Used Adapter for sale (4,654)

Condition: as good as new (ex-display), Year of construction: 2026, CNC Machining Centers Rover Multi Up M C S Working Area*: X = 3280 mm; Y = from 1580 to 1660 mm, depending on work conditions Pedpfx Adsy Ehrxexerc Z = 200 mm – 5-axis machining unit and drilling unit, with vacuum modules H = 74 mm Z = 245 mm – 5-axis machining unit and drilling unit, with vacuum modules H = 29 mm Workpiece Clearance*: Y = 1900 mm Axis Travel*: X = 3706 mm; Y = 2294 mm; Z1 = 515 mm; Z2 = 371 mm VACUUM SYSTEM Subdivision of the vacuum system into 2 working zones and 2 clamping zones in X. AUXILIARY VACUUM SYSTEM – 2 zones Allows clamping of workpieces using vacuum templates. Remote Control RM850 Rover Multi Up M C S Panel – Multi Purpose Regular Configuration 2 Compatible with the turret tool magazine with 16 positions and the side tool magazine with 12 positions. The tool magazines can also be retrofitted. Uninterruptible Power Supply (UPS) for machine PC. 6 ATS workpiece supports – 18 module carriers — 6 aluminium workpiece supports. The positioning of the workpiece supports is via linear guides with ball bearing slider blocks. Clamping is performed on the front and rear linear guides via pneumatic cylinders. Clamping is released by a push button located at the front of the workpiece support. — 18 module carriers, 132 x 132 x H 41.5 mm, with independent pneumatic clamping. The vacuum modules can be rotated in 15° increments on the module carriers; an ideal solution for shaped parts. — 18 covers for module carriers without template. SA (Set-Up Assistant) working table for tables up to 1550 mm. Supported manual positioning system with motion direction indicator and position indicator. — Sensors on each working table and along the X-axis of the working area. — Display of direction and position achieved for the carriage during positioning phase, mounted on each working table. According to the programmed configuration of the working tables, the system indicates the direction of movement for each working table and carriage, and confirms with a green LED and audible signal when the correct position is reached, with a tolerance of +/- 1.5 mm. Subdivision of the pneumatic system into 2 working areas in X. Machining unit with 5 interpolating axes, 13 kWp (17.4 HP), with HSK F63 adapter, liquid-cooled – 20,000 rpm Extraction hood with 12 NC-controlled positions for the 5-axis electrospindle. Flange for preparation of a 5-axis interpolating machining unit for mounting aggregates. Coolant system Additional Z-axis carrier for rear machining units, with independent Z-axis. Drilling head BH 24 L Side tool magazine with 12 positions, integrated into the machine bed. Turret tool magazine with 16 positions, installed directly on the X machining unit. HSK F63 tool adapter, equipped with a long integrated flange, for saw blades on the 5-axis head. Saw blade 300 mm, for tool holder. Hi-Tech tool set Complete set of tools for the acceptance test Consisting of the following 9 parts Replacement of standard PC with a high-performance PC. Digital device for measuring tool length up to 130 mm diameter. bSolid NC-HOPS 8 MacroCAM Rover 1. AV NC-HOPS MacroCAM 1. License WorkCenter suction cup proposal 5-Axis Simultaneous Material removal simulation 12-month warranty period Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2026, Weima Hacker/Shredder WL 8 with Top Equipment - Four-sided segment floor, discharge auger with geared motor, double blade row, log spacer, fast reverse hydraulics with shock valve The single-shaft shredder WL 8 is a proven classic for shredding wood waste of all kinds. It is used thousands of times in wood processing companies worldwide. The high number of these highly sought-after shredders guarantees a proven and reliable technology at the best price-performance ratio. The machines are characterized by their very robust design, which ensures extremely high durability (even outdoors). Intuitive operation thanks to Siemens PLC control with touch display To ensure that the electronics are optimally adapted to the machine, we design, build and wire our control cabinets ourselves. We use only high-quality components – for example, from Siemens or Rittal. Intuitively operated touch interfaces guarantee quick adjustments. Functions such as setting the slide timing or stop ensure a high throughput. The built-in overload protection also prevents damage to the machine. No material bridging thanks to self-cleaning hopper design The hopper performs several tasks. First, the material to be shredded is fed into it – manually, mechanically or via a conveyor belt. The generous opening also makes it easy to fill in very large parts. However, its special design, which is rounded at the front and thus effectively prevents material bridging, is decisive for the shredding process. Even with bulky parts, the shredder cuts itself free. If required, both hopper extensions and lids with gas springs are available. Durable rotor bearings thanks to offset design A rotor bearing must be particularly robust due to the extreme stress it is subjected to during the shredding process. To prevent dust or foreign matter from entering its interior, we have separated it from the machine frame. This also makes it very easy to maintain and access. Rotor diameter (mm): 260 Rotor length (mm): 1000 Rotor speed (RPM): 80 - 125 Power (kW): 22 Number of blades: 54 Available blade sizes (mm): 40 x 40 Particle size (mm): Suction nozzle (mm): 200 Feed opening (mm): 1000 x 1250 Length (mm): 2045 Podpsmhh Idjfx Adxorc Width (mm): 1740 Height (mm): 1840 Weight (approx. kg): 2200 Screen size: 15/20 Accessories: - 2nd blade row - Log spacer - Four-sided segment floor - Discharge auger with geared motor - Fast reverse hydraulics with shock valve Location: Available in warehouse 54634 Bitburg

