Used Air Compressors for sale (27,807)

Condition: used, Year of construction: 2002, Technical details: pressure capacity: 10 bar tank: 350 l motor: 2 x 2,2 kW volume capacity: 2 x 275 L/min weight: 555 kg Fsdpfju Nz Sljx Al Uopn total power requirement: 2,2 kW dimensions L x W x H: Kompressor: 2,7 x 1,0 x 1,55 m pressure vessel: Größe: L:2,4 x Ø 450 m compressor is free of oil and with noise reducer insulation consists of : 2 compressor - each 3 cylinder Besteht aus: Air pressure tank: - Make Mehrer - Permissible operating pressure 11 bar - YOM 1995 Exhaust air over 1 1/2 "reduced to 1", hose connection Ø 14 x 27 mm with shut-off valve Operation via control panel Permissible operating temperature 50 ° C i.D. *

Condition: new, Year of construction: 2025, Hoku BK119-270-10-VKK upright piston compressor with refrigerant dryer, automatic condensate drain, oil-water separator, pre- and fine filters, mounted with rubber vibration dampers on a safety pallet. Universal piston compressors with belt drive and high-quality features. Pressure vessel manufactured according to German AD 2000 regulations. Intake capacity: 650 l/min Effective delivery rate: 520 l/min Maximum pressure: 10 bar Tank volume: 270 l Cylinders/stages: 2/2 Speed: 920 rpm Motor power: 4 kW/400 Volt Air throughput: 650 m³/h Motor power: 4 kW Fpodpfxjr Ig Aho Al Uon Machine dimensions: 1200 x 800 x 2000 mm Pressure vessel: 270 L Effective delivery volume: 520 L/min Intake volume: 650 L/min Maximum pressure: 10 bar Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, A truly reliable and mobile family: AL-KO POWER UNIT® dust extraction systems are available for maximum volume flows between 790 and 10,000 m³. This makes the energy-efficient AL-KO POWER UNIT® models the perfect solution for small to medium dust extraction volumes or an ideal addition to existing stationary systems. Your advantages: • IE 3 motor as standard • approx. 73 m² filter area • Pre-separator as standard • Certified according to GS-HO-07 • H3 residual dust content of 0.1 mg/m³ is reliably maintained (wood dust) • optionally with type-tested rotary valve airlock (FSA) • Tested backflow flap • Integrated automatic extinguishing system Technical data: • Motor rated power: 11.0 kW / 3-phase Fpsdpfxohkzt Ne Al Usn • Voltage: 400 V / 50 Hz • max. volume flow: up to 8,500 m³/h at the fan • Rated volume flow: 6,927 m³/h • Negative pressure at Vnenn.: 2,543 Pa • Suction nozzle: 350 mm • Noise level: 71 dB (A) at full load (according to DIN EN ISO 11201) • Chip collection volume (net/gross): 3 x 165 L / 3 x 250 • Dimensions (L x W x H) in mm: 3,130 x 1,058 x 2,361 • Net weight without packaging: 977 kg • Dust class H3 Location: Available from stock at 54634 Bitburg • immediately available – in stock Subject to prior sale

Condition: new, Year of construction: 2025, Chip extraction unit ASA 7703 mobile, with extraction unit that can be rotated by 180° For milling, planing, and sawing chips (not suitable for dust) Extraction unit can be rotated by 180°, allowing for extraction from below or above Robust metal fan impeller Comes standard with high-quality chassis for improved stability and easy maneuvering Quick-release fasteners for filter and chip bag Fine filter bag, double-woven Dimensions and weights Fsdpfx Aohk S Stjl Uepn Chip collection volume 2 x 290 l External diameter of extraction nozzle, inlet 260 mm External diameter of extraction nozzle, outlet 3 x 120, 1 x 100 mm Length approx. 1900 mm Width/Depth approx. 670 mm Height approx. 2800 mm Weight approx. 88 kg Electrical data Idle speed 2950 min¯¹ Power consumption 4.8 kW Connection voltage 400 V Mains frequency 50 Hz Filter Filter area 2 x 5.98 m² Noise emission Maximum sound pressure level 98.3 dB(A) Volume flow Nominal volume flow 7700 m³/h Maximum negative pressure 2800 Pa Scope of supply: Two filter bags, two chip bags Location: In stock at warehouse 54634 Bitburg - available for immediate delivery -

