Used Alignment Tip for sale (6,019)

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 17405, travel distance X-axis: 550 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 10,000 kg, spindle speed (max.): 15,000 rpm, number of slots in tool magazine: 240, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range, X-axis: 550 mm Travel range, Y-axis: 410 mm Travel range, Z-axis: 450 mm Travel range, B-axis: -110 to +110° Travel range, C-axis: 360° Distance, pallet surface to spindle center line: -20 to 430 mm Distance, B-axis center to spindle center line: -40 to 410 mm Distance, B-axis center to spindle center line: -20 mm Distance, pallet center to Z zero point: 265 mm Distance, pallet center to Y zero point: 180 mm Pallet Work area on the pallet: Ø 130 mm Pallet load capacity: 40 kg Max. workpiece size: Ø 250 × 250 mm Pallet mounting surface: 4 × M12 × 1.75 Distance, pallet bottom to pallet surface: 970 mm Pallet indexing, B/C-axis: 0.001° / 0.001° Pallet change time, B-axis: 1.2 s/90° Pallet change time, C-axis: 0.9 s/90° Pallet change time, C-axis: 1.2 s/180° Pallet change time, C-axis: 1.4 s/270° Pallet torque, B-axis: 1,070 Nm Pallet torque, C-axis: 192 Nm Pallet braking torque, B-axis: 1,112 Nm Pallet braking torque, C-axis: 500 Nm Spindle Spindle speed: 50 to 15,000 rpm Spindle speed change: 5-digit direct S-command Tool holder: SK 40 Spindle taper: 7/24, taper No. 40 Inner diameter of spindle bearing: 70 mm Max. spindle torque: 65.1 Nm at 1,100 min⁻¹ Spindle air blow: Standard Spindle alignment: Standard Tool clamping force: 7.0 kN Tool changer Tool magazine capacity: 240 positions Tool shank: JIS B 6339, tool shank 40T Pull stud type: JIS B 6339, pull stud 40P Max. tool diameter: 80 mm Max. tool diameter with free secondary stations: 150 mm Max. tool length: 300 mm Max. tool weight: 10 kg Tool selection: Fixed address system Tool change arm: W-gripper type Feed rates Rapid traverse, X/Y/Z-axis: 50 m/min Rapid traverse, B-axis: 30 min⁻¹ Rapid traverse, C-axis: 50 min⁻¹ Feed rate, X/Y/Z-axis: 1 to 50 m/min Feed rate, B-axis: 30 min⁻¹ Feed rate, C-axis: 50 min⁻¹ Lrjdpfx Aez D Taaefuet Rapid traverse acceleration, X/Y/Z-axis: 0.6 G Rapid traverse acceleration, B/C-axis: 2,500 / 2,000 °/s² Max. acceleration during cutting feed, X/Y/Z-axis: 0.4 G Max. acceleration during cutting feed, B/C-axis: 2,000 / 4,000 °/s² Dwell feed rate, X/Y/Z-axis: 0 to 4000 mm/min Dwell feed rate, B/C-axis: 0 to 11.11 min⁻¹ Min. motion increment, X/Y/Z-axis: 0.001 mm Min. motion increment, B/C-axis: 0.001° MACHINE DETAILS Control: MATSUURA G-TECH 840 DI Serial number: 350536 Electrical connection values Rated apparent power: 36 kVA Input voltage: 415 V Input frequency: 50 Hz Input current: 50 A Dimensions and weight Overall length: 6,000 mm Overall width: 5,000 mm Overall height: 3,500 mm Overall weight: 15,000 kg EQUIPMENT Chip conveyor Coolant system Tool holders in the tool changer External reference: Hanon - Lot 1

Condition: used, Year of construction: 2007, operating hours: 7,944 h, 2007 | Genie Z-135 | Used Articulated Boom Lift | 7944 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 32600 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 50 inspection points 42 approved ✅ 7 imperfect ℹ️ 1 issues ⚠️ 📌 Inspector's Comment: The machine has a working height of 43.15 m. The secondary lifting cylinder has a leak. The wheel alignment is incorrect. The axles require adjustment. The synchronization of the right rear wheel during steering is faulty. There is play at the level of the orientation turret and the boom pivot axes. The front tires show significant wear. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "41312 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform. Lsdpfxjz Dx Uvo Afuert

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,660 kg, maximum load weight: 33,340 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 10,450 mm, total width: 2,550 mm, total height: 1,325 mm, suspension: air, tire size: 385/55 R22.5", tire condition: 100 %, Year of construction: 2026, Tailor-made transport solution Configure your Fliegl vehicle to your requirements. The vehicle shown is an example. Production and specification are carried out individually to customer requirements. #Chassis, semi-trailer container - Fine-grain steel welded construction, fifth wheel plate with replaceable 2" kingpin and 2 kingpin positions - Front locking on tipping ram mounting bracket with guide wedges on both sides, rear locking on continuous twist-lock shaft with return spring - Without subframe, for self-supporting containers - Container mounts: locking crossmember, twin-point for locking 1 x 30 ft container - 24 t 2-speed landing legs, single-side operation, with straight foot, without slide compensation - Clear landing leg corner dimension / rear swivel clearance approx. 1850 mm - 2 wheel chocks with holder - Aluminium side underrun protection - without rear underrun protection - Half-shell mudguards - with anti-spray mudflaps to EC standard #Hydraulics - Low-pressure cylinder max. 170 bar, smallest stage hard chrome-plated, with HDK screw coupling, fixed part, NW 48 mm (without hose connection). Caution! Tipping angle limited! - Hydraulic actuation via truck PTO - Hydraulic connection with hose and HDK screw connector NW = 48 mm with knurled nut #Axles + Suspension - BPW disc brake axles with 430 mm disc diameter - "Laser-aligned axles/chassis", reducing tyre wear and fuel consumption - Staggered axle spacing 1410/1310 mm (combined transport) up to 44 t gross train weight - Air suspension - 1st axle automatic lift axle, including forced lowering and traction assist, activated by "3x braking" (traction assist functions up to an axle load excess of 30% and up to a speed of max. 25 km/h) #Braking system - Two-line compressed-air braking system Lrjdpfezy N Hkex Afust - Colour-coded line routing for easy servicing. - Spring-loaded parking brake - 2 mismatch-proof coupling heads at the front, without connecting line - 24 V EBS electronic braking system with EBS socket at the front, without connecting cable - Caution: the trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! - with raise & lower valve - Vehicle driving stability system - Axle load detection via EBS CAN bus signal, for display on the cab monitor; the truck must be pre-fitted accordingly, no installation on the truck included (not a calibrated weighing system) #Wheels and tyres - 385/55 R22.5" make at the manufacturer's discretion - Steel rims, factory silver #Electrics - 24 V multi-chamber lights, yellow LED side lighting - 2 white LED position lights at the front - 2 white/red outline marker lights at the rear - 2 x 7-pin mismatch-proof sockets at the front, without connecting cable #Country of registration / Plates - Type approval to EC 2007/46 - 24/7 service hotline - prepared for single-line number plate holder - Contour marking with reflective strips to ECE R048, white on the sides and red at the rear #Paintwork - Frame: RAL colour of choice - "10-year warranty against corrosion perforation" - Landing legs: black coated