Condition: used, mileage: 32 km, power: 125 kW (169.95 HP), first registration: 10/2026, fuel type: diesel, overall weight: 3,300 kg, color: white, gearing type: automatic, number of seats: 8, total length: 5,450 mm, total width: 2,275 mm, total height: 1,994 mm, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), parking heater, soot filter, Internal number: 4725.CHO26.TB25966 Errors and prior sale excepted! ----SPECIAL EQUIPMENT * Trailer hitch, electrically swiveling * Exclusive Package: Panoramic sunroof - Rear seat package 21 (6 rear seats, sliding doors, left and right, 2nd row with 3 individual seats, outer seats heated, middle seat with folding table on the backrest, 3rd row with individual seats) - 15 B&O speakers - Ambient lighting * Fuel tank 70 l * Heated steering wheel * Matrix LED headlights, adaptive - LED low beams incl. all-weather lights - LED high beams, glare-free - LED daytime running lights incl. integrated LED turn signals in front - LED cornering lights, static - Speed-dependent headlight range control - LED taillights * Auxiliary heater (fuel-operated water heater) with remote control incl. H7 AGM double battery * Technology Package 6: Exterior mirrors, electrically adjustable, heated and foldable - Audio system with 13-inch multifunctional display, Ford SYNC 4 - Blind Spot Information System incl. CTA with trailer detection - Rear collision warning system - Pre-Collision Assist, camera and radar-based - Driver drowsiness warning - Lane Keeping Assist, Lane Departure Warning, Lane Change Assist, Lane Keeping Aid - Traffic sign recognition - Wrong-way driver warning function - Parking Assist System front/rear - Adaptive cruise control incl. Stop&Go function - Intelligent speed limiter with speed limit display - 360° camera - Steering wheel in Sensico leather-look ADDITIONAL EQUIPMENT * 2-stage unlocking for passenger compartment and cargo area * 3 USB ports for the 2nd row of seats * ABS * Airbag, passenger side - with airbag deactivation function * Airbag, driver side * Airbags: Side airbags - left and right * All-wheel drive * Overhead console * Roof rails, silver * Theft alarm THATCHAM - with interior monitoring in the driver's cabin and cargo area incl. central locking with additional double locking * Vehicle modem - WLAN hotspot, 5G modem (up to 5G/LTE, for up to 10 mobile devices) * Power windows, front, electric - with quick-up/down function * Parking brake, electric * Ford Key Free system - incl. Ford Power start function * Windshield, heated * Glove compartment with locking lid * Automatic climate control, 3-zone - with automatic temperature control for driver and passenger side as well as rear, separately adjustable - Auxiliary heater, electric - Electric temperature control in the rear * Charging station, inductive in the center console, for mobile devices * Center console, large * Driver drowsiness warning * Emergency Assistance Call eCall * Picnic light * Tire repair kit Prsdpfx Adez Tdpfexec * Tire pressure monitoring system * Wheels: Alloy wheels 6.5 J x 17 in Active Design, with Y-spokes, in Absolute Black with 215/60 R17C 109/107T tires * Windshield wipers with rain sensor * Sliding door, with power assist * Sliding door, left and right incl. roller blinds in the 2nd row of seats * Rail-based flexible seating system * Side windows, fixed, second and third row * Seat Package 29: Passenger single seat, 4-way manually adjustable - Driver seat, 5-way electrically adjustable - Seat heating for driver and passenger - Armrest, inside and outside - Lumbar support - Side airbags, left and right, head-shoulder airbags in front, left and right - Partial leather upholstery * Start-stop system * Socket: 12-volt connection - in the passenger compartment * USB port, front * Lashing eyes 4 * Engine immobilizer * Heat-insulating glazing, medium tint * Central locking w

Condition: used, Technical details: air flow rate: - m³/h suction stud diamter: 160x45 mm Prodpsu Nwv Hsfx Adxoc weight of the machine approx.: 68 kg dimensions L x W x H: 650x600x2300 mm dust suction device without fan (without suction mechanic) installed on a steel fram with 4 base stands, Filter: filter drum Dia.=360x520mm, rotatable manual, space of filter size W:580xWB:560xH:750mm -intake (suction) conection diameter 160x45mm (sideways) - dirt ejection diameter = 280x110mm , bottom opening - exhaust opening diameter=160mm ( ceiling) via flange bolted diameter=250mm and angular adapter dia. = 145mm *

Condition: used, Technical details: Volt: 380 V Ampere: 70 A charging voltage: 48 V total power requirement: ca. 1,7 kW Pjdpfxou Nu S Ej Adxorc weight of the machine approx.: 100 kg space requirements approx. LxWxH: 0,5x0,6x0,8 m Battery charger for electric forklift, electric pallet truck - with charging cable Accessories: - Adapter cable Condition: used, our sale as is and described, without test *

Condition: used, Year of construction: 2010, Technical details: spindle passage: 92 mm turning length: 1000 mm z-axis: min.: 404 mm z-axis: max. 1130 mm facing movement (x-axis): min./max.:15 / 335 mm control: Sinumerik SL840D max. torque on the spindle: 2500 Nm tool turret: 12 tools axial operating pressure: 6,0 bar rapid traverse: 20 m/min total power requirement: 88 kVA dimension machine xH: ca. 4,45 x m dimensions of the bar loader L-W-H: ca. L: 5,7 x B: 2,65 x H: 2,4 m CNC lathe with bar loader - inclined bed lathe -SL 840D control with NCU software 2.6, system software 1.4, store turn software 6.4, with one orientable C-axis, without driven tools -KNCS 260-72 chuck, SMW Autoblok -Clamping force generator via clamping cylinder VNK-200/86 / SMW Autoblok -Measuring system Fa. Heidenhain -Sauter VDI50 tool disk turret, electric drive Bar loaderMaster 80HF, type 33LL: -Dimension round material min./max.: Ø 20mm / 80mm -Minimum length of the workpiece: 33-38-43 to 1000mm -Maximum length of the workpiece: 33 - 3300mm / 38 - 3800mm / 43 - 4300mm -Feed speed (adjustable) 150mm/sec. - Return speed (adjustable) 950mm/sec. -max. offcut length: Ø 8+65mm = 400mm / Ø 66+80mm = 250mm -min. remnant 120mm Chip conveyor / hinged belt from Richter, type SP 450/63 -Discharge height = 1000mm, discharge side right Accessories: -div. tool holders VDI 50 -sizing adapter SK50-> VDI 50 -Power chuck Hainbuch Toplus Kombi Ax-zug GR100 -div. sleeves, guide jaws for bar loader Ø 20 - 75mm i.D. Pjdpfewf Nrasx Adxsrc *

