Used 3 Axis for sale (67,737)

Condition: excellent (used), For sale: SEW-EURODRIVE WF20 DT63N4 geared motor with a three-phase motor, 0.18 kW. The unit is fully functional, tested, and ready for operation. Its technical and visual condition is good. It shows normal signs of wear and tear consistent with use. The scope of the sale includes exactly what is shown in the pictures. Dwsdpfxjznn Amj Apwsa Technical specifications: Manufacturer: SEW-EURODRIVE Model: WF20 DT63N4 Power: 0.18 kW Power supply: 3× 220–240 V Δ / 380–415 V Y, 50 Hz Motor speed: 1320 rpm Output speed: 48 rpm Gear ratio: i = 27.5 : 1 Protection class: IP54 Operating mode: S1 Weight: 8.07 kg Country of manufacture: Germany

Condition: excellent (used), For sale: SEW-EURODRIVE S40DT71D-4 geared motor with a 0.37 kW three-phase motor. The unit is used, fully functional, and ready for operation. Its technical and visual condition is good, with normal signs of use. It is ideally suited for driving conveyors, feeders, industrial machines, and other applications requiring a reliable drive. Technical data: Manufacturer: SEW-EURODRIVE Type: S40DT71D-4 Power: 0.37 kW Motor speed: 1400 rpm Output speed: 69 rpm Dwjdpfxsznm Rcs Apwoa Torque: 43 Nm Gear ratio: i ≈ 20.3 Power supply: 3×220Δ / 380Y V, 50 Hz Current: 2.25 / 1.3 A Protection class: IP44 Insulation class: B Power factor: cos φ = 0.7 Design: B3B Country of manufacture: Germany

Condition: excellent (used), For sale: a Getriebebau NORD gearmotor with a worm gear and a three-phase motor. The unit is fully functional, tested, and ready for operation. The technical condition is very good, with normal signs of wear and tear resulting from use. This gearmotor is ideally suited for driving conveyors, feeders, industrial machinery, mixers, and other devices requiring high torque at low speeds. Technical data: Gear manufacturer: Getriebebau NORD Gear type: 1S50VZ.71 L/4 Dwodsznk U Eopfx Apwja Gear ratio: i = 35.00 Output speed: 40 rpm Motor manufacturer: NORD Motor type: SK 71L/4 Power: 0.37 kW Supply voltage: 230/400 V Δ/Y (50 Hz) 265/460 V Δ/Y (60 Hz) Motor speed: 1360 rpm (50 Hz) 1630 rpm (60 Hz) Protection class: IP55 Insulation class: F Operating mode: S1

Condition: excellent (used), For sale: a Lenze Extertal geared motor / Germany, with a GST04-2M VBR071C42 cylindrical gearbox and an MDEMA1M071-42 three-phase motor. The unit is fully functional, tested, and ready for operation. Its technical and visual condition is good – it only shows normal signs of wear resulting from use. The geared motor is ideally suited for driving conveyors, feeders, production machines, packaging equipment, and other industrial applications. Technical data: Manufacturer: Lenze Gearbox model: GST04-2M VBR071C42 Motor type: MDEMA1M071-42 Rated power: 0.55 kW Power supply: 3×230/400 V AC, 50 Hz Motor speed: 1405 rpm Output speed: 421.5 rpm Gear ratio: i = 3.333 Torque: 12 Nm Rated current: 2.40 A (230 V Δ) / 1.40 A (400 V Y) Power factor (cos φ): 0.77 Djdpfxozm T Ifs Apwswa Protection class: IP55 Insulation class: F Mounting type: B3 (flange) Standard: EN 60034

Condition: excellent (used), For sale: SEW-Eurodrive R40DT71K2Z gearbox with a 0.25 kW three-phase motor. Dwedpezm Sq Sjfx Apwoa The unit is fully functional, tested, and ready for operation. The gearbox is in good technical and visual condition. Normal signs of wear and tear from use are visible, but these do not affect its performance. Technical specifications: Manufacturer: SEW-Eurodrive Model: R40DT71K2Z Rated power: 0.25 kW Power supply: 230/400 V (Δ/Y), 3-phase Frequency: 50 Hz Motor speed: 2500 rpm Output shaft speed: 39 rpm Rated current: 1.60 / 0.93 A Protection class: IP54 Insulation class: F Mounting method: IM B6 Weight: 16.14 kg Power factor (cos φ): 0.85 Lubrication: CLP220 Country of manufacture: Germany

