Used Aggregate for sale (747)

Condition: used, Year of construction: 2014, Feed direction of the panel: to the right from the operator Maximum edge thickness: 3 mm Minimum workpiece thickness: 8 mm Maximum workpiece thickness: 60 mm Minimum workpiece width: 65 mm Minimum workpiece length: 160 mm Feed speed: 10 m/min Jointing unit: Yes, with 2 milling units Jointing tool: Diamond cutters Diameter: 70 mm Height: 48 mm Infeed fence adjustment: manual Chopping shear up to: 3 mm Godozq E Hbopfx Af Ajka Single edge feeding: possible Gluing: GlueJet PU gluing: possible Cross-cut saw: Yes Combination unit for flush/bevel/radius: pneumatically adjustable Corner rounding unit: pneumatically adjustable Profile scraper: yes Flat scraper: yes Aggregate display: on the display Control type: via limit switches Operation: Control panel with buttons Transport device: No Extendable roller support: Yes Protective hood: Yes Working height or feed table height: 874 mm Weight approx.: 1400 kg Extraction diameter: 160 mm Storage location:

Condition: new, STATIONARY CONCRETE BATCHING PLANT S160-TWN GENERAL Plant Type : Stationary Concrete Plant with TWIN Shaft Mixer Plant Capacity : 160m³/hour freshly compressed concrete Mixer Capacity : 6000/4000 lt (4m³ Compressed Concrete) Total Motor Power : 245kw Standard Value can be changed depending on Equipment.. Voltage/Frequency : 380V/50Hz Standard Value. The installation and startup of the plant is under our responsibility. We provide excellent after-sales service. 24/7 SERVICES. REMOTE CONTROL SERVICE. Exporting more than 1000 Concrete Batching Plants to more than 90 Countries all over the world. * HIGHLY EFFICIENT AND DUPLICATE PRODUCTION * EASY MAINTENANCE * SUITABLE TO WORK UNDER HARD CONDITIONS * ABLE TO PRODUCE RCC CONCRETE DETAILS: Gkedpfjflz Insx Af Asa Compacted concrete capacity : 160 m³/h Air Compressor Capacity : 1400 lt/min Aggregate Hopper : 4×40 = 160m³ or 6×30 = 180m³ Mixer Type : TWIN Shaft (4m³). 6000/4000 lt capacity Aggregate Conveyor Band : 1200 mm * 35000 mm Weighbridges: Aggregate/ Cement /Water/ Additives OPTIONS: *Cement Silo: 75-100-150-200-500 tons *Cement Silo Equipment and Screw Conveyor. Central Lubrication System Brand : ILC (made in italy) Mixer body Plates : Manganese (it can manufacture 50.000m3-450.000m3) Mixer Internal Linings (Wear Plates) : Ni- hard special hard cast material Discharging in Emergency Situations : manual Emergency Situation hand pump Emergency Stop Button available. Digital Mixer Control System (alarm) Automatic lubrication system monitor feature on pc Control System: Full automatic pc - plc – printer. Unlimited users Remote access Unlimited prescriptions and customer registration Retrospective reporting English- Russian- French- Arabic-German-Spanish languages are available. Switching materials used in the MCC dashboard are SIEMENS Back off available.

Condition: used, Year of construction: 2025, color: grey-black, empty load weight: 1 kg, fuel type: gasoline, gearing type: mechanical, TITLE: OPEN AGGREGATE CONTAINER WITH SINGLE REAR DOOR WITH TILTING DOOR OPENING - ROCK TANK CONTAINER. Suitable for 3/4 road axle vehicles or double traction. Rounded container reinforced with 600 mm hook, reinforcement at the front part's yield point, 200 mm beams. Bottom resting on the beams with lateral support shelves and 2.10 m wide support surface.  REF.: 25-N-05 TYPE: inert C NEW: yes COVER: no OPENING: single tilt door OVERALL DIMENSIONS TOTAL LENGTH: 6.25 m EXTERNAL WIDTH OF THE CASE: 2.50 m FRONT SIDE: 1.50 m REAR SIDE: 1.05 m SIDE SIDE: 0.80 m MC: 11 WEIGHT: 1830 kg BOTTOM: 5 mm WALL: 4 mm COLOUR: grey Subject to errors and/or omissions The prices shown do not include VAT. Please contact the sales team for an updated comparison of prices and conditions. For more information: Loris: 3484773001 URL: #glispecialistidelloscarrabile SCARRABILI AURORA operates in the sector of sale and purchase of industrial and commercial vehicles specialized mainly in the waste sector. Gkedpfevp S Adsx Af Aea Specialized in trucks, trailers and hook-lift equipment. With a fleet of vehicles ready for delivery of over 50 trucks and over 150 skips, containers with and without hook-lift cranes. S.E.&O Given the quantity of ads and details entered, Aurora invites you to verify the correctness of the data entered with the sales staff.

Condition: used, Year of construction: 2026, color: grey-black, empty load weight: 1 kg, fuel type: gasoline, gearing type: mechanical, TITLE: Open-top Roll-off Container for Aggregates with Single Rear Door (Drop-down Leaf) – Rock Bin Container. Suitable for 3 or 4-axle road vehicles or double drive. Round-reinforced container with 600 mm hook, reinforcement at the deformation point in the front area, 200 mm beams. Bottom rests on the beams with lateral support brackets and a support platform 2.10 m wide. REF.: 26-N-01 TYPE: Aggregates C NEW: Yes COVER: No OPENING: Single drop-down leaf rear door DIMENSIONS TOTAL LENGTH: 6.25 m OUTER BODY WIDTH: 2.50 m FRONT SIDE HEIGHT: 1.50 m REAR SIDE HEIGHT: 1.25 m SIDE WALL HEIGHT: 1.00 m CAPACITY: 14 m³ WEIGHT: 1910 kg FLOOR THICKNESS: 5 mm WALL THICKNESS: 4 mm COLOUR: Grey Errors and/or omissions excepted. Prices shown do not include VAT. Please contact our sales team for up-to-date pricing and conditions. For further information: Loris: 3484773001 URL: #rolloffspecialists AURORA ROLLOFF SYSTEMS Gkedpfxev Aqb Ej Af Aja Operates in the industrial and commercial vehicle trading sector, with a primary focus on waste management equipment. Specialists in trucks, trailers, and roll-off equipment. Stock ready for delivery includes over 50 trucks and more than 150 bodies, roll-off containers with and without cranes. E.&O.E. Given the volume of listings and details provided, Aurora recommends verifying the correctness of data with our sales staff.