Condition: good (used), mileage: 145,010 km, power: 125 kW (169.95 HP), first registration: 01/2022, fuel type: diesel, tire size: 235/65R16, axle configuration: 4x2, wheelbase: 4,330 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 3, total length: 7,150 mm, total width: 2,150 mm, total height: 3,080 mm, loading space length: 4,300 mm, loading space width: 2,080 mm, loading space height: 2,120 mm, Equipment: ABS, Apple CarPlay, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, power mirror, tail-lift, traction control, = Additional Options and Accessories = - Heated mirrors - Halogen lamp - None - Tail lift - Manual - Radio/cassette - Reversing camera - Fabric = Notes = Configuration: 4x2, Payload: 980 kg, Unladen weight: 2520 kg, Gross vehicle weight: 3500 kg, Trailer load, unbraked: 750 kg, Trailer load, center axle, braked: 2000 kg, Type of cab: Single cab, Cruise control, Air conditioning, Number of airbags: 2, Parking assistance: None, Electric windows, Electric mirrors, Radio/cassette, Carplay, Color: White, Heated mirrors, Reversing camera, Lighting type: Halogen lamp, Air conditioning, Bluetooth, Engine power: 125 kW (168 hp), Number of cylinders: 4, Engine displacement: 2143 cc, Fuel: Diesel, Euro: 6, Drive technology: Timing chain, Transmission type: Automatic, Power steering, ABS, ASR, Starter battery, Roof rack: None, Closure at the rear: Tail lift, Central locking, Number of seats: 3, Seat arrangement: 1+2, Seat cover: Fabric, Seat adjustment: Manual, Tail lift, Tail lift design: Rear door, Load capacity of the tail lift: 750 kg, Tail lift manufacturer: Sorensen, Tail lift material: Steel and aluminum, Tail lift size: 212x160, ac automatic EURO6 carplay distronic cruise control adaptive, Tire type: Winter tires = Additional Information = Axle configuration Tire size: 235/65R16 Brakes: Disc brakes Suspension: Leaf spring suspension Axle 1: Tire tread depth left: 2 mm; Tire tread depth right: 2 mm Axle 2: Tire tread depth left: 2 mm; Tire tread depth right: 3 mm Weights Unladen weight: 2,520 kg Predozz H Uuopfx Adxjc Payload: 980 kg GVW: 3,500 kg Functional Tail lift: Sorensen, Rear door, 750 kg Height of loading platform: 90 cm Maintenance APK (Technical Inspection): valid until 04.2027 Condition Technical condition: good Optical condition: good Damage: none Number of keys: 1 Financial Information Leasing price: 562 € per month (van, 72 months); Please inquire for further information and conditions Identification License plate: VZR-60-F

Condition: good (used), mileage: 125,133 km, power: 100 kW (135.96 HP), first registration: 08/2021, fuel type: diesel, tire size: 205/65R16, axle configuration: 4x2, wheelbase: 3,200 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, number of seats: 3, total length: 5,240 mm, total width: 1,900 mm, total height: 1,910 mm, loading space length: 2,830 mm, loading space width: 1,680 mm, loading space height: 1,390 mm, Equipment: ABS, Apple CarPlay, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, power mirror, seat heater, traction control, trailer coupling, = Additional Options and Accessories = - Halogen lamp - None - Manual - Radio/cassette - Partition = Notes = Number of axles: 2, Configuration: 4x2, Tare weight: 2081 kg, Gross vehicle weight: 3050 kg, Tow hitch, Type of cab: Single cab, Cruise control, Air conditioning, Number of airbags: 2, Parking assistance: None, Electric windows, Electric mirrors, Partition, Radio/cassette, Carplay, Color: White, Lighting type: Halogen lamp, Seat heating, Bluetooth, Engine power: 100 kW (134 Hp), Engine displacement: 1950 cc, Fuel: Diesel, Euro: 6, Drive technology: Timing chain, Transmission type: Automatic, Power steering, ABS, ASR, Starter battery, Body type: extended, Side panels, Roof rack: None, Side doors: 1, Rear closure: Double door, Central locking, Number of seats: 3, Seat arrangement: 1+2, Seat upholstery: Leather, Seat adjustment: Manual, L2 | Automatic | Tow bar | Multifunction steering wheel | Adaptive Cruise Control | 3 seats | Air conditioning | Carplay |, Tire type: All-season tires = Additional Information = General Information Number of doors: 1 License plate: KLEYN1 Axle configuration Tire size: 205/65R16 Brakes: Disc brakes Suspension: Coil spring suspension Axle 1: Tire tread depth left: 7 mm; Tire tread depth right: 7 mm Axle 2: Tire tread depth left: 5 mm; Tire tread depth right: 5 mm Weights Unladen weight: 2,081 kg Payload: 969 kg GVW: 3,050 kg Functional Loading area height: 57 cm Interior Upholstery: Leather Condition Technical condition: good Optical condition: good Damage: none Number of keys: 2 Financial Information Leasing price: €325 per month (delivery van, 72 months); Ask for further information and conditions. Podpfxoz R N Ups Adxerc

Condition: excellent (used), Year of manufacture: 2026 Carrying capacity: 38.370 kg GVW: 11.130 kg Technical condition: very good Visual appearance: very good Please contact Christian Theißen for more information Manufacturer: Faymonville Model: Multimax Plus Year of build: 2026 Condition: New Data: Equipment: BPW axles and suspension, 1st and 2nd axles fixed, 3rd axle steerable. 3rd axle with electro-magnetic reverse lock via reverse gear and manually activatable. Technical axle load: 12,000 kg. Single-coat sand coating on the cover plates of the gooseneck as well as in the transition areas between the neck and the lifting bed, between the lifting bed and the loading surface, and between the loading surface and ramps. 1 spare wheel with mounting adapter under the loading surface on the right in front of the axles. Cutouts in the outer frame of the loading surface and the lifting bed for hooking in tension straps (LC 2,000 daN). Total dimensions LxWxH: 9,60 x 2,54 m Number of axles: 3 Payload: 38.370 kg Empty weight: +/- 11.130 kg Total permissible weight: 49.500 kg Information: sample images Prsdpfx Adezdizisxoc Information: Location: Essen immediately available.

