Almig for sale
Identified location: Ashburn (US) (Edit)
|
9
Erlangen, Germany
6728 km
2019
as good as new (ex-display)
Almig screw compressor holder Combi 8/270 D - 10 bar Including dryer Including 270 liters of compressed air tank Year 2019 // Exhibit immediately available Technical specifications: Type: Combi 8 / 270D Maximum final pressure: 10 bar (ue) Delivery quantity, according to ISO 1217 Annex C, at 10 bar (ue): 1.02 m³ / min Installed engine power: 7.5 kW Speed of drive motor: 3000 1 / min Degree of protection / insulation class drive motor: IP 55 / F Efficiency class: IE 3 Operating ... more
|
|
6
feed pressure 8 bar Nm3bd 3.000 1/min engine output 7,5 kW volume capacity 1,10 m³/min total power requirement kW weight of the machine ca. t dimensions of the machine ca. 1,40 x 0,70 x 1,70 m more
|
|
3
erdmannhausen, Germany
6650 km
2014
excellent (used)
ALMIG ALM1320400 1014007 Refrigerant dryerModel year 2014 Fe7xyxz more
|
|
7
Ireland
5336 km
2013
ready for operation (used)
22kW Air Compressor Airko Solutions Variable Speed, this is a used compressor, which was in a friends garage, works well, requires 3 phase and is 2013. Shipping can be arranged. 2o8lspni more
|
|
5
Description: Ready-to-connect compressed air compressor with sound insulation hood, control and heat recovery for heating water. Bvj8pkd3 Type: Belt 37-8 Manufacturer: Almig Built: 2011 Documentation: no Warehouse: Lager Warburg Status: used - as good as new Flow rate: 5.78 m3/min (delivery quantity according to ISO 1217 Appendix C) Pressure: 8 bar (overpressure bar(ü)) Power: 37 kW (drive power drive) Further information: (residual oil content 2-4mg/m3) Protection class: 55 IP Acce... more
|
|
3
Milicz, Poland
7017 km
2004
excellent (used)
Rotary screw Compressor ALMIG ALLEGRO 16/SO MACHINE AFTER SERVICE Technical data: Capacity: 0.76-3.03 m3/min; Engine with a power of 16 KW; Pressure 5-13 Bar Year of manufacture: 2004 Bfk9ivbjnw Fully efficient compressor; NET Price: 10200, 00 PLN Gross Price: 12546, 00 PLN more
|
|
11
Erlangen, Germany
6728 km
2018
as good as new (ex-display)
Almig screw compressor Combi 8 D - 10 bar Including dryer Bj 2018 // Exhibit immediately available Technical specifications: Type: Combi 8D Maximum final pressure: 10 bar (ue) Delivery quantity, according to ISO 1217 Annex C, at 10 bar (ue): 1.02 m³ / min Installed engine power: 7.5 kW Speed of drive motor: 3000 1 / min Degree of protection / insulation class drive motor: IP 55 / F Efficiency class: IE 3 Operating voltage: 400V Mains frequency: 50 Hz Bc8pqulra Dimension (L x... more
|
|
5
Oelde, Germany
6441 km
2007
excellent (used)
Almig Nqycfk3c Variable 16 Rotating toe algae rain parental screw air compressor Engine power: 16kW Discharge pressure: 5 - 13 bar Quantity: 1.16-2, 52 m³/min more
|
|
6
erdmannhausen, Germany
6650 km
2008
excellent (used)
ALMIG ADQ1000 refrigerant dryer year 20083,95kw 12bar Bfnpxsqj2w more
|
|
3
Volume flow: 0.76-3.91m³/min, final pressure: 5-13bar, rotational speed: 1500-6400/min, motor power: 22kW. Bffj7iawzf more
|
|
|
|
3
Milicz, Poland
7017 km
2013
excellent (used)
Screw compressor ALMIG (ALUP) FLEX 11 machine with the inverter (zmiennoobrotowa) and the desiccant air Technical data: the performance of 0.46-1.84 m3/min; engine 11 KW; max pressure 5-13 bar 2013rok; 5764 (h); Fe7tbmb more