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,650 kg, maximum load weight: 9,850 kg, overall weight: 13,500 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 450 mm, total length: 6,900 mm, total width: 2,550 mm, total height: 1,680 mm, suspension: steel, tire size: 285/70 R19,5", tire condition: 100 %, Year of construction: 2026, - Bespoke transport solution - Configure your Fliegl vehicle to your requirements. The vehicle shown is an example. Production and equipment are carried out individually to customer specification. #Chassis – centre-axle tipping trailer - Steel welded construction, continuous rear tipping shaft with 80 mm ball-type tipping bearing - Geared support leg at front - Foldable rear support - 2 wheel chocks with holder - Steel rear underrun protection - Mudflaps at rear, full width - Quarter-shell mudguards - Lockable storage compartment for loading ramps beneath the load bed - 1 plastic tool box with removable tray, w=620/h=360/d=440 mm, lockable with a padlock - Note: side board touches the storage box when folded down - Lockable storage compartment for loading ramps beneath the load bed - Drawgear for centre-axle trailer - Drawbar with approved 40 mm tow eye - Drawbar height-adjustable via spindle, max. adjustment range 300 mm #Axles & suspension - SAF drum brake axles Lrsdpfxozd D Scs Afuot - "Laser-aligned axles/running gear" – reduces tyre wear and fuel consumption - Parabolic suspension with maintenance-free rubber-steel bushings and mechanical axle-load equalisation (rocker equalisation) #Wheels & tyres - 285/70 R 19.5" - Manufacturer's choice - Steel rims, factory silver #Braking system - 2-line air braking system - Spring-loaded parking brake - 2 anti-mismatch coupling heads at front, with connecting lines to the towing vehicle - ABS and ALB, with ABS socket at front, with connecting cable - Caution: this trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! #Electrics - 24 V, multi-chamber lights, yellow LED lighting on the sides - 2 white position lights at front - 2 white/red outline marker lights at rear - 2 x 7-pin anti-mismatch plugs at front, with connecting cable #Hydraulics - Three-way tipping gear, hydraulic multi-stage telescopic ram with stroke limiter and safety cable - Low-pressure cylinder up to max. 170 bar, without restrictor valve; to be retrofitted on the truck if required - Hydraulically operated via the truck's PTO - Hydraulic connection with quick-release coupling, DN 10/3, incl. connecting hose #Tipping body - Sturdy tipping body with 4 mm steel sheet floor, steel side-board structure, continuous side walls, foldable and pivot-mounted with central locking at the bottom; rear corner posts, plug-in type; tailgate foldable and pivot-mounted, with central locking at the bottom - Platform length approx. 5,000 mm, side walls with 6 hinges at the bottom - Side-board return springs - Platform width 2,420 mm - 5 pairs of lashing eyes in the floor, 5 t each #Operating notes - The stated gross vehicle weight is technically achievable; depending on the load, it may not be reached while observing the permissible axle, support and fifth-wheel loads #Country of registration/plates - Country of registration: Germany - With DEKRA inspection and certificate (in accordance with §13 EG-FGV) - 24/7 service hotline - Prepared for single-line number plate holder - Contour marking with reflective strips to ECE R 048, white on the sides and red at the rear #Paintwork - Frame hot-dip galvanised incl. passivation - "15-year warranty against corrosion perforation" - Side boards/platform painted in colour of choice - Bespoke transport solution

Condition: used, Year of construction: 2009, functionality: fully functional, machine/vehicle number: 352 NC EVO, Semi-automatic circular saw for sawing aluminum and light metal alloys, using carbide-tipped circular saw blades. Includes dust extraction and material handling (roller conveyors). Ljdpfx Afev T U Tgsuort Machine for miter cuts from 45° right to 45° left. The vertical alignment allows for sawing operations with the head tilted between 0° and 45° left.

Condition: repair required (used), Year of construction: 2013, functionality: not functional, machine/vehicle number: AW016804, A-WARD UO20 CONTAINER TILTING SYSTEM, designed for the safe and efficient handling of 20-foot ISO containers in bulk material handling operations. The equipment allows for hydraulic tilting of the containers from 0° to 90°, facilitating the quick loading or unloading of bulk products such as scrap metal, minerals, grains, or other loose materials. • Type: container tilter with universal frame • Application: loading/unloading of 20-foot ISO containers • Tilting range: hydraulic tilting from 0° to 90° Lrjdpfx Afozbtu Aoust • Operation: self-contained hydraulic system with remote control • Status: available for sale • Condition: available for inspection The system improves safety, productivity, and loading efficiency by enabling controlled gravity-fed handling of bulk materials directly within the containers. Remarks: The unit is sold in its current condition. It is missing hydraulic hoses, and the weighing system is not operational.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,200 kg, maximum load weight: 16,800 kg, overall weight: 21,000 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 600 mm, total length: 7,200 mm, total width: 2,550 mm, total height: 1,800 mm, suspension: air, tire size: 435/50 R19,5", tire condition: 100 %, Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer requirements. Chassis, central axle, tipping trailer Steel welded construction, continuous tipping shaft at the rear with 100 mm ball bearing Type 210, then total weight technically 21,000 kg (special permit required) Gearbox support leg at the front Retractable rear support 2 chocks with holder Under-ride guard, steel Splash guards at the rear over the entire width (not in conjunction with forklift holder) Quarter panel fenders in front of and behind each axle 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable 1 pair of aluminum ramps, 3,440 mm long, 360 mm wide, load capacity per pair 8,000 kg (attachment rail for ramps at the rear) Coupling device for central axle trailer Lredpezd Eynefx Afuet Drawbar with tested 50 mm tow hitch Axles + suspension BPW disc brake axles "Axle/chassis laser-aligned" reduces tire wear and fuel consumption Axle spacing 1810 mm (then 10 tons axle load technically) Air suspension Braking system 2-line compressed air brake system Color-coded line routing for easy maintenance. Spring brake parking brake 2 fail-safe coupling heads at the front, with connecting lines to the tractor unit, 24 Volt EBS, electronic braking system with EBS connector at the front, with connection cable, Note: The trailer may only be towed by tractor units that guarantee the effectiveness of the ABS! with lift and lower valve Vehicle - driving stability system Axle load detection via EBS-CAN bus signal, for display on the display in the driver's cab, truck must be correspondingly pre-equipped, no truck installation (no calibrated scale) Wheels and tires 435/50 R19.5", manufacturer's choice Tires with 164 K or J marking, manufacturer's choice Steel rims, factory silver Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front in LED 2 white/red marker lights at the rear 2 x 7-pole fail-safe plugs at the front, with connection cable, 1 additional LED work light at the rear, switched via reversing light Hydraulics Three-way tipping mechanism, hydraulic multi-piston press with stroke limiter and safety cable, Low-pressure cylinder up to max. 170 bar, without throttle. If required, this can be retrofitted to the truck. (Truck with max. hydraulic delivery rate of 55 l/min) Operation hydraulically via truck PTO Hydraulic connection with SVK plug NW 10/3, incl. connection hose Tipping bridges Steel sheet floor Hardox 450, 4 mm thick, ball bearing at the rear, 100 mm diameter Side panel construction steel, side walls foldable and pivotally mounted with central locking at the bottom. Rear wall pivotable and as a 2-wing door (not foldable), with door holder and protective rubber on the side (not in conjunction with pivot or mesh grating attachment) Side wall retraction springs (not possible with foldable front wall) Platform width 2420 mm 5 pairs of lashing eyes in the floor, 5 tons each Painting Side panels/bridge painted in desired color Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer requirements.