Condition: used, mileage: 30,688 km, power: 382 kW (519.37 HP), first registration: 01/2026, fuel type: diesel, overall weight: 35,000 kg, axle configuration: > 3 axles, next inspection (TÜV): 01/2027, color: white, gearing type: automatic, total length: 8,600 mm, total width: 2,550 mm, total height: 3,450 mm, loading space length: 5,600 mm, loading space width: 2,420 mm, loading space height: 1,000 mm, Year of construction: 2026, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, MAN TGS 35.520 8X4 BB CH, MEILLER three-sided tipper with hydraulic side wall on the left First registration: 13.01.2026 Mileage: only 30,688 km Unladen weight: 14,596 kg Wheelbase: 2,980 mm Diesel tank: 390 liters Euro-6e engine with 520 hp Variable high-performance engine brake EVBec STEERING BRAKE (the steering brake reduces the radius of the curve and thus increases maneuverability on uneven terrain in vehicles with a rear tandem axle. This improves maneuverability in tight construction sites and on slippery surfaces. Simple activation and display via a control button on the dashboard) Braking function: paver brake Automated manual transmission, 12-speed MAN TipMatic 12.28 OD AP rear axles for heavy terrain Transmission function: Idle Speed Driving, rocking function, and performance mode Tires: Front axles: 4 x 385/65 R 22.5 Rear axles: 8 x 315/80 R 22.5 Suspension type: Parabolic leaf spring suspension, front axles: 3-leaf, rear axles: 5-leaf, towing hitch on the rear crossmember, 2-line trailer brake connection, trailer socket 15-pole, trailer socket ABS ????? Long cab with 1 bunk, cab mounting: Comfort, extendable refrigerator, driver comfort package, construction site package +, trailer package, heated driver comfort seat + MAN sound system, MAN truck navigation Europe, control panel in the driver's door: EasyControl, STABO CB radio, air conditioning: CLIMATRONIC, auxiliary heater: hot water, rain sensor, LED daytime running lights, LED fog lights, LED turning lights, 2x rotating beacons on the cab, entrance lighting, FULL-LED lighting EBS, ABS Offroad with additional terrain logic, ESP, ASR, adaptive cruise control with stop-and-go function, emergency braking assistant EBA, lane departure warning system LDW, full braking assistant, emergency braking signal, automatic hazard light activation, driver attention alert, traffic sign recognition, turning assistant ????? MEILLER three-sided tipper TRIGENIUS D421 Dimensions i.L. (LxWxH): 5,600 x 2,420 (pallet width) x 1,000 mm, front wall: 1,200 mm + deflectors: 150 mm Floor: HardoX steel HB450, 6 mm Side walls: HardoX steel HB450, 4 mm Prodpfxjz Tdqpe Adxec Side wall on the left: BORDMATIC, hydraulically operated, opens 180° Side wall on the right: pivoting, with central locking Rear wall: HardoX steel HB450, 4 mm, pivoting 450 mm discharge chute at the tipping bridge, welded Metering device by means of locking pins on the discharge chute Folding lashing eyes 2,000 kg as well as plug-in lashing eyes 8,000 kg in the corners of the tipping bridge floor Load space monitoring of the tipping bridge with 2x LED work lights and a camera RENTING is the new BUYING, with us also available in a full-service rental, IMMEDIATELY available.

Condition: used, Year of construction: 1997, offer consists of: Theisen & Bonitz booklet maker - collating unit type 310 (10 stations) - stiching, folding and cutting unit type 303 collating unit type 310: - v-belt drive Predpfxj Aa S D Ae Adxec - suction is adapted to pile height - double-, jam- and misfeedcontrol - safety device - bins: 10 - format: min. 7x10cm, max. 35x50cm - paper weight: 18-800g/qm - capacity: max. 3500 cycles/h stiching, folding and cutting unit type Theisen & Bonitz 303 QSM - folding unit moveable on guide rails - knife unit - photocell check - format cutted: min.65x154mm, max. 350x800mm - capacity: max. 4000 cycles/h - thickness: 5mm edge stitching, 2mm eyelet binding - weight: 550kg - electricity: 220/380 Volt/ 50Hz- 1,5kW - dimension: 147x230cm We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs

Condition: excellent (used), functionality: fully functional, mileage: 29,119 km, power: 130 kW (176.75 HP), fuel type: diesel, gearing type: automatic, overall weight: 3,100 kg, empty load weight: 1,868 kg, maximum load weight: 1,232 kg, first registration: 06/2025, next inspection (TÜV): 08/2028, loading space length: 2,800 mm, loading space width: 1,260 mm, loading space height: 1,300 mm, emission class: euro6, color: white, number of seats: 3, number of previous owners: 1, Year of construction: 2025, machine/vehicle number: MFZ5196, Equipment: ABS, air conditioning, airbag, all-season tires, car registration, central locking, cruise control, electronic stability program (ESP), immobilizer system, navigation system, onboard computer, parking sensors, power assisted steering, second-hand vehicle warranty, sliding door, soot filter, traction control, truck registration, Special equipment: Assist package, equipment package: Techno Nav, exterior mirrors electrically adjustable and heated, both sides, Comfort package, Converter package, rear wing doors with windows, interior release for sliding door, reinforced LED boot light, full-size spare wheel, sliding window in the front load/passenger compartment (2nd row of seats), sliding doors left and right, Surround View package, pre-installation for second air conditioning compressor, pre-installation for seat belt warning system. Podpfx Ao Abunmsdxerc Additional features: 4 speakers, adaptive brake light, driver/passenger airbags, audio system: radio with USB including Bluetooth and DAB radio reception, electrically adjustable and heated exterior mirrors, rear parking assist, driver assistance system: autonomous emergency brake assist (AEB), driver assistance system: hill start assist, driver assistance system: forward collision warning, driver assistance system: speed warning display, driver assistance system: lane keeping assist, speed control system (cruise control) with distance control, automatic transmission (8-speed), rear wing doors without windows, bodywork: panel van, charging cable with type 2 plug (mode 3), bulkhead, multifunction steering wheel for audio control, Luxury package, model update, engine 2.0 L - 130 kW BlueHDi, black 16" wheel hub covers, wheelbase 3275 mm, tire repair kit, tire pressure monitoring system, low emissions according to Euro 6e standard, H4 headlights, right side sliding door, service system: Connect Box (microphone, speaker, SOS button, SIM card), height-adjustable driver's seat with lumbar support and armrest, height-adjustable driver's seat with lumbar support and armrest, double passenger bench right with storage under the bench, front seats with armrests and headrests, start/stop system, 12V socket in the glove compartment, solid paint finish.

