A paddle buy used

Identified location: Ashburn (US) (Edit)
Enter your address
or
Move
4
Paddlemixer DIOSNA for up to 400 kg of dough (250 kg flour, 600 liters), removable bowls, incl. 2 bowls. 2 speeds, 1 timer. Dimensions: Brvyrtrg width: about 150 cm, depth: about 125 cm, height: about 145 cm, weight: about 950 kg more
4

Ribbon blender / paddle mixer Simo 3000L

Buckhurst Hill Essex, United KingdomUnited Kingdom dealership location
5937 km
used
Baptm8gf03 Simo 3000L ribbon blender / paddle mixer serial: 95-05925 stainless 3000L paddle mixer with continuos ribbon agitator, pneumatic doors to discharge product, PLC controlled, stainless guarded lid more
6
2x Used DINNISSEN Pegasus® Paddle Mixer Mixing capacity: 500L Folding Bottom Incl. Electrical Cabinet Incl. Weighing units Cij8wr8e Incl. Slides more
6

Paddle Mixer for 240 kg dough DIOSNA D 240 A Plus

Kirchheim , GermanyGermany dealership location
6677 km
1994
good (used)
Used Paddle Mixer DIOSNA, Type: D240A Plus in very good condition - for 240 kg dough / 150 kg flour - 1 slideable bowl - bowl in stainless steel 3xpc38thq - only 2 weeks in operation - Built-In: approx. 1994 - Condition: Very Good, ready for operation Inspection and testrun possible at any time. more
6

Vacuum Paddle Dryer 7000L mixer u u

Riesa, GermanyGermany dealership location
6796 km
used
Horizontal vacuum paddle dryer 7000 ltr. used Heated mixers stirred reactor dryers Double-walled mixer with heated walls and heated inner tube. With outlet, filling dome and service cover. Year of construction: 1997 Volume: 7,000 litres Temperature: 151 ° C 0ax99r0 Pressure / vacuum: 5 bar-1 bar (according to manometer) Gearbox output speed: approx. 42 RPM (i = 32.8) (1.400 rpm) transmission power: 50 kW Mixer room ø: approx. 1,600 x L 4.400 mm Gesamtabmasse: approx. 6,600 x ... more
2

Twin shaft paddle mixer Palmia 450L

Buckhurst Hill Essex, United KingdomUnited Kingdom dealership location
5937 km
used
Enjfiqnyq Palmia twin shaft paddle mixer 450L stainless twin shaft paddle mixer, forward/reverse, two side doors for product discharge more
3

Vacuum paddle mixer Cato paddle mixer

Buckhurst Hill Essex, United KingdomUnited Kingdom dealership location
5937 km
2000
used
Cato Psigna Model: AV200 Stainless vacuum paddle mixer, 200L, tilt discharge, equipped with tote lift loader. ideal for meat industries who are looking for efficiency and quality in their products through perfect, homogenous and perfect vacuum kneading, without heating or smearing the product. Suitable for kebab meat! more
1

Twin shaft paddle mixer Laska ME1000

Buckhurst Hill Essex, United KingdomUnited Kingdom dealership location
5937 km
2004
used
Cfqbanz Laska Twin shaft paddle mixer Model: ME1000 Stainless 1000L, forward/reverse, hydraulic side door discharge more
1

Twin shaft paddle mixer Apple

Buckhurst Hill Essex, United KingdomUnited Kingdom dealership location
5937 km
2010
used
Apple engineering Model: BM300 Contra-Rotating Twin Shaft Paddle Blender Stainless mobile 300L U trough blender, central bottom outlet, Sy0nfjkre more
1

EDGEBANDER (W/PRE-MILL & CORNER ROUNDING) I M A ADVANTAGE 500 L

North Carolina, United StatesUnited States dealership location
518 km
2010
used
Elect./Voltage: 600 V, 60 Cy, 3 Ph. Bccsm2ssht IMA Advantage 500 L Single sided Edgebander With Doucet Return ConveyorBasic Specifications:Edgebanding capacity, 0.3 - 3 mm; (0.012 - 0.118"), panel thickness min/max 8 - 60 mm (0.315 - 2.362").Equipped With: -- Pre-Milling Unit 08.379, with kW 4 x 2 (HP 5.3 x 2) vertical joining spindles, with SIKO digital readouts, particle & debris air jet blower. -- Glue System with "quick-look" system that can be apply hot-melt glue or PUR. -- Pressure... more


a paddle
daily

New machines via email!

