Used Adjustable Fence for sale (22,835)

Condition: new, functionality: fully functional, power: 10 kW (13.60 HP), gearing type: automatic, fuel type: diesel, color: yellow, overall weight: 1,035 kg, empty load weight: 1,305 kg, operation weight: 1,350 kg, lifting height: 2,150 mm, tire condition: 100 %, drive condition: 100 %, chain condition: 100 %, axle configuration: 2 axles, number of seats: 1, first registration: 08/2026, emission class: euro5, mast type: other, brakes: other, suspension: steel, Year of construction: 2026, operating hours: 2 h, Equipment: additional headlights, adjustable boom, hydraulics, low noise, rubber tracks, standard shovel, Mini Excavator GT JAPAN1000J Crawler Mini Excavator The GT JAPAN1000J mini excavator, in its new and improved version, is a compact machine weighing 1035 kg, designed for precise excavation work in confined spaces. Thanks to its adjustable width of 750–950 mm, it is ideal for narrow passages, private properties, gardens, and urban environments. Perfect for excavation work for installations, foundations, fences, and for clearing and leveling tasks. Kubota D722 engine – reliability and power The machine is equipped with a 3-cylinder Kubota D722 diesel engine with an output of 10.2 kW at 2500 rpm. This engine is known for its smooth operation, low fuel consumption, and high durability. This ensures that the mini excavator delivers stable and efficient performance, even under heavy use. Advanced hydraulic system The GT JAPAN1000J is equipped with a double gear pump with a capacity of 25 l/min and a Load Sensing valve system, which ensures smooth, precise, and energy-efficient operation. The working pressure of 16 MPa guarantees sufficient power for demanding tasks, while the maximum drawbar pull of 19 kN ensures good mobility on difficult terrain. Precision and ease of operation The mini excavator features ergonomic joysticks that enable intuitive and precise control. The swivel boom (54° to the left / 59° to the right) significantly facilitates working along walls and obstacles, while the extendable tracks provide extra stability and adaptation to different working conditions. Compact dimensions and mobility The total length of the machine is 3005 mm, the height is 2160 mm, and the width is adjustable from 750 to 950 mm. The turning radius at the rear is only 510 mm, which allows operation in very confined spaces. The ground clearance at the rear is 380 mm and the minimum ground clearance is 140 mm, which facilitates driving on uneven terrain. The tracks with a width of 180 mm and a length of 1330 mm provide stability and good grip. Technical data Weight 1035 kg Engine Kubota Configuration 3-cylinder diesel Rated power 10.2 kW / 2500 rpm Maximum drawbar pull 19 kN Type of hydraulic pump double gear pump Main pump output 25 l/min Working pressure 16 MPa Type of control valve Load Sensing valve Fuel tank capacity 15 l Arm digging force 5.5 kN Bucket digging force 6.5 kN Joystick Yes Swivel boom Yes Extendable tracks Yes Travel drive Two travel speeds Bucket capacity 0.02 m³ Travel speed 2.1 / 4 km/h Platform rotation speed 13 rpm Boom swivel angle left 54° / right 59° Grading ability 30° Maximum digging height 3060 mm Maximum dumping height 2150 mm Lhsdpfxjzrqpks Akqsn Maximum digging depth 1870 mm Maximum digging radius 3410 mm Maximum reach at ground level 3350 mm Turning radius rear 510 mm Overall length 3005 mm Overall width 750–950 mm Overall height 2160 mm Ground clearance rear 380 mm Minimum ground clearance 140 mm Track width 180 mm Track length 1330 mm

Condition: used, Year of construction: 2022, Exhibition machine Year of manufacture: 2022 Equipment and technical data: > Solid German engineering for jointing and rabbeting, including concave and convex profiling > Adjustable rabbet depth for PLANER WIDTH up to 510 mm and max. chip removal up to 8 mm Ledpfxjzz Tzne Akqohn > Ergonomic working position directly at the cutterblock > Panhans four-knife cutterblock with strip-type planing knives and adjustment tools > Finely planed cast iron table, total table length 2850 mm > Control panel at eye level with digital display of chip removal, current outfeed table position (neutral, concave and convex profiling), including template holder and practical tool storage > Electrically adjustable infeed table via push buttons > Concave and convex profiling adjustment on the outfeed table > Toothed table lips for noise reduction > Adjustable fence in depth and angle via a single lever, adjustable up to 45° and mounted in an extremely smooth steel guide > Anodized fence ruler > Swivel auxiliary fence type 1545 > Console for feed mechanism > Bridge guard TXF type 1570 with folding cover > Automatic star-delta starter, motor circuit breaker > Planed in our workshop Planer width: 510 mm Infeed table length: 1620 mm Outfeed table length: 1170 mm Total table length: 2850 mm Motor power: 5.5 kW / 7.5 HP Cutterblock speed: 5000 rpm Dust extraction port: 160 mm Voltage: 400 V / 50 Hz Footprint: 2850 x 1420 mm Color: Light gray RAL 7034 and violet-blue RAL 5000 Weight: approx. 1050 kg Includes: Full steel Tersa cutterblock > Automatic motor brake Location: Flörsheim Availability: Short notice

Condition: good (used), functionality: fully functional, Robust Hombak surface planer in a heavy-duty, solid cast iron construction. Lhsdpfx Akozz Hd Aeqon The machine features a planing width of 510 mm, an approximately 2,500 mm long planing table, and a 2-knife cutterhead. The fence is adjustable. The electrical system has been overhauled – the machine has a new switch and new wiring. A spare cutterhead including knives is also included and is part of the scope of delivery. Technical data / Features Manufacturer: Hombak Machine type: Surface planer Year of manufacture: 1980s Planing width: 510 mm Table length: approx. 2,500 mm Cutterhead: 2-knife cutterhead Dust extraction port: Ø 140 mm Construction: heavy-duty cast iron Fence: present, adjustable Connection: 400 V / CEE New switch New wiring Spare cutterhead incl. knives: present The machine is in used condition with signs of wear corresponding to its age. The machine will be inspected before sale. For used machines with a year of manufacture of 2009 or earlier, the warranty is excluded when sold to commercial customers. Transport is possible for an extra charge! Technical data and features may vary. Errors, prior sale and changes reserved. All information without guarantee.