Condition: reconditioned (used), Year of construction: 1984, Graver grinding machine Make: Deckel Model: S0E Year of manufacture: 1984 - overhauled, repainted RAL7035 light grey / RAL7012 basalt grey Mach. no.: 84-5532 with guarantee Accessories: - Machine stand - Microscope with support - Integrated dust extraction - Grinding wheel with flange - Pulling tool - Operating instructions Prodpfxoqctp Ss Adxjc Incl. installation of an on/off switch with undervoltage release to implement restart protection e.g. in the event of a power failure or when the power plug is pulled incl. production of a mounting adapter plate - Used, as seen -

Condition: excellent (used), functionality: fully functional, mileage: 29,526 km, power: 130 kW (176.75 HP), fuel type: diesel, gearing type: automatic, overall weight: 3,100 kg, empty load weight: 1,868 kg, maximum load weight: 1,232 kg, first registration: 04/2025, next inspection (TÜV): 08/2028, loading space length: 2,800 mm, loading space width: 1,260 mm, loading space height: 1,300 mm, emission class: euro6, color: white, number of seats: 3, number of previous owners: 1, Year of construction: 2025, total length: 5,331 mm, total width: 1,924 mm, total height: 1,865 mm, fuel: diesel, Equipment: ABS, Android Auto, Apple CarPlay, USB port, air conditioning, airbag, all-season tires, car registration, central locking, cruise control, electronic stability program (ESP), immobilizer system, navigation system, onboard computer, parking sensors, power assisted steering, rear view camera, second-hand vehicle warranty, sliding door, soot filter, tire pressure monitoring, traction control, truck registration, Special equipment: Assist package, equipment package: Techno Nav, exterior mirrors electrically adjustable and heated, both sides, Comfort package, Converter package, rear wing doors with windows, interior release for sliding door, reinforced LED boot light, full-size spare wheel, sliding window in the front load/passenger compartment (2nd row of seats), sliding doors left and right, Surround View package, pre-installation for second air conditioning compressor, pre-installation for seat belt warning system. Additional features: Preds Abu Tvjpfx Adxjc 4 speakers, adaptive brake light, driver/passenger airbags, audio system: radio with USB including Bluetooth and DAB radio reception, electrically adjustable and heated exterior mirrors, rear parking assist, driver assistance system: autonomous emergency brake assist (AEB), driver assistance system: hill start assist, driver assistance system: forward collision warning, driver assistance system: speed warning display, driver assistance system: lane keeping assist, speed control system (cruise control) with distance control, automatic transmission (8-speed), rear wing doors without windows, bodywork: panel van, charging cable with type 2 plug (mode 3), bulkhead, multifunction steering wheel for audio control, Luxury package, model update, engine 2.0 L - 130 kW BlueHDi, black 16" wheel hub covers, wheelbase 3275 mm, tire repair kit, tire pressure monitoring system, low emissions according to Euro 6e standard, H4 headlights, right side sliding door, service system: Connect Box (microphone, speaker, SOS button, SIM card), height-adjustable driver's seat with lumbar support and armrest, height-adjustable driver's seat with lumbar support and armrest, double passenger bench right with storage under the bench, front seats with armrests and headrests, start/stop system, 12V socket in the glove compartment, solid paint finish.

Condition: reconditioned (used), Year of construction: 1986, Graver grinding machine Make: Deckel Model: S0E Year of manufacture: 1986 - overhauled, repainted RAL7035 light grey / RAL7012 basalt grey Mach. no.: 86-5751 with guarantee Accessories: - Machine stand - Integrated dust extraction - Grinding wheel with flange - Pulling tool - Operating instructions Incl. installation of an on/off switch with undervoltage release to implement restart protection Podsqctnispfx Adxerc e.g. in the event of a power failure or when the power plug is pulled incl. production of a mounting adapter plate Used as seen The machine is technically compliant with the state of the art at the time of manufacture.

Condition: used, BAT Shaker Fixture Cube / Clamping Cube Magnesium Shaker Fixture Cube Professional clamping cube for vibration testing rigs / shakers with an M8 thread grid for flexible test specimen mounting For sale is a used clamping cube for vibration and shock testing rigs. The adapter cube is used to securely hold test specimens on vibration testing rigs (shaker systems). Thanks to the numerous threaded holes on several sides, a wide variety of devices and test specimens can be flexibly mounted. The lightweight magnesium construction offers high rigidity with a comparatively low weight and is ideal for development, endurance, and environmental testing. Technical data: Manufacturer: BAT Type: Shaker Fixture Cube / Clamping Cube Material: Magnesium Threaded holes: M8 grid on several sides Dimensions (approx.): 300 × 300 × 300 mm Weight: approx. 28–32 kg (estimated) Features: Solid magnesium design M8 thread grid on several sides Two stop eyes Precision-machined clamping surfaces High rigidity with low weight Ideal for individual test setups Accessories as shown in the pictures Areas of application: Vibration testing rigs Shock testing Environmental simulation Automotive testing technology Aerospace Development and testing laboratories Quality assurance Prjdpfszkgqnjx Adxsc Industry Scope of delivery: Magnesium Shaker Fixture Cube Accessories as shown in the pictures Condition: Used Optical condition as shown in the pictures. Normal signs of wear and tear, scratches and marks are present. The table shown in the photos and other items not explicitly mentioned are not part of the sale. Shipping via parcel service is possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: used, Labotek Type: FMD-M-M-15-15-V, Model 101134 The Labotek FMD-M-M-15-15-V model belongs to the FMD-M series from Labotek, a leading manufacturer of systems for material drying, dosing, and conveying in the plastics industry. The FMD-M series includes modular dryers designed for processing plastic granules. Technical specifications of the FMD-M series: Type designation: FMD-M 15/15 Dimensions: 80 x 120 x 120 cm Net weight: 88 kg Shipping weight: 113 kg Shipping dimensions: 80 x 120 x 120 cm Shipping volume: 1.15 m³ These dryers are designed for processing plastic granules and are characterized by their modular design, which allows for flexible adaptation to various production requirements. Volts: 3x400 Vac+PE Amps: 10.4 Amps Overcurrent protection: 16 Amps kW: 2.6 kW HZ: 50/60HZ The Labotek AVR3G is an industrial vacuum conveyor with a capacity of 1 liter, designed for the automatic conveying of free-flowing plastic granules. It is particularly suitable for small to medium-sized production facilities where space and weight are critical. Technical data of the Labotek AVR3G (1 liter): Capacity: 1 liter Conveying capacity: Up to 15 kg/h Conveyed medium: Free-flowing, granular raw material (minimum grain size of 3 mm) Operating noise level: Below 69 dB Prodpfx Ajzii Dbedxec Material contact surfaces: Stainless steel AISI 304 Maximum material temperature: 80 °C Alarm function: In case of material shortage Power supply: Compatible with 50/60 Hz Weight: 88 kg Condition: used Scope of delivery: (See picture) (Subject to changes and errors in technical data and specifications!) We will be happy to answer any further questions you may have by phone.