Stay updated!
1

Milling machines Deckel FP 3 A

More Deckel Fp 3
Babberich, NetherlandsNetherlands dealership location
6320 km
1990
ready for operation (used)
Technical data X Achse500 mm Y - Achse300 mm Z - Achse400 mm SteuerungsartHeidenhain TNC 124 active WerkzeugaufnahmeIso 40 Number of controlled Aschen3 Vsiu3m more
10

Tischbohwerk TOS W 100 A

More Tos W 100
Akazienweg 29, 41334 Nettetal, DeutschlandGermany
6348 km
1991
good (used)
Engine type: Horizontal boring mill Make: boring machine TOS Bb9uxurnzk Type: W (A) 100; Year of construction: 1990 Control type: manual Location: Germany, Shipping time: immediately / on request Cargo base: From site / Foundation Price / euro / net: on request Technical details X travel: 1,600 mm Y travel: 1,100 mm Z path: 1250 mm Control: Digital display multivision 3-axis Table size Lxw: 1,250 x 1,250 mm speed: 0-1,120 K rpm Tool holder: Iso50 maximum table loading: 3,000 kg... more
5
x-travel:300 mm y-travel:220 mm Bbase2a83b z-travel:400 mm control:Contour 3 tool taper:SK 40 Table dimensions:630 x 330 mm speeds:31,5 - 3150 U/min rapid traverse:4,0 m/min quill stroke:65 mm dimensions of the machine ca.:1,8 x 1,5 x 2,2 m total power requirement: kW weight of the machine ca.:1300 kg more
1

EDGEBANDER (W/PRE-MILLING) I M A COMPACT PC 6220

North Carolina, United StatesUnited States dealership location
518 km
1999
used
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Bibopfg IMA COMPACT PC 6220 ... Production Edgebander with Pre-Milling & Corner Rounding -- Working Capacity:0.4 - 20 mm (3/4") Edgebanding thickness cap. (up to 3mm in coil); 10 - 50 mm panel thickness, 60 mm minimum panel width & 150 mm minimum panel length; -- Equipped With: -- Pre-Milling Unit, 2 x 3.0 KW (4.0 HP) vertical spindles - 12,000 RPM motor ea. 200 Hz, both w/jump movement and reversible rotation, SIKO digital readouts, particle & debris ... more
2

Abene VHF 360

Bremen, GermanyGermany
6440 km
2017
as good as new (ex-display)
Circoo2 more
5

Center Lathe AFM TUG 40x2000

More Afm Tug 40
Stockstadt, GermanyGermany dealership location
6564 km
2004
used
turning diameter over bed:450 mm turning diameter over slide rest:260 mm turning length:2000 mm centre height:217 mm swing diameter in throat:650 mm turning length in the crank:100 mm spindle bore:52 mm spindle taper DIN:55022/6 sleeve conus:5 MK :75 mm quill stroke:180 mm total power requirement:5,5 kW weight of the machine ca.:1,9 t dimensions of the machine ca.:ca. 3200x1020x1250 mm 3 jaw chuck Ø:200 mm tool post holder Multifix:Größe B fixed steady:Spannbereich bis 130 mm electrical chuck... more
1
Elect./Voltage: 480 V, 60 Cy, 3 Ph. Bhx7jrf IMA Novimat Concept ... Model I/G80/230/R3, High Speed/Volume Production EdgebanderWorking Capacity: -- Edge Capacity: Edgebanding thickness 0.4 - 3.0 mm, feed speed 8 - 30 MPM (26 - 98 FPM) ~ Panel thickness 10 - 60 mm (0.394 - 2.362"); Min Panel width 65 mm (2.559"), min panel length 150 mm (5.905"). -- Custom Pre-Milling Unit: Fixed vertical single spindle with mechanical up/down, in/out adjustment. Designed to clean-up a poor saw cut or chi... more
4

Hacksaw - Automatic BEHRINGER Super A-200

Dreieich, GermanyGermany dealership location
6568 km
1982
used
cutting diameter 200 mm band length 350 mm cutting lenght max. 600 mm cutting range max. 180 x 180 mm dimensions of saw-blade 350 x 35 x 2 mm no. of strokes 52/66/81/104/132/162 Hub/min coolant voltage 380 V total power requirement 3,0 kW weight of the machine ca. 470 kg Dkdve9sp8 more
1
grinding length:600 mm grinding width:275 mm workpiece height:375 mm max. table load:300 kg dimensions of grinding wheel:300x50x76,2 mm spindle drive:3-10,5 kW (100% ED) Clamping area:900x300 mm total power requirement:ca. 18 kW Gltmmq2 weight of the machine ca.:3300 kg Used / overhauled surface grinding machine, Make ELB, type Super Rubin 024 with 6-axis CNC Unicon. Machine no. 215160790 Machine bed made of micro-Granitan. Machine with precision-balanced through toothed belt. Infinitely var... more
6
OVERVIEW: Brand: Krauss Maffei Model: 3000-13000 A MC3-F Application type: Injection Moulding Machine type: Injection Moulding Machine Availability: 01/12/2019 Construction year: 1982 Production hours: 88951 Location: Germany Origin country: Germany GENERAL DATA: Measurements width: 17500 mm Measurements depth: 3000 mm Measurements height: 5000 mm Machine weight: 190000 kg CONTOL UNIT: Brand: Krauss Maffei Model: MC4 Nf7bp INJECTION UNIT: Stroke volume: 7240/18241 cm³... more
4

