3 piece chisel hammers, in the systainer, Schneider SMH 19SYS, air requirement: 320 l / min working pressure: 7 bar, recording: 6-edged shank 12 mm, stroke: 2,400 / min, stroke length: 60 mm, weight: 3.2 kg, capacity: chisel hammer SMH 19, Spitzmeisel 190 mm, Flachmeisel 190 mm, goggles
More pictures and information on request.
Visit is recommended.
Air hammer Fabr. ADOLF BERGER type B-40
Bear weight 40 kg
Bear stroke 200 mm
Stroke 200 strokes/min.
Motor 4,0 kW
used, in very good condition
Nominal mass of drop parts kg 3150
Rated striking energy 80 KJ
Max. no. of blows/min. 56
Ram stroke 1250 mm
Uprights distance 710 mm
Ram dimensions from front to back 750 mm
Die holder from front to back 1000 mm
Min. die holder to ram distance 340 mm
Steam/air pressure 0.6-0.8 MPa
Dimensions 3400x1900x5450 mm
Mass (less anvil block) 25 tons
Mass of anvil block 63 tons
Strike energy: 40 kJ
Nominal weight of the falling parts: 1600 kg
Number of strokes per minute: 70 ± 10%
Distance between guides in daylight: 520 mm
Min. height of dies without shafts: 220 mm
Max. height of dies without shafts: 460 mm
Dimensions of die holder front-to-back: 620 mm
Diameter of cylinder: 350 mm
Diameter of rod: 125 mm
Weight of upper die:
-Min.: 85 kg
-Max.: 200 kg
Voltage: 360 V, 50 Hz
-Left-to-right: 3000 mm
-Front-to-back: 1600 mm
Falling parts weight, kg ..... 3150;
Impact energy, kilojoules ..... 80;
Max ram stroke, mm .....1250;
Distance between columns, mm ..... 4000;
Working area height, mm ..... 630;
Impact frequency, min-1 ………………….. 56;
Ram dimensions, mm ..... 600*340;
Air consumption, m3/min ………… …. 32,6;
Hammer dimensions, mm:
- length ……………………………..... 6450;
- width ………………………………….. 2750;
- height …………………………... more
Weight of impact (Nominal weight of falling parts) kg 3150
Energy of impact kj 80
The greatest number of impacts it is brisk in a minute 56
Distance between racks in light mm 2800
Height working area mm 630
The sizes of a mirror it is brisk 600 ? 340
Distance from a mirror bottom it is brisk up to a level of a floor mm 750
Pressure of air before an intake 6-8
Machine overall dimensions: mm
- length 5000
- width 2500
- height 4500
Weight of an anvil-block kg 41 250
Weight of a hammer... more
available inspection in work.
Any broken or damage.
Impact energy, kj 50
Nominal mass of drop parts, kg 2000
Max. number of blows per minute 56
Distance clear between columns, mm 2360
Working zone daylight, mm 530
Bottom die impression-to-floor distance, mm 750
Die impression size, mm 530 x 300
Weight of the hammer without anvil block, kg 20100
Anvil block weight, kg 30000 more
Air hammer, air forging hammer, forging hammer, air forging hammer, forging forging hammer impact energy 745 mkp bear hub mmg 135 300 mm stroke / min-Amboss 270 x 90 foot switch motor 30 kW 1470 RPM lubrication machine dimensions 2300/1300/H2800-Amboss 690/1750/H1400 dimensions mm 1 x Euro pallet weight ca. 11,000 kg
Nominal mass of drop parts kg 5000
Rated striking energy 125 KJ
Max. no. of blows/min. 50
Ram stroke 1300 mm
Uprights distance 800 mm
Ram dimensions front to back 950 mm
Die holder dimensions front to back 1180 mm
Bottom die impression to floor distance 700 mm
Min. die holder to ram distance 400 mm
Steam/air pressure 0.7-0.9 MPa
- Floor space: 3700x2000 mm.