Condition: used, mileage: 824,000 km, power: 222 kW (301.84 HP), first registration: 05/2017, fuel type: diesel, overall weight: 20,500 kg, axle configuration: 2 axles, next inspection (TÜV): 03/2027, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, Additional information: * Maximum axle load | Second axle: 11500 kg * Payload: 12014 kg * Width: 2550 mm * Tire size | Second axle: 315/80 R22.5 * Wheelbase: 375 cm * Tire size | First axle: 385/65 R22.5 * Height: 3900 mm * Length: 5960 mm * Tire tread depth inner left | First axle: 80% * Tire tread depth inner right | First axle: 80% * Tire tread depth outer left | Second axle: 80% * Tire tread depth inner left | Second axle: 80% * Tire tread depth outer right | Second axle: 80% * Tire tread depth inner right | Second axle: 80% * Maximum axle load | First axle: 8000 kg * Type | First axle: Prometeon R * Type | Second axle: Prometeon R * Cab: Yes * Position | First axle: Front * Brand | First axle: Other Predpfx Adozkfc Nexjc * Brake type | First axle: Disc brakes * Suspension | First axle: Air suspension * Steering | First axle: Yes * Position | Second axle: Rear * Brand | Second axle: Other * Brake type | Second axle: Disc brakes * Suspension | Second axle: Air suspension * Reduction | Second axle: Single reduction * Twin tires | Second axle: Yes * Driven | Second axle: Yes * Differential lock | Second axle: Yes Additional equipment: * 27 MC / CB * Adaptive cruise control * Aluminum fuel tank * Anti-lock braking system * Anti-slip control * Automatic climate control * Hill start assist * Bluetooth * Differential lock * Double glazing * Double fuel tank * Electric windows * Electrically adjustable exterior mirrors * Electronic braking system (EBS) * ESP * Cruise control * Homepage * Air conditioning * Refrigerator * Air suspension * Air-suspended seats * Navigation system * Fog lights * Particulate filter * Radio/CD player * Retarder * Disc brakes * SemCollection * SemStars * Side skirts * Spoiler * Parking heater * Parking air conditioning * Xenon lighting * Central locking Semtrade B.V. Contact | Martin Klaaijsen | Tel: | Whatsapp: | Email: Export costs | Please inquire in advance about the costs and procedures for your respective country Location | Maasdijk (NL) | 140 km from the border | 20 km from Rotterdam The Hague Airport Disclaimer: Subject to changes, prior sale and errors.

Condition: used, mileage: 1,015,000 km, power: 250 kW (339.91 HP), first registration: 04/2016, fuel type: diesel, overall weight: 19,500 kg, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, Additional information: * Load capacity: 11108 kg * Maximum axle load | Second axle: 11500 kg * Width: 2550 mm * Tire tread depth inner left | First axle: 30% * Tire tread depth inner right | First axle: 30% * Tire tread depth outer left | Second axle: 30% * Tire tread depth inner left | Second axle: 30% * Tire tread depth outer right | Second axle: 30% * Tire tread depth inner right | Second axle: 30% * Tire size | Second axle: 315/70 R22.5 * Wheelbase: 380 cm * Tire size | First axle: 385/65 R22.5 * Height: 3900 mm * Length: 6160 mm * Maximum axle load | First axle: 8000 kg * Type | First axle: Goodyear R * Type | Second axle: Goodyear R * Cab: Yes * Position | First axle: Front * Brand | First axle: Other * Brake type | First axle: Disc brakes * Suspension | First axle: Parabolic springs * Steering | First axle: Yes * Position | Second axle: Rear * Brand | Second axle: Other * Brake type | Second axle: Disc brakes * Suspension | Second axle: Air suspension * Reduction | Second axle: Single reduction * Twin tires | Second axle: Yes * Driven | Second axle: Yes * Differential lock | Second axle: Yes Additional features: * Adaptive cruise control * Aluminum fuel tank * Anti-lock braking system (ABS) * Anti-slip regulation (ASR) * Automatic climate control * Roof spoiler * Differential lock * Double fuel tank * Electric windows * Electrically adjustable exterior mirrors * Electronic Braking System (EBS) * ESP * Website * Air conditioning * Refrigerator * Air suspension * Fog lights * Parabolic suspension * Particle filter * Radio/CD player * Disc brakes * SemCollection * Side skirts * Spoiler Prodpozbf Stjfx Adxsc * Auxiliary heater Semtrade B.V. Contact | Martin Klaaijsen | Tel: | Whatsapp: | Email: Export costs | Please inquire in advance about the costs and procedures for your respective country. Location | Maasdijk (NL) | 140 km from the border | 20 km from Rotterdam The Hague Airport Disclaimer: Subject to changes, prior sale and errors.