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33902031174, empty load weight: 5,835 kg, maximum load weight: 29,165 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 06/2023, loading space volume: 50 m³, total length: 10,300 mm, total width: 2,550 mm, total height: 3,740 mm, suspension: air, tire size: 385/65 R22,5", color: grey, The images shown are archive photos. The vehicle may still be in use. Chassis Tipping Semi-Trailer Fine-grained steel welded construction in Basic lightweight design, fifth wheel plate with replaceable 2" king pin Curved front wall (patented) 24 t 2-speed support legs, single-sided operation, with straight base, without compensating rod 2x wheel chocks with holder Aluminium side underrun protection Rear under-run protection, foldable 6x half-shell mudguards Integrated mudguard holders with stone-repellent surface Tarpaulin rod with bracket 2x rear towing hooks Axles & Suspension BPW disc brake axles "Axle/chassis laser alignment" reduces tyre wear and fuel consumption Air suspension 1st axle with automatic lift, including forced lowering and starting aid, operated by '3x brake' application Braking System 2-line compressed air braking system Colour-coded routing for easy servicing Spring-type parking brake 2 non-interchangeable coupling heads at the front, without connection line EBS (Electronic Braking System) with EBS socket at the front, without connection cable Note: This trailer must only be towed by tractor vehicles that ensure ABS functionality! With lift & lower valve Vehicle stability control system Wheels and Tyres 6x 385/65 R22.5" tyres 6x steel rims Electrics 24 Volt, multi-chamber lights, side yellow LED lighting 2 white marker lights at front 2 white/red lane marker lights at rear 2 x 7-pin and 1 x 15-pin non-interchangeable sockets at front, without connection cable Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard chrome plated, with HDK screw coupling, fixed part, NW 48 mm (without hose connection) Tipping Body Aluminium box body made of high-quality, abrasion-resistant material Sloped 5 mm thick front wall with external cylinder mounting Side walls made of 30 mm hollow chamber profiles, clean welded, with bulk material deflecting top rail. Internal ladder at the front wall Shovel and broom holders outside front wall Rear wall with pendulum mounting and 'double-joint' hinges, with 2-winged door split 1/2 to 1/2, upper swing beam, with one grain slide per door Rear wall with rubber seal 6 mm continuous floor Standing platform with access, connecting plate for air/electric/brake Roll tarp can be stowed one side (FR-right), with central locking (FR-left) Operating Notes For transporting salt, lime, etc., we recommend a tipping cylinder with a hard chrome-plated piston rod to prevent corrosion and damage from the material. The total weight stated is technically possible; depending on the cargo, the full weight may not be achievable within the permissible axle/support/saddle loads (incorrect load distribution may result in poor handling and tracking). Note! Not suitable for chemically aggressive substances (e.g., acids, chlorine compounds, sulphur compounds, alternative fuels); such substances can cause stress corrosion cracking and extreme cracking in the body when combined with moisture on the body surface! Vehicles with load bodies are intended for chemically non-aggressive cargo. Use for transporting aggressive goods such as acids, bases, salts, fertilizers, sewage sludge, and household waste is at the operator's own risk. This can result in damage such as stress corrosion cracking or pitting. Lrjdpoy Efcusfx Afuet Archive images are shown!

Condition: good (used), 1 x SF Engineering Dolav / Bin Tipper SF Engineering stainless steel industrial Dolav/bin tipper, designed for lifting and tipping bulk product containers into downstream processing equipment, hoppers or production lines. * Manufacturer: SF Engineering * Year: 2016 * Electrical supply: 3 Phase * Heavy-duty stainless steel construction Lsdpjz A Dy Uofx Afusrt * Suitable for standard Dolav / pallet box handling * Elevated tipping/discharge arrangement * Guarded lifting frame * Industrial food production specification