Eccentric Press - Single Column RASTER HR 35

Göppingen, GermanyGermany dealership location
6699 km
1965
used
pressure unbekannt t Nsenwyjx throat unbekannt mm stroke unbekannt mm total power requirement kW weight of the machine ca. t dimensions of the machine ca. m more
1
Elect./Voltage: 2toqozu FANUC ROBODRILLL A-T14IA CNC Drilling & Tapping Center -- Table size 25.59" x 14.96" -- Maximum table load 440 Lbs -- Spindle nose to table top 5.9" - 17.71" -- X-axis travel 19.6" -- Y-axis travel 14.96" -- Z-axis travel 11.81" -- Rapid traverse rate X,Y & Z 1889 IPM -- Cutting feed rate 0.1 - 787 IPM -- Spindle speeds 80 - 8000 RPM -- Spindle motor 7.5 HP -- Spindle taper BT 30 -- Tool changer capacity 14 station ATC -- Weight approx. 6,000 ... more
6
Electr. Port approx. 8,5 KW hydraulic pressure approximately 130 bar Sweep with paddle switch Briquette diameter 50/60 mm Length 2200 mm with the mounted control cabinet Length approx. 2000 mm without the attached Cabinet Container of dimensions 1500 x 1400 mm Tank internal dimensions approx. 1400 x 1400 mm Hydraulic unit outer dimensions L x W approx. 1000 x 500 mm Hydraulic power unit height 1250 mm with base (base approx. 340 mm Briquetting unit length 1850 mm 9ojbi9xqy Brique... more
5
grinding diameter:500 mm grinding length:2000 mm centre height:251 mm Tailstock spindle taper:4 MK max. workpiece weight between centres:500 kg coolant pump drive:0,6 kW workpiece spindle head::5 MK diameter / bore of grinding wheel:400/127 mm internal grinding extractor:auf schwenkbarem Schleifsupport face grinding attachement:auf schwenkbarem Schleifsupport table swiveable:mit Messuhr swiveling workpiece drive: Xl32vnvr : coolant system with paper filter: transformator: hydraulic uni... more
1

MAS VR 5 A

Günzburg, GermanyGermany
6749 km
good (used)
Bqweok2 more
6

Center Lathe MEUSER M 00 L

Göppingen, GermanyGermany dealership location
6699 km
1970
used
turning diameter over bed unbek mm turning diameter over slide rest unbek mm turning length unbek mm V7gkq9yor total power requirement kW weight of the machine ca. t dimensions of the machine ca. m more
1
Elect./Voltage: 220 V, 60 Cy, 3 Ph. Ncdgn 5' X 15" CARLTON 1A Radial Arm Drill Specifications: -- Working surface of base 76-1/2" x 43-1/2" with (4) 1-1/16" tee slots -- Spindle speeds (12) 25 to 1800 rpm -- Spindle taper #5 morse -- (6) spindle feeds .004 to .022 tpr -- (5) spindle threading feeds 8 - 11-1/2 - 14 - 18 - 27 tpi -- Spindle diameter 2-3/4" -- Spindle travel 14" -- Distance spindle to base 31" min. to 79" max. -- Max. distance center of spindle to column cas... more
3

Boy 55 A

Schwäbisch Gmünd , GermanyGermany
6698 km
2005
excellent (used)
Bzuhwer more
1
grinding length:650 mm grinding width:375 mm grinding height:375 mm Clamping area:900x300 mm grinding spindle drive:3,7/4,5 kW table speeds:2-28 m/min autom. cross feed adjustable:1-60 mm/Hub vertical feed autom.:0,002-0,06 mm vertical rapid traverse:0,15 m/min grinding wheel diameter:300 mm grinding wheel hole diameter:76,2 mm grinding wheel width:50 mm hydraulic pump:1,5 kW cross feed motor:0,3 kW vertical feed motor:1,7 kW weight of the machine ca.:2800 kg dimension (LxWxH) ca.:2800x1900x2400... more
6
universal milling head Technische Daten / technical details: X-Achse / X-travel 720 mm Y-Achse / Y-travel 240 mm Z-Achse / Z-travel 360 mm Drehzahlbereich / spindle speed 50-1600 UpM Tischgröße / table size 1050 x 250 mm Werkzeugaufnahme / spindle taper SK40 Gewicht der Maschine ca. / weight ca. 1500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Bczi0vt3nd Technical data, accessories and description of the machine are not binding. more
4