Condition: used, Dr. Hönle Dr. Hönle UV Technology – Bluepoint LED High-Power + Bluepoint 2 easycure – Complete system including LED spotlights & manuals For sale is a complete UV curing system from Dr. Hönle, consisting of two control units and several LED spotlights. Ideal for professional applications in electronics manufacturing, medical technology, optics, plastics processing and laboratory operations. Description: The system includes: Bluepoint LED High-Power control unit (REF 45250.c) Bluepoint 2 easycure control unit (REF 33900.a) Several UV LED spotlights (e.g. 365 nm, air-cooled) Adapter BP-LED 4-1 (REF 45970.a) – for controlling up to 4 spotlights Pedpfx Adszimamjxsrc Original operating manuals + CD The devices enable precise control of irradiation time, intensity and energy – perfect for reproducible UV curing processes in industry. Technical data: Bluepoint LED High-Power (45250.c): Supply: 36 V / 5.5 A Control of up to 4 LED spotlights UV intensity adjustable Time programs and energy measurement Bluepoint 2 easycure (33900.a): 230 V AC, 50 Hz 570 VA power consumption High-performance LED controller Industrial quality, Made in Germany Dimensions / Total weight: approx. 12–15 kg Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (See picture) Bluepoint LED High-Power Bluepoint 2 easycure LED spotlights (air-cooled) Adapter BP-LED 4-1 Operating manuals CD Original documents (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, mileage: 170,250 km, power: 390 kW (530.25 HP), first registration: 07/2024, fuel type: diesel, overall weight: 29,000 kg, axle configuration: 3 axles, next inspection (TÜV): 07/2027, brakes: retarder, color: blue, gearing type: automatic, Year of construction: 2024, SCANIA S530 Boogie, full equipment, special features, interior design, only 170,500 km, like new condition First registration: TÜV (technical inspection): - Mileage: 170,500 km Chassis number: YS2S6X20005751995 Engine power: 390 kW (530 hp) V8 Transmission: Automatic Wheelbase: 315 cm (axle 1 to 2) Unladen weight: 10,177 kg Permissible total weight: 29,000 kg GCW: 75,000 kg Cab color: Blue Chassis color: Original color Suspension: Fully air-suspended, air suspension front and rear. Emission class: EURO 6 E Configuration: 6x2 Front tires: 385/65 L30% H30% Axle 2 tires: 315/70 L40% R40% Axle 3 tires: 295/60 L30% R30% Brakes: 85%, 83%, 88% Clutch: 100% Fifth wheel coupling height: 116 cm Type of fifth wheel coupling: Jost fifth wheel coupling Cab design: S Highline Extras: Retarder, air suspension on the front axle, leather steering wheel, 2x King of the Road leather seats, double glazing, padded cab, microwave, air conditioning with automatic climate control, auxiliary heater, auxiliary air conditioning, refrigerator, navigation system, adaptive cruise control, 2x aluminum tanks with a total volume of 875 liters, numerous additional headlights, spoiler, mudguards, side skirts, adjustable fifth wheel coupling, etc. Scania S530 Boogie in like-new condition Immediately available and ready for use. Further information: * Payload: 18,823 kg * Width: 2550 mm * Tire size | Third axle: 295/60 R22.5 * Tire tread depth inside left | First axle: 30% * Tire tread depth inside right | First axle: 30% * Tire tread depth outside left | Third axle: 30% * Tire tread depth inside left | Third axle: 30% * Tire tread depth outside right | Third axle: 30% * Tire tread depth inside right | Third axle: 30% * Wheelbase: 315 cm * Tire size | Second axle: 315/70 R22.5 * Tire size | First axle: 385/65 R22.5 * Height: 3990 mm * Tire tread depth outside left | Second axle: 40% * Tire tread depth inside left | Second axle: 40% * Tire tread depth outside right | Second axle: 40% * Tire tread depth inside right | Second axle: 40% * Length: 6820 mm * Type | First axle: Michelin R * Type | Second axle: Michelin R * Type | Third axle: Michelin R * Cab: Yes * Price on request: Yes * Position | First axle: Front * Brand | First axle: Other * Brake type | First axle: Disc brakes * Suspension | First axle: Air suspension * Steering | First axle: Yes * Position | Second axle: Middle * Position | Third axle: Rear * Brand | Second axle: Other * Brand | Third axle: Other * Brake type | Second axle: Disc brakes * Brake type | Third axle: Disc brakes * Suspension | Second axle: Air suspension * Suspension | Third axle: Air suspension * Reduction | Second axle: Single reduction * Lift axle | Third axle: Yes * Twin tires | Second axle: Yes * Twin tires | Third axle: Yes * Driven | Second axle: Yes * Differential lock | Second axle: Yes Additional equipment: * Retarder Semtrade B.V. Contact | Martin Klaaijsen | Tel: | Whatsapp: | Email: Export costs | Please inform yourself in advance about the costs and procedures in your respective country Location | Maasdijk (NL) | 140 km from the border | 20 km from Rotterdam The Hague Airport Prjdo Agqv Eepfx Adxsc Disclaimer: Subject to changes, prior sale and errors.

Condition: used, Year of construction: 2001, machine/vehicle number: LA15, Used BERTOLASO WDT10 washer dryer - Year 2001Technical Specifications & Performance DataThe Bertolaso WDT 10 is an external bottle washer-dryer engineered for reliable operation in beverage production and industrial packaging environments. It combines mechanical brushing with targeted water jets to remove residues on the bottle body, bottom, and closure area, followed by high-energy air-knife drying. This second hand unit is well-suited for integration within a used bottling line and provides robust construction for continuous-duty applications.Model: WDT 10Manufactured by: BertolasoYear: 2001Speed: 3.000 - 5.000 BPH Function: External bottle washing and dryingWashing system: Rotating brushes with directed water jetsDrying system: Seven blower motors with high-velocity air blades/hot airBottle handling: Infeed worm screw; infeed and outfeed star wheelsConstruction: Stainless steel frame and claddingGuards: Polycarbonate guard doorsElectrical supply: 400 V, 50 HzInstalled power: 20 kWApprox. mass: 2400 kgDocumentation: Complete electrical documentationAdvanced Automation & Control SystemsAutomation is anchored by a Danfoss variable-frequency drive for smooth speed control and Siemens control components for dependable governance of washing and drying sequences. The machine supports manual and automatic operating modes, allowing quick adaptation from setup and maintenance to full automatic production. Electrical specifications include 400 V, 50 Hz with a 20 kW installed load, making it straightforward to integrate into standard industrial power networks. Protective guarding enhances operator safety and visibility during operation.Production Line Integration CapabilitiesThe WDT 10 integrates easily into upstream and downstream bottling equipment thanks to its worm-screw infeed and star-wheel transfer, ensuring consistent bottle spacing and orientation. It is designed for bottle handling in beverage production, whether operating as a standalone module or inline with fillers, cappers, labelers, and packaging machinery. This flexibility supports a range of industrial packaging layouts for PET and glass bottles.Machine Condition & Maintenance HistoryThis second hand external bottle washer-dryer is presented in working condition with complete electrical documentation, facilitating commissioning, service, and spare-parts management. The robust stainless steel construction and established component brands contribute to long-term reliability and maintainability for beverage production environments.Operational Performance & VersatilityThe dual-action cleaning approach—brush scrubbing combined with targeted water jets—ensures thorough external cleaning of cylindrical containers, including difficult areas around the bottom and closure. The drying tunnel uses seven blower motors and air blades to deliver effective surface drying prior to labeling, coding, or secondary pac... Predpfx Ads Ady Azsxjc