Condition: used, Tenoning spindle 1 St. Number of milling agregates 5 St. Spindle diameter 50 mm Control Weinig PC-Nexus Weinig Unicontrol 11 Window System with Extensive Tooling ----- Optionally available (at additional cost): - Weinig Univar 6 Rebating Machine (Price upon request!) - Götzinger PowerDrill Drilling and Milling Center for Windows and Doors (Price upon request) Manufacturer's Technical Description: ----- Item 1: Weinig Unicontrol 11 Window System ----- Includes existing tooling sets: - IV 67 (Wood and Wood-Aluminum) - IV 77 (Wood and Wood-Aluminum) - IV 90 (Wood) Cross-cut Saw ----- With laser alignment light; motor power: 3 kW; spindle diameter: 40 mm; electronically variable spindle speed with brake: 3,000–6,000 rpm. Max. tool cutting circle: 400 mm Axial adjustment: 150 mm via NC axis Radial adjustment: pneumatic, to 8 positions for top edge rounding Horizontal Bottom Rounding Unit ----- Motor with brake: 1.5 kW; Spindle diameter: 20 mm; Clamping length: 25 mm Spindle speed: 9,000 rpm Max. tool cutting circle: 130 mm Axial adjustment travel: mechanically coupled with cut-off saw Radial adjustment travel: pneumatically controlled Tenoning and Slotting Spindle ----- With hydraulically clamped outboard bearing Motor power with brake: 15 kW Spindle diameter: 50 mm Spindle speed: 2,800 rpm Max. tool cutting circle: 400 mm Tool clamping length: 640 mm Ledpfx Asy T R Tujkqshn Axial adjustment travel: NC axis Home position below table: 5–10 mm Radial adjustment travel: fixed 1st Profiling Spindle (Climb and Conventional Milling) ----- Motor power with brake: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Min. tool cutting circle: 140 mm; Max. tool cutting circle: 232 mm Tool clamping length: 400 mm (with outboard bearing) Axial adjustment travel: 350 mm (NC axis) Radial adjustment travel: NC axis Home position below table: 5–10 mm 2 feed rollers opposite the spindle; axial adjustment pneumatically controlled (8 positions) Horizontal Top Profiling Unit ----- Motor power with brake: 3.7 kW Spindle diameter: 40 mm Clamping length: 40 mm Spindle speed: 9,000 rpm Max. tool cutting circle: 130 mm Adjustment: pneumatic, to 8 positions (axial and...) radial 2. Profile Spindle ----- Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool cutting circle: min. 140 mm, max. 232 mm Tool clamping length: 400 mm (with outboard bearing) Axial adjustment travel: 350 mm (NC axis) Radial adjustment travel: NC axis Home position (below table): 5–10 mm Indexed guide fence with muntin support strip 2 feed rollers (opposite the spindle); axially pneumatically controlled (8 positions) Vertical Profile Milling Unit (Right-hand side, at machine end) ----- Motor power (with brake): 3.7 kW Spindle diameter: 40 mm Clamping length: 160 mm Spindle speed: 5,850 rpm Tool cutting circle: min. 112 mm, max. 210 mm Adjustment: Pneumatic (8 positions—axial a...

Condition: used, Year of construction: 1993, Used machine Year of manufacture: 1993 Equipment and technical data: - rigid milling spindle; newly bearing-mounted - with table extension with extendable frame support 2500 mm Lhsdpfjzlbpujx Akqon - motor 5.5 kW - speeds 3000/4500/6000/8000/10000 rpm - milling fence with 2 adjustment options: - full fence - rear outfeed jaws - extraction hoods: 2 x 120 mm - automatic motor brake - clockwise/counter-clockwise rotation - with Haffner feed unit with 4 rollers Weight approx. 700 kg Availability: by arrangement Location: Flörsheim

Condition: ready for operation (used), Year of construction: 2004, sheet width 3050 mm plate thickness 13.0 mm thickness at "Niro-steel" 8.0 mm cutting angle 0.5 - 2.5 ° no. of strokes 8 - 25 Hub/min back stop - adjustable max. 1.000 mm Control SIEMENS Number of downholders 13 Stk. Lhsdpfezkvx Usx Akqon oil volume 300 ltr. engine output 21.0 kW weight 8700 kg. range L-W-H 3950 x 2200 x 1900 mm Features: - Robust electro-hydraulic sheet metal shear * Design: "Circuit-guided" - NC electro-motorized backgauge * with SIEMENS NC control unit "OP 7" * Input of target and actual position values - NC electro-hydraulic cutting angle adjustment - Manual cutting gap adjustment, from the front via handwheel - Recessed grips in the front support table - Front finger guard - 1x long side fence - 1x long support arm - 1x freely movable foot switch - Original operating instructions (NL)