Condition: used, Year of construction: 2016, Used machine Year of manufacture: 2016 Equipment and technical data: - Electrics 3x400V 50 / 60Hz - Gimbal-mounted 5-axis electrospindle 12 kW (S6) HSK F63 - 24,000 rpm - ceramic bearings incl. liquid cooling with infinitely height-adjustable extraction hood - electric-motor controlled - full rated power at approx. 12,000 rpm - speed: 1000 - 24000 rpm - drive: 3-phase HF motor, inverter-controlled - direction of rotation: clockwise/counter-clockwise - 2 controlled compressed-air connections - interface for aggregates - tool weight (rotating): 6 kg - max. saw blade Ø 350 Gkjdpfxszlbpbo Af Asa - spindle cooling: liquid cooling - extraction hood infinitely variable - Profit H350 16.30: CNC machining centre in gantry design (without tool) with digital drives (driven on both sides). The machine column of the Profit H350 16.30 is made of thick-walled, electrically welded rectangular tubes. The steel ribbing inside the column achieves high stability. - Machining field H350 16.30: Travel of the axes: X = 4000 mm Y = 1970 mm Z = 455 mm Working field: X = 3000 mm Y = 1500 mm Z = 150 mm clearance height Axis positioning speeds: depend on the selected safety system (these can be found in the layout). - Travelling gantry driven on both sides - Guide system X axis: The travelling gantry of the X axis is driven via a rack with inclined, crowned tooth form - This guarantees highest precision. The reduction gear ensures highest machining quality and repeat accuracy. The bearing is provided by means of encapsulated recirculating-ball shoes running on hardened and ground linear guides. - Guide system Y axis: The bearing is provided by means of encapsulated recirculating-ball shoes running on hardened and ground linear guides. The Y axis is positioned by means of a ground recirculating ball screw. - Guide system Z axis: The bearing is provided by means of encapsulated recirculating-ball shoes running on hardened and ground linear guides. The Z axis is positioned by means of a ground recirculating ball screw. - Automatic central lubrication: The grease is delivered in a controlled manner to the guide carriages of the X, Y and Z axes as well as to the recirculating ball screws in Y and Z. The lubrication process is carried out automatically after a specified time. - 12-position linear tool changer on the left of the machine column incl. a pick-up position for aggregates: The 12-position linear changer ensures shortest changeover times and offers sufficient space for milling tools. One aggregate change position (fitting variants see layout) Max. tool diameter 250 mm Max. tool length 240 mm - Drilling head DH 18 6H 1S: Vertical 12 spindles: 7 spindles in the X direction and 5 spindles in the Y direction. Horizontal 6 spindles: 4 spindles in the X direction and 2 spindles in the Y direction. Forward stroke = 70 mm max. drill length = 70 mm and shank D = 10 mm. All spindles are individually driven and selectable. 1 grooving saw – in the X direction max. saw blade diameter 120 mm max. blade thickness 5 mm max. speed infinitely variable up to 7500 rpm. The drilling group covers the entire working field both horizontally and vertically. - Controlled central extraction connection: Via the program control, either the drilling head or the milling spindle is extracted. This controlled slide gate achieves an optimised extraction performance. Connection diameter see layout - 6 workpiece supports: With front and rear...

Condition: used, mileage: 139,002 km, power: 120 kW (163.15 HP), first registration: 02/2022, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 02/2028, color: white, gearing type: automatic, emission class: euro6, number of seats: 6, Year of construction: 2022, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, Vehicle number (for inquiries): 07 Mercedes-Benz Sprinter 316 CDI DOKA Flatbed, 6-seater 1st owner. Maintained according to service schedule. Paint code: * 9147 Paint color Arctic White MB 9147 Interior: * VF6 Upholstery, imitation leather ARTICO black Equipment: * A50 Front axle with increased load capacity * AR3 Axle ratio I = 4.182 * BA3 Active Brake Assist * BH1 Hold function * BH6 Control code, hydraulic aggregate variant 5 * BK2 Control code, wheel brake configuration 2 * C6L Multifunction steering wheel * C71 Underrun protection, ECE * C907 - * CB8 Stabilization, level II * CL1 Steering wheel adjustable for inclination and height * CL3 Leather steering wheel * CW2 Deletion of vehicle lowering function * E07 Hill start assist * E1D Digital radio (DAB) * E1U USB socket 5 V * E3M MBUX multimedia system with 7-inch touchscreen * E43 Trailer socket, 13-pin * ED4 Fleece battery 12 V 92 Ah * EE1 230 V socket * EE5 Ultracap - locking for automatic transmission * ES0 Jump start contact * ET4 Active Distance Assist Distronic * EW6 Pre-installation for Remote Services Plus * EY5 Mercedes-Benz emergency call system * EY6 Breakdown management * F68 Exterior mirrors, heated and electrically adjustable * F907 - * FF0 Clothes hooks in passenger compartment * FF5 Storage compartment above windshield * FG8 Cup holders, front * FHL Double cab * FJ1 Folding cover for storage compartment * FJ4 Storage compartment under cockpit * FY1 Anti-theft package * G42 7G-Tronic Plus * H12 Hot water auxiliary heater / parking heater (Webasto) * H1B Operation of tachograph, front, under headliner * H21 Heat-insulating glass all around with band filter on windshield * HH9 Semi-automatic climate control system Tempmatic * HI1 Climate zone 1 (cold/comfort) * IC1 Model series C907/C910 Sprinter * IE0 Model series C907 VS30 RWD * IF4 Chassis with double cab * IG4 Standard * IG5 Basic * IH6 Head unit ECE/ROW * IK0 Complete vehicle * IL1 Domestic (Germany) * IL5 Left-hand drive Godpfx Aszbwnmsf Ajka * IR4 Wheelbase 3665 mm (BM – code for body measurements) * IT4 3.5-ton vehicle * J10 Speedometer km/h * J1A Seat belt warning device for rear seats * J55 Seat belt warning device for front passenger seat * J58 Seat belt warning device for driver's seat * J65 Outside temperature display * JA8 Crosswind assist * JD6 Intelligent tachograph EU * JH3 Communication module (LTE) for digital services * JI7 Start-up mileage, maintenance interval 60,000 km * JK5 Instrument cluster with color display * JW8 Attention Assist * K13 Main fuel tank, 71 liters * KP6 Exhaust gas cleaning SCR generation 3 * L Left-hand drive * L94 Deletion of parking lights * LA2 Headlamp assist * LB1 Lateral marker lights * LC4 Comfort roof control unit * LE1 Adaptive brake lights * LX5 Europe * M40 Generator 14V/200A * MD3 Speed limiter 120 km/h * MG3 Engine OM651 DE 22 LA 120 kW (163 hp) * MJ8 ECO start/stop function * MP6 Engine version Euro VI * MQ0 OBD (On Board Diagnosis) level D * OH3 Inspection Freshup 3 * P02 Steel flatbed with aluminum side panels * Q11 Longitudinal member reinforcement * QA8 Trailer coupling for increased trailer load 2.8/3.0 tons * R65 Spare wheel carrier under frame end * R87 Spare wheel * RF1 Tire manufacturer Continental (10) * RH2 Tires 235/65 R16 C * RM0 All-season tires * RS3 Steel wheels 6.5 J x 16 * RX5 Wheel manufacturer Maxion Wheels * S04 Co-driver's seat, adjustable * S22 Armrest