- Height above floor level: 6470 mm
Mass (less anvil block) 40 tons
Mass of anvil block 99 tons
Elect./Voltage: 240 or 480 V, 60 Cy, 3 Ph
JB SEDBERRY 3600 Hammer [...] machine was manufactured by Jee-Bee Mfg, Inc. It is a medium size mill. Now processing: Wood, Vinyl and medium to hard materials. This machine was simi reconditioned June 2015. Now has 500 Hrs since. -- Expect 1-1/2 to 2 tons per Hr with 3/4 to 1" screens somewhat more with larger [...]: -- Comes with 100 HP motor, Replaced also June 2015. -- Opening 20" X 20" Discharge" 23" W 4" tall. -- 48- 3/8"W Flying ... more
On behalf of our customer, we offer the following facility, we point out that the owner of the facility directly reports to you and they thus have a direct contact for the processing.
We do NOT incur any costs for you
Woodchip - Wet hammer mill
Manufacturer: GT Zesor
Type: USZ 78-750 / 1000
Year of construction 2007
Output 110 kW
Power 4000 Kg / h atro chips
Consists of :
Heavy material separator
Incl. Magnetic case
Filter area 127 m² more
Operation mode: continuous operation
Type of power: Three-phase
Frequency: 50 Hz
Power consumption: 6,5 kW
Mains voltage: 3 pH 400 V
Power consumption: 13.3 A
Filter surface: 22.4 m2
Dimensions l x w x h: 2.318 x 994 x 2,346
Weight: 480 kg
Flow rate: 4,900 m3/h
Related vacuum: 2,750 PA
Minimum flow rate: 3.532 m3/h
related vacuum: 3,800 PA
Compressed air connection of min. 6.0 bar, maximum 8.5 bar
Sound pressure level: Com. n. EN ISO 3744 74 dB(A)
Measurement uncertaint... more
Pneumatic forging hammer
anvil dimensions: 600 x 600 x 500 mm
Stroke: 1200 mm
Between columns: 3290 mm
Total dimensions: 6000 x 2000 x 5000 mm
Accessories and spare parts included: spare anvil, bending die,...
Optional: Dango amp; Dienenthal forging manipulator 1 ton - click here
Schmiedehammer / BrÃ¼ckenhammer more
Elect./Voltage: 460 V, 60 Cy, 3 Ph.
BLISS Model EMFD 4840-TFA “Eliminator” Hammer Mill with a 48″ diameter x 40″ wide Rotor complete with the following major components and features: -- Modern Teardrop shaped, Full-circle arrangement, Grinding Chamber with integrated Screen Carriage. -- Sliding access Door on both sides of the machine. -- Mounted on a factory Steel Base with bottom material discharge Plenum. -- 300 HP, 1,800 RPM Main Drive Motor. -- Fitte... more
Dimensions (l x w x h) approx.: 1500 x 800 x 1800 mm
Weight approx.: 800 kg
Description: Power 5.4 kW, refrigerant R 407 C, quantity 4.46 kg
In Online Auction with approx. 312 further Machine Tools and other Assets!
Bidding ends: Thursday, 01 June 2017 from 9am (local time)
Auction start price: EUR 300 (plus VAT and 15% buyers premium)
Your contact person: Alessandro Icardi more
Technical details of delivery pressure: 10 bar liter power: 3 000 l volume flow: 4.05 m ³/min operating hours: 34940 h total power requirement: 30 kw machine weight approx.: 0.67 t space approx.: 2, 2 x 0, 9 x 1, 65 m
- Producer Hackemack
- Type KTR 2540
- Working width 1300 mm
- Length only drying tunnel 13.000 mm
- Slot jet nozzle system
- Number of adjustable temperature zone 1 Stk.
- Number of heater (boiler) units 1 Stk.
- Fresh air min. 2.500 m³/h
- Heat output 116 kW
- Drying temperature 80 Grad
- Incl. heat exchanger PHW 120 / 100
- Exhaust pipe 350 mm
- Transport belttransport 20.000 mm
- Producer conveyor Hackemack
- Feed speed infinitely adjustable ~ 20 - 30 ... more
Anchor - anchor, air layer anchor 4 mm anchor length 210 mm incl. Plugs 8 mm -250 pieces per package Officially approved cavity wall tie according to DIN 1053 - (Material No. 1.4571/1.4401) plugs: (Ultramid B3S) -64 packages available price per Package Weight 6.5 kg / piece
Elect./Voltage: 220 V, 60 Cy, 1 Ph.