Condition: as good as new (ex-display), functionality: fully functional, power: 7.35 kW (9.99 HP), cutting height (max.): 105 mm, cutting width (max.): 2,100 mm, saw blade diameter: 350 mm, total length: 4,300 mm, The FIMAL CONCEPT 350 ELITE is the further development of the proven CONCEPT 350 PLUS, setting new standards in precision, safety, and efficiency. With a reinforced machine base, optimized extraction system, and a redesigned Multistop fence table, it offers even greater comfort and performance for joiners, furniture makers, and industrial panel processing. Thanks to its pressure beam with automatic feed, the ELITE combines the flexibility of a sliding table saw with the cutting quality of a pressure beam saw – all within a footprint of just 28 m². Technical Specifications ⦁ Aluminum machine and extension tables ⦁ Saw unit tiltable up to 46° ⦁ Pressure beam, including LED lighting with 3 different action colors: WHITE: Machine in stand-by RED: Pressure beam lowering or emergency-stop function BLUE: Saw unit in motion ⦁ Versatile support table 1,000 x 500 mm ⦁ Scoring system via the main saw blade (co-rotating) ⦁ Automatic workpiece length detection for minimal travel distance ⦁ Mobile and height-adjustable control panel, including: Saw blade holder, template holder, emergency-stop button, start button, selector Lhjdjw Axf Ropfx Akqjn switch for grooving/scoring/cutting, rotary switch for feed speed, switches for laser (option) and USB socket ⦁ Max. saw blade projection (350 mm blade): 100 mm at 90° / 70 mm at 45° ⦁ Saw blade: diameter 300 – 350 mm, bore 30 mm ⦁ Saw blade speed: 4,000 rpm ⦁ Motor: 5 kW (= 7.5 HP) ⦁ Feed speed: 0 – 40 m/min ⦁ Total length: approx. 4,250 mm ⦁ Weight: approx. 1,300 – 1,700 kg (depending on cutting length and configuration) ⦁ Required air pressure: 7 bar ⦁ Extraction port: 1 x 100 mm, 1 x 120 mm ⦁ Extension table length: 3,670 mm / 4,270 mm / 4,870 mm (total length) ⦁ Tilting range: 0 - 46° ⦁ Sliding table: 1,000 x 400 mm (extension table) ⦁ Crosscut fence: 3,200 mm with 2 digital flip stops ⦁ Speed: 4,000 rpm ⦁ Air requirement: 6 bar ⦁ Motor voltage: 400 V (50 Hz) ⦁ Feed speed: 0 - 40 m/min Options Multistop, cutting width 2,100 mm instead of 1,300 mm Programmable saw blade height adjustment Miter fence +/-50° Cutting line laser Including delivery and installation within postal code areas 71,72,73,77,78,79,86,87,88,89

Year of construction: 2020, condition: used, No. 3233 Cross milling machine Wema Probst QBV 200 Used, year of construction 2020 The machine is in mint condition, less than 30 holes have been drilled. The QBV 200 is designed for fitting cross milling and holes in both round milled or profiled logs. This machine permits to make perfectly adjusted connections in rounded logs by three-dimensional manual adjustment. Their fields of application are e.g. the angle joints for log cabin constructions, frame constructions or the wooden material for the “landscape architecture” e.g. fences, carports, palisades, flower boxes, raised-beds, guardrails etc. The cross milling machine consists of a base frame in welded steel construction with a swivel-mounted drilling device and gas spring-supported drilling column as well as an adjustment for the position of the drilling column. The wood is clamped with two centering vices. With the special tool (round saw), asymmetrical or end-face processing can be carried out. The machine can also drill 90° holes up to 120 mm diameter in wood by flat drill. Accessories: Collet chuck with 25 mm diameter for the tool holder, without tools Wood diameter: 60 - 200 mm Adjustable range of tools: +/- 60° for 60 mm diameter range / +/- 45° for 80 mm - 140 mm diameter range / +/- 30° for 160 mm - 200 mm diameter range Motor capacity: 2.2 kW Number of revolutions: 1200 rpm Operating voltage: 400 V / 50 Hz Transport dimensions approx. 1200 x 1400 x 2400 mm LWH Weight approx. 380 kg Sale on behalf of customer, from location near 46026 Valencia (Spain), without disassembly, without transport and assembly Disassembly, loading and transport by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical information, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale No warranty is given for used machines, the following applies: “purchased as viewed” Pictures and videos serve as examples and do not represent the actual scope of delivery Lhsdpfx Aowt Abwokqsn Terms of payment: Prices excl. VAT, payment before collection or shipping Terms of delivery: ex location

Condition: ready for operation (used), Year of construction: 1999, pressure 80.0 t chamfer lenght 2570 mm distance between columns 2125 mm column arm 420 mm table width 60.0 mm ajustment speed 100 mm/sec working feed 10.0 mm/sec return speed 100 mm/sec stroke 200 mm dayligth 470 mm table height 960 mm Number of working hours ~ 33.100 h oil volume 90.0 l total power requirement 9.0 KW weight of the machine ca. 5750 kg. range L-W-H 3630 x 2450 x 2550 mm - in checked conditions - machinevideo - ?v=SskqZJdQxsQ ?v=KcKjibwWAKI Equipment: - AMADA CNC control, model OPERATEUR II * Manual control for fine adjustment of the axes - CNC control OPERATEUR 2 in 8 axes (X1 X2,Y1 Y2,R1 R2,Z1 Z2) - CNC-controlled backgauge adjustment (X1 X2) - CNC-controlled vertical adjustment of the fence fingers (R1 R2) - CNC-controlled adjustment of the stop fingers left-right (Z1 Z2) - Swivel operation, front left Ledpfoyyc Dfjx Akqjhn - 1x freely movable foot switch - Top tool holder with top wedge crowning (AMADA system) - Rear safety guard (safety grid) - Side safety guard (safety doors) - CE marking - Original operating instructions * Further technical data : Adjustment range : X axis ... 700 mm X axis with workpiece in place ... 1020 mm R axis .. 250 mm Adjustment speed : X axis .. 500 mm/sec R axis ... 160 mm/sec Z1 Z2 axis .. 1000 mm/sec Positioning accuracy ± in mm : X axis .. 0.1 R axis .. 0.1 Z axis .. 1.0