Condition: used, mileage: 139,002 km, power: 120 kW (163.15 HP), first registration: 02/2022, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 02/2028, color: white, gearing type: automatic, emission class: euro6, number of seats: 6, Year of construction: 2022, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, Vehicle number (for inquiries): 07 Mercedes-Benz Sprinter 316 CDI DOKA Flatbed 6-SEATER 1st owner. Service booklet maintained. Paint code: * 9147 Paint color Arctic White MB 9147 Interior: * VF6 Upholstery, imitation leather ARTICO black Equipment: * A50 Front axle with increased load capacity * AR3 Axle ratio I = 4.182 * BA3 Active Brake Assist * BH1 Hold function * BH6 Control code hydraulic aggregate variant 5 * BK2 Control code wheel brake configuration 2 * C6L Multifunction steering wheel * C71 Underrun protection, EG * C907 - * CB8 Stabilization stage II * CL1 Steering wheel adjustable in inclination and height * CL3 Leather steering wheel * CW2 Omission of vehicle lowering * E07 Hill start assist * E1D Digital radio (DAB) * E1U USB socket 5 V * E3M MBUX multimedia system with 7-inch touchscreen * E43 Trailer socket, 13-pin * ED4 Fleece battery 12 V 92 Ah * EE1 230 V socket * EE5 Ultracap - locking automatic transmission * ES0 Jump start contact * ET4 Active Distance Assist Distronic * EW6 Pre-installation for Remote Services Plus * EY5 Mercedes-Benz emergency call system * EY6 Breakdown management * F68 Exterior mirrors, heated and electrically adjustable Godpszbwntefx Af Aeka * F907 - * FF0 Clothes hooks in the passenger compartment * FF5 Storage compartment above the windshield * FG8 Cup holders in the front * FHL Double cab * FJ1 Folding cover for storage compartment * FJ4 Storage compartment under the cockpit * FY1 Anti-theft package * G42 7G-Tronic Plus * H12 Auxiliary hot water heater / parking heater (Webasto) * H1B Operation of tachograph in the front below the headliner * H21 Heat-insulating glass all around with band filter in the windshield * HH9 Semi-automatic controlled air conditioning system Tempmatic * HI1 Climate zone 1 (cold/comfort) * IC1 Model series C907/C910 Sprinter * IE0 Model series C907 VS30 Rwd * IF4 Chassis with double cab * IG4 Standard * IG5 Basic * IH6 Head unit ECE/ROW * IK0 Complete vehicle * IL1 Domestic (Germany) * IL5 Left-hand drive * IR4 Wheelbase 3665 mm (code for body type) * IT4 3.5-tonne * J10 Speedometer km/h * J1A Seat belt warning for rear seats * J55 Seat belt warning for passenger seat * J58 Seat belt warning for driver's seat * J65 Outside temperature display * JA8 Crosswind assist * JD6 Intelligent tachograph EU * JH3 Communication module (LTE) for digital services * JI7 Start-up mileage maintenance interval 60000 km * JK5 Instrument cluster with color display * JW8 ATTENTION ASSIST * K13 Main tank 71 liters * KP6 Exhaust gas purification SCR generation 3 * L Left-hand drive * L94 Omission of parking lights * LA2 Headlamp assist * LB1 Side marker lights * LC4 Comfort roof control unit * LE1 Adaptive brake light * LX5 Europe * M40 Generator 14V/200A * MD3 Speed limiter 120 km/h * MG3 Engine OM651 DE 22 LA 120 kW (163 hp) * MJ8 ECO start/stop function * MP6 Engine version Euro VI * MQ0 OBD (On Board Diagnosis) level D * OH3 HU Freshup 3 * P02 Steel platform with aluminum side walls * Q11 Longitudinal member reinforcement * QA8 Trailer coupling for increased trailer load 2.8/3.0 t * R65 Spare wheel carrier under frame end * R87 Spare wheel * RF1 Tire manufacturer Continental (10) * RH2 Tires 235/65 R16 C * RM0 All-season tires * RS3 Steel wheels 6.5 J x 16 * RX5 Wheels manufacturer Maxion Wheels * S04 Passenger seat, adjustable * S22 Armrest

Condition: used, Year of construction: 2018, Second-hand angle unit For woodworking CNC machining centres Year of manufacture: 2018 HSK 63 F shank with torque support with 2 horizontal tool spindles Suitable for mounting a CLAMEX grooving tool as well as a saw blade Technical specifications: Max. drive speed: 8,000 rpm Max. output speed: 12,000 rpm Permissible operating temperature: 85° Unit can be swivelled 360° around the drive shaft Sound level: 80 dB(A) Weight: 3.257 kg Availability: at short notice Storage location: Hochheim Godpfszk Nluex Af Aska