|
|
6
Erlangen, Germany
dealership location
6728 km
2018
new
Screw compressor ALMIG COMBI 8 with 10 bar (air cooled) Year 2018 / IMMEDIATELY AVAILABLE! Technical specifications Type: COMBI 8 Operating pressure: 10 bar (ue) Delivery quantity, according to ISO 1217 Annex C: 1,02 m³ / min Degree of protection / insulation class Drive motor: IP 55 / F Co7r0jv0 Rated power drive motor: 7.5 kW Operating voltage / frequency: 400/50 V / Hz Sound pressure level (DIN 45635 T.13): 64 dB (A) Length: 1180 mm Width: 770 mm Height: 1,128 mm Weight: 3... more
|
|
5
Oelde, Germany
6441 km
2008
excellent (used)
Almig Nmvh7 Variable 16 Rotating toe algae rain parental screw air compressor Engine power: 16kW Discharge pressure: 5 - 13 bar Quantity: 1.16-2, 52 m³/min more
|
|
2
Milicz, Poland
7017 km
2008
excellent (used)
ALMIG screw compressor BELT 15-10 THE MACHINE ON Technical data: Nfatp Performance: 1,98 m3/min; engine 15 KW; pressure 10 bar the course of 7482 h; year of manufacture: 2008 more
|
|
9
Erlangen, Germany
6728 km
2019
as good as new (ex-display)
Screw compressor ALMIG BELT XP 8 - 10 bar (air cooled) Year 2019 / IMMEDIATELY AVAILABLE! Technical specifications Type: BELT XP 8 Operating pressure: 10 bar (ue) Delivery quantity, according to ISO 1217 Annex C: 0.99 m³ / min Degree of protection / insulation class drive motor: IP 55 / ISO F Rated power drive motor: 7,5 kW 2rj37y Operating voltage / frequency: 400/50 V / Hz Sound pressure level (DIN 45635 T.13): 63 dB (A) Length: 800 mm Width: 670 mm Height: 1100 mm Weight: 27... more
|
|
11
Erlangen, Germany
6728 km
2014
excellent (used)
Almig screw compressor system Combi 11 - 10 bar used machine with AirControl Mini Year of construction: 2014 Operating hours: 933 Bh Technical specifications Type: Combi 11 - 10 bar Maximum final pressure: 10 bar (ue) Delivery quantity, according to ISO 1217 Annex C, at 10 bar (ue): 1.43 m³ / min Installed engine power: 11.0 kW Dtifdzlx Speed of drive motor: 3000 1 / min Degree of protection / insulation class drive motor: IP 55 / F Efficiency class: IE 3 Operating voltage: 40... more
|
|
11
Erlangen, Germany
6728 km
2010
good (used)
Variable speed screw compressor ALMIG FLEX 16 me Air Control 3 Used machine from 2010 / fully functional Operating hours: 12851 Bh Technical specifications Type: FLEX 16 Possible overpressures of the plant (infinitely adjustable): 5 - 13 bar Delivery quantity at minimum / maximum speed, measured according to ISO 1217 appendix C at 5 bar (g): 1.42 / 2.89 m³ / min at 6 bar (g): 1.40 / 2.87 m³ / min at 7 bar (g): 1.39 / 2.79 m³ / min Dpjecdv at 8 bar (g): 1.37 / 2.57 m³ / min at... more
|
|
11
Erlangen, Germany
6728 km
2018
as good as new (ex-display)
frequency controlled screw compressor ALMIG FLEX 15 Plus with refrigeration dryer me Air Control Premium Exhibit of 2018 / IMMEDIATELY AVAILABLE! Operating hours: 3.5 hrs Technical specifications Type: FLEX 15 Possible overpressures of the plant (infinitely adjustable): 5 - 10 bar Delivery quantity at minimum / maximum speed, measured according to ISO 1217 appendix C at 5 bar (g): 0.54 / 2.10 m³ / min at 6 bar (g): 0.54 / 2.10 m³ / min at 7 bar (g): 0.53 / 2.10 m³ / min Bfmtn... more