Condition: excellent (used), Multi-function machine, panel saw, thickness planer SCM Casadei Model: C 30 C Thickness planer 3 kW: Width: 30 cm, Max height approx. 200 mm, 3 knives, 1 feed speed, Jointer: Width: 30 cm, Table length: 150 cm, 3 knives, Adjustable angle fence, Spindle moulder 3 kW: Spindle diameter 40 mm, Spindle height adjustment up-down, 4 speeds, Side sliding table, Adjustable fence, Lhsdpey Eyhrofx Akqjn Panel saw 3 kW: Scoring unit, Height and 0-45 degree angle adjustment, Sliding table 225 cm, Ruler on side table, Max saw blade 315 mm, Horizontal drilling machine: Table adjustable up-down, front-back, left-right, The machine has 3 motors, Power supply 380V, Used machine in good condition, ready for operation, Robust and multi-functional.

Condition: as good as new (ex-display), Year of construction: 2025, machine/vehicle number: AB00035080, input voltage: 400 V, input current: 35 A, input frequency: 50 Hz, type of input current: three-phase, overall weight: 1,112 kg, Equipment: CE marking, documentation/manual, saw blade guard, SCM Class SI 400ep panel saw with blade guard, CE version, manufactured in 2025. Equipped with a miter fence with 3 LCD screens for positioning the stops, automatic adjustment with 2 axes for the scoring unit, a chassis for miter operations with the CompeX system, and an extended support table for panels with a roller conveyor on the side of the parallel fence. Lhedpfxsz Nggle Akqen

Condition: used, Year of construction: 2001, saw blade diameter: 150 mm, type of input current: three-phase, Startrite SC160 professional panel saw / sliding table saw, manufactured in 2001. Fully working and available to view/test by arrangement. Features include: • Large sliding table • Sliding crosscut table and adjustable fence • Rip fence • Main saw blade diameter: 150 mm minimum • Blade angle adjustment up to 45° • Professional workshop machine • 3-phase supply Lsdpfoz Nl Hkjx Akqjhn • Substantial, heavy-duty machine The machine is in used workshop condition with normal signs of use and cosmetic wear, as shown in the photographs. Collection from Tamworth, Staffordshire. Buyer to arrange suitable collection and transport. Please study all photographs carefully. Further information available on request.

Condition: new, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: AC, Equipment: CE marking, saw blade guard, scorer, Altendorf F 45 – Panel Saw | ElmoDrive | EvoDrive | ProDrive | HAND GUARD The Altendorf F 45 is one of the highest-quality and most versatile panel saws for professional use in carpentry shops, joineries, interior design, furniture manufacturing, and industrial wood processing. The F 45 impresses with its high precision, robust design, user-friendly operation, and numerous configuration options. Depending on the configuration, it is available with ProDrive, EvoDrive, or the comprehensive ElmoDrive control system. For the highest demands on work safety, the F 45 is also available with the innovative Altendorf HAND GUARD safety system. EQUIPMENT VARIANTS Lhedpsz Nmvasfx Akqen Altendorf F 45 ProDrive Comfortable and clear operation at eye level. The pivoting control unit enables ergonomic operation and precise adjustment of machine functions. Altendorf F 45 EvoDrive Control system with a 7" touchscreen and separate keyboard for comfortable entry of numerical dimensions. The machine axes can be quickly and precisely adjusted. Altendorf F 45 ElmoDrive The most comprehensive control system variant of the F 45. The large 12" touchscreen allows axes and numerous software functions to be conveniently selected and controlled. Altendorf F 45 HAND GUARD For the highest safety requirements, the HAND GUARD is available on the basis of the F 45 with the optical safety system. The camera technology recognizes hands or hazardous situations in the area of the saw blade. In the event of a hazard, the saw unit is lowered, and the saw blade is stopped. After activation, the machine is immediately ready for use again. The HAND GUARD variant is equipped with ElmoDrive. TECHNICAL DATA • Manufacturer: Altendorf • Model: F 45 • Machine type: Panel saw • Control systems: ProDrive / EvoDrive / ElmoDrive • Safety system: optional HAND GUARD • Main motor: depending on the configuration, 5.5 – 11 kW • Saw blade diameter: up to max. 450 mm, larger sizes also possible • Saw blade overhang: up to max. 204 mm • Swivel range: 0 – 46°, double-sided TwinFlex swivel also possible • Working height: approx. 850 / 880 / 910 mm • Double roller carriage: up to 3,000 mm • Cutting length: up to 5,000 mm • Cutting width: up to 1,600 mm • CNC parallel fence: optional • CNC angle mitre fence: optional • Tool clamping system: AKE EQUIPMENT AND FUNCTIONS Depending on the configuration, the following are possible: • electromotive height and swivel adjustment • automatic correction of the cutting height during swiveling • motorized or CNC-controlled parallel fence • CNC angle mitre fence • double roller carriage and various carriage lengths • different motor powers • scoring system • various saw blade diameters • RIP FENCE SECURITY • Altendorf HAND GUARD safety system CNC PARALLEL FENCE The CNC-controlled parallel fence enables quick and highly precise positioning. According to the manufacturer, the system achieves a travel speed of up to 250 mm/s with a dimensional accuracy of ± 0.1 mm. AREAS OF APPLICATION Carpentry shops, joineries, furniture manufacturing, interior design, shop fitting, solid wood and panel processing, as well as plastic, aluminum, and industrial wood processing. Inspection and demonstration available by appointment. Nationwide transport, commissioning, and training available upon request.

