation with your parts, operator and maintenance training, acceptance protocol. Crjdpfx Ao Ad Hcujk Aei A second identical machine is also available. Inspection of the stored machine in Gouzeaucourt by appointment. Price on request.

Condition: new, neu ca. 12 - 14 Wochen ab Auf Türkei 219400 € 6 kW Wechseltisch 25 mm 15 mm 20 mm 10 mm 12 mm 4100 x 2070 mm 4100 mm 2070 mm 125 mm 4064 x 2032 mm 240 (für 3 - 12 kW) / 400 kg/m² 3900 (für 3 - 12 kW) / 64 kg 100 m/min 100 m/min 141 m/min 14 m/s² +/- 0,05 mm +/- 0,05 mm 32 s The HD-FN has two tables which are automatically switched alternately to enable simultaneous cutting and loading/unloading. The shuttle table is positioned longitudinally, which results in the best possible accessibility for optional loading and unloading systems. Control, laser source and cooling are integrated into the machine. The cutting head has automatic focus adjustment. The system consists of the following components: Shuttle table (positioned longitudinally for best possible accessibility for optional loading and unloading systems) Encapsulated cutting room with protective glazing CNC graphic control with touchscreen Laser source Brilase Premium Cutting head with automatic focus adjustment Integrated cooling unit for cutting head and laser source CAD/CAM software Lantek for programming including autonesting Positioning laser Sheet check system (automatic detection of sheet position and dimensions) Automatic nozzle cleaning Central lubrication Slug box Working area lighting Multi-chamber suction system Light barrier protection for the changing table Crsdpfx Aox Urp Hjk Asi Remote maintenance access Air condition for electrical cabinet Equipped according to CE guidelines ALTERNATIVE LASER SOURCES: Material 6 kW 12 kW 15 kW 20 kW Mild steelS235 25 30 35 40 Stainless steel(304) 15 25 35 40 Aluminium (5083) 20 30 35 40 Copper 10 15 15 15 Brass(CuZn39 Pb3) 12 20 20 20 OPTIONS: Suction unit with filter Sheet handling systems Automatic nozzle change

Condition: new, neu ca. 12 - 14 Wochen ab Auf Türkei 185300 € 3502.17 € 6 kW Wechseltisch 25 mm 15 mm 20 mm 10 mm 12 mm 3100 x 1525 mm 3100 mm 1525 mm 125 mm 3084 x 1524 mm 240 (für 3 - 12 kW) / 400 kg/m² 2200 (für 3 - 12kW) / 360 kg 100 m/min 100 m/min 141 m/min 14 m/s² +/- 0,05 mm +/- 0,05 mm 25 s The HD-FN has two tables which are automatically switched alternately to enable simultaneous cutting and loading/unloading. The shuttle table is positioned longitudinally, which results in the best possible accessibility for optional loading and unloading systems. Control, laser source and cooling are integrated into the machine. The cutting head has automatic focus adjustment. The system consists of the following components: Shuttle table (positioned longitudinally for best possible accessibility for optional loading and unloading systems) Encapsulated cutting room with protective glazing CNC graphic control with touchscreen Laser source Brilase Premium Cutting head with automatic focus adjustment Integrated cooling unit for cutting head and laser source CAD/CAM software Lantek for programming including autonesting Positioning laser Sheet check system (automatic detection of sheet position and dimensions) Automatic nozzle cleaning Central lubrication Slug box Working area lighting Multi-chamber suction system Light barrier protection for the changing table Remote maintenance access Air condition for electrical cabinet Equipped according to CE guidelines ALTERNATIVE LASER SOURCES: Material 6 kW 12 kW 15 kW 20 kW Mild steelS235 25 30 35 40 Stainless steel(304) 15 25 35 40 Csdsx U Elbjpfx Ak Aori Aluminium (5083) 20 30 35 40 Copper 10 15 15 15 Brass(CuZn39 Pb3) 12 20 20 20 OPTIONS: Suction unit with filter Sheet handling systems Automatic nozzle change

Condition: used, functionality: fully functional, Year of construction: 2005, operating hours: 84,893 h, machine/vehicle number: A0420A0151, control type: CNC control, controller manufacturer: Siemens, controller model: Siemens Sinumerik 840D (TRUMPF MMC), laser type: CO₂ laser, laser source manufacturer: TRUMPF, laser source model: TLF 3200, laser hours: 32,832 h, laser power: 3,200 W, type of cooling: water, year of last overhaul: 2019, Equipment: cooling unit, dust extraction, emergency stop, fume extraction, TRUMPF Trumatic Lasercell 1005 – 3D Laser Welding System (3.2 kW) Used, ready-to-use 3D laser welding system (Type TLC 1005) Special modification for 3D laser welding (adapted beam guidance) Laser cutting is not possible in the current configuration Special version with a powered rotary table for highly precise round and multi-sided processing Basic data & performance: Manufacturer: TRUMPF Laser- und Systemtechnik GmbH Model: Trumatic Lasercell 1005 (Type TLC 1005) Year of manufacture: 2005 Laser power: 3,200 W (Resonator TRUMPF TLF 3200) Serial number: A0420A0151 Connected load: 68 kVA Operating hours: Processing time (beam on): approx. 32,832 h (pure welding time with active laser beam) Operating time (laser on): approx. 84,893 h (total operating time of the resonator incl. standby) Condition, scope of delivery & history: Scope of delivery includes cooling unit (chiller) and Herding dust extraction/ventilation system (Type DELTA 1200-12/9 SC, year 2004) The system was taken over from a VW plant in 2019 Professional installation, technical commissioning and inspection carried out by GIMTAS in September 2019 Sale & processing: On-site inspection possible after prior arrangement Price negotiable Credsz Rzikspfx Ak Aoi Dismantling and transport preferably carried out by the buyer