Condition: used, mileage: 30,000 km, power: 130 kW (176.75 HP), first registration: 07/2025, fuel type: diesel, color: white, gearing type: automatic, emission class: euro6, number of seats: 3, total length: 6,836 mm, total width: 2,040 mm, total height: 2,590 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, * Approved as a 3.5t vehicle * Long wheelbase * Permissible total weight * Electronic Stability Program (ESP) * Preparation for trailer hitch * One towing eye in the front * Disc brakes in the front * Front-wheel drive * Leather multifunction steering wheel with Tiptronic * Partition, without window * Three-point automatic seat belts in the front with electric belt tensioner * High roof in vehicle color * Double bench seat in the driver's cab, right side * Seat in the driver's cab, left side * Enhanced interior noise reduction * Windshield, heat-protection glass * Central locking "Keyless-Go" without safe lock * Airbags for driver and front passenger, without knee airbag, with front passenger airbag deactivation * Exhaust system concept, WLTP3 N1-III, N2//EU6EA Gkodpfx Afszqxuxe Aoa * Rubber floor covering in the driver's cab * Wooden floor in the cargo area * Approved as a truck * Sliding door on the right in the cargo/passenger compartment * Exterior mirrors left and right, convex plus wide-angle * Hinges for rear doors with enlarged opening angle * Lashing eyes for securing cargo * Lane keeping assist * C-rails, side, partition, and roof rail * Interior grab handle (entry at partition) * Exterior mirrors, electrically foldable, electrically adjustable, separately heated * Engine immobilizer, electronic * Entry handles on rear pillar, left and right * Tire pressure monitoring system, frequency 433 MHz High * Start/stop system with recuperation * Park steering assistant * Optional infotainment (MIB3 MP) version 1 * Side marker lights * Halogen double headlights * Front Assist with warning and braking on vehicles, pedestrians, and cyclists * Windshield wiper intermittent function with light/rain sensor * Key for locking system with remote control * 4 loudspeakers (passive) * Cruise control system (ACC) electronic * Daytime running light function with assistant driving light * LED interior lighting concept in the passenger/cargo compartment * Preparation for Smart TCO * Seatbelt control, E-contact in the seatbelt buckle * Wired & Wireless App-Connect * 4-cylinder turbo diesel engine 2.0 L / 130 kW (4V) TDI * Online service * Driver alertness system * With socket in the front * 8-speed automatic transmission * Preparation for alcohol interlock * With rear view camera system (version 2) * Air conditioning with electronic control * With side wind assist * With speed limiter (LIM) * Pan-European eCall * Assistance package Professional including park steering assistant & parking assist in front and rear area including side protection * With multifunction camera * Heat protection glazing * With traffic sign recognition * With step * Digital radio reception * Prepared for VW Connect and VW Connect Plus * 4-cylinder diesel engine 2.0L, aggregate 03N.G * External, USB Type-C data socket(s) and charging socket(s) with increased charging power * Hill start assistant * Parking brake * Front axle, heavy-duty design * 5-year manufacturer's warranty for Germany * Navigation system Discover Media with 26 cm (10.4") touch color display with 4 loudspeakers Van conversion service for panel vans possible: e.g., retrofitting trailer hitch 990.00 EUR, trailer load increase 714.00 EUR, front bull bar 790.00 EUR, cargo area lining from 1390.00 EUR, MIXTO conversion 6990.00 EUR, bench seat system with individual seats 7900.00 EUR. Vehicle is from the first owner, service booklet, original owner. We will gladly take your used vehicle in trade. Special financing from 5.49% possible. D

Condition: excellent (used), Year of construction: 2010, The following components of a Linck VM50 saw line are available: Condition of the machines is very good! Infeed device ZV21, model EV 50 (in stock) Profiling chipper ZD31, model VM50, 2 × 200 kW (in stock) Gksdpfjzfwlfjx Af Aja Outfeed device AV31, model VZM (in stock) Centering device VZ21, model VZV (in stock) Log rotator DV21, model DV70-2 (in stock) Additional components: Infeed and centering device EVP – available from September 2026 Profiling chipper VM50, 2 × 200 kW – available from September 2026 Profiling aggregate VMP450 F61, 4 × 110 kW – available from September 2026

Condition: excellent (used), CTS CW‑60/5.5 – Water-Cooled Climate Test Chamber The CW‑60/5.5 from CTS GmbH (Climatic Test Systems) is a mid-sized, walk-in or drive-in climate chamber designed for conducting temperature and humidity tests on multiple test specimens simultaneously. Equipment Description This climate test chamber allows you to assess the function or material properties of test objects under controlled temperature and humidity conditions. Efficient air circulation with a high re-circulation rate ensures excellent transfer to the test goods. The air handling system is located at the rear of the inner chamber. All of the aggregates are mounted in a separate frame behind the unit, providing easy access. The control system is housed in a separate switch cabinet, while the user interface is integrated into the cabinet door. To dehumidify the test chamber, it is equipped with a self-regenerating compressed air dryer. Fresh air can be supplied by a blower to purge the chamber as required. Technical Specifications: Temperature Testing: - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.5 to 1 K over time - Temperature change rate (linear with test specimen and radiant heat, measured at supply air): - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Climatic Testing: - Temperature range: +10 °C to +90 °C - Humidity range: 10% to 95% relative humidity (dew point range +5°C to +89 °C) - Temperature deviation: ±0.5 K over time - Humidity deviation: ±1 to ±3 % r.h. over time Technical data based on ambient temperature of +25 °C, rated voltage 400 V, without test specimen, without radiant heat, and without additional equipment. Dimensions: Internal dimensions (test/useable space): - Volume: approx. 5,500 liters (5.5 m³) - Internal dimensions (approx.): Height 2300 mm, Width 1600 mm, Depth 1550 mm External dimensions: - Height 2800 mm, Width 2250 mm, Depth 5000 mm Gkedpfxezizmno Af Aea Operating Data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Rated power: 58.3 kW (incl. 5 sockets) - Rated current: 86.0 A - Protection category: IP 54 Technical Design: - Refrigeration unit: water-cooled, low-noise, semi-hermetic, stepless power adjustment via electronic monitoring and control system - Environmentally friendly refrigerants: R 23 / R 404 A Notes: - Inspection possible by appointment (46325 Borken) - Shipping by freight forwarding possible – costs & organization on request - Scope of delivery: (see picture) - (Subject to modifications and errors in technical data, all information provided without guarantee!) For further questions, we are happy to assist you by phone.