LAGUNA BANDIT HOT AIR EDGEBANDER0.4 - 1.5 mm Edge thickness cap. w/automatic cutoff up to 0.8 mm (1/32") only; for pre-glued edgebanding, automatic coil feed magazine, manual single feed for strips, min. panel width 50 mm, panel thickness 10 - 50 mm; LEISTER hot air blower (3.0 kW) for reactivating of adhesive, powered belt type holddown over feed thru table, feed speed 20 FPM. Front & rear end trim guillotine knives, top & bottom high speed (10,00... more
Dimensions (l x w x h) approx.: 700 x 700 x 1500 mm
Weight approx.: 80 kg
Description: Pressure max. 18 Bar, endowed with 2 filters, see photos.
In Online Auction with approx. 461 further Machine Tools and other Assets!
Bidding ends: Tuesday, 20 June 2017 from 9am (local time)
Auction start price: EUR 290 (plus VAT and 15% buyers premium)
Your contact person: Simone Clini more
gebr. UP welder make AIR LIQUIDE
Model Starmatic 1003 DC REF.-No.: W000315019
. - No. 267608-332 built 2012
Welding current 200-1000 A
Power consumption 100% 100a
Power consumption 100% 65.8 kVA
Power supply 400 V
Hose length approx. 18 m
Welder Air Liquide Subarc 3 C.
REF.-No.: 91096890,. No.: 00361202063, built in 2012.
with welded fitting, ref.-No.: 91096172
Welding cart Air Liquide Megatrac, built in 2011.
. No.: 00361128253
Flux recovery unit, ref.-No. 91... more
Elect./Voltage: 460 V, 60 Cy, 3 Ph.
JACOBSON Model P-241D, full circle Hammer Mill complete with 100 HP Motor. -- Teardrop Screen design, -- Hinged Door, -- Top feed, Bottom Discharge. -- This reconditioned unit includes a control panel. -- 100 Spare Hammers. -- Option: Soft Start Motor Starter - add $1,000. more
Dimensions (l x w x h) approx.: 1200 x 800 x 740 mm
Weight approx.: 120 kg
Description: 1.5 kW, 2850 rpm, rotary plate diameter 700 mm, saw blade diameter 230 mm, footswitch, see photos for details
In Online Auction with approx. 74 further Machine Tools and other Assets!
Bidding ends: Tuesday, 06 June 2017 from 10am (local time)
Auction start price: EUR 100 (plus VAT and 15% buyers premium)
Your contact person: Marc Nepsen more
Tank volume: 2000 l
Test pressure: 16 bar
Operating pressure of 0-11 bar
The tank has been used since 2007 to operate an oil mill.
Device has been serviced regularly through a maintenance contract.
Elect./Voltage: 220/440 V, 60 Cy, 3 Ph.
Used GRUENDLER Model 24-3, Heavy-Duty, Horizontal feed, Hammer Hog with 3" x 17 1/2" infeed opening. -- GE 75 HP 220/440 volt, 1775 RPM main motor -- Direct Drive, 3/4" HP infeed motor for feed wheel -- Hammers are 1 1/2" wide, Rotor is 24" wide. more
Weight approx.: 6000 kg
Dimensions (l x w x h) approx.: 3000 x 1500 x 620 mm
Description: table length 3000 mm table width 1500 mm table height 620 mm distance of T-slot from edge 100 mm number of T-slots 8
In Online Auction with approx. 90 further Machine Tools and other Assets!
Bidding ends: Friday, 09 June 2017 from 10am (local time)
Auction start price: EUR 6.900 (plus VAT and 15% buyers premium)
Your contact person: Siegfried Bernatzki more
about 8,000 pieces, high quality moisture-proof luminaire or lamp with bulb, 2 x 49W. -used, almost new -:
Price up to 100 pieces: 20.-€ (net)
Price from 250 units: €18 (net)
Price from 500 units: €16 (net)
Price from 1,000 units: CHF 15.-€ (net) = only 12.5% of the new price!
Minimum order quantity: 20 pieces
Manufacturer: Beghelli type: moisture-proof luminaire PS110 T5 RE 249
2 x T5 deep / wide beam
Lights were in use for only about 6 months!
Condition: g... more
All information, offers and prices on this site are subject to change and non-binding!
By using this website, you acknowledge and agree to our Terms & Conditions and Privacy Statement.
All brand names are the property of their respective owners. Thorsten Muschler GmbH
does not accept any liability for the content of linked websites.