Condition: used, Year of construction: 2023, machine/vehicle number: CA73, Used capsuling machine Robino & Galandrino Minibloc year 2023 – 3000 bphThe used capsuling machine Robino & Galandrino Minibloc year 2003 – 3000 bph offers a compact and versatile solution for automatically applying capsules to bottles of still and sparkling wine. As a result, this machine suits diverse production environments. Robino & Galandrino designed this monoblock machine to meet different production needs while ensuring high operational efficiency and consistent product quality.Structure and mechanical configurationRobino & Galandrino configured this machine as a Minibloc automatic capsuling monoblock. Specifically, the design includes two operational heads, each performing specific stages of the capsuling process. The infeed screw aligns and guides the bottles precisely into the processing area. In this way, the machine ensures accurate bottle positioning throughout the cycle.Performance based on capsule typeThe used capsuling machine Robino & Galandrino Minibloc year 2003 – 3000 bph delivers specific output levels based on the capsule type. For instance, it distributes and spins polylaminate capsules on still wine bottles at speeds of up to 1200 bottles per hour. It heat-shrinks PVC capsules onto still wine bottles at up to 3000 bottles per hour. It forms four folds and smooths sparkling wine caps (capsuloni) at speeds of up to 2000 bottles per hour. Moreover, each process maintains excellent consistency and minimal deviation. Therefore, it can satisfy various technical bottling standards across the wine sector.Capsule feeding systemThe machine uses a horizontal capsule magazine with a motorized belt that feeds capsules into the distributor. Notably, it holds around 1200 capsuloni or 1800 standard wine capsules, allowing operators to run longer production cycles without frequent reloads. Consequently, this reduces machine downtime and improves overall line efficiency. Additionally, the feeding system ensures steady capsule flow under different operating speeds. Thus, it contributes to the machine’s stability and reliability.Distributor and synchronization mechanismsThe single-bell distributor performs a 90-degree angular movement to release the capsules. At the same time, a mechanical needle system separates the capsules before distribution to prevent jams and ensure a continuous process. Furthermore, the encoder actively manages the synchronization of all functions and adjusts them in real time. Thanks to this, the system can react dynamically to changes in bottle flow and capsule format. In contrast to older systems, this configuration minimizes manual calibration.Format compatibility and flexibilityThe machine processes bottles in three formats: 0.375 liters, 0.75 liters, and 1.5 liters. Accordingly, operators can use it across different bottling lines and product ranges. In fact, the used capsuling machine Robino & Galandrino Minibloc year 2003 – 3000 bph adapts well to the needs of small and medium-sized wineries that require flexible equipment.Operational conclusionsTechnicians appreciate the used capsuling machine Robino & Galandrino Minibloc year 2003 – 3000 bph for its solid mechanics and well-optimized capsuling system. In particular, the dual-head structure and encoder-based adjustments enable precise operation and quick format changes. Moreover, i... Prsdpfx Ae Ady Evodxjc

Condition: used, Year of construction: 2012, machine/vehicle number: ET220, Used Labeling Machine plus capsuling machine GAI 6206CH 001 1200 bph General machine features This Machine integrates efficiently into low and medium capacity bottling lines. GAI manufactured this unit in the year 2012 and configured it to operate at a nominal speed of 1200 bottles per hour. Therefore, this output makes the machine suitable for operations that require flexibility, reliability, and compatibility with various container formats. In addition, its design supports a wide range of production environments. Capsuling unit configuration The capsuling unit rotates in a clockwise direction and uses rotary motion to handle capsule application. Specifically, the machine includes two independent heads. One head applies heat shrink or poly capsules for still wine. The other head applies tin or polylaminate capsules for sparkling wine. As a result, this dual head configuration allows operators to switch formats quickly. Moreover, it helps manage different production types without the need for extensive retooling. Consequently, it minimizes downtime and optimizes performance. Linear labeling machine layout Pjdpfx Ae Adyv Ijdxerc The integrated linear labeling machine on the Used Labeling Machine plus capsuling machine GAI 6206CH 001 1200 bph applies labels through three separate stations. Firstly, the front label station performs the first application. Secondly, the back label station handles the reverse side. Thirdly, the neck ring station completes the labeling process. These synchronized stations ensure precise multi label application, reduce waste, and maintain consistent product presentation. Furthermore, the modular layout allows quick adaptation to different bottle sizes. Automation and control system A Siemens programmable logic controller manages the automation of the Used Labeling Machine plus capsuling machine GAI 6206CH 001 1200 bph. Notably, this system ensures operational stability and allows technicians to configure production settings with ease. For instance, operators can navigate the control panel efficiently to perform adjustments and monitor diagnostics. In comparison with older systems, this technology improves efficiency and allows easier integration with existing lines. Additionally, it guarantees reliable access to spare parts and technical assistance across the European market. Technical documentation and support The seller provides the machine with complete technical documentation. This package includes instruction manuals, electrical schematics, and configuration tables. Therefore, technicians can install, adjust, and maintain the machine effectively. On top of that, the documentation helps ensure safety compliance and alignment with process standards. As such, it contributes to organized and secure plant operations. Industrial applications and operational benefits Operators in medium sized wineries and se...

Condition: used, Year of construction: 2002, Technical details: x-Travel: 600 mm Psdpez Dt Siefx Adxorc table cross travel (Y-axis): 500 mm w-axis: 250 mm control: Ixion TL-1 x-travel: 600 mm y-travel: 500 mm z-travel: 350 mm drilling depth in one stroke: 600 mm number of spindle speeds: 300 - 6000 /100 - 1600 U/min drill capacity in steel: 3 - 25 mm table surface area: 900 x 500 mm table load: 2000 kg connected load: 10 kVA weight of the machine ca.: 4 t dimension machine approx.LxWxH: 2,0 x 2,8 x 1,9 m The AUERBACH IXION AX1-TL is an industrial CNC deep-hole drilling machine designed for the precise machining of workpieces, particularly for producing deep holes with small to medium diameters. The machine is equipped with a powerful high-pressure coolant system and is designed for deep-hole drilling with single-lip carbide drills from Ø 3 to 25 mm. The coolant system has a tank capacity of 600 litres, a maximum coolant pressure of 90 bar and a maximum flow rate of 40 l/min. This ensures reliable cooling and efficient chip removal even during deep-hole drilling operations. The worktable measures 900 × 500 mm and is designed for a maximum table load of 2,000 kg. Four longitudinal T-slots provide flexible and secure workpiece clamping. The main spindle is driven by a 4.0 kW AC motor. Two belt-driven speed ranges provide programmable spindle speeds of 300–6,000 rpm and 100–1,600 rpm, allowing the machine to be adapted to different tool diameters and machining requirements. *