Condition: excellent (used), CTS CW‑60/5.5 – Water-Cooled Climate Test Chamber The CW‑60/5.5 from CTS GmbH (Climatic Test Systems) is a mid-sized, walk-in or drive-in climate chamber designed for conducting temperature and humidity tests on multiple test specimens simultaneously. Equipment Description This climate test chamber allows you to assess the function or material properties of test objects under controlled temperature and humidity conditions. Efficient air circulation with a high re-circulation rate ensures excellent transfer to the test goods. The air handling system is located at the rear of the inner chamber. All of the aggregates are mounted in a separate frame behind the unit, providing easy access. The control system is housed in a separate switch cabinet, while the user interface is integrated into the cabinet door. To dehumidify the test chamber, it is equipped with a self-regenerating compressed air dryer. Fresh air can be supplied by a blower to purge the chamber as required. Technical Specifications: Temperature Testing: - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.5 to 1 K over time - Temperature change rate (linear with test specimen and radiant heat, measured at supply air): - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Climatic Testing: - Temperature range: +10 °C to +90 °C - Humidity range: 10% to 95% relative humidity (dew point range +5°C to +89 °C) - Temperature deviation: ±0.5 K over time - Humidity deviation: ±1 to ±3 % r.h. over time Technical data based on ambient temperature of +25 °C, rated voltage 400 V, without test specimen, without radiant heat, and without additional equipment. Dimensions: Internal dimensions (test/useable space): - Volume: approx. 5,500 liters (5.5 m³) - Internal dimensions (approx.): Height 2300 mm, Width 1600 mm, Depth 1550 mm External dimensions: - Height 2800 mm, Width 2250 mm, Depth 5000 mm Operating Data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Rated power: 58.3 kW (incl. 5 sockets) - Rated current: 86.0 A - Protection category: IP 54 Technical Design: - Refrigeration unit: water-cooled, low-noise, semi-hermetic, stepless power adjustment via electronic monitoring and control system - Environmentally friendly refrigerants: R 23 / R 404 A Notes: - Inspection possible by appointment (46325 Borken) - Shipping by freight forwarding possible – costs & organization on request - Scope of delivery: (see picture) - (Subject to modifications and errors in technical data, all information provided without guarantee!) For further questions, we are happy to assist you by phone. Gjdpfx Afszizmbs Aoka

Condition: used, Year of construction: 1998, functionality: fully functional, Used Wide Belt Sander CB 2NRT1100 for sale! Available immediately! Year of production 1998 Working width 1100mm Calibrating unit with a rubber shaft Gjdpjya Ui Ejfx Af Aoka Combi aggregate with metal shaft and shoe Pneumatic oscillation Pneumatic shoe 2 strokes Element thickness gauge Electronic material thickness display

Condition: used, Year of construction: 1999, x-travel 800 mm y-travel 630 mm z-travel 560 mm total power requirement 60 kW weight of the machine ca. 12.5 t dimensions of the machine ca. m H E L L E R (Germany) 5 Axis - CNC Controlled Horizontal Machining Centre Model FST- MC 160 / 800 / E Year 1998 Only approx. 500 hours in operation _____ Working range: Longitudinal stroke X axis 800 mm Vertical stroke Y axis 630 mm Cross stroke Z axis 560 mm NC rotary table Tilting A axis 180 ° Turning B axis 360 ° Size of pallet, approx. 250 x 620 mm Tool holder HSK 63A Spindle speeds, infinitely variable 63 - 20,000 rpm Feeds / quick feeds XYZ 1 - 70,000 mm/min Gksdpst Hwrhjfx Af Asa Spindle drive 24 kW Total electrical load, approx. 60 kW - 400 V - 50 Hz Weight, approx. 12,500 kg Accessories / Special Features * 5-Axis SIEMENS CNC Path Control, Model SINUMERIC 840 D, allows working operation on 5 sides. * Workpiece handling system: Workpiece is mounted on a pallet outside the machine and is transported via a conveyor into a lifting/turning device, which brings the workpiece onto the table, where it is automatically clamped and machined. * 40-position tool magazine with tool replacement door, and laser-operated tool breakage control. * Internal high pressure coolant supply, 50 bar. * Coolant preparation unit with filter and temperature control. * Oil mist exhaust. * Separate cooling aggregate for motor spindle and switch cabinet. * CO² fire extinguisher. * Chip conveyor. * Complete covers for the working area. Machine comes from the design department of an car manufacturer and was only used for trials. The new price in 1998 was approx. 1.3 million DM (EUR 650,000.00). The machine is very suitable for medium-sized production series. Ideal for aluminium.

Condition: used, Year of construction: 1974, max. wheel diameter 400 mm gear width 75 mm total power requirement 25 kW weight of the machine ca. 7 t L O R E N Z (Germany) Gedpfx Afst Hww Dj Aeka High Performance Automatic Gear Shaper Model LS 400 Year 1975 Serial No. 12 592 _____ External gear, max. Ø 400 mm (possibly larger) Internal gear dia. 350 mm Gear width, max. 75 mm Module range 0.5 - 6 Length of stroke 82 mm Adjustment of stroke position 0 - 100 mm Distance between shaper spindle and machine body 250 mm Spindle taper MK 5 No. of strokes, roughing/finishing process 118 - 1,000 per min Table size 400 mm Table bore 125 mm Mounting height between table and shaper head 190 / 290 mm Axial travel of tool slide, approx. 295 mm No. of teeth, approx. 12-150 Feed range, tooth depth 0.01 - 0.063 mm/stroke Feed range, rotary feed by Tool-Ø 125 0.125 - 3.15 mm/stroke Spindle drive, approx. 19 kW Total electrical load, approx. 25 kW - 380 V - 50 Hz Weight 7,000 kg Accessories / Special Features * Hydrostatic straight guides with separate hydraulic aggregate. * Built-in raiser plate approx. 100 mm to increase height of shaper head. * Hydraulic universal workpiece clamping device built by RINGSPANN to clamp ring shaped workpieces on the inner diameter with various inserts to accommodate different workpiece diameters. * Stepless Regulation of number of strokes for improving roughing and finishing process * Automatic changeover of number of strokes, and automatic feed changeover for roughing and finishing work in up to 3 cuts. * Automatic and motor-driven fixing of shaping stroke in the upper position after work is finished. * Separate switch and control cabinet. Two-hand start. * Coolant equipment with magnetic chip conveyor and chip collection container. * Various change gears, shaping tool holders, etc. Condition : Satisfactory to Good. Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. Thank you for your interest. We always have a good selection of gear machines on stock. Please let us know what you need.

