Used Air Inlet Ceiling for sale (27,925)

Condition: ready for operation (used), Year of construction: 1995, Schuko spray booth wall with supply air unit + supply air ceiling Offered at a special price, but must be dismantled by the buyer Technical data: see photos Chsdpjxvivqsfx Aqved Location: ex-site Saarland

Condition: good (used), Year of construction: 2024, Refrigerant dryer, OMEGA AIR, RDP 75 – used: Price ex works: €750.00 (net)! Manufacturer: OMEGA AIR Type: RDP 75 Year of manufacture: 2024 Nominal flow rate: 75 m³/h Max. operating pressure: 16 bar Ambient temperature during operation: 1 °C to 45 °C Max. air inlet temperature: 55 °C Ph~V-Hz: 1~230-50/230-60 | 0.40 kW Protection class: IP20 Contains fluorinated greenhouse gases Refrigerant: R513a | 0.39 kg | CO₂ equivalent 0.22 t Operating hours: unknown Condition: good Chsdpfszbydwex Aqvod Available: from approximately August 2026

Condition: used, Year of construction: 2016, Two used, air-cooled compressed air refrigeration dryers in good external condition, with inspection labels valid until 2025. Manufacturer: Ingersoll Rand Model: D1890EC-A Series: D-EC Premium Efficiency Machine type: Compressed air refrigeration dryer Year of manufacture: 2016 / 2017 Air flow rate: 31,500 l/min (1,890 m³/h) Electrical power: 6.79 kW Voltage supply: 400 V / 3 phases / 50 Hz Refrigerant: R407C Refrigerant charge: 4.2 kg Maximum air inlet pressure: 13 bar Maximum refrigerant pressure LP/HP: 18 / 29 bar Air inlet temperature: +5 to +60 °C Ambient temperature: +2 to +45 °C Sound pressure level: 78 dB(A) Connection size: 3 inches Control: Electronic control with digital display Cooling: Air-cooled Chedpfx Aqe Ahyn Djvod Condition: Used, good external condition Inspection: Inspection labels valid until 2025 are available Available quantity: 2 Location: Rehweiler

Year of construction: 2014, condition: good (used), power: 260 kW (353.50 HP), color: yellow, machine/vehicle number: 214034, Painting-drying booth with semi-vertical air flow "ITALO-1-SV", brand Lackro, manufacturer Eco-Air Technology S.R.L. Italia, year of manufacture: 2014 Cjdpfxsp S Tlhe Aqvjhd Cabin interior dimensions: length 14.06 m X width 5.04 m X height 4 m, maximum air flow: 40-45000 mc/h, thermal power: 260 Kw, fuel: diesel, installed electric power: 26 Kw three-phase, tank fuel included, the cabin has a special lighting system, 30 superior filter cells for purification with carbon, dimensions: 500x500x50 mm, side service door, two central hinged doors, trolley for parts, burner chimney on diesel, the cabin has the user and maintenance manual Attention customers: this cabin will be delivered disassembled and loaded for transport from our company headquarters in Oradea. Industrial drying painting cabin "ITALO-I-SV" MOD. ECO – L=14,060 mm x w=5,040 mm x H=4,000 mm with semi-vertical air flow Suction group Suction and filtration unit ECO-SM-5 Maximum air flow at 250 Pa m3/h 40,000-45,000 Maximum thermal power kW 260 VATRA 232 Fuel type DIESEL Installed three-phase electric power: kW (2x7.5) +(2x5.5) Filter cells 500 mm x 500 mm x 500 mm 30 pieces Bag filter Ǿ 280 x 1000 mm pieces 10 Ceiling grid 975 x 1855 mm 28 pieces Generator pre filters 1,000 mm x 800 mm x 50 mm pieces 2 Andreae suction wall filter 0.9 m x 5 m pieces 3 The maximum size of the piece in the cabin L=12 m x w=3 m x H= 3.2 m For any details, do not hesitate to contact me by phone. Price 79.900 Euro + VAT, Ex Works Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: used, Year of construction: 2006, FIAC CRS20 Soundproof Screw Compressor – Year 2006 Complete with a 500-litre air receiver and FIAC DS20/AC refrigerated air dryer, ideal for ensuring a continuous supply of compressed air with low noise levels. Technical Specifications Air delivery (F.A.D.): 1,860 l/min Maximum pressure: 10 bar Power consumption: 17.6 kW Motor power: 20 HP Air receiver capacity: 500 litres Weight: 461 kg Chjdpfx Aqozq Amrsved Availability: Delivery scheduled for September 2026.