Condition: used, Year of construction: 1991, Design: fixed Table size: 1200x730 mm Table height: 900 mm Spindle speeds: 3000/4500/6000/7000/10000 rpm Milling cutter diameter: 30 mm Spindle working length: 180 mm Spindle direction: right/left Speed display: optical Automatic motor brake: mechanical foot brake Design of fence jaws: Aigner fence system Fence adjustment: manual Display of milling fence: none Feed mechanism: with 3 rollers Control panel position: bottom Weight approx.: 600 kg Motor power: 4 kW Lsdpfxez Nnyys Akqohn Dust extraction diameter: 120/120 mm Location: Rieth

Condition: new, Year of construction: 2026, functionality: fully functional, planing width: 530 mm, Houfek Planer-thicknesser SC 530 Standard configuration: Motor 5.5 kW (7.5 HP) Total length of planer tables SC 530 – 2,350 mm Simultaneously tilting planer tables Guide fence dimensions 1,300 × 150 mm Lsdpewvaqzefx Akqshn Fence tilting angle 0°–45° Thicknesser table length – 1,000 mm Manual height adjustment of thicknesser table Mechanical numeric measurement of table position 4-point mounting of thicknesser table Split inlet pressure segments Grooved infeed roller Outfeed roller Min./max. workpiece thickness 3 – 250 mm 4-knife cutterblock D=120 mm Automatic star/delta motor start Feed speeds 6/12 m/min Electromagnetic brake Voltage 400V/50Hz Standard packaging in PE film Machine built according to CE electrical and safety standards Additional equipment (installed on this machine): Motor 7.5 kW (10 HP) for SC 530 Split grooved feed roller Tilting cover for cutterblock Tiltable auxiliary fence Motorised thicknesser table lift with two-speed motor Electronic position measurement of thicknesser table with digital display Cutterblock type "Tersa" for SC 530 mm Planed planer table Planed thicknesser table

Condition: new, Year of construction: 2025, Panel Saw ALTENDORF F 35 Type 3 - 1000 with Scorer 7.5 kW (10 HP), 3 speeds, Motorized height and tilt adjustment, Large protective hood, Double roller carriage 3,200 mm, Scoring unit with LED lighting, CNC rip fence, cutting width 1,000 mm, Angle/miter fence Digit-L, Table extension/table width extension, With proven CDF surface ----- Technical Data ----- Swivel range: 0 - 46°, Carriage length: 3,200 mm, Cutting length: 3,100 mm, Cutting width: 1,000 mm, Cutting height: 154 mm, Max. saw blade Ø: 450 mm, Motor power: 7.5 kW, Screen size: 15 inch, Working table height: 910 mm, Extraction connection Ø: 80 + 120 mm Equipment: Altendorf F 35 Type: III - 1000 Lhodpoxyl Ecjfx Akqon 7.5 kW (10 HP) 3 speeds (M51064) Angle/miter fence Digit L option (M44154) Location: Ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2026, Spindle Moulder SCM / CASADEI F 25 M LL FK Robust professional woodworking machine with spindle tiltable ±45° to both sides and MK4 interchangeable spindle Article number: 5220730 Brand: Holzkraft CASADEI - Heavy-duty steel/cast iron construction - Dynamically balanced cutter unit anchored to the work table - Especially robust design - Smooth running thanks to precision units and high dead weight - Standard with forward/reverse operation and electronic lockout during rotation reversal - Five speeds from 3000 to 10000 rpm - Convenient speed change from machine side - Standard MK 4 interchangeable spindle system - Large precision-ground cast iron work table for lasting accuracy - User-friendly controls and speed display on the front of the machine - Large-format spindle fence with fine adjustment and aluminum fence jaws standard - Fence adjustment via crank handle - Numeric display of set spindle height accurate to tenths - Powerful industrial motors TECHNICAL DATA Dimensions and Weights Net weight approx.: 510 kg Dust Extraction Number of outlets: 2 Outlet diameter: 80 mm Number of fence outlets: 1 Fence outlet diameter: 120 mm Lhodoy Ehcdspfx Akqen Work Table Table length: 2500 mm Table width: 810 mm Table height: 923 mm Placement Information Space requirement explanation: Dimensions include max. travel distances or working lengths Working area length: 3700 mm Working area width/depth: 5000 mm Working area explanation: Please add the specified dimensions to the space requirement to get the recommended free footprint for the machine Electrical Data Connection voltage: 400 V Network frequency: 50 Hz Drive motor power: 7.0 kW Spindle Spindle tilt: -45° to +45° Usable spindle length: 140 / 180 mm (for spindle Ø 30 – 35 / for spindle Ø 40 – 50 mm) Spindle stroke: 90 mm Interchangeable spindle: MK 4 Spindle speeds: 3000/4500/6000/8000/10000 rpm Maximum Tool Diameter Max. retractable tool diameter: 320 x 60 mm Max. profiling diameter: 250 mm Max. tenoning diameter: 350 mm Max. moulding diameter: 160 mm EQUIPMENT - Spindle fence: Heavy-duty professional version with aluminum jaws and fine-adjustment, adjusted from the front via crank handle with numerical digital display - Curved workpiece safety hood: ✔ - Spindle height adjustment: motorized, with digital readout - Spindle tilt adjustment: motorized, with digital readout - Control: motorized height and tilt adjustments with digital display - Control panel position: on machine body - Work table: extension left and right, and extendable workpiece support (total width 2500 mm) Location: ex-stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Dimensions and Weights Length approx. 2000 mm Width/Depth approx. 1110 mm Weight approx. 430 kg Jointer Feed table length 1034 mm Maximum chip removal 5 mm Dust extraction connection Dust extraction port diameter Thickness 2 x 120 mm Thickness Minimum working height 3 mm Maximum working height 230 mm Maximum chip removal 5 mm Electrical Data Power of drive motor 5 kW Connection voltage 400 V Mains frequency 50 Hz Planer cutterhead Type TERSA Number of planer cutters 4 pcs Speed 5200 min⁻¹ Maximum planing width 410 mm Feed Speed 6 / 12 m/min The TERSA planer cutter system enables particularly quiet operation. Helically toothed steel feed roller for consistent and uniform material feed Material feed with two speeds Numerical display for thickness table height The 2,000 mm long jointer tables facilitate easy adjustment of large workpieces. Work tables are made of gray cast iron, annealed and stress-relieved, making them durable and dimensionally stable Stable, large aluminum jointer fence with round bar guide (1200 x 160 mm) Thickness table adjustment via handwheel with numerical display for planing height The high machine weight ensures maximum precision and smooth operation. Powerful industrial motor Robust steel/gray cast iron construction Equipment details Jointer fence Stable, large aluminum jointer fence (1200 x 160 mm) With precise round bar guide Dust extraction hose connection The dust extraction ports for the jointer and thicknesser point in the same direction during jointing and planing. Therefore, the dust extraction hose can be connected to the machine from the same side for both types of planing. You do not need a hose that runs around the machine. Planing unit Helically toothed steel feed rollers for consistent and uniform material feed Solid anti-kickback devices prevent workpieces from being thrown back 4-cutter shaft ensures an optimal planing result Chain drive Sturdy chain drive Drive gears made of steel Solid gray cast iron bearing block Two feed speeds Standard with two feed speeds Comfortably selectable from the operator panel Material feed Helically toothed steel feed rollers for a consistent and uniform material feed without marks Several teeth engage simultaneously for powerful feed Wear-free compared to rubber feed rollers Thickness table adjustment Adjustment via handwheel Numerical display for the set planing height Accuracy 1/10 mm Tersa planer cutterhead No more adjustment and screwing required Planer cutter change in seconds Self-locking Particularly quiet Perfect planing result Lhodpfjhkz E Tex Akqen Location: In stock, 54634 Bitburg - immediately available - Subject to prior sale