Condition: excellent (used), For sale: SEW-Eurodrive SF32 DT80K4 geared motor with a 0.55 kW three-phase motor. Dwedpfozm R Ayox Apwoa The unit is fully functional, tested, and ready for operation. The geared motor is in good technical and visual condition. Normal signs of use resulting from operation are visible, but they do not affect its performance. Technical specifications: Manufacturer: SEW-Eurodrive Model: SF32 DT80K4 Rated power: 0.55 kW Power supply: 230/400 V (Δ/Y) Motor: 3-phase Frequency: 50 Hz Motor speed: 1360 rpm Output shaft speed: 77 rpm Rated current: 3.05 / 1.76 A Protection class: IP54 Insulation class: B Mounting method: B5 Weight: 16.15 kg Power factor (cos φ): 0.77 Country of manufacture: Germany

Condition: excellent (used), For sale: SEW-Eurodrive RF32DT71D6 geared motor with a 0.25 kW three-phase motor. The unit is fully functional, tested, and ready for operation. The geared motor is in good technical and visual condition. It shows normal signs of wear and tear resulting from use. Thanks to its robust construction, it is ideally suited for driving industrial machinery, conveyors, feeders, rotary tables, and other drive systems. Technical specifications: Manufacturer: SEW-Eurodrive Model: RF32DT71D6 Gearbox type: RF32 Motor power: 0.25 kW Power supply: 220 V Δ / 380 V Y, 3-phase Frequency: 50 Hz Dsdozm Rimepfx Apwswa Motor speed: 870 rpm Output speed: 36 rpm Gear ratio: i = 24.17 Protection class: IP54 Insulation class: B Mounting method: IM B5 Weight: 11.43 kg Country of origin: Germany The geared motor has a shaft with a keyway and a B5 mounting flange.

Condition: excellent (used), For sale: Lenze GST04-2B VCK071-32 gearbox with a 0.37 kW three-phase motor. The unit is fully functional, tested, and ready for operation. The gearbox is in good technical and visual condition. It shows normal signs of wear and tear consistent with use. Its robust construction and high torque make it ideally suited for driving industrial machinery, conveyors, feeders, mixers, and production lines. Technical specifications: Manufacturer: Lenze Gearbox model: GST04-2B VCK071-32 Djdpjzmy Uxofx Apwewa Motor manufacturer: Lenze Motor type: MDEBA1M071-32 Power: 0.37 kW Supply: 3× 220–240 V Δ / 380–415 V Y, 50 Hz Motor speed: 1360 rpm Output speed: 44 rpm Gear ratio: i = 31.6 Output torque: 79 Nm Ingress protection: IP54 Insulation class: F Operating mode: S1

Condition: excellent (used), For sale: a Lenze GSN04-1NHAR worm gear motor with a WEG AL71-4 three-phase motor, 0.37 kW. Dsdpfx Apezmyybjwswa The unit is fully functional, tested, and ready for operation. The gear motor is in good technical and visual condition. Only normal signs of wear are visible, consistent with its use. Thanks to its compact and robust design, it is ideally suited as a drive in industrial machines, conveyors, production lines, packaging equipment, and automation systems. The GSN04 series is a range of compact gear motors designed for applications requiring reliable power transmission. Technical data: Gearbox manufacturer: Lenze Gearbox model: GSN04-1NHAR Motor manufacturer: WEG Motor type: AL71-4 Power: 0.37 kW Power supply: 3× 220–240 V Δ / 380–415 V Y, 50 Hz Motor speed: 1370 rpm Output speed: 140 rpm Gear ratio: i = 10 Output torque: 22 Nm Protection class: IP55 Insulation class: F Operating mode: S1 (continuous operation) The scope of supply includes exactly what is shown in the pictures.