|
|
10
Erlangen, Germany
dealership location
6728 km
2019
as good as new (ex-display)
Demonstration machine: Screw compressor ALMIG BELT 5 - 10 bar 2teg0pg7r MADE IN GERMANY Year of construction: 2019 Warranty Terms: 12 months technical spezifications: type: BELT 5 Maximum operating pressure: 10 bar Delivery quantity at 10 bar : 0,78 m³/min Installed power: 5,5 kW speed drive motor: 2925 1/min Protection class / Insulation class Drive motor: IP 55 / F Operating voltage / frequency: 400/50 V / Hz Sound pressure level (DIN 45635 T13) : 65 dB (A) Compressed air co... more
|
|
7
new, lying ALMIG 200 liter compressed air tank - 2017 Length: 1400 mm Width: 460 mm Height: 540 mm Pressure: 16 bar / 232 psi Zfx3ythu Visit our shop. We always have a large selection of new and used compressors in stock! Immediately available. more
|
|
7
New speedcontroled screwcompressor ALMIG Variable XP 55 Year 2019 Hours: 3 h good condition, available short. Technical specifications: type: Variable 55 Possible operating pressures of the system: 5 to 13 bar Quantity delivered at 5 bar : 3,20 to 10,52 m³/min at 6 bar : 3,19 to 10,40 m³/min at 7 bar : 3,18 to 10,30 m³/min at 8 bar : 3,16 to 9,60 m³/min at 9 bar : 3,15 to 8,41 m³/min at 10 bar : 3,13 to 8,40 m³/min at 11 bar : 3,07 to 7,62 m³/mi... more
|
|
9
New speedcontroled screwcompressor ALMIG Variable XP 200 Year 2019 Hours: 2 h good condition, available short. Technical specifications: type: Variable 200 Possible operating pressures of the system: 5 to 10 bar Quantity delivered at 5 bar : 9,63 to 43,58 m³/min at 6 bar : 9,80 bis 38,85 m³/min at 7 bar : 9,92 to 35,00 m³/min at 8 bar : 9,65 to 33,00 m³/min at 9 bar : 9,61 to 31,25 m³/min at 10 bar : 9,56 to 30,20 m³/min Installed power: 200 ... more
|
|
8
Frauenauracher Str. 61, 91056 Erlangen, DE
6728 km
2018
new
New ALMIG FLEX 7 variable screw compressor with dryer Year: 2018 The compressor is on stock, available immediately. effective volume flow min/max (acc. to ISO 1217 / Annex C) 5 bar: 0,55 - 1,32 m³/min 6 bar: 0,54 - 1,25 m³/min 8 bar: 0,53 - 1,11 m³/min 10 bar: 0,52 - 0,97 m³/min 13 bar: 0,52 - 0,76 m³/min compressed air outlet: G 3/4" dimensions ( l x w x h ) 870 x 590 x 990 mm Bbmrpy8rwk weight: 165 kg type: FLEX 7 more
|
|
2
Erlangen, Germany
6728 km
2017
as good as new (ex-display)
Speedcontroled screwcompressor ALMIG VARIABLE 150 LK The compressor is on stock, Immediately available Year 2017 Hours: 4 Special equipments: -controller: AIR CONTROL PREMIUM -Extra motor lubrication (for installation in a warm environment) -Air cooling with axial fan Technical specifications: type: VARIABLE 150 LK Dsihozp Possible operating pressures of the system: at 5 bar : 9,51 to 31,15 m³/min at 6 bar : 9,45 to 28,56 m³/min at 7 bar : 9,40 to 27,75 m³/min at 8 ba... more
|
|
4
Erlangen, Germany
6728 km
2018
as good as new (ex-display)
used Screw compressor ALMIG BELT 22 - 8 bar MADE IN GERMANY Year of construction: 2018 Hours: 9 technical spezifications: type: BELT 22 Maximum operating pressure: 8 bar Delivery quantity at 10 bar : 3,54 m³/min Installed power: 22 kW Protection class / Insulation class Drive motor: IP 55 / F Operating voltage / frequency: 400/50 V / Hz Sound pressure level (DIN 45635 T13) : 71 dB (A) Compressed air connection: G 1" Bcqyzw2tik Dimensions and weight Length : 1270 mm Width :... more