Condition: like new (used), functionality: fully functional, machine/vehicle number: WFDFLT21201012268, empty load weight: 3,240 kg, maximum load weight: 8,560 kg, overall weight: 11,800 kg, axle configuration: 2 axles, first registration: 05/2022, loading space length: 5,000 mm, loading space width: 2,420 mm, total length: 6,900 mm, total width: 2,550 mm, total height: 950 mm, suspension: steel, tire size: 235/75 R17,5", color: green, The images are archive images. The vehicle may be in use! Ledpfx Afek E Tdaousrt Steel welded construction, continuous tipping shaft at the rear with 80 mm ball bearing, front gear support, foldable rear support, chocks with holder, steel underride protection, splash guards at the rear over the entire width (not in conjunction with forklift mount), quarter panel fenders, spare wheel, same brand as standard tires, steel rim, loose, plastic toolbox, with insert, w=620/h=360/d=440 mm, lockable with a padlock. (Lock not included) Note: The side board touches the storage box when folded down, lockable storage space for loading ramps below the loading area, pair of aluminum ramps 3,000 mm long, 360 mm wide, load capacity per pair 8,000 kg, (mounting rail for ramps at the rear) Drawbar with tested 40 mm towing eye, drawbar height-adjustable via spindle, max. adjustment range 300 mm BPW drum brake axles, axle/suspension laser-aligned to reduce tire wear and fuel consumption, parabolic suspension with maintenance-free steel-rubber bearing and mechanical axle load compensation (rocker compensation) 2-line compressed air braking system, color-coded line routing for easy servicing, hand-operated parking brake, integral air tank, ABS and ALB, with ABS connector at the front, with connection cable. Note: The trailer may only be pulled by towing vehicles that guarantee the effectiveness of the ABS, Duomatic connection at the front, with connection line to the truck. 24 Volt, multi-chamber lights, yellow LED lighting on the sides, 2 white position lights at the front, 2 white/red side marker lights at the rear, 1 x 15-pin connector at the front, with connection cable Three-way tipper, hydraulic multi-piston press with stroke limitation and safety cable, low-pressure cylinder up to max. 170 bar, without throttle. If required, this can be retrofitted on the truck. Hydraulic connection with SVK connector NW 10/3, incl. connection hose, operated hydraulically via truck auxiliary drive Stable tipping platform with 4 mm steel sheet floor, steel side board construction, continuous side walls, foldable and pivotally mounted with central locking at the bottom. Corner posts at the rear can be plugged in. Rear wall foldable and pivotally mounted, with central locking at the bottom, platform length approx. 5,000 mm, side walls with 6 hinges at the bottom. Side board retraction springs (not possible with split side walls), platform width 2420 mm, pair of lashing eyes in the floor, each 5 tons. Operating instructions: The specified total weight is technically possible, but depending on the load, the total weight may not be reached while complying with the permissible axle/support and drawbar loads. (Poor driving and tracking behavior possible due to incorrect load distribution). Country of registration: Germany, with Dekra approval and certificate (according to §13 EG - FGV), 24/7 service hotline, prepared for single-row license plate holder, contour marking with reflective tape according to ECE R 048, white on the sides and red at the rear. The images are archive images. The vehicle may be in use!

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,220 kg, maximum load weight: 8,580 kg, overall weight: 11,800 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 450 mm, total length: 6,900 mm, total width: 2,550 mm, total height: 1,550 mm, suspension: steel, tire size: 235/75 R17,5", tire condition: 100 %, Customized Transport Solution Lsdpfx Aozcv Stefusrt Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized to meet individual customer needs. Chassis: Central axle tilting trailer Steel welded construction, continuous tilting shaft at the rear with 80 mm ball bearing Gear-supported front support leg Foldable rear support Wheel chocks with holder Underrun protection, steel Splash guards at the rear, covering the entire width (not in conjunction with forklift mount) Quarter panel fenders 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable (lock not included) Note! The side panel touches the storage box when folded down. Lockable storage space for loading ramps below the loading area Coupling device for central axle trailer Drawbar with tested 40 mm tow hitch Drawbar height adjustable via spindle, max. adjustment range 300 mm Axles + Suspension GFA or BPW axles, at the manufacturer's choice, with tapered roller bearing and S-cam brake "Axle/chassis laser-aligned" - reduces tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearing and mechanical axle load equalization (linkage equalization) Wheels and Tires 235 / 75 R 17.5", manufacturer's choice Steel rims, factory silver Braking System 2-line compressed air braking system Color-coded line routing for easy servicing Handwheel-operated parking brake 24 Volt ABS and ALB, with ABS connector at the front, with connection cable Note: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! 2 fail-safe coupling heads at the front, with connection lines to the towing vehicle Electrical System 12 to 24 Volts, multi-chamber lights in LED, yellow LED side lighting, license plate lighting in LED 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pole fail-safe connectors at the front, with connection cable Additional LED work lights at the rear, switched via reversing light Hydraulics Three-way tipper, hydraulic multi-piston cylinder with stroke limitation and safety cable Low-pressure cylinder up to max. 170 bar, without throttle. If required, this must be retrofitted on the truck (truck with max. hydraulic flow rate of 55 l/min) Hydraulic connection with SVK connector NW 10/3, including connection hose Operation hydraulically via truck auxiliary drive Tipping Platforms Stable tipping platform with 4 mm steel sheet base, side panel construction in steel, side walls continuous, foldable and pivotally mounted with central locking at the bottom. Rear corner posts pluggable. Rear wall foldable and pivotally mounted, with central locking at the bottom. Platform length approx. 5,000 mm, side walls with 6 hinges at the bottom. Side panel retraction springs Platform width 2420 mm 3 pairs of lashing eyes in the floor, each 5 tons Paint Finish Frame: Hot-dip galvanized including passivation "15-year guarantee against rust through" Side panels/platform: galvanized or painted according to customer requirements Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized to meet individual customer needs.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 5,228 kg, maximum load weight: 29,772 kg, overall weight: 35,000 kg, axle configuration: 2 axles, loading space length: 7,200 mm, loading space width: 2,350 mm, loading space height: 1,600 mm, loading space volume: 27 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 3,350 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, color: original, Year of construction: 2026, Custom Transport Solution Configure your Fliegl trailer to your exact requirements. The vehicle shown is for illustration only. Production and equipment are tailored to customer specifications. Chassis Lightweight high-tensile steel welded chassis with replaceable 2" kingpin. Patented curved front design. 24 t two-speed landing gear with single-side operation. Rear swing clearance approx. 2,100 mm (rear position) / 2,600 mm (front position). 2 wheel chocks with holders. Aluminium side underrun protection. Pneumatically folding rear underrun guard. Half-shell mudguards with anti-spray flap on the last axle. Rear towing hook. Axles & Suspension SAF 430 mm disc brake axles in off-road specification. Laser-aligned axle/suspension system for reduced tyre wear and fuel consumption. Air suspension with air pressure gauge. Automatic first lift axle with forced lowering and traction aid, also electrically operated from the tractor. Hot-dip galvanized lift axle mechanism with 10-year anti-corrosion warranty. Braking System Dual-line air brake system with colour-coded air lines. Spring parking brake. 24 V EBS with front socket. Raise/lower valve. Electronic Stability Program (ESP). Automatic tipping lowering system with shut-off valve. TPMS (ECE R141) via EBS with display in the tractor. Axle load indication via EBS CAN bus. Tyres 385/65 R22.5. Electrical System 24 V LED lighting. LED front position lights. LED rear marker lights. LED side marker lights. 2 × 7-pin and 1 × 15-pin front sockets. Two recessed LED rear work lights. Hydraulics Lredpfx Aszl Ez Uofuet Low-pressure tipping cylinder (max. 170 bar), hard chrome-plated first stage. Hydraulic operation via PTO. Hydraulic connection with 48 mm HDK screw coupling. Body Round steel body in Stone Master Design, manufactured from wear-resistant HB 400/450 steel. Sloping front wall with external hydraulic cylinder mount. Internal front access ladder. Aerodynamic Greenline tapered body design. External shovel and broom holder. Hydraulic rear tailgate with approx. 2,200 mm opening height. Tailgate protection cover and rubber seal. Heat-resistant up to 170°C. Side walls 4 mm, floor 4/5 mm, weight-optimised wear-resistant construction. Cover System Fliegl S.T.E.P. swivelling front platform with folding access ladder (left side), in combination with Flip Top sliding cover. Electrically operated Flip Top cover with automatic rear locking bow, operated from the trailer or via radio remote control. 7-pin spiral cable to tractor included (tractor socket required).