Condition: used, REF: MM6452 3 x Baker Perkins travelling ovens with 15m long x 1580mm wide belt. Dwedpszccfgefx Apwea NOTES: One of the ovens has a belt missing 12 x sections/lines. All equipment to be removed from the factory by the Buyer.

Condition: new, Year of construction: 2025, Protec KT 3000 HV, hydraulically adjustable in height Load capacity: 3000 kg Handheld remote control with digital display Dual-pedal remote control Height: approx. min. 700 mm when tilted to the center, max. 1400 mm Diameter of the turntable: 1400 mm Dwsdsifw Hdspfx Apwoa Tilt angle: min. 135° Speed: 0.05 to 0.9 rpm Motor power: 3 kW

Condition: new, Year of construction: 2024, We convert laser cutting machines from CO2 to fiber laser Dsdpfxsnkal Do Apwswa

Condition: new, functionality: fully functional, Year of construction: 2025, power: 60 kW (81.58 HP), warranty duration: 24 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, safety light barrier, Laser source – MAX Photonics Table size – 4000x2000 mm Control system – FSCUT 6000 Software – Cypnest + Cypcut Water chiller – Hanli Model: GR 4020 Power: 60,000 W Dwjdpfsw Ix Dcsx Apwsa Laser source: MAX Photonics Table size Straight cut: 4100 x 2450 mm Bevel cut: 3750 x 1800 mm Control system Straight cut: FSCUT 8000 Bevel cut: FSCUT 9100 Software: Cypnest + Cypcut Laser head: Boci BLT6/BLT4 Nitrogen proportional valve: SMC Water chiller: Hanli Power stabilizer: 400 kVA Load capacity: Up to 5,000 kg Laser power: 60,000 W X/Y positioning accuracy: ±0.1 mm/m X/Y repeat positioning accuracy: ±0.05 mm/m Maximum travel speed: 80 m/min Maximum acceleration: 0.8 G CNC control: EtherCAT-BUS Power supply: 380V 50Hz three-phase Servo motor power: X: 1.8 kW; Y: 5.5 kW*2; Z: 0.75 kW Power protection: Protection class IP54 External dimensions: 9700 x 4900 x 2350 mm Total machine weight: 12,500 kg Power consumption: 12kW: 78.25 kW/120 kVA 20kW: 112.25 kW/180 kVA Machine frame: welded steel Gantry crane: welded steel

Condition: like new (used), Year of construction: 2023, operating hours: 50 h, functionality: limited functionality, working width: 1,800 mm, type of input current: three-phase, total width: 2,400 mm, total length: 2,000 mm, total height: 2,200 mm, overall weight: 2,300 kg, additional equipment features: Complete with 6 de-reeling stations, Following consultation over 5 years with major UK manufacturers, production units, including working within factory which builds these machines, this machine was commissioned and built for experimental works to enable proof of concept for UK Government / Ofgem. This machine is built with steel welded frames to robust industry standards and fitted with 202mm diameter mandrel. Other mandrel sizes can quickly and easily be fitted. Six robust steel framed de-reeling stands – on wheels - are included, A steel framed deluge system is included. An alternative individual application system by manifold of a new, unused Grunfeld GRS 5 - One component dispense system, can be included if required, enabling glue supply to individual reels. The electronic controller is by Hartec Control systems, with infinite capstan speed control. Djdpfxozma E Dj Apwjwa Current equivalent machines by Spiraltech start at over £100,000 ! Capstan angle manual control is industry tradition, as once set, no adjustment is needed. Approx 10 paper reels are supplied FOC for pretest alignment. Specially incorporated accessible gearbox readily disconnected from motor. Brand new electric 3 – phase motor with less than 10 hours useage. Selection of forming belts to suit differing materials.

Condition: excellent (used), load capacity: 2,000 kg, Height-adjustable welding positioner with a load capacity of 2 tons, including infinitely adjustable clamping extensions and clamping jaws. Condition: very good. Speed, height, and tilt are infinitely adjustable. Hand and foot remote control. Welding current transmission: 600 Amperes. Dimensions: Length: 1940 mm Width: 1200 mm Disc diameter: 1200 mm Height (tilted): min. 700 mm, max. 1550 mm Height (horizontal): min. 900 mm, max. 1700 mm Dsdszk Ra Topfx Apwjwa Weight: 1750 kg.