Condition: new, Year of construction: 2025, Raw air extraction unit ASA 141 With standard chassis Dimensions and weights Chip collection volume: 175 l Nominal outer diameter of extraction nozzle inlet: 140 mm Length approx.: 1062 mm Width/depth approx.: 648 mm Height approx.: 2300 mm Weight approx.: 40 kg Electrical data Connection voltage: 230 V Mains frequency: 50 Hz Filter Filter area: 1.9 m² Noise emission Maximum sound pressure level: 78 dB(A) Volume flow Nominal volume flow: 1650 m³/h For milling, planing, and sawing chips (no dust) Significantly reduced dust content thanks to BIA-tested filter material with a high separation rate Housing parts and impellers made of high-strength special plastic Quick-release fasteners for filters and chip bags for easy maintenance Robust, high-quality design Easy to move thanks to swivel castors Low power consumption Extraction systems comply with dust class L Fpjdehk S Swspfx Al Uon Scope of delivery: Unit body with mounted fan unit Filter bag / extraction unit Chip bag / extraction unit without extraction hose

Condition: new, Year of construction: 2025, Exhibition model – sold at a special price Sold at a special price Technical data 300-P Intake nozzle: 300 mm Motor rated power: 7.5 kW / 3-phase Fpodpfx Alocdy I Tj Uon Voltage: 400 V / 50 Hz Max. volumetric flow: 6,000 m³/h Rated volumetric flow: 5,089 m³/h Negative pressure: 2,280 Pa Filter area: 30 m² Chip collection volume: 3 x 250 L Dimensions (L / W / H) in mm: 2963 x 994 x 2346 Weight: 880 kg Special feature: The unit is equipped with a noise silencer – therefore extremely quiet – can be sold with or without it. Location: Available from stock at 54634 Bitburg.

Condition: new, Year of construction: 2025, Description: IE 3 motor as standard Maximum volume flow up to 8,500 m³/h at the fan Approximately 73 m² filter area, residual dust content after H3 Pre-separator as standard 71 dB (A) at full load (according to DIN EN ISO 11201) Already meets the requirements of prEN 16770 Optional: Models with type-tested rotary valve airlock (FSA) Tested backflow damper Integrated automatic extinguishing system Suction nozzle: 350 mm Motor rated power: 11 kW Fjdpfx Alscqy I Se Uspn Voltage: 400 V / 50 Hz Maximum volume flow: 8500 m³/h Rated volume flow: 6927 m³/h Negative pressure at Vnenn.: 2765 Pa Filter area: 73 m² Chip collection volume: (net/gross) 3 x 165 L / 3 x 241 L Sound pressure level: 71 dB (A) Dimensions (L x W x H): 3112 x 1058 x 2351 mm Weight: 1074 kg Location: in stock at 54634 Bitburg

Condition: new, Year of construction: 2024, Effective delivery rate approx. 1050 l/min Maximum pressure 10 bar Tank capacity 270 l Air outlet ½" Sales unit 1 Fsdsfh Hahspfx Al Uopn Dimensions and weights Length approx. 1200 mm Width/Depth approx. 650 mm Height approx. 1540 mm Weight approx. 295 kg Electrical data Power consumption of electric motor 7.5 kW Connection voltage 400 V Phase(s) 3 phases Type of current AC Mains frequency 50 Hz Noise emission Sound pressure level Lp 62 dB(A) Explanation of sound pressure level: Sound pressure level at a distance of 1 m according to DIN 45635 T 13 Motor(s) Motor type Electric Location: In stock at warehouse 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Al-Ko Clean Air Dust Collector Exhibition piece (no operating hours yet – new) Technical data, Power Unit 250 P Intake nozzle: 250 mm Motor rated power: 6.5 kW / 3-phase Voltage: 400 V / 50 Hz Maximum air flow: 4900 m³ / h Rated air flow: 3524 m³ / h Negative pressure: 2451 Pa Filter area: 22.4 m² Fedpfxebuvbro Al Uepn Chip collection volume: 2 x 250 L Dimensions (L / W / H) in mm: 2305 x 994 x 2351 Weight: 758 kg Location: available from warehouse 54634 Bitburg