|
|
1
Erlangen, Germany
6728 km
2018
as good as new (ex-display)
ALMIG dryer ALM2400 Technical specifications: Model: ALM2400 Medium: compressed air, free from aggressive components Flow rate: 36,7 m³ / min Operating pressure: 7 barg Pressure dew point: 3 ° C Bdnm2srt8d Compressed air connection: DN 100 Electric power supply: 400 V±10%/3/PE ; 460 V±10%/3/PE Frequency: 50/60 Hz Dimensions, weight Height: 2116 mm Width: 1243 mm Length: 1386 mm Weight: 690 kg more
|
|
1
Erlangen, Germany
6728 km
2018
as good as new (ex-display)
ALMIG dryer ALM150 Technical specifications: Model: ALM150 Medium: compressed air, free from aggressive components Flow rate: 2.33 m³ / min Operating pressure: 7 barg Pressure dew point: 3 ° C Compressed air connection: 1" Electric power supply: 230 V±10% / 1 Phase + N + PE Frequency: 50 Hz Dimensions, weight Height: 601 mm Niawz Width: 393 mm Length: 861 mm Weight: 50 kg more
|
|
8
Erlangen, Germany
6728 km
2018
as good as new (ex-display)
37 kW speedcontroled screwcompressor ALMIG V-Drive 37 The compressor is on stock, Immediately available Year 2018 Hours: 2 Technical specifications: type: V-Drive Possible operating pressures of the system: at 5 bar : 1,89 to 7,54 m³/min at 6 bar : 1,87 to 7,02 m³/min at 7 bar : 1,86 to 7,01 m³/min at 8 bar : 1,84 to 6,21 m³/min at 9 bar : 1,83 to 5,79 m³/min at 10 bar : 1,81 to 5,58 m³/min at 11 bar : 1,80 to 5,24 m³/min at 12 bar : 1,78 to 4,93 m³/min at 13 bar : 1,77 bis... more
|
|
6
Erlangen, Germany
6728 km
2018
as good as new (ex-display)
Exhibit, available immediately: Frequency-controlled 37 kW screw compressor ALMIG Variable 37 Year: 2018 Operating hours: 11 Bh Technical specifications Type: Variable XP 37 Possible overpressures of the plant (infinitely adjustable): 5 - 13 bar Delivery quantity at minimum / maximum speed, measured according to ISO 1217 appendix C at 5 bar (ue): 1.55 to 6.73 m³ / min at 6 bar (ue): 1.54 to 6.67 m³ / min at 7 bar (ue): 1.54 to 6.60 m³ / min at 8 bar (ue): 1.53 to 6.30 m³ / min ... more
|
|
6
Erlangen, Germany
6728 km
2011
good (used)
Used Almig refrigeration dryer ALM 740 Year of construction 2011 Bdp3vbl9j2 Technical specifications: Model: ALM 740 Medium: compressed air, free from aggressive components Flow rate: 680 m³ / h * (11.33 m³ / min) Operating pressure: 7 barü Operating pressure max. : 16 bar Compressed air temperature inlet: 35 ° C Compressed air temperature inlet max. : 49 ° C Ambient temperature: 25 ° C Ambient temperature max. : 43 ° C Ambient temperature min. : 4 ° C Pressure dew point: +3 ° C C... more
|
|
1
Erlangen, Germany
6728 km
2018
as good as new (ex-display)
Speedcontroled screwcompressor ALMIG VARIABLE 65 LK The compressor is on stock, Immediately available Year 2018 Hours: 3 Special equipments: -controller: AIR CONTROL PREMIUM -High-performance intake filter -Extra motor lubrication (for installation in a warm environment) - Technical specifications: type: VARIABLE 65 LK Possible operating pressures of the system: at 5 bar : 2,27 to 11,01 m³/min at 6 bar : 2,25 to 10,87 m³/min at 7 bar : 2,23 to 10,73 m³/min at 8 bar : 2,... more