Condition: excellent (used), CATALOG NUMBER 7614 Technical data: - Inlet width: 550 mm Dwjdpfx Ajza Eipopwsa - Inlet height: 220 mm - Shaft width: 630 mm - Knife length: 630 mm - Number of knives: 2 pcs - Sieve dimensions: 60x60 mm - 2 lower toothed feed shafts - Lower shaft motor approx. 1.5 kW - Upper toothed feed shaft - Upper shaft motor approx. 1.5 kW - Vibrating chute - Vibrating chute length: 4750 mm - Vibrating chute width: 450 mm - Main motor: 45 kW - Vibrating chute motor: 1.5 kW - Auto-reverse - Reverse mode - Overall machine dimensions L/W/H: 3200x1700x1400 mm - Overall machine dimensions L/W/H: 4750x800x1100 mm - Weight approx.: 4500 kg ADVANTAGES – Auto-reverse (adjustable) – Reverse mode – Used chipper, in very good condition Net price: 120,900 PLN Net price: 28,780 EUR (depending on the 4.2 EUR exchange rate) (Prices subject to change with significant exchange rate fluctuations)

Condition: excellent (used), I am offering for sale a high-quality RÖHM KFD-HS 200/3 hydraulic lathe chuck, designed for professional CNC lathes. The chuck is in very good technical and visual condition. It looks practically new and appears to have been used only a few times. The working surfaces and guides show only minimal signs of use. The set includes: * RÖHM KFD-HS 200/3 lathe chuck, * 3 standard jaws, * 3 RÖHM 538-55 top jaws, * operating wrench, * sturdy wooden transport box (I am not sure if this is the original box for this chuck). Technical data: * Manufacturer: RÖHM Dwjdjzlaqkopfx Apwja * Model: KFD-HS 200/3 * Diameter: 200 mm * Type: hydraulic 3-jaw lathe chuck * Maximum clamping force per jaw (Fmax): 48 kN * Total clamping force (Fges): 110 kN * Maximum rotational speed: 6500 rpm * Identification number: 155099 * Top jaws: RÖHM 538-55 * Country of manufacture: Germany The chuck is ideal for professional applications in machining and working on CNC lathes. It is a robust piece of equipment from the renowned German company RÖHM, which is valued for its high quality and precision.

Condition: good (used), Polar Mohr TR 1EL 145-3 Transomat Paper Stacker The machine is ready to use. This is the most popular design from the German manufacturer. The Transomat can be placed on the left side of the guillotine. Weight: 1600 kg Djdezlad Repfx Apwjwa Power supply: 400 V Control panel. Air table. Chrome-plated table surface

Condition: good (used), MBO T530-3-X Mobile Folding Knife The machine is in very good condition, ready for production. Dwsdpfjzlab Aex Apwoa Comes from the original owner. Can be connected to virtually any MBO machine model. Mounted on wheels for easy movement. Independent controls.

Year of construction: 2023, condition: like new (used), functionality: fully functional, Thermo Scientific Safety Workbench MaxiSafe 2030i. Class II. 3-filter configuration. Segmented stainless steel work surface. 4x 230V power outlets. Interior lighting. UV lamp left/right. Cable feedthrough: 8cm (diameter). Interior: stainless steel. Front flap: folding + motorized. Filter box. External dimensions HxWxD: 223x190x88cm. Dsdpowurkqefx Apwjwa Internal dimensions HxWxD: 77x180x60cm. Working height: 76cm. Display with touch control panel. Arm supports. Unused. Net purchase price: €19,401.61. Purchase date: 04/2024.

Condition: used, mileage: 503,000 km, power: 107 kW (145.48 HP), first registration: 03/2015, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 08/2027, gearing type: mechanical, emission class: euro5, number of seats: 2, total length: 7,128 mm, total width: 2,010 mm, total height: 2,660 mm, Due to the large number of non-serious emails / emails will not be answered. WhatsApp Dwedpfszng Smjx Apwja "Errors, typos, and prior sale excepted."