Condition: used, Year of construction: 1999, Year: 1999 Condition: functional Technical specification: - Maximum sheet format: 1120 × 780 mm - Minimum sheet format: 400 × 400 mm - Layer height: 40 to 165 mm - Maximum stack height: 1300 mm - Load capacity: 200 kg - Operating air pressure: 6–8 bar - Electrical power consumption: 1.2 kVA POLAR Mohr Transomat TR 130 EL-4 The POLAR Mohr Transomat TR 130 EL-4 is an automatic unloading and stacking device designed for operation with high-speed paper cutting machines manufactured by POLAR Mohr. The unit automatically removes cut paper layers from the unloading table of the cutter and places them onto a pallet. This reduces manual handling, shortens auxiliary operating time, and improves the continuity and productivity of the cutting process. Operating principle Lrsdpfx Afjy Rqd Uouet After completion of the cutting cycle, the cut layer is transferred into the working area of the unit. The handling mechanism grips the layer, transports it, and places it accurately onto the pallet. The system includes a movable pallet tip which helps maintain precise alignment of the stack.

Condition: used, Year of construction: 2007, Used Blow Molding Machine SIPA SFR12 18000 bph General Features of the SIPA SFR12 Blow Molding Machine The Used Blow Molding Machine SIPA SFR12 18000 bph performs PET container stretch blow molding and SIPA manufactured it in 2007. As a result of its SFR12 configuration, which includes 12 cavities, the system reaches a nominal speed of 18,000 bottles per hour. Consequently, it delivers high production efficiency across multiple formats. Specifically, this machine processes volumes from 0.25 to 2 liters. Therefore, it fits seamlessly into high-speed bottling lines, particularly in the mineral water and soft drink industries. Moreover, thanks to its compact layout, it optimizes floor space usage. Preform Compatibility and Technical Specifications This machine processes preforms with 3-start Alaska neck finishes and supports weights ranging from 12 to 34 grams. In particular, operators can quickly change formats thanks to the integrated quick-change system, which significantly reduces downtime. In addition, the automated system feeds, tips, and orients the preforms accurately. As a result, the machine ensures a continuous and correctly aligned flow into the heating and blowing stations. Furthermore, this setup minimizes manual intervention and improves process reliability. Notably, the Used Blow Molding Machine SIPA SFR12 18000 bph maintains stable, uninterrupted production across varying operational conditions. Integrated Systems and Automation The machine uses a Siemens PLC for core process control; thus, it guarantees reliable and intuitive management in industrial environments. Furthermore, the system includes certified safety protections, which enhance operator safety and regulatory compliance. Additionally, the air recovery system reduces energy waste and lowers operational costs. Equally important, the rotary blowing system distributes pressure and heat evenly across all cavities. Hence, the machine ensures uniform container quality even during high-speed operation. In comparison to older models, this version offers improved thermal control and air distribution efficiency. Operational Status and Technical Documentation Currently, the Used Blow Molding Machine SIPA SFR12 18000 bph remains in storage, although it is ready for recommissioning after standard inspection or overhaul. Fortunately, the machine includes original technical manuals, available spare parts, and revision records, which together facilitate seamless installation and integration. Moreover, the documentation enables faster troubleshooting and efficient maintenance scheduling. Lodsxqmp Rjpfx Afusrt Technical Summary for Line Integration Overall, the Used Blow Molding Machine SIPA SFR12 18000 bph delivers a robust and high-performance solution for production facilities that require consistent, flexible, and high-throughput blow molding. Because of its solid engineering and standard-format compatibility, it serves as a strategic asset for companies looking to upgrade or expand bottling capacity. Furthermore, the availability of auxiliary components and spare parts, along with comprehensive documentation, allows for rapid and reliable integration. Ultimately, this machine enhances line performance while supporting operational continuity and cost-efficiency.

Condition: new, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 9,500 mm, loading space width: 2,350 mm, loading space height: 2,400 mm, loading space volume: 50 m³, total width: 2,550 mm, Year of construction: 2026, Equipment: ABS, KEMPF 3-Axle Tipper Semi-Trailer SKM 36/3 SR Membrane ? Steel Half-Pipe Body (50.4 m³) New Vehicle Availability: Expected February 2026 ----Technical Specifications Type: KEMPF SKM 36/3 SR Membrane * Design: 3-axle tipper semi-trailer with steel half-pipe body * Permissible total weight: 36,000 kg * Axle load: 3 x 8,000 kg * Fifth wheel load: approx. 12,000 kg * Loading length: approx. 9,500 mm * Loading width: approx. 2,350 mm * Body height: approx. 2,400 mm * Body volume: approx. 50.4 m³ * Total height: approx. 3,830 mm to the top edge (loaded) * Nominal coupling height: approx. 1,200 mm (technically 1,200–1,260 mm) ----Superstructure / Body Steel half-pipe body in durable off-road design * Material: highly wear-resistant HARDOX steel (HB 450 / HB 500) * Floor: continuous 5 mm HARDOX steel, reinforced * Side walls: 4 mm HARDOX steel * Front wall: 20° inclined, 4 mm HARDOX steel * Rear wall: double-leaf (1/3 left, 2/3 right), grain-tight, with pneumatic 2-hook locking system and integrated slide (400 x 400 mm) * Cover plate: removable, protects slider from dirt and damage * Air vibrator: rear left, operated by switch * Catwalk with ladder and guardrail according to accident prevention regulations (UVV) * Internal access via step system in the front wall * Shovel and broom holder on the front wall ----Chassis and Superstructure KEMPF welded construction made of fine-grained steel, sandblasted and hot-dip galvanized * Off-road version, conically tapered * Chassis color: Deep Black (RAL 9005) * Body color: White Aluminium (RAL 9006) Lodpfexn Ebmox Afuert * Tarp color: Silver (Mehler 911) * Attachments: hot-dip galvanized and black powder-coated * Robust and high-quality overall construction ----Axles, Tyres, and Suspension SAF INTRADISC plus Integral off-road axles with disc brakes (Ø 430 mm) * Axle with automatic lift axle and forced lowering * Tyres: 385/65 R 22.5 (brand according to Kempf's choice) * Rims: Alcoa Ultra ONE aluminum rims, Dura-Bright EVO * Air suspension system with lift/lower function and quick release * Load gauge with scale display at the front left * Chassis laser-aligned (optimized tire wear and fuel consumption) ----Hydraulics and Tipping System HYVA front tipping cylinder, single-circuit hydraulic system (190–250 bar) * Edbro 1" closure coupling, high mounted * Hard-chromed piston, robust design ----Brake and Safety Systems Knorr EBS with RSP (Roll Stability Program) * ABS with 4-channel configuration (4S/2M) and brake light connection * Tire pressure monitoring system in accordance with ECE R141 * Trailer Info Module TIM G2 with brake wear indicator and diagnostic data * Acoustic reverse warning system * Folding underrun protection to ECE R58.03 with spring-assisted lifting ----Lighting and Electrics Complete LED lighting to EC standard, ADR compliant * LED triple chamber lights with chrome rings * LED side markers with indicator function * LED cargo space lighting, operated by switch * LED reversing lights (2 additional side-mounted) * LED rear fog light and license plate lighting * Brake light * 15-pin socket ----Accessories and Extras Two PVC toolboxes (approx. 660 x 500 x 460 mm each) * Removable aluminum ladder (4 m) with holder * Two plastic wheel chocks * Double-sided side underrun protection in accordance with EC regulation * Folding A-plate at the rear of the chassis * Large reflective panel (200 x 1,130 mm) * Mud flaps with spray suppressor * Two aluminum landing legs (load capacity 24 t) ----Tarpaulin and Frame Rol