Condition: new, Year of construction: 2026, Maximum configuration for the professional user. Combination machine with TERSA cutterblock, miter cutting device and pivoting milling spindle Ø 350 mm main saw blade with a maximum cutting height of 118 mm, which is also achieved when the scoring saw blade is installed Scoring device with separate motor and Ø 120 mm saw blade, easily and conveniently adjustable from the outside Highly precise format sliding table made of anodized aluminum on hardened and riveted steel guide rails Large outfeed table (1200 x 650 mm) with roller and extendable aluminum telescope fence up to a maximum of 3300 mm Saw unit can be pivoted from 90° to -45° Pivoting milling spindle from 90° to -45° to the rear into the milling fence Four milling speeds Right/left rotation of the milling spindle Quick changeover to the thickness planer thanks to parallel-opening planer tables 2-stage feed rate on the thickness table Helical toothed steel feed roller for even wood feed Three independent industrial motors With separate saw parallel fence and separate joiner fence With lockable main switch Equipment details: Format fence Immediate control Ljdocnxa Sspfx Akqehn Outfeed table Outfeed table with angle-adjustable telescope stop with degree scale Sliding table with ball contact system made of anodized aluminum Guides made of hardened and ground steel F550S, 15% harder than conventional steel Guides riveted and not glued easy running, quiet and reliable 10-year HOLZKRAFT warranty on wear of the hardened guide rails Cast iron double-pivot saw unit Height adjustment via dovetail guide extremely robust and torsionally stiff for precise cuts located close to the saw blade, bearing on both sides height- and up to 45° angle adjustable standard scoring unit with separate scoring motor 0.55 kW Double-pivot milling unit large, pivoting double-pivot milling unit made of cast iron Milling fence heavy-duty professional design the high-quality milling fence made of cast iron comes standard with fine adjustment 3-way positionable for quick restoration of the setting with fine adjustment via rack and pinion, digital display and aluminum milling fence cheeks Planing units helical toothed steel feed rollers for a constant and even wood feed massive anti-kickback devices prevent workpieces from kicking back 4-knife Tersa cutterblock ensures an optimal planing result table lips for quieter operation Tersa planing cutterblock No more adjustment and screwing Planer knife change in seconds Self-locking particularly quiet Thickness table The thickness table is mounted on four large-dimensioned spindles, which ensure maximum stability under all working conditions Due to the special lifting device, the table position is maintained without fault, even without locking Parallel fence with fine adjustment and quick clamping stable round bar guide made of ground steel interchangeable aluminum ruler No gap, guide rods are overlapping Separate joiner fence large, professional design (1800 x 150 mm) 0-45° pivotable with quick adjustment stable round bar guide made of ground steel Simultaneous opening Type: No. 5500557