Condition: used, Year of construction: 2007, table length 500 mm table width 350 mm ampere 65 A Control AGIEVISION 5 CNC total power requirement 20 kW weight of the machine ca. 4000 kg dimensions of the machine ca. m A G I E (Switzerland) CNC - Controlled Wire Cutting EDM Machine Model AGIECUT PROGRESS V 3, Year 2007 Working range, X Y Z (=height) 500 x 350 x 426 mm Wire head, U-V axis (helical/taper cuts) + / - 30 °/ +/- 70 mm Godpfxot Hxbko Af Aska Resolution of axes 0.0001 mm Speed for positioning the axes up to 3 m/Min. Tolerances (If machine is new) 4 µ Workpiece dimensions, L x W x H max. 1.050 x 650 x 420 mm Max.weight of workpiece with/w.o. Dieelektricum 400/800 kg Clamping System Universal Beams with fixing holes Cutting wire Ø 0.2 – 0.33 mm Size of wire roll up to 25 kg Cutting speed of wire 60 – 300 mm/s. Total electrical load, approx. 20 kW - 400 V - 50 Hz Weight, approx. 4,000 kg Dimensions of machine approx. 2.4 x 2.2 x 2.4 m Accessories / Special Features • AGIEVISION 5 CNC Path Control for 5 Axis with OS 2 Machining Version and With various subprogrammes for a easier and faster designing of machining programmes, Technology devices, PP 123 Agie Geometric helps, DNC-Connection,Graficheck in 2 D a. 3 D, Rethreading of wire when wire is cutted-off, Optimizing the programmed pathes, PURECUT for reduction of Oxidation on workpiece surface,10 various program-languages, and many more features. • Mobile electronic hand held control unit for manual adjustments and set-ups for new workpieces, and separate standing control panel with CD-recorder and large monitor. • “DA” PROGRESS integrated Dieelectricum Aggregate with chiller and Filtering System, large tank incorporated in machine’s basement, Koax flushing, • AGIE Generator with 65 A Capacity and cutting performance up to 300/450 mm² • AGIE Automatic Wire Threading System with wire shredder and container mounted in backside of machine. Condition : Very good. The machine comes from a first class tool and die shop. It has been kept in very good order and was regularly maintained. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: used, Year of construction: 1969, max. wheel diameter 265 mm gear width 45 mm max. module 4 min. module 0,3 max. workpiece diameter 300 mm stroke length max. 0-50 mm stroke position adjustment 25 mm distance work spindle /surface of the table 170/245 mm spindle taper innen MK 4 table-size 180 mm table hole 95/75 mm strokes per minute 450 - 840 total power requirement 10 kW weight of the machine ca. 5200 kg Gsdpfx Afst Hwruj Ajka dimensions of the machine ca. m Max. gear Æ (external) approx. 265 mm Max. workpiece Æ for internal gears 300 mm Max. gear width 45 mm Module range 0.3 - 4 Length of stroke 0 - 50 mm Adjustment of length of stroke 25 mm Distance between table and spindle, min./max. 170/245 mm Spindle taper (external 90 / internal 50) MT 4 Table size 180 mm Table bore 95 / 75 mm Table travel, cross, approx. 175 mm Number of strokes, infinitely variable 450 - 840 /min Feed range 0.09 - 0.6 mm/stroke Rotary feed, strokes per cutter revolution 2,722 - 681 Total electrical load 10 kW - 380 V - 50 Hz Weight 5,200 kg Accessories / Special Features * Selection switch for various working programmes, and for manual control. * Multi-cut device for roughing, finishing and sparkout, via presettable micrometer screws. * Hydraulic workpiece external clamping device mounted on table, for internal gears (a sort of collet chuck). * Separate switch cabinet. * Separate hydraulic unit. * Hydrostatic straight guide, with cooling aggregate for the hydrostatic pressure oil, separate. * Lateral table adjustment ensures optimal ram lift from workpiece. * Infinitely variable number of strokes via DC motor. * Built-on coolant device. * Presettable impulse counter for switching off table after every cut. With digital display. * Various change gears.

Condition: used, Year of construction: 1980, hobbing length 1750 mm milling width 260 mm max. module 10 min. module 12 total power requirement 8 kW weight of the machine ca. 4500 kg dimensions of the machine ca. m D O N A U - K N A P P (Germany) Universal Automatic Rack Milling Machine Model UZFM – V 300 H Year approx. 1980 Serial No. 80-234x Max. length of rack 1,750 mm Milling travel / milling width cross max. 260 mm Module, steel / cast iron 10 / 12 Table clamping size 275 x 1,850 mm Mounting height below cutter, depending on cutter Ø 136 – 410 mm Cutter Ø, min./max Ø 125 + 2 x cutting depth / Ø 160 mm Cutter width max. floating / with support 50 / 140 mm Cutter mandrel Ø max. 50 mm Milling spindle head, swivelling right / left 30 / 45 ° 9 spindle speeds 22 – 179 rpm Milling slide swivelling right / left 30 ° Feeds, infinitely variable (milling slide) 0 – 600 mm/min Quick return 2,000 mm/min Milling spindle drive approx. 4 kW Total electrical load 8 kW - 400 V - 50 Hz Weight 4,500 kg Accessories / Special Features: * Automatic milling cycle control via cam bloc mounted on milling slide and table slide with possibility of jump switching (= automatic by-pass of an area which should not be milled) and pendulum milling operation (= synchronized milling on the first half of table, and workpiece change on the second half. * hydraulic workpiece clamping device: 1.800 x 260 mm each, clamping width 140 mm, clamping height inside the device 60 mm, with own hydraulic aggregate, hand switch, * Manual fine adjustment of table (0.001 mm) for exact positioning in a pre-milled rackgear. * Various change gears (approx. 10 pieces). * 2 cutter mandrels. * Various other accessories. * Central lubrication. * Built-in hydraulic unit. * Simple Coolant device. Separate switch cabinet, various rack cutter up to 160 dia. This machine is especially suitable for milling racks, and also for manufacturing broaching tools (relief milling is possible by swivelling the cutter head). Condition : Very good. Machine can be inspected under power. Delivery : Ex stock, as inspected Gkjdpfxjt Hxago Af Aea Payment : Net, after conclusion of contract

Condition: new, Year of construction: 2023, New machine Gsdpfx Afezi Hwfe Aeka Year of manufacture: 2023 MACHINESEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our designated sales area in Germany (Rhine-Main region and North Rhine-Westphalia). Such enquiries will not be answered. Equipment and technical specifications: In intermediate lacquer sanding (Cd-L) configuration Robust, space-saving single wide-belt sander for demanding calibration and fine sanding tasks • Constant working height due to upper part adjustment • Working width: 1350 mm • Over-belt sanding with combination unit • Entire sanding unit inclinable up to 10° • Serrated rubber contact roller of proven hardness • Infinitely adjustable contact roller height according to a grain scale • Pneumatic lifting/lowering of the contact roller according to aggregate selection • Sanding pad with quick-release sliding insert • Parallel spring-loaded, ground steel pressure roller at the infeed • Rubberized pressure roller at the outfeed • Belt drive motor: 11 kW (1100 mm), 15 kW (1350 mm), 18.5 kW (1600 mm), 400 V/50 Hz, soft start for low current draw at startup • Electrically controlled, precisely adjustable height positioning with digital readout • Belt tensioning, control, and oscillation: pneumatic, compressed air usage approx. 2 l/min • Optimum safety thanks to automatic immediate stop with disc brake in case of belt break, belt drift, pressure drop, or opening of belt access door • Workpiece feed: 1.1 or 1.5 kW with fabric-reinforced rubber conveyor belt • Vacuum device for worktable with small parts section, fan integrated in machine frame • Complete electrical system with contactor control; automatic star-delta start of main motor, motor protection, and ammeter for chip removal monitoring • Pass-through height: 200 mm • Sanding belt dimensions: 1350 x 2000 mm • Automatic thickness adjustment across the full working width • Workpiece overthickness protection with immediate feed stop and automatic lifting of machine upper structure • Stepless regulation of material removal • Electronic feed regulation on the control panel, stepless from 3 – 15 m/min • PLC control/programming with color touchscreen and TEACH-IN memory (one-touch based on sanding result, no input required) • Pneumatic conveyor belt tracking control • Workpiece support tables at infeed and outfeed • ENORMATIC: Fully automated rapid setup and feed activation (very useful for large workpieces) • eco* energy-saving mode • Error diagnostics • Order and operating hour counters - Electronic segmented sanding pad, segment width 22 mm (swiveling special version) - Steplessly adjustable sanding belt speed (with program memory) - Ejector nozzles for sanding belt cleaning, demand-controlled, with additional extraction nozzle - Additional sanding shoe insert for lacquer sanding Including swiveling air knife, complete Availability: short notice Location: Flörsheim