Condition: good (used), total length: 6,060 mm, total width: 2,440 mm, total height: 2,590 mm, 20FT ISO CRYOGENIC TANK CONTAINER Manufacturer: Air Liquide Italia S.r.l. ISO 6346 Code: 22KW IMO Portable Tank IMO Type 7 Transport instructions: T75 ADR RID Tank Code: R11.7BN Codpfxezd Saus Aqvshd ISO 6346 Code: 22KW Max. working pressure: 8 bar Hydr. test pressure: 11.7 bar Design Temp.: min -196 º C Material (Inner & Outer Vessel): High-grade Stainless Steel (X5CrNiN1810 UNI 7500) Insulation: Vacuum Double Envelope (Excellent current vacuum: 0.052 mbar) Safety Valves: 2x Herose Relief Valves (Set at 8 Bar) (p. 1) Vaporizers: Included & complete with piping Last Inspection: June 9, 2026 (5-Year Periodic Inspection by Bureau Veritas) Next Inspection Due: 12-2028 CSC Validity: Until 12-2028 (p. 1) Approval/Regulations: IMDG, ADR, RID, CSC, US DOT (p. 1) = Additional Information = General Information Year of Construction: July 2000 Year of Design: 2000 Model Year: 2000 Usable Material: Gas Weights Empty Weight: 8,300 kg Payload: 25,700 kg GVW: 34,000 kg Condition Technical Condition: good Optical Condition: good Additional Information Please contact Arne Honingh for further information.

Condition: excellent (used), Year of construction: 2019, overall weight: 500 kg, total length: 2,000 mm, total width: 1,600 mm, total height: 2,200 mm, Load capacity: 2,200 kg Table – Ø: 1,525 mm Band width: max. 150 mm Band thickness: max. 1.27 mm Stack height: max. 760 mm Speed: max. 10 RPM, continuously adjustable Design: o Frame in a robust welded construction Chedpfx Aqszvqzzsvsd o Loop control via a joystick with a roller o Speed can be pre-selected via a display o Right/left rotation o Fixture for inner diameter