Condition: new, Year of construction: 2025, Schneider compressor UNM 510-10-90 D A714000 Mobile piston compressor with horizontal tank Fpodpfx Aebyhvrjl Usn Standard equipment includes all safety fittings and an electrical connection cable with plug and Condor pressure switch Compressed air tank equipped with a safety valve, tank pressure gauge, and condensate drain valve The welded-on rear handle improves loading and transport capabilities Fully automatic operation via a pressure switch with start-up relief, motor protection, and on/off switch Featuring enhanced equipment for universal use With V-belt drive, 2 cylinders in an in-line arrangement for particularly smooth operation, and a 400 V three-phase motor with external motor protection Low compressor speed – this protects the compressor components, reduces noise levels, and minimizes vibrations Large fan impeller for optimal cooling Including filter pressure regulator for regulated compressed air that is free of condensate, dirt, and oil With a 2 m device connection cable with rubber sheathing and an air outlet via a quick-release coupling Device connection cable with phase inverter 10-year warranty on the tank against rust Technical data Pressure: 10 bar Intake capacity: 510 l/min Delivery capacity: 390 l/min Speed: 1240 min-1 Tank volume: 90 l Weight: 80 kg Noise: 97 dB(A) Dimensions (W x D x H): 1070 x 495 x 895 mm Drive power: 3.0 kW Voltage: 400 V Location: In stock at Bitburg warehouse Subject to prior sale.

Condition: used, overall weight: 37 kg, SIEMENS 3WN6 WITHDRAWABLE AIR CIRCUIT BREAKER – 1,000 A Manufacturer: Siemens Series: 3WN6 Type: 3WN6271-7FH58-1KA3-Z Version: withdrawable air circuit breaker Number of poles: 3 Frame size: I Rated current In: 1,000 A Frequency: 50/60 Hz Fpedpfx Aszw Tx Esl Uen Rated operational voltage Ue: 500/690 V AC Breaking capacity Ics = Icu: 65 kA at 500 V / 50 kA at 690 V Short-time withstand current Icw: 50 kA for 0.5 seconds Rated impulse withstand voltage Uimp: 8 kV Utilisation category: B Motor operating mechanism: 220–240 V AC / 220–250 V DC F1 shunt release: 220–240 V AC / 220–250 V DC Y1 closing coil: 220–240 V AC / 220–250 V DC Options stated on nameplate: F21, S22, S21 and S05 Standards: IEC/EN 60947-2 and DIN VDE 0660 T.101 Identity number: 3200904083 Estimated net weight: approximately 37 kg Made in Germany Siemens 3WN6 withdrawable air circuit breaker for switching and protecting industrial low-voltage power distribution systems. The breaker is equipped with an electrical motor operating mechanism, closing coil, shunt release and electronic overcurrent trip unit. Pre-owned unit. As the complete operating history is not known, the unit is offered as used. It has not recently been functionally or load tested by us in a switchgear installation. Inspection and testing by a qualified electrical specialist are required before commissioning. The photographs show the actual unit offered and the included scope of supply. Please verify the complete type number, control voltage, connections and compatibility with the existing switchgear before purchasing. Available from stock. Worldwide freight shipment can be arranged. 9 units available

Condition: used, - Manufacturer: Venjakob - Model: VEN DRY DTK 040 - Used machine - Working width: 1,300 mm - Working height: 880 ± 20 mm - Max. part height ~ 80 mm (more available as an option) - Length of nozzle drying channel 6,000 mm - Air velocity 25 m/s - Max. recirculating air flow rate 7,400 m³/h - Min. supply air 900 m³/h - Min. exhaust air flow rate 900 m³/h - Max. drying temperature ~ 50 degrees - Heating capacity 57.2 kW - Air velocity max. 23 m/s Fodpszv Tfpsfx Al Uspn - With heat exchanger, heating water PWW 90/70°C - Belt conveyor 6,500 mm - Feed speed continuously adjustable approx. 3.0 - 7.0 m/min - Location: Blomberg warehouse - Voltage, Hz: 400 / 50 - Electrical connection: 10 kW (4.6 + 1.5 kW) - Voltage fluctuations: max. +/- 5% - Without control valves and water pumps