Condition: used, mileage: 43,602 km, power: 110 kW (149.56 HP), first registration: 10/2022, fuel type: diesel, overall weight: 3,000 kg, next inspection (TÜV): 11/2026, color: silver, gearing type: automatic, emission class: euro6, number of seats: 3, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Vehicle number (for inquiries): 143-T MERCEDES-BENZ SPRINTER 215 HIGH + LONG Paint code: * 9775 Paint color Iridium Silver MB 9775 Interior: * Fabric, black Equipment: * 9775 Paint color Iridium Silver MB 9775 * BH1 Hold function * BH8 Control code, hydraulic aggregate variant 7 * BK2 Control code, wheel brake configuration 2 * C6L Multifunction steering wheel * C910 - * CL1 Steering wheel adjustable in inclination and height * D03 High roof * D50 Fixed partition * E07 Hill-start assist * E1D Digital radio (DAB) * E3M MBUX multimedia system with 7-inch touchscreen * ED4 Fleece battery 12 V 92 Ah * ES0 Jump start contact * ES5 Charging package, instrument panel * EW6 Pre-wiring for Remote Services Plus * EY5 Mercedes-Benz emergency call system * EY6 Breakdown management * F64 Exterior mirrors, electrically foldable * F68 Exterior mirrors, heated and electrically adjustable * F910 - * FG8 Cup holders, front * FJ4 Stowage compartment under dashboard * FKA Box van * FY7 Multi-button remote control * FZ9 Two main keys additional * GK8 9G-TRONIC * HH9 Semi-automatic climate control system Tempmatic * HI1 Climate zone 1 (cold/comfort) * IC1 Model series C907/C910 Sprinter * IF0 Model series C910 VS30 Fwd * IG4 Standard * IG5 Basic * IH6 Head unit ECE/ROW * IK0 Complete vehicle * IL1 Domestic (Germany) * IL5 Left-hand drive * IL6 Metallic paint * IS3 Wheelbase 3924 mm (code for basic model) * IT3 3.0-tonne * J0V Pre-wiring for blind spot assist * J10 Speedometer km/h * J55 Seatbelt warning system for passenger seat * J58 Seatbelt warning system for driver seat * J65 Outside temperature display * JA8 Crosswind assist * JB7 Parking package with reversing camera * JH3 Communication module (LTE) for digital services * JI6 Start-up sequence, maintenance interval 40,000 km * K12 Main tank 65 liters * KP7 Exhaust gas purification SCR Generation 4 * L Left-hand drive * L94 Parking light deleted * LA2 Headlamp assist * LB5 3rd brake light * LE1 Adaptive brake lights * LX5 Europe * M40 Generator 14V/200A * M72 Vehicle capable of running on HVO fuel * MJ8 ECO start/stop function * MT6 Emissions class Euro 6D N1 * MU3 Engine OM654 DE 20 LA 110 kW (150 hp) * P2M Parking assist package * Q11 Longitudinal member reinforcement * RN5 Tires 225/65 R16 C * RS3 Steel wheels 6.5 J x 16 * RX5 Wheel manufacturer Maxion Wheels * S02 Driver's seat * S22 Armrest for driver's seat, ISO-fix (child seat attachment system) * S23 Passenger seat, double seat * SA5 Airbag, driver * SK2 Seat occupancy recognition for driver's seat * T16 Sliding door, right * T77 Grab handle, entrance to cargo compartment, sliding door, on partition Gjdpfx Aozp A Exjf Aska * T86 Grab handle on rear corner pillar, right * V94 Conductor channel on side wall * V95 Conductor channel on rear portal * VA3 Interior lining, cargo compartment up to roof height, washable * VF7 Fabric Maturin, black * VK8 Floor covering, plastic * WB9 Control code, factory * WM2 Control code, factory * WM3 Control code, factory * WM9 Control code, factory * WN2 Control code, factory * WZ7 Control code, factory * X30 Vehicle registration document part 2 * X3G Weight variant 3,000 kg * X99 Manufacturer Mercedes-Benz AG * XC9 COC documents * XI2 Model year G2-I * XM1 Noise reduction measure * XO9 Mercedes-Benz Mobilovan with DSB and GGD * XU1 Signage/printed material, German * XV0 Control code - BZM test