Condition: excellent (used), For sale is a Rietschle CLFT 81 DV vacuum-pressure pump from a renowned German manufacturer. This is a dry-running rotary vane pump designed for simultaneously generating vacuum and compressed air. It finds application in packaging machines, printing machines, woodworking machines, CNC machines, pneumatic conveying systems, and many other industrial installations. The unit is equipped with a three-phase motor with a power of 3.0 kW and is mounted on a robust, compact frame. Technical data: Manufacturer: Rietschle Dedpfxeziw Rpj Apwowa Model: CLFT 81 DV (13) Year of manufacture: 1991 Country of manufacture: Germany Type: vacuum-pressure pump (dry-running, rotary vane) Capacity: 80 m³/h (50 Hz) Maximum overpressure: 0.5 bar Motor power: 3.0 kW Rotational speed: 1450 rpm Power supply: 3×380 V Continuous operation: S1 Serial number: 1375434 Application: packaging machines, CNC machine tools, woodworking industry, printing industry, pneumatic conveying, equipment requiring vacuum or compressed air. Condition: Used. Visual condition as shown in the photos. Robust construction, ready for further operation.

Condition: like new (used), Year of construction: 2013, WESHAUPT gas burner, with gas line DUNGS DN65 Dwodpezbz Idsfx Apwea Type: WM - G20/3-A Year of manufacture: 2013 Output: 350-2600 kW

Year of construction: 1998, condition: used, Temperature range 140 °C heating capacity 6,6 kW Cooling capacity 18 kW dimensions 0,90x0,25x0,70 m weight of the machine ca. 72 kg HB-THERM HB-W 140 – Temperature Control Unit for Plastics Processing — ideal for injection molding and plastics processing facilities. Product description: The HB-W 140 temperature control units from HB-THERM (Grossenbacher Apparatebau AG, Switzerland) are proven peripheral devices for the precise temperature control of tools and machines. They are robust, reliable, and can be used with both water and oil. General Specifications - Manufacturer: HB-THERM (Grossenbacher Apparatebau AG), Switzerland - Model: HB-W 140 - Years of manufacture: 1998 Performance & Temperature Range - Heating capacity: 6.6 kW - Cooling capacity: 18 kW - Max. temperature: 140 °C Fluid - Suitable for: Water and oil - Application: Temperature control of injection molds and industrial tools Electrical specifications - Operating voltage: 380 – 420 V / 50 Hz - Connected load: approx. 7.2 kW - Rated current: approx. 11 A Pump & Pressure - Pump power: 0.55 kW - Flow rate: approx. 40 l/min - Head: approx. 60 m - Max. system pressure: 12 bar Machine Type Dwedpfozhn Tlex Apwea - Industrial temperature control unit - Peripheral device for injection molding and plastics processing

Year of construction: 2001, condition: used, Temperature range 140 °C heating capacity 6,6 kW Cooling capacity 18 kW weight of the machine ca. 72 kg HB-THERM HB-W 140 – Temperature Control Unit for Plastics Processing — ideal for injection molding and plastics processing facilities. Product description: The HB-W 140 temperature control units from HB-THERM (Grossenbacher Apparatebau AG, Switzerland) are proven peripheral devices for the precise temperature control of tools and machines. They are robust, reliable, and can be used with both water and oil. General Specifications - Manufacturer: HB-THERM (Grossenbacher Apparatebau AG), Switzerland - Model: HB-W 140 - Years of manufacture: 2001 Performance & Temperature Range - Heating capacity: 6.6 kW - Cooling capacity: 18 kW - Max. temperature: 140 °C Fluid - Suitable for: Water and oil - Application: Temperature control of injection molds and industrial tools Electrical specifications - Operating voltage: 380 – 420 V / 50 Hz - Connected load: approx. 7.2 kW - Rated current: approx. 11 A Pump & Pressure - Pump power: 0.55 kW - Flow rate: approx. 40 l/min - Head: approx. 60 m - Max. system pressure: 12 bar Dwodezhn Tfjpfx Apwja Machine Type - Industrial temperature control unit - Peripheral device for injection molding and plastics processing