Condition: used, Year of construction: 1998, Used Machine Year of Manufacture: 1998 Fpjdpfezwqd Eex Al Ujn Features and Technical Specifications: - With pneumatic JET filter cleaning - Airflow rate over 6,000 m³/h - 8.5 kW motor - 300 mm suction connection - 2 collection containers - CE mark

Condition: used, Year of construction: 2005, feed pressure 10 bar liter capacity 2,66 m³ / min total power requirement 18,5 kW motor speeds: 3000 min/1 dimensions 1200 x 900 x 1200 mm weight of the machine ca. 150 kg Fpsdpfx Aovuz Rhjl Usn

Year of construction: 1997, condition: used, feed pressure 10 bar liter capacity 1400 m³ / min dimensions 700 x 550 x 1100 mm Fodpjqvcldefx Al Uepn total power requirement 11 kW weight of the machine ca. 275 kg

Condition: new, feed pressure 10,0 bar intake capacity 727 L/min Effective free air delivery 582 L/min Receiver capacity 90,0 Ltr. motor 400 V power capacity 4,0 kW weight of the machine ca. 91,0 kg. Fedpsw U U Taefx Al Uopn dimensions of the machine ca. 1040 x 450 x 850 mm Description : - mobile craftsman piston compressor - High-quality processed, 2-stage compressor block - with 2 cast iron cylinders and optimum efficiency - Finely ribbed cylinder and cylinder head for optimal temperature dissipation - low compressor speed to reduce the compression temperature and minimizing wear and tear - Very low residual oil content in the compressed air thanks to precision piston rings - Generously dimensioned solid rubber wheels and castors at the front - the start-up relief takes place via a mechanical vent valve - powder-coated compressed air tank in RAL 7035 - Built in accordance with the European Pressure Equipment Directive - all fittings are sealed with easily removable special adhesive and can easily be exchanged if necessary The standard scope of delivery includes: - Condor pressure switch MDR 3 - a high quality filter pressure reducer - two pressure gauges - a condensate drain tap - a pre-assembled connection cable with 5-pin. connector and phase reversal

Condition: used, Year of construction: 2005, operating hours: 43,152 h, functionality: fully functional, machine/vehicle number: API570324, overall weight: 1,076 kg, total length: 1,700 mm, total width: 900 mm, total height: 1,600 mm, space requirement length: 2,700 mm, space requirement width: 1,900 mm, space requirement height: 2,100 mm, power: 37 kW (50.31 HP), fuel type: electric, volume flow: 406.8 m³/h, operating pressure: 13 bar, pressure (max.): 13 bar, Equipment: documentation/manual, refrigerant dryer, type plate available, Complete industrial compressed-air package comprising an Atlas Copco GA37 VSD 37kW variable-speed rotary screw compressor together with a 2018 Hi-Line Tundra 300 refrigerated air dryer. The variable-speed drive automatically adjusts compressor output according to air demand, making this an efficient solution for industrial applications with varying compressed-air requirements. The equipment is surplus to requirements and is available for inspection in Caerphilly, South Wales. Fpjdpfx Aezzpttol Uon The system includes a HI-LINE TUNDRA 300 REFRIGERATED AIR DRYER - Model: Tundra 300 - Year: 2018 - Maximum working pressure: 16 bar - 230V single-phase - Power: 1.73kW - Refrigerant: R407C - Serial No: 18M-014875 - Original operating manual included The dryer has been installed alongside the Atlas Copco to provide a complete compressed-air solution. The equipment is surplus to requirements and is available for inspection in Caerphilly, South Wales. Available for inspection by appointment. Location: Caerphilly, South Wales Buyer to arrange collection/disconnection and transport. Further photographs and operating information available on request.