Condition: new, Year of construction: 2024, Martin T 54 jointer Only with a good surface planer can you create truly perfect foundations. The T54 was developed with precisely this objective in mind. It enables you to easily plane workpieces at the most modern level and to safely provide them with angular edges. The machine is equipped with a TERSA solid steel cutterhead as standard. The Xplane cutterhead, which operates with a drawing cut, is available as an optional extra. Planing bevels is effortless, as any angle between 90° and 45° can be quickly adjusted with the user-friendly one-hand adjustment. The solid cast iron tables of the T54 provide secure support even for large, heavy workpieces. If you need even more support, you can extend both the infeed and outfeed tables by 380 mm each - of course also in cast iron. Technical data Lhodpjpgkmwsfx Akqjn table width: 500mm Table length: 2840mm Maximum chip removal: 8mm cutter: diameter 125mm, 5000 rpm, Tersa Z4 Speed: 5000 rpm Motor power: 5,5kW fence adjustable up to 45 Auxiliary ruler for small workpieces Table adjustment motorized Equipment: T 54 T 5462-a Suvamatic T 541-a Tersa knife shaft 4 knives Location: Ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2026, Combination saw-milling machine minimax st 3c F 16 Swiveling saw blade, swiveling milling spindle, and format sliding table made of anodized aluminum Stable steel cast iron construction Large support surface and precise cast iron table High-precision format sliding table made of anodized aluminum (travel 2250 mm) Large rip fence frame (900 x 600 mm) with an extendable aluminum telescope stop up to 2660 mm, featuring professional stop flaps Max. saw blade diameter 315 mm with scoring device, swiveling from 90° to 45° Saw parallel fence with fine adjustment Stable saw unit and large dimensioned double-bearing milling unit ensure maximum stability, precision, smooth running, and long service life Solid and precise machine table made of stress-free cast iron Three milling speeds, manually adjustable from 3500 - 10000 min⁻¹ With right-hand/left-hand rotation of the milling spindle Standard arc milling guard Safety flip stop jaws made of aluminum Two motors with high power reserves Two plug-in handwheels for convenient and quick operation Dimensions and weights Weight approx. 470 kg Dust extraction connection Dust extraction port diameter 2 x 120 mm Dust extraction port diameter saw blade guard 60 mm Electrical data Power of drive motor 2 x 5.0 kW Connection voltage 400 V Mains frequency 50 Hz Milling spindle Spindle inclination 0 – -45 ° Usable length of the spindle 100 mm Spindle speeds 3500/7000/10000 min⁻¹ Milling tool diameter max. non-tilting 210 mm tilting 180 mm dovetail milling 275 mm Circular saw unit Rip fence length 1600 mm Cutting width with parallel fence 900 mm Max. crosscut width to the left of the saw blade 2660 mm Saw blade inclination 90 45 ° Max. cutting height 90° 90 mm Max. cutting height 45° 63 mm Max. saw blade overhang 90° 100 mm Max. saw blade overhang 45° 78 mm Lhsdpohp Rdlefx Akqjn Diameter (main) saw blade 315 mm Explanation diameter (main) saw blade: independent of the scoring saw Speed (main) saw blade 4000 min⁻¹ Sliding table and table Table length 1112 mm Table width 430 mm Scope of supply: Arc milling guard Anodized aluminum format sliding table Aluminum stop jaws Flip stops Location: In stock at 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Holzkraft Combined Jointer-Planer Machine - available immediately - Ideal for demanding craftsmen and carpenters The particularly long, one-piece jointer tables allow for easy surfacing of workpieces Work tables are made of gray cast iron, making them durable and permanently level Rear-opening jointer tables with spring support for quick and convenient setup changes Thanks to the permanently mounted dust extraction hood, no repositioning of the extraction hose is necessary during setup changes, saving valuable working time Helically toothed steel infeed roller ensures constant and even wood feed Rubber outfeed roller at the planer outfeed ensures even wood discharge Material feed with four speeds Planer table adjustment via handwheel with integrated display for planer height DIGITAL version: with electric planer table height adjustment and digital display On/off switch in operator position Powerful industrial motor The high machine weight ensures maximum precision and smooth operation Preparation for mortising attachment Quality Made in Italy Dimensions and Weights Length approx. 2250 mm Width/Depth approx. 1370 mm Weight approx. 695 kg Jointer Total length of tables 2250 mm Chip removal max. 5 mm Fence length 1200 mm Fence height 150 mm Dust extraction connection Dust extraction port diameter Planer 1 x 120 mm Drive power Main motor 7 kW Installation Information Space requirement Length 2250 mm Space requirement Width/Depth 1440 mm Explanation of space requirement: The dimensions take into account maximum travel distances or usable lengths. Planer Planer table Length 850 mm Planer table Width 520 mm Working height min. 3 mm Working height max. 240 mm Working length min. 220 mm Chip removal max. 5 mm Electrical data Connection voltage 400 V Phase(s) 3 Ph Type of current AC Mains frequency 50 Hz Planer cutterhead Type TERSA Diameter 120 mm Number of planer knives 4 pcs Speed 5000 min¯¹ Planer width max. 520 mm Feed Speed 5/8/12/18 m/min Ledpfoih Dxdox Akqjhn Location: In stock at 54634 Bitburg - available immediately -