Condition: used, mileage: 455,000 km, power: 354 kW (481.31 HP), first registration: 05/2005, fuel type: diesel, axle configuration: 6x4, fuel: diesel, color: other, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro3, suspension: steel, Year of construction: 2005, Equipment: ABS, electric window regulation, fog lights, power assisted steering, power mirror, = Additional options and accessories = Lredpfxsz Euw Aj Afuot - Air horn - Hub Reduction - Immobilizer - PTO - Radio - Sleeping cabin - Sper = Remarks = MAN TGA 26.480, 2005, 455,000 km Euro 3, 6x4 with hub reduction, Leaf-sprung, Manual transmission = More information = Suspension: leaf suspension Front axle: Steering Rear axle 1: Double wheels; Reduction: hub reduction Rear axle 2: Double wheels; Reduction: hub reduction GVW: 28.000 kg Tipper: Back = Dealer information = Bank data: Rabobank Account: 39.33.10.655 IBAN: NL73RABO0393310655 Swift code: RABONL2U - Always check our bank details before transaction! - Reservation of vehicles is not possible without a deposit. - Writing and text errors are reserved for all vehicles offered.

Condition: used, Year of construction: 2012, machine/vehicle number: 595123859, next inspection: October 2026 Lrodsz D Ttmopfx Afuot

Condition: excellent (used), mileage: 87,591 km, power: 96 kW (130.52 HP), first registration: 05/1965, fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: red, driver cabin: day cab, gearing type: mechanical, suspension: steel, total length: 6,500 mm, total width: 2,400 mm, total height: 1,500 mm, loading space length: 10,100 mm, loading space width: 2,500 mm, loading space height: 2,700 mm, Year of construction: 1965, = Additional options and accessories = - Leaf spring - Power take-off (PTO) - PTO - Speed limiter = Remarks = WDB12345 = More information = Brakes: disc brakes Suspension: leaf suspension Front axle: Steering; Tyre profile left: 45%; Tyre profile right: 45% Rear axle: Tyre profile left: 45%; Tyre profile right: 45% Tipper: Back Technical condition: very good Ledpfx Afoymqn Rjusrt Visual appearance: very good = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: new, empty load weight: 3,020 kg, maximum load weight: 8,640 kg, overall weight: 11,800 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 450 mm, total length: 6,950 mm, suspension: other, color: white, fuel type: gasoline, gearing type: other, driver cabin: other, emission class: none, Equipment: ABS, - Fliegl three-sided tipping trailer, type TSK 118, new vehicle, delivery time on request - Aluminum ramps optional, 1,800 EUR net - Price with ramps: 22,700 EUR plus VAT - Factory new - Frame hot-dip galvanized - Permissible total weight: 11,800 kg - Unladen weight: 3,160 kg - Payload: 8,640 kg - Overall length: 6,950 mm - Overall width: 2,550 mm - Platform dimensions: L 5,000 mm, W 2,420 mm, loading height: 950 mm - Steel welded construction - Support leg at the front - Folding rear support (aluminum ramps optional, 1,800 EUR net) - Underrun protection, steel - Continuous mud flaps at the rear - Lockable storage compartment for loading ramps below the loading platform - Towing eye, 40 mm - Drawbar, height-adjustable - BPW axles - "Chassis laser-aligned" to reduce tire wear and fuel consumption - Parabolic suspension with maintenance-free steel-rubber mounts and mechanical axle load equalization - 235/75R17.5 tires - 2-line pneumatic braking system, manual parking brake - ABS and ALB - Stable tipping platform with 4 mm steel sheet floor - Side walls foldable and pivoting with central locking - Corner posts at the rear, plug-in type - Rear wall foldable and supported with central locking - 5 pairs of lashing points in the floor, each 5 tons - Contour marking with reflective strips - Frame hot-dip galvanized, 15-year warranty against rust - Platform color: RAL 9010 pure white - Errors and prior sale excepted! - More information, additional XXL pictures, directions, can be found on our website at: ... VAT can be shown, ABS, new, very good condition, HSN 7951, TSN 000, consumption: 0.0/0.0/0.0 l/100 km (combined/urban/extra-urban) Lrsdpfx Aezv Nrljfujt

Condition: used, Year of construction: 2007, edge thickness (max.): 3 mm, feed rate X-axis: 25 m/min, controller model: PC22, TECHNICAL DETAILS The machine has the following configuration: Minimum edge thickness: 0.3 mm Maximum edge thickness: 3 mm Maximum feed rate: 25 m/min Pressure bar: with rubber belt Panel stop: with CNC positioning Panel infeed alignment system: available Edge application unit Processing interval: automatically time-controlled Motor power: 3 kW Speed: 9,000 rpm Edge processing Edge heating lamps: available Roller magazine: available Hot melt adhesive reservoir: available Hot melt adhesive pre-melter: available Number of pressure rollers: 7 Lrsdez Ekbkspfx Afujt Positioning: CNC-controlled Trimming unit Number of motors: 2 Motor power: 0.8 kW Speed: 12,000 rpm Flush trimming unit, top and bottom Number of motors: 2 Motor power: 1.5 kW Speed: 12,000 rpm Edge rounding unit Manufacturer/Model: FF12 Number of motors: 4 Motor power: 0.4 kW Speed: 12,000 rpm Profile trimming unit Number of motors: 1 Processing interval: automatically time-controlled Motor power: 5 kW Speed: 11,600 rpm Scraping blade unit Manufacturer/Model: PN10 Glue scraping blade unit Brushing unit Number of motors: 2 Spray device: available MACHINE DETAILS Number of processing units in edge processing: 7 Control system: PC22 EQUIPMENT Pressure bar with rubber belt Panel stop with CNC positioning Panel infeed alignment system Edge heating lamps Roller magazine Hot melt adhesive reservoir Hot melt adhesive pre-melter 7 pressure rollers Trimming unit Flush trimming unit, top and bottom Edge rounding unit FF12 Profile trimming unit Scraping blade unit PN10 Glue scraping blade unit Brushing unit with spray device PC22 control The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External Reference: 6042