Condition: used, mileage: 43,602 km, power: 110 kW (149.56 HP), first registration: 10/2022, fuel type: diesel, overall weight: 3,000 kg, next inspection (TÜV): 11/2026, color: silver, gearing type: automatic, emission class: euro6, number of seats: 3, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Vehicle number (for inquiries): 143-T MERCEDES-BENZ SPRINTER 215 HIGH + LONG Paint code: * 9775 Paint color Iridium Silver MB 9775 Interior: * Fabric, black Equipment: * 9775 Paint color Iridium Silver MB 9775 * BH1 Hold function * BH8 Control code, hydraulic aggregate variant 7 * BK2 Control code, wheel brake configuration 2 * C6L Multifunction steering wheel * C910 - * CL1 Steering wheel adjustable in inclination and height * D03 High roof * D50 Continuous bulkhead * E07 Hill-start assist * E1D Digital radio (DAB) * E3M MBUX multimedia system with 7-inch touchscreen * ED4 Fleece battery 12 V 92 Ah * ES0 Jump-start contact * ES5 Charging package, instrument panel * EW6 Pre-installation for Remote Services Plus * EY5 Mercedes-Benz emergency call system * EY6 Breakdown management * F64 Exterior mirrors, electrically foldable * F68 Exterior mirrors, heated and electrically adjustable * F910 - * FG8 Cupholders, front * FJ4 Storage compartment under cockpit * FKA Box van * FY7 Multi-button remote control * FZ9 Two additional main keys * GK8 9G-TRONIC * HH9 Semi-automatic controlled air conditioning system Tempmatic * HI1 Climate zone 1 (cold/comfort) * IC1 Model series C907/C910 Sprinter * IF0 Model series C910 VS30 FWD * IG4 Standard * IG5 Basic * IH6 Head unit ECE/ROW * IK0 Complete vehicle * IL1 Domestic market (Germany) * IL5 Left-hand drive * IL6 Metallic paint * IS3 Wheelbase 3924 mm (BM-forming code) * IT3 3.0-tonne vehicle * J0V Pre-installation for blind spot assist system * J10 Speedometer, km/h * J55 Seatbelt warning system for co-driver seat * J58 Seatbelt warning system for driver seat Gkedpfx Aszp A E Esf Asa * J65 Outside temperature display * JA8 Crosswind assist * JB7 Parking package with reversing camera * JH3 Communication module (LTE) for digital services * JI6 Start mileage, maintenance interval 40,000 km * K12 Main tank 65 liters * KP7 Exhaust gas purification SCR generation 4 * L Left-hand drive * L94 Parking lights omitted * LA2 Driving light assistant * LB5 3rd brake light * LE1 Adaptive brake light * LX5 Europe * M40 Generator 14V/200A * M72 Vehicle capable of running on HVO fuel * MJ8 ECO start-stop function * MT6 Emission class Euro 6D N1 * MU3 Engine OM654 DE 20 LA 110 kW (150 hp) * P2M Parking Assist Package * Q11 Longitudinal member reinforcement * RN5 Tires 225/65 R16 C * RS3 Steel wheels 6.5 J x 16 * RX5 Wheel manufacturer Maxion Wheels * S02 Driver's seat * S22 Armrest for driver's seat, ISO-fix (child seat attachment system) * S23 Co-driver seat, single seat * SA5 Airbag, driver * SK2 Seat occupancy recognition, driver's seat * T16 Sliding door, right * T77 Grab handle, entry to loading space sliding door on partition * T86 Entry handle on rear corner pillar, right * V94 Cable conduit on side wall * V95 Cable conduit on rear portal * VA3 Interior lining of loading space up to roof height, washable * VF7 Fabric Maturin, black * VK8 Floor covering, plastic * WB9 Control code, factory * WM2 Control code, factory * WM3 Control code, factory * WM9 Control code, factory * WN2 Control code, factory * WZ7 Control code, factory * X30 Vehicle registration certificate, part 2 * X3G Weight variant 3,000 kg * X99 Manufacturer Mercedes-Benz AG * XC9 COC documents * XI2 Model year G2-I * XM1 Noise reduction measure * XO9 Mercedes-Benz Mobilovan with DSB and GGD * XU1 Signage/printed matter, German * XV0 Control code - BZM inspection

Condition: new, BENZ HSK TILTING AGGREGATE DRILLING HEAD MILLING CUTTER Gedpfx Afezq Dgaj Aska

Condition: used, Year of construction: 2000, Overview This cold glue labeling machine was manufactured in 2000 by Krones. The machine is designed for the application of cold glue labels on bottles. The machine is equipped with three labeling aggregates (front, back, and neck/seal label) and operates with a 20-head rotary table, making it suitable for medium-speed beverage production lines. The unit includes an integrated Krones Checkmat inspection system for quality control and comes with 11 bottle formats (0.5 – 1.0 L). Maintenance was performed as required. Technical data Gedpfoy Azv Sox Af Aoka - Capacity: up to approx. 15,000 bph - Formats: 0.5 L – 1.0 L, 11 formats - Application: Cold glue labeling of bottles - Configuration: 20-head rotary table, 3 labeling aggregates - Label positions: Front, back, neck/seal label - Utilities: Standard Krones control system - Incl. 3 glue pumps for cold glue system, Inspection system (Krones Checkmat), Format parts, Documentation

Condition: used, Year of construction: 2021, Overview This rotary cold glue labelling machine was manufactured in 2021 by Germany GERNEP. The machine is designed for cold glue labelling of glass bottles, primarily in the beer industry. It is equipped with one cold glue labelling aggregate and is prepared for the installation of an additional unit. The system features a mechanical bottle table drive (control cam system) and a Krones glue pump for consistent label application. Technical data - Capacity: approx. 5,000 bottles/hour - Speed range: approx. 1,000 – 6,000 bottles/hour - Formats: 0.33 L / 0.5 L glass bottles - Application: Labelling of glass bottles (beer) - Configuration: Rotary machine with 1 cold glue labelling aggregate (prepared for 2nd unit) - Label positions: Body / wrap label, neck / chest label - Utilities: 400 V / 50 Hz / GND / N Scope of Delivery Gkodsyzcyvepfx Af Asa - Labelling machine | GERNEP | Labetta 4/3/8 480 1A | 2021 | Rotary cold glue labeller with 1 aggregate (prepared for second unit) - Glue system | Krones | Glue pump - Control system | GERNEP | Touch panel

Condition: used, Year of construction: 2019, Overview This rotary cold glue labelling machine was manufactured in 2019 by Germany GERNEP. The machine is designed for cold glue labelling of glass bottles, particularly in the wine industry. It is equipped with two cold glue labelling aggregates for the application of body, neck ring and back labels. The machine features a servo-driven bottle table and a Krones glue pump for precise label application. Technical data - Capacity: approx. 5,000 bottles/hour - Speed range: approx. 1,000 – 5,500 bottles/hour - Formats: - 0.75 L Bordeaux (H=309 mm, Ø74 mm) - 0.75 L Schlegel (H=330 mm, Ø76 mm / H=350 mm, Ø78 mm) - 1.0 L Schlegel (H=309 mm, Ø89 mm) - 0.75 L Burgunder (H=297 mm, Ø82 mm) - Application: Labelling of glass bottles (wine) Gsdpoyzcycofx Af Aeka - Configuration: Rotary machine with 2 cold glue labelling aggregates - Label positions: Body (front), neck ring, back - Utilities: 400 V / 50 Hz / 3 Phase / N / PE Scope of Delivery - Labelling machine | GERNEP | Labetta 4/3/12 784 2A SD | 2019 | Rotary cold glue labeller with 2 aggregates - Glue system | Krones | Glue pump - Control panel | GERNEP | Touch panel