Eccentric Press - Single Column RASTER HR35

Göppingen, GermanyGermany dealership location
6699 km
1964
used
pressure unbekannt t throat unbekannt mm stroke unbekannt mm total power requirement kW weight of the machine ca. t dimensions of the machine ca. m E9cyk0r7y more
1
Elect./Voltage: 220/440 V, 60 Cy, 3 Ph. Bbu7xoijcm CARLTON 1A RADIAL DRILL -- Column diameter 11" -- Arm length 4' -- Face of column to spindle 48" MAX / 9" MIN -- Taper in spindle #4 MORSE -- Spindle diameter 2-1/2" -- Spindle traverse in head 12" -- Horizontal traverse of head 39" -- Vertical traverse of arm on column 28-1/2" -- Min/Max distance spindle to base 14" / 53" -- Height of base 8" -- Working surface of base 36" x 54" -- Spindle speeds(12) 60 to 1,500 RPM -- Spindl... more
6
Supermax FV102A Traverses XYZ: 1020 x 520 x 520mm Spindle Speed: 10000rpm Spindle Motor Power: 15kW Rapid Feedrates: XYZ: 36 x 36 x 24m/minute Control: FANUC 18M Tool Change Capacity: 24 Station Bczu3augzq Swing in the Gap:1120 x 520mm Non CE mark more
2

Plate Shear - Hydraulic KK-Industries KKI 3200 x 13 mm

Böheimkirchen, AustriaAustria dealership location
7118 km
2017
used
sheet width:3.200 mm plate thickness:13,0 mm distance between columns:3100 mm total power requirement:18,5 kW weight of the machine ca.:11700 t dimensions of the machine ca.:4,2x 2,050 x 2100 mm Clqjwgf technical data sheet thickness: 6 mm cutting length: 3.100 mm cutting angle: 1,5° back gauge: motorized 1.000 mm motor power: 15 kW length: 4.180 mm width: 2.400 mm heigth: 2.000 mm weight: 7.650 kg equipment swing cut construction NC-preselection system D-touch 7 with touch screen for back ... more
6

Milling Machine - Vertical WERNER, FRITZ 231

Göppingen, GermanyGermany dealership location
6699 km
1965
used
x-travel unbek mm y-travel unbek mm z-travel unbek mm total power requirement kW weight of the machine ca. t Dhhvddwn dimensions of the machine ca. m more
1

BAG HOUSE DUST COLLECTOR MAC 96-MCF-153

North Carolina, United StatesUnited States dealership location
518 km
used
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Bbu39tkg93 MAC 96-MFC-153 Baghouse Dust Collector with RAL15,000 CFM 10:1 Air to Cloth Ratio, 1484 sq. ft. of filter area in walk-in plenum, capacity for(153) filter bags 8" long x 5" dia. (bags not included - see new cost below) -- Motor/Fan Package: (1) 75 HP TEFC motor driving a ground-mounted paddle wheel material handling blower. -- Bag Cleaning: Via rotating arm for reverse air filter cleaning driven by 1/2 HP motor, positive displacement blower... more
15

Ford Mustang A-CODE Cabriolet 289 ci V8

Amsterdam, NetherlandsNetherlands dealership location
6218 km
1965
ready for operation (used)
22.500 €
Offer
Another 17 days
Cfwquli3 more
6

Dumper Volvo A 25 D - RNT

More Volvo A 25
Waregem, BelgiumBelgium dealership location
6190 km
2002
used
Field of application: Construction Make of engine: Volvo D10BADE2 EPA marked Bbwqgn3ahx Transport dimensions (LxWxH): 10.22x2.85x3.25 more
4

SCHEPENS N.V.

MA Barneveld, NetherlandsNetherlands dealership location
6274 km
ready for operation (used)
Nf827 more
5
swing diameter over slide rest:75 mm greates pass round over bed:180 mm control:Fanunc Series 21-T Ytgs8wajt bar material dia.: mm spindle turning speed range:20-6.300 U/min turret (x-stations):12-fach VDI 16 tail stock:ja/yes / pneumatisch dimensions of the machine ca.:1,65 x 1,2 x 1,8 m weight of the machine ca.:750 kg total power requirement:7 kW rapid travel - longitudinal/face:8 m/min turning length:140 mm turning diameter:140 mm c-axis:0,001 ° No barloader more


a paddle
daily

New machines via email!

Stay updated!

to

to

Edit search
A PADDLE
SELL IMMEDIATELY
with Europe's market leader for as little as € 0,49 per ad.
Find out more


Phone: +1 312 94 04 581
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machineseeker chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close