Condition: used, functionality: fully functional, Year of construction: 2011, operating hours: 2,709 h, 2011 | Bobcat S100 | Used Skid Steer Loader | 2,709 hours Location: Wisconsin, United States Delivery available to your destination. About this machine: Bobcat S100 skid steer with a Kubota diesel engine (33 hp net / 35.5 hp gross), rated operating capacity of 1,000 lb (457 kg). Cab with heat, mechanical suspension seat, and switchable ISO/H pattern joystick controls. 2-speed drive, manual quick tach, block heater, and foot throttle. ✔ Cab with heat ✔ Mechanical suspension seat ✔ EH ISO-H pattern switchable controls ✔ 2-speed drive ✔ Manual quick tach ✔ 48" general purpose bucket Lrodszxhyajpfx Afuot ✔ Auxiliary hydraulics ✔ Block heater ✔ Foot throttle ✔ 27x8.50-15 tires — 40% remaining Key specs: Engine: Kubota V1,505-E2B-BCZ, net power 33 hp (24.6 kW) Emission standard: EU Stage V / EPA Tier 4 Final Rated operating capacity (ROC): 457 kg (1,000 lb) Tipping load: 915 kg Operating weight (rear): 1,860 kg Hydraulic pump flow (loader): 50 L/min System pressure at couplers: 20,700 kPa Max travel speed: 10 km/h Fuel tank: 45 L What buyers get with us: ✔ No buyer fees ✔ Verified sellers ✔ Make offer ✔ Pre-sale inspection ✔ Instant shipping rates and worldwide delivery ✔ Documentation support ✔ Secure transaction on every purchase

Condition: excellent (used), functionality: fully functional, power: 81 kW (110.13 HP), gearing type: hydrostat, fuel type: diesel, fuel tank capacity: 162 l, color: original, overall weight: 11,000 kg, empty load weight: 11,000 kg, operation weight: 11,850 kg, tire size: 650/45R22.5 (331 profiel – op 1 band rechtsvoor na), tire condition: 70 %, drive condition: 100 %, axle configuration: 2 axles, number of seats: 1, first registration: 06/2017, emission class: euro5, Year of construction: 2017, operating hours: 9,566 h, Equipment: USB port, additional headlights, adjustable boom, air conditioning, all wheel drive, cabin, crane, cruise control, gripper hydraulics, hydraulics, lighting, onboard computer, standard shovel, trailer coupling, JCB HYDRADIG 110W AS GOOD AS NEW WITH 3 EXTRA ATTACHMENTS, READY FOR IMMEDIATE USE - 2 x BUCKET (DEMOLITION BUCKET, DITCH CLEANING BUCKET) - 1 x KINSHOFER SORTING GRAB OPTIONAL WITH: - AGRIMASTER FLAIL MOWER - DABEKAUSEN HEDGE TRIMMER OCTOBER 2025: - 500-hour inspection - Relay fault resolved - Machine runs perfectly Engine - JCB Ecomax 444 Tier4Final - Without particulate filter, with AdBlue - Power: 81 kW 109 HP - Water-cooled, turbocharged, common rail injection - Dry air filter, start/stop with ignition key Lrjdpfx Afjykrvdeuot - Electric fuel pump - Reversible cooling fan - Fuel tank capacity: 162 l - Year of manufacture: 2017 - Operating hours as of November 2025: 9570 hours Swing System - Hydraulic swing system - Automatic swing brake Undercarriage - Rear blade (parallel guided) - Cylinder protection for blade - 40 km/h drive (road, work and creep mode, cruise control) - 14 t JCB axles - 4-wheel steering, direction changeable between forward and reverse - 2-wheel, 4-wheel, and crab steering (automatic alignment) - Alliance tyres 650/45R22.5 (331 tread – except one tyre front right) - Wheel arches, pivoting with the wheels Adjustable Boom - Boom swing range 50 degrees left - Boom swing range 70 degrees right - Digging arm length 2.0 meters Electrical System - 12 V electrical system - 1 x 12V heavy duty battery, 50-amp alternator - Full road lighting + illuminated license plate holder at cab - Front cab work lights 2 x LED - Rear cab work lights 2 x LED - Additional rear cab work lights 2 x LED - Boom work lights 2 x LED - Warning beacon at rear of cab 2 x Hydraulics - 2 x hydraulic pump 158.4 l/min x 187 l/min - Maximum system pressure v Extras - Crane manual and inspection - Hydraulic quick coupler CW10 + lifting hook - Switching of valve block supply to mower basket function - Free swing (electrically switchable) - Work light inside digging arm - Rockinger trailer hitch + electric - Trailer tipper function + double-acting - Additional double-acting function undercarriage - Hydraulic trailer brake connection (undercarriage) - Undercarriage power supply for camera-tipping bucket - Extra 7-pin socket through undercarriage - Extra socket undercarriage for indicator light - JCB Live Link weekly machine report (annual subscription) STANDARD DITCH CLEANING BUCKET - In very good condition - No cracks in the bucket - Blades are good SORTING GRAB - Brand Kinshofer D09HPX - Sorting grab with rotator CW10 - Hoses and couplings complete - Year built: 2016 - Technically in perfect condition DEMOLITION BUCKET - Brand GP - As good as new TIPPER TRAILER - Brand DKV - Hydraulic tailgate - Max. total weight 7 tons - Dutch registration - Suitable for tractor and excavator