Condition: used, color: other, Year of construction: 2017 Dimensions (LxBxH): 700 x 350 x 1850 cm Dimensions LxWxH: 7000x3500x18500mm AIR JET Industrial Dust Extraction & Bag Filtration System – 60,000 m³/h – Circa 2017 Key features: • Year: circa 2017, based on the technical documentation; exact manufacturing year to be confirmed from the nameplate. • Main filter: 806.4 m² filtration area with 448 bags; specified operating temperature of 100°C. • Secondary filter: 181 m² filtration area with 121 bags; specified operating temperature of 20°C. • Automatic compressed-air pulse-jet cleaning on both filters. • Teflon-treated filter media, as specified in the technical documentation. • Main filter features an AISI 304 stainless-steel clean-air chamber and tube sheet. • Steep 70° collection hoppers to assist dust discharge. • Technical and maintenance documentation available. A substantial industrial filtration installation offering two separate filtration capacities for process exhaust and dust extraction applications. *The factory is still in production, with operations due to cease shortly. The site will be cleaned before collections begin. Online auction of detergent processing equipment, soap and powder manufacturing (e.g. SAGAFLUID mixer, AIRJET bag filters, paddle mixers, SIEMENS Milltronics weighing, VEGA level measuring etc.), many s/s storage tanks 5x 100m3, 3x 75m3 etc., workshop and spare parts, logistics, laboratory and offices due to partial relocation and plant closure of the renowned Lagarto Euroquimica at Zaragoza in Spain. The online auction opens Tuesday 3 November and closes Tuesday 24 November. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Cjdpfx Aqe Ahyh Novjhd Viewing days are on: - Tuesday 10 November - Monday 23 November Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: excellent (used), Year of construction: 2025, functionality: fully functional, COMPLETE PACKAGE: Mobile, transportable compressed air supply station – the entire system is installed in a red steel container (10 ft) and can be transported as a single unit using a crane. Simply connect the three-phase power supply and compressed air line – and it’s ready to go. The interior features a HIGH-QUALITY INDUSTRIAL SYSTEM manufactured in 2025: - SCC screw compressor with frequency inverter (speed-controlled, energy-efficient) - 2000-liter pressure vessel VIG (stands upright, protrudes through the container roof with a weather protection cover) - Complete control system with touch panel and emergency stop button on the outside - Acoustic sound insulation (black foam mats inside) - Permanently installed electric heater in the container (frost protection for year-round operation) - Hose material and compressed air connections for consumers - Crane lifting points on the container roof - Control panel with touch display, emergency stop, status LEDs Originally from the shipyard operations of Strela Shiprepair GmbH. System freshly painted, clean, and ready for use. Assumption of the maintenance contract with Schulze is possible. TECHNICAL DATA: SCREW COMPRESSOR: Cedpfxjzav Ddo Aqvshd - Manufacturer: SCC Air Compressors - Control: SCC frequency inverter (speed-controlled) - Type: Screw compressor, stationary in the container - Year of manufacture: 2025, commissioning date: 23.05.2025 - Operating time: approx. 1 year in shipyard operations PRESSURE VESSEL: - Manufacturer: VIG GmbH, Kreuztal - Volume: 2,000 liters - Max. pressure: 11 bar - Test pressure: 15.73 bar - Temperature: -10°C to +50°C - Standard: AD 2000, test mark 1003 - Factory No.: 124585, year of manufacture 2025 CONTAINER: - 10-foot steel container, soundproofed, painted red - External dimensions: approx. 2,991 x 2,438 x 2,591 mm - Crane lifting points on the roof (photo attached showing the shipyard crane) - Three-phase power connection 400 V CEE IDEAL FOR: - Shipyards and shipbuilding companies (mobile compressed air supply for ships) - Sandblasting service providers (mobile complete solution) - Industrial companies with changing locations - Automotive/body shops with an external location - Construction companies, scaffolding companies PICKUP: Loading with the shipyard crane directly on-site (container has lifting points on the roof). Transport by low-bed trailer via a forwarding agency. Inspection appointments are available at any time – we will then show you the complete documentation and demonstrate the system in operation.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, Equipment: documentation/manual, refrigerant dryer, type plate available, Container includes the following contents: - 10ft storage container, new / Color: Anthracite grey - SSC-Strong 37 Vario • Speed-controlled screw compressor • Free air delivery at 8 bar: 6.3 m³/min • Dimensions (LxWxH): 1432 x 1000 x 1480 mm • Weight: 705 kg - 2 compressed air tanks, 500 l each o With AD2000 certification o Horizontal design - 2 Ecomat 31 condensate drains - 2 sets of fittings - SCC refrigerant dryer DRA480 Chodpfoxc T Evox Aqvjd o ISO 8573-1 Class 4 o Refrigerant: R407C o Capacity: 480 m³ - Pre-filter FIL934-P - Fine filter FIL934-M The compressor has seen very little use and therefore has low operating hours. Upon request, we can read the operating hours and run the compressor for demonstration.

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 520 kg, total length: 2,000 mm, total width: 800 mm, total height: 1,800 mm, space requirement height: 1,800 mm, fuel type: electric, volume flow: 90 m³/h, operating pressure: 10 bar, pressure (max.): 10 bar, noise level: 65 dB, protection type (IP code): IP23, type of cooling: air, Equipment: refrigerant dryer, VIBER-AIR INV11-500 – 11 kW SCREW COMPRESSOR WITH INVERTER, DRYER, AND 500 L TANK NEW MACHINE – IN STOCK – READY FOR DELIVERY Chsdpsz I Adiefx Aqvod VIBER-AIR INV11-500, a professional screw compressor, is a complete solution for compressed air production in workshops, carpentry shops, production departments, and industrial applications. The compressor is equipped with an inverter, an integrated refrigeration dryer, and a 500-liter tank. The inverter allows the compressor’s operation to be adjusted to the actual air demand, improving efficiency during uses with variable consumption. MAIN FEATURES - Motor power: 11 kW - Maximum pressure: 10 bar - Delivered air flow: 1,500 l/min – 90 m³/h - Air tank: 500 liters - Inverter - Integrated LR10 refrigeration dryer - Power supply: 400 V / 50 Hz - Direct drive - BAOSI screw unit - Noise level: 65 dB(A) - Air connection: G 3/4" - Control display - Protection: IP23