Condition: new, Year of construction: 2026, CW-5200TH Water Chiller by S&A — Stable Cooling for CO₂ Laser Plotters The S&A CW-5200TH chiller is an industrial water cooling system designed for cooling CO₂ laser tubes in laser cutting plotters, laser engravers, and other devices requiring a stable coolant circulation system. S&A is a well-known brand in the laser cooling industry, recognized for reliable chillers, stable operation, and effective protection of CO₂ laser tubes against overheating. Thanks to its active cooling system, the CW-5200TH maintains coolant temperature at an appropriate level, improving laser tube safety, operational stability, and the repeatability of cutting and engraving results. Why choose the S&A CW-5200TH chiller? Stable coolant temperature control Cjdpfeg Nkvrex Ak Aori The chiller reduces the risk of laser tube overheating during extended operation and intensive workloads. CO₂ laser tube protection Proper cooling helps extend the service life of the laser tube and reduces the risk of failures caused by excessive operating temperatures. 8-liter coolant reservoir The larger tank capacity improves temperature stability and supports consistent coolant circulation. Maximum pump lift height of 12 m The built-in pump ensures efficient coolant circulation throughout the laser cooling system. Compact design The unit requires little installation space and can be easily positioned next to a laser plotter or workstation. 220–240 V power supply The chiller is designed for standard single-phase electrical supply. Applications The S&A CW-5200TH chiller is suitable for cooling: CO₂ laser cutting plotters, CO₂ laser engraving machines, water-cooled laser tubes, equipment requiring precise coolant temperature stabilization. It is particularly recommended for users who rely on laser plotters as everyday production equipment and require stable, uninterrupted operation. Technical specifications Parameter Value Model S&A CW-5200TH Device type Industrial water chiller Power supply AC 1P 220–240 V Frequency 50/60 Hz Current consumption 0.5–3.8 A Reservoir capacity 8 L Maximum flow rate 13 L/min Connections (inlet/outlet) 10 mm Rated cooling capacity 1.43 kW Refrigerant R-134a Maximum pump lift height 12 m Net weight 28 kg Dimensions (L × W × H) 580 × 290 × 470 mm

Condition: good (used), Year of construction: 2012, The Prima Power Platino FIBER is in good condition, one owner, always serviced on time by Prima Power service representatives. For sale complete with storage. All documentation, service reports are included. Recently serviced with a full annual service. Laser cutting machine is connected, available for inspection, testing, in Ukmergė. Credpsqi D Sqsfx Ak Aei Specification: Model. Serial No.: 776 E 308 Year of manufacture: 2012 Made in: Italia Power: Working area (X x Y): Weight: Laser working hours: 61484 Cuts up to: 5 mm Location: Ukmergė Available for testing: Yes If you have any further questions, we will be happy to answer them.

Condition: used, Year of construction: 2009, Technical details: Beam Hour: unbekannt / unknown h laser capacity: 4000 W The TLF4000 resonator was installed in a Trumpf True Laser 2525: Laser power: 4,000 W (4 kW) Wavelength: 10.6 µm Crjdpoyuvcisfx Ak Aei Beam mode: TEM01* Pulse frequency (gating): 100 Hz – 10 kHz Gas consumption (laser): CO2: approx. 1 l/h N2: approx. 6 l/h He: approx. 13 l/h Cutting gas O2: approx. 500 – 2,000 l/h Electrical power consumption: approx. 33 – 67 kW Adjustable laser power: programmable in 1% increments Laser type: CO2 laser with closed gas circuit Translated with (free version) *

Condition: new, fuel type: diesel, color: other, Year of construction: 2025 Empty weight: 1.265 kg Width: 244 cm Steering: skid steer CE mark: yes General condition: very good Technical condition: very good Visual appearance: very good Cedpfx Aeygwmmsk Aori New Attachment Grader for Bobcat Skid Steer Loader, 244 cm Wide, Incl. 2 Laser Receivers LR410

Condition: excellent (used), functionality: fully functional, Year of construction: 2014, Operating hours: approx. 22,800 h Laser on: approx. 40,100 h Voltage: 400 V Frequency: 50 Hz Cjdpfxeyyygks Ak Ajri Power: 3,200 W

Condition: used, Year of construction: 2021, Working area 3000 x 1500 mm Max. laser capacity 4 Kw (TruDisk 4001) Max. thickness 25/20 mm (Mild steel/Stainless steel) Integrated camera for process surveillance (with monitor interface) Control: Siemens Sinumerik 840 D SL Cjdpfjxr U U Rjx Ak Asri with 18” touch screen Automatic speed regulation Programmerbel automatic shut down of the machine Kobber cutting package Brass cutting package Equipped with: Automatic pallet changer Price when bought in 2021: Euro. 365.000

Condition: used, Year of construction: 2006, CNC portal flame cutting machine Manufacturer: Bach Type: ACK-2D Year of manufacture: 2006 CNC control: NBS300 Work table: 1.5 x 6 m Crsdjw El Udopfx Ak Aoi 2 oxy-fuel torches 191026ä