Condition: used, Year of construction: 1989, operating hours: 8,341 h, 1989 | Atlas Copco QAS-85 | Used Generator Set | 8341 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 5000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* Lrodpfxez Ebuuj Afuet 👷‍♂️ Inspected by an independent expert 20 inspection points 17 approved ✅ 3 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Good overall condition. Caution, 1989 machine without CE marking and without sockets equipped with protection against overloads, short-circuits, or leakage currents. Plan connection on the busbar set. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "41430 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 2,520 kg, maximum load weight: 8,000 kg, overall weight: 10,500 kg, axle configuration: 2 axles, loading space length: 5,500 mm, loading space width: 2,050 mm, loading space height: 400 mm, total length: 7,280 mm, total width: 2,550 mm, total height: 2,900 mm, suspension: steel, tire size: 235/75 R17,5", tire condition: 100 %, Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized according to customer requirements. Chassis: Central axle trailer, low loader Fine-grained steel welded construction Gear-supported front support Telescopic rear support 2 chock blocks with holder Fenders made of sheet steel over both wheels with anti-splash flaps only on the last axle Aluminum side impact protection Front crossbar that can be inserted into the floor holes Coupling device for central axle trailer Drawbar with tested 40 mm towing eye Drawbar height-adjustable via spindle, max. adjustment range 250 mm Axles + Suspension BPW drum brake axles "Axle/chassis laser-aligned" – reduces tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearing and mechanical axle load compensation (linkage compensation) Wheels and tires 235 / 75 R 17.5" as per manufacturer's choice Steel rims, factory silver Braking system 2-line compressed air braking system Spring-loaded parking brake 2 fail-safe coupling heads at the front, with connecting lines to the towing vehicle Parking sockets for electrical wiring, ABS/EBS and air connection to the drawbar 24 Volt EBS, Electronic Braking System with EBS plug at the front, with connecting cable Caution: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! "TPMS" tire pressure monitoring system according to ECE R 141, display via display in the towing vehicle, via EBS Electrical system 24 Volt, multi-chamber lights in LED, yellow LED lighting on the side, license plate lighting in LED Yellow LED lighting on the side coupled with the turn signal "flashing side lights" Ljdpfezcnugox Afujrt 2 white position lights at the front in LED 2 white/red outline lights at the rear in LED Premium LED side marker lights, with "20 LED diodes per light" 2 x 7-pole fail-safe plugs at the front, with connecting cable Platform TTS low-lying steel tub, platform floor made of steel/non-slip metal plate, steel walls firmly welded to the floor Platform length 5500 mm Tub with "Load-Lock profile" at the front and on the side for attaching lashing straps (8 pieces at the front, 16 pieces on each side) 2 pairs of lashing rings, 1 x at the front in the corners of the steel tub and 1 x at the rear in the floor, each 5 tons 3 pairs of additional lashing rings in the floor, each 5 tons 4 pairs of lashing rings screwed onto the side walls Ramps Steel ramps, 2,300 mm long, 510 mm wide, can be shifted sideways with handrail on the ramps covered with wood (tip area with steel/non-slip metal plate) with gas spring for single-person operation Rear wall / rear corner posts Screen-printed panel, 400 mm high, pluggable, between ramps Operating instructions The specified total weight is technically possible, depending on the load, the total weight may not be reached while complying with the permissible axle/support and saddle loads. Country of registration / signs Country of registration: Germany Type approval according to EG 2007/46 prepared for license plate holder, single-line Contour marking with reflective strips according to ECE R 048, white on the side and red at the rear Warning sign according to ECE - 70 Custom-made transport solution

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 5,100 kg, maximum load weight: 33,900 kg, overall weight: 39,000 kg, axle configuration: 3 axles, permissible axle load (axle 1): 12,000 kg, permissible axle load (axle 2): 12,000 kg, permissible axle load (axle 3): 12,000 kg, loading space length: 9,325 mm, loading space width: 2,470 mm, loading space height: 1,750 mm, loading space volume: 40 m³, total length: 10,300 mm, total width: 2,550 mm, total height: 3,230 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, ## Customized Transport Solution Configure your Fliegl vehicle according to your individual requirements. The vehicle shown is an example configuration. Production and equipment are tailored to customer specifications. ## Chassis – Semi-Tipper Trailer * High-tensile fine-grain steel welded lightweight construction (basic lightweight design) * Patented curved front end design * Fifth wheel plate with replaceable 2” king pin * 24-tonne 2-speed landing gear, single-side operation, with semi-round base and straight mounting plate, including thrust compensations * Spare wheel carrier for 1 spare wheel including mounting kit * Spare wheel matching the original tyres, mounted on steel rim * Lockable plastic toolbox with drawer and shelf insert (650 × 520 × 670 mm, W × H × D) * Tarpaulin support bar with holder * Rear towing hooks ## Axles & Suspension * Disc brake axles with 430 mm brake discs * Off-road axle specification * Laser-aligned axles and running gear for reduced tyre wear and fuel consumption Ljdpezhgp Sefx Afujrt * Air suspension system * 1st axle as automatic lifting axle including forced lowering and traction aid * Activated via “3x braking” * Function active up to 30% axle overload and max. 25 km/h * Galvanised lifting axle mechanism * 10-year anti-corrosion warranty against perforation rust ## Braking System * Dual-line compressed air braking system * Colour-coded piping for easy maintenance * Spring-loaded parking brake * Two non-interchangeable coupling heads at the front * EBS electronic braking system with front EBS socket * Raise-and-lower valve integrated ## Vehicle Stability System * Automatic tipping lowering function with shut-off valve ## Wheels & Tyres * 385/65 R 22.5 tyres * Steel rims, factory silver finish ## Electrical System * 24 V electrical system * LED multi-chamber rear lights * LED licence plate lighting * Yellow LED side marker lights * White LED front position lights (2 units) * White/red LED rear outline marker lights (2 units) * 2 × 7-pin and 1 × 15-pin front sockets (without connecting cables) * Additional integrated rear LED work lights ## Hydraulic System * Low-pressure hydraulic cylinder, max. 170 bar * First stage hard chrome plated * HDK screw coupling, fixed section, NW 48 mm * Hydraulic operation via truck PTO (power take-off) * Hydraulic connection with hose and HDK screw coupling NW 48 mm with knurled nut ## Tipping Body – Aluminium Box Body (40 m³) * High-quality wear-resistant aluminium body construction * Sloped 5 mm front wall with external hydraulic cylinder mounting * Side walls made of 30 mm hollow chamber profiles, fully welded * Upper edge profile designed for improved material discharge resistance * Internal access ladder at front wall * External shovel and broom holder on front wall * Aerodynamic tapered “Greenline” body design ### Rear Door System * “Membrane” tailgate design * Pendulum rear door with double-joint hinge system * Externally mounted with double hook locking system * Rubber-sealed tailgate * Central grain slide gate ### Floor & Equipment * Continuous 6 mm aluminium floor * Standing platform with access ladder * Connection panel for air, electrics and braking system with large free working space for optimal operation * Sliding tarpaulin system, one-sided storage (right-hand side driving direction)