Condition: used, Year of construction: 2013, The industrial filtration system is used for suction and filtration of oil mist, emulsion mist and suspended solids from the air, as they arise during metal processing. The multistage filter system cleans the intake air and contributes to the improvement of air quality in the workplace. Mains connection: 400 V Frequencies: 50 - 60 Hz power consumption: 1.5 A at 60 Hz engine power: 1,15 kW Chodsz Szaljpfx Aqvod

Condition: like new (used), functionality: fully functional, total width: 15,000 mm, total length: 240,000 mm, total height: 9,000 mm, Model: Saxon 5 Cjdpfx Aoz H T Dweqvohd Manufacturer: Fischbein Machine type: Continuous hot‑air bag sealer Power: 220V single‑phase, 66 A Typical use: Sealing pillow‑style heat‑sealable plastic bags in fast‑paced production lines

Condition: like new (used), Year of construction: 2013, Manufacturer: Kaeser Kompressoren, Germany YOM 2013 Maximum Pressure: Up to 13 Bar Productivity 8.26 cubic meters/min Energy Efficiency: The direct drive coupled with IE4 efficiency motors (or IE5 on SFC models) ensures superior energy efficiency. Low Maintenance: Components are designed for long service life, with easy access for maintenance. SIGMA Control 2: Ensures efficient monitoring and control of the compressor. Rotary compressor type Screw by lubrication Oil Noise level 70 dB Height 1900 mm Length 1110 mm Width 1760 mm Weight 1250 kg Electrical parameters Mains voltage 380~400 V Power consumption 45 W Current frequency 50 Hz User characteristics Compressor cooling system Water cooling is possible, with subsequent use of heat. Chsdjyy U Shepfx Aqved Complete system ready to use fully automatic extremely effective sound insulation vibration insulation powder-coated housing parts for ambient temperatures up to +45°C easy maintenance: lubrication nipples for motor bearings are located on the outside (also for fan motor).

Condition: excellent (used), Year of construction: 1996, Compair Cyclon 6000N screw compressor 75kw power: 75 Kw Chsdpfxsh Unhne Aqved air transport : 12.9 /min :774 m3/h pressure: 8 bars voltage: 400v 50Hz 3 phase Construction of year: 1996 hours:51000h weight: 1800 kg Size: length: 2100mm width: 1700mm Height: 1510mm If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Condition: good (used), Year of construction: 2015, Atlas Copco Oil Free Screw Compressor with built-in Air Dryer Model SF2+FF 7.75 bar / 112 PSI Year 2015 400 volts three phase, 2.2 KW / 3 HP, 2885 RPM 8.9 CFM / 4.21 lts/s Very little use Chsdpfsy Iplfjx Aqvjd Ex Pharma Facility

Condition: good (used), Year of construction: 2008, Offer 26289 Approximate technical specifications: - CNC flame cutting machine with 2 torches, as shown in the picture - 2 torches with adjustable height and inclination - Track gauge approx. 4.2 m - Track length approx. 7.5 m Chedpfx Aozvnb Seqvsd - Track height approx. 0.5 m - Supporting table - Space requirement approx. L 8 x W 7.5 x H 2.3 m - Weight approx. 3 tons - Without supporting table!

Condition: used, Year of construction: 1991, Technical details: feed pressure: 10 bar volume capacity: 4,05 m³/min liter capacity: 4050 l/min Number of working hours: 16160 h total power requirement: 30 kw weight of the machine ca.: 0,67 t space requirements of the machine approx.: 2,2x0,9x1,65 m compressor: ECOAIR Type 4050.6210.2 operational pressure 15bar Cjdpfeu Nz Dnex Aqvohd *

Condition: used, Used hydrogen plant designed to produce high purity hydrogen and carbon monoxide from natural gas. Built by Air Liquide and first operated in 2015, shut down in August 2024. Output capacity as follows: - Hydrogen 60000 Nm3/hour with 99.99% purity. - Carbon monoxide 14500 Nm3/hour with approximately 99% purity. (Actual purity depends on volume of nitrogen in the natural gas feedstock.) - Superheated 40 bar steam by-product. The HyCO plant includes the following (5) main sections: - Syngas generation / steam reforming and steam generation - Gas cooling - CO2 removal unit / CO2 scrubbing - Gas drying and cryogenic dismantling - Pressure swing adsorption (PSA) Also included: sub-systems for provision of operating resources, flare system, process control and safety shutdown system. Chsdpfx Aqoy Ryrbevjd