Condition: new, With this offer, you are purchasing a new ‘Apodis Airguard 1000’ air purifier. Item for sale: 1 x Apodis Air Guard with the following specifications: As an experienced medical technology company specialising in filter systems, it was only natural for us to offer this quality for the home, waiting room or office. With the AIR GUARD 1000, we have succeeded in developing a product that is perfect for smaller rooms while maintaining the same professional quality. Whether due to the current situation, the next flu season or for allergy sufferers, the AIR GUARD filters harmful aerosols, viruses, bacteria, pollen and dust from the air before it is returned to the room. Condition: This offer is for a new device. Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! For more information, please feel free to contact us personally. Fodpfx Alsxn Hy De Ujpn

Condition: excellent (used), Year of construction: 2012, operating hours: 5,735 h, functionality: fully functional, power: 90 kW (122.37 HP), volume flow: 840 m³/h, pressure (max.): 7.5 bar, type of cooling: water, Oil-free screw compressor, Atlas Copco ZR90 90 kW 7.50 bar 14 m3/min Fpedpfx Aljzqvvas Uen Year of manufacture: 2012 Operating hours: 5735

Condition: new, machine/vehicle number: 691340002, hoku 119-90 – 2-stage, compression-enhancing, mobile piston compressor The universal model with V-belt drive and high-quality components, specifically designed for tradespeople, for use in environments where the quality of compressed air, as well as durability and efficiency, are essential. Long service life thanks to high-performance units with low speeds, safe transport and excellent stability thanks to large wheels with parking brake, optimal cooling through a large fan wheel, an aftercooler with cooling fins ensures a low Fedpovl Ev Aofx Al Uopn tank inlet temperature and thus less moisture in the compressed air, improved efficiency through optimized units, comes standard with a Condor pressure switch, pressure gauge, pressure regulator with water separator and quick-release coupling, motor with overload protection. Technical data: Intake capacity 674 l/min, delivery capacity 505 l/min, maximum pressure 10 bar, tank capacity 90 l, cylinders/stages 2/2, speed 920 min-1, motor power 4 kW / 400 V Ex works, from the Seevetal location, without transport, as inspected, subject to prior sale.

Condition: used, Year of construction: 2015, operating hours: 49,965 h, functionality: fully functional, power: 90 kW (122.37 HP), volume flow: 950.4 m³/h, pressure (max.): 8.5 bar, type of cooling: air, Screw compressor Kaeser CSDX165SFC Inverter integrated 90 kW 8.50 bar 15.84 m3/min Fpsdpfx Ajznmqcol Uen Year of manufacture: 2015 Operating hours: 49,965

Condition: excellent (used), Year of construction: 2017, operating hours: 10,846 h, functionality: fully functional, power: 28 kW (38.07 HP), volume flow: 254.4 m³/h, pressure (max.): 13 bar, type of cooling: air, Screw compressor, Variable28 Inverter integrated. 28 kW 13 bar 4.24 m3/min Fpjdjznuf Uspfx Al Ujn Year of manufacture: 2017 Operating hours: 41,635

Condition: good (used), Filter system, clean air filter, fine filter, filter, compact filter, particulate filter, filter cassette -Manufacturer: AAF International, air filter type AstroCel ® II Fpodjw U N Tuepfx Al Usn -Part No: 12-1210-0205 -Front frame dimensions: 570x1170x110 mm, see photo type plate -Number: 3x air filters available -Price: per piece -Dimensions: 1170/110/H570 mm -Weight: 11 kg/piece

Condition: excellent (used), Year of construction: 2016, Construction compressor Manufacturer: Atlas Copco Model: XAVS 186 Year of manufacture: 2016 Operating hours: approx. 657 h - Delivery pressure: max. 14 bar - Flow rate: max. 11.4 m³/h Fjdpswubzrefx Al Uepn - Power: 104 kW - Engine: John Deere 4045HAC05 - Aftercooler - Water separator - Weight: approx. 2.45 t

Condition: good (used), Year of construction: 2010, This is your *KAESER SK 25 compressor + 500L tank + TBH 23 dryer*. - *KAESER SK 25 - SIGMA screw compressor* - *Part No. 101958.0 / Serial 1562* - *Hour meter:* - Photo 1: *20,704 total hours* - This is low for a KAESER; they typically run for 60,000 hours. - Photo 2: *5,224 hours under load* (1) - This represents the core operating time of the machine. - Photo 3: *314 hours* - Hours under pressure (2). Fpodpfx Ajz Ab A Ael Ujn - *Displayed pressure 0.0 bar = normal shutdown, no fault.* - *Complete set:* - SK25 compressor (15 kW - approximately 2 m³/min at 8 bar) - Vertical tank X. PAUCHARD 500L galvanized (with pressure gauge) - KAESER TBH 23 KRYOSEC refrigeration dryer.