Condition: as good as new (ex-display), Year of construction: 2025, minimax ti 55es LL – Table saw The illustration shows the T 55 i elite s in its standard version. The professional machine for skilled tradespeople, featuring a pivoting milling spindle and 4 speeds. M Digital: motor-driven height adjustment and pivoting. Sturdy steel and cast iron construction. Oversized milling unit made of cast iron, pivoting up to -45° to the rear. LED display of milling speeds. Fast, trouble-free speed change via eccentric clamping. Clockwise/counterclockwise rotation. Display of height and inclination with 1/10 mm accuracy. Heavy-duty professional fence: with fine adjustment via rack and pinion, with numerical display, aluminum fence cheeks, 3-way positioning for quick repetition of the setting. Scope of delivery: Aluminum fence cheeks Arched milling guard Table extension on the left and right Model: minimax ti 55es LL Article no.: 5502252 Lhsdpfx Aksdqzh Rsqon Technical data Dimensions of the work table: 2500 x 655 mm Dimensions of the format sliding table Usable length of the spindle: 125 mm Max. tool diameter: 240 mm Max. tool diameter (lowered): 230 mm Max. tool diameter (dovetail cutter): 320 mm Spindle inclination: 0 to -45 degrees Speeds: 3500/6000/8000/10000 min-1 Motor power 400 V/ 50 Hz / S6-40%: 5.0 kW Dust extraction port diameter: 2 x 120 mm

Condition: as good as new (ex-display), Year of construction: 2026, minimax c 26g TERSA – Multi-functional machine for sawing, milling, surfacing, and thickness planing. The worktables made of heavy-duty ribbed cast iron and the base frame made of welded steel guarantee torsional rigidity and vibration-free operation. Unique in this performance class: smooth-running, anodized aluminum format sliding table with ball-contact system. Swiveling saw blade from 90° to 45°. Table extension with aluminum stop for panels and large workpieces. Planer unit with TERSA quick-change system with three planer knives. Helically toothed steel infeed roller for consistent workpiece feed during thickness planing. Arc milling guard for profiling, standard with fine adjustment. Milling unit with two speeds. Three independent motors for each working unit. Quality – Made in Europe. Equipment details Aluminum sliding table With a tried-and-tested ball-contact system Dust and dirt-resistant due to minimal contact point between ball and trapezoidal rail Permanently smooth running Saw unit adjustment Manual height and bevel adjustment of the saw unit via star handle Accurate positioning using a scale TERSA planer knife shaft No more adjusting and screwing Planer knife changes in seconds Self-locking Particularly quiet Table milling machine The milling unit has two speeds for flexible tool use. The machine is equipped with a fine-adjustable arc milling guard for profiling. With the aluminum sliding table, mortise and tenon joints can be easily cut. Thickness planer With the powerful thickness feed, workpieces up to 200 mm high can be planed. The helically toothed infeed roller guarantees consistent feed. The surfacing table can be folded inward to save space. Changing from surfacing to thickness planing is done in seconds with a single movement. Surfacing planer Standard with TERSA planer knife quick-change system Large-sized surfacing tables The surfacing and thickness tables made of cast iron guarantee the highest smoothness and vibration-free operation. Saw unit Saw can be swiveled up to 45° With saw blade 250 mm Ø with max. 80 mm cutting height A width of up to 500 mm can be cut on the parallel fence. Table extension With degree scale and aluminum stop for angled cuts on panels and large workpieces Scope of supply: Tersa quick-change planer knife shaft Anodized aluminum format sliding table Miter fence with a folding stop Multi-function fence for parallel cutting and surfacing Eccentric clamping arm Model: minimax c 26g TERSA Article no.: 5500027 Cutting length: 1200 mm Cutting width with parallel fence: 500 mm Max. crosscut width to the left of the saw blade: 1200 mm Saw blade inclination: 90 - 45 degrees Max. cutting height at 90°: 80 mm Format sliding table length: 1140 mm Format sliding table width: 201 mm Format sliding table height: 70 mm Saw table length: 1024 mm Saw table width: 224 mm Saw table height: 900 mm Planer knife shaft type: TERSA Planer knife shaft diameter: 62 mm Number of planer knives: 3 pcs Surfacing table width: 260 mm Surfacing table length: 1040 mm Swivel angle of saw/surfacing fence: 90/45 degrees Max. material removal during surfacing: 3 mm Thickness table length: 450 mm Thickness table width: 260 mm Lhsdpfx Akjdqzh Tjqsn Min. workpiece thickness: 3 mm Location: In stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2026, Panhans BSB 800 band sawing machine TECHNICAL DESCRIPTION Solid German machine construction Machine stand in shapely modern design torsion-free double-chamber welded steel construction Upper and lower door secured by limit switches Upper and lower precision band saw blade guide APA 2, size 2 Finely planed gray cast iron table Swivel table top up to 45 Dyn. balanced band saw wheels with vulcanized rubber bandages Stop ruler can be used to the left of the saw blade, Fence profile can be reversed Blade tension indicator 1 piece saw blade5775 x 30 x 0.8 mm, tooth width9 mm, No. 3780.301 Mechanical height adjustment of the saw blade guard by hand wheel with locking pinion Rotary cam switch with star-delta start and emergency stop button Mechanical motor brake with main switch and motor protection relay CE-compliant GS tested Left-hand machine stand Rotary cam switch with star-delta start and emergency stop switch Wheel diameter 800 mm Lodpfx Aor Igzcskqehn Belt speed 1800 m/min Cutting height 520 mm Cutting width 780 mm Blade length max. 5775 mm Saw blade width min. /max. 15 mm /4 0m m Optional with special coating Saw blade width min. max. 10 mm / 35 mm Table size 1145 x 760 mm Table height 930m m Suction nozzle 2 x 0 120 mm, Motor power 4 kW / 5.5P S Voltage 400 V / 50 Hz Color RAL 7035 light grey and RAL 5000 violet blue Net weight approx. 525 kg Location: From stock 54634 Bitburg - immediately available -