Condition: used, Freshline freezer MP Type IQF 1220.15/3070 suitable for nitrogen all stainless steel product height: max. ± 100 mm capacity: ± 5.000 kg / h product load (kg/running meter): ± 13-14 kg / running meter 400/460V, 50/60Hz, 3PH+PE, 110A, 32kW Pneumatic: 1Nm3/h at 5-7barg Chjdpfe Ahw Hwex Aqvod LIN pressure nitrogen 3barg net belt width ± 1.220 mm net belt length ± 16.800 mm dimensions (l x w x h) : ± 17.700 x 2.600 x 2.600 mm (max open) in very good condition

Year of construction: 2001, condition: used, Compressor, compressed air unit, piston compressor, quiet running compressor, compressor for dentistry, quiet running compressor Cjdpeu Huvfefx Aqvehd -Manufacturer: Jun-Air, quiet compressor type OF301 -Motor power: 250 W -max. pressure: 8 bar -Number: 2x compressor available -Price: per piece -Dimensions: 220/160/H230 mm -Weight: 9.2 kg/piece

Year of construction: 2020, condition: excellent (used), Weber Legi-Air 4050E CC (Gen.3) – automatic print and apply labeling system with support frame For sale: Weber Legi-Air 4050E CC (Gen.3) – a professional industrial print and apply labeling system designed for automatic product labeling in production lines. Manufactured by Weber Marking Systems, this unit is designed for continuous operation in demanding industrial environments. The machine provides highly precise and efficient label printing and application, making it ideal for packaging and product identification processes. Technical data: Manufacturer: Weber Marking Systems GmbH Model: Legi-Air 4050E CC (Gen.3) Year of manufacture: 2020 Print resolution: 203 / 300 / 600 dpi Maximum print speed: up to 400 mm/s Capacity: up to 240 labels/min Application accuracy: ±0.8 mm Minimum label size: 10 x 5 mm Maximum label size: 160 x 350 mm Maximum applicator arm reach: 400 mm Power supply: 100–240 V AC / 50–60 Hz Power consumption: 700 W Operating pressure: 6 bar Air consumption: 0.1 – 3 l / cycle Additional information: sturdy support frame included, height adjustment on the legs and on the support column, maximum labeling head height on the support frame: approx. 140 cm from the floor, can operate in four directions: left / right / up / down. Cedpsy Ickbefx Aqvjhd TAG: industrial labeler, labeling system, label printer, print and apply system, Weber Legi-Air, Weber Marking Systems, Avery Dennison labeler, Zebra label printer, Sato labeling machine, Novexx labeling system, Videojet label applicator, Domino print and apply, automatic label applicator, carton labeling machine, production line labeler, industrial labeling machine, packaging label applicator, automatic print and apply, product labeling system, industrial label applicator

Year of construction: 2017, condition: ready for operation (used), A foam bag system for packaging smaller and individually manufactured parts is available. Packaging capacity: 16 bags/min, film type: perforated, bag dimensions 1 X/Y: 470mm/400mm, bag dimensions 2 X/Y: 470mm/600mm. Machine dimensions X/Y/Z: approx. 500mm/500mm/700mm, weight: approx. 30kg, control: Instapak 901. Includes two component filler, spare parts, and foil bags. Documentation vorhanden. An on-site inspection is possible. Chodpfxex A Hg Hs Aqvjd

Condition: good (used), Polar Mohr RA-4 Jogger with Air-Removal Roller Machine in very good condition, ready for operation. This is the latest design from the German manufacturer. Technical specifications: Max. format: B1+ Pile height: 150 mm Weight: 550 kg Power supply: 400 V Air-removal roller with an additional reinforced pressure system (using 3 pneumatic cylinders) Air table Jogging capability (left/right) Adjustable tilt angle Adjustable jogging frequency (via frequency inverter) Adjustable pressure and speed for the air-removal roller Chrome-plated table surface Cedpfxjz S Up Ho Aqvohd

Year of construction: 2018, condition: ready for operation (used), Comp Air screw compressor incl. refrigeration dryer Comp Air screw compressor L 06 5.5 kW Year of manufacture: 2018 10 bar Delivery rate: 0.67 m³/h Refrigeration dryer PT 9 Csdpjy Amknsfx Aqvehd