|
|
9
Erlangen, Germany
6728 km
2019
as good as new (ex-display)
Screw compressor ALMIG BELT XP 11 - 10 bar (air cooled) Year 2019 / IMMEDIATELY AVAILABLE! Warranty: 60 months (upon completion ALMiG AIRCARE) Technical specifications Type: BELT XP 11 Operating pressure: 10 bar (ue) Delivery quantity, according to ISO 1217 Annex C: 1.55 m³ / min Degree of protection / insulation class drive motor: IP 55 / ISO F Rated power drive motor: 11 kW Operating voltage / frequency: 400/50 V / Hz Sound pressure level (DIN 45635 T.13): 66 dB (A) Length: 800 ... more
|
|
7
Erlangen, Germany
6728 km
2019
as good as new (ex-display)
ALMIG dryer ALM1530 Beekghkg8y Technical specifications: Model: ALM1530 Medium: compressed air, free from aggressive components Flow rate: 23.33 m³ / min Operating pressure: 7 barg Pressure dew point: 3 ° C Compressed air connection: 2 1/2" Electric power supply: 400 V±10%/3/PE ; 460 V±10%/3/PE Frequency: 50/60 Hz Dimensions, weight Height: 1510mm Width: 1129 mm Length: 857 mm Weight: 327 kg more
|
|
4
Erlangen, Germany
6728 km
2008
good (used)
Used 100 kW speedcontroled screwcompressor ALMIG Variable 90 Year 2008 Hours: 22428 h good condition, available immediately. Technical specifications: type: Variable 90 Possible operating pressures of the system: at 5 bar : 4,41 to 19,26 m³/min at 6 bar : 4,30 to 18,00 m³/min at 7 bar : 4,30 bis 16,85 m³/min at 8 bar : 4,20 to 15,75 m³/min at 9 bar : 4,09 to 14,85 m³/min at 10 bar : 3,99 to 14,14 m³/min at 11 bar : 3,88 to 13,44 m³/min at 12 bar : 3,78 to 12,81 m³/min ... more
|
|
7
Erlangen, Germany
6728 km
2018
as good as new (ex-display)
Screw compressor ALMIG BELT XP 30 - 10 bar (air cooled) Year 2018 / IMMEDIATELY AVAILABLE! Warranty: 60 months (upon completion ALMiG AIRCARE) Technical specifications Type: BELT XP 30 Operating pressure: 10 bar (ue) Delivery quantity, according to ISO 1217 Annex C: 4,50 m³ / min Degree of protection / insulation class drive motor: IP 55 / ISO F Rated power drive motor: 30 kW Operating voltage / frequency: 400/50 V / Hz Sound pressure level (DIN 45635 T.13): 73 dB (A) Length: 1350... more
|
|
3
Erlangen, Germany
6728 km
2018
as good as new (ex-display)
Speedcontroled screwcompressor ALMIG VARIABLE 55 LK The compressor is on stock, Immediately available Year 2018 Hours: 3 Special equipments: -controller: AIR CONTROL PREMIUM -High-performance intake filter -Extra motor lubrication (for installation in a warm environment) - Technical specifications: type: VARIABLE 55 LK Possible operating pressures of the system: at 5 bar : 2,27 to 10,58 m³/min at 6 bar : 2,25 to 10,54 m³/min at 7 bar : 2,22 to 9,98 m³/min at 8 bar : 2,2... more
|
|
7
Erlangen, Germany
6728 km
2018
as good as new (ex-display)
direct-drive Screw compressor ALMIG GEAR XP 22 - 10 bar (air cooled) Bdsto7lxbe Year 2018 / IMMEDIATELY AVAILABLE! Warranty: 60 months (upon completion ALMiG AIRCARE) Technical specifications Type: GEAR XP 22 Operating pressure: 10 bar (ue) Delivery quantity, according to ISO 1217 Annex C: 3.20 m³ / min Degree of protection / insulation class drive motor: IP 55 / ISO F Rated power drive motor: 22 kW Operating voltage / frequency: 400/50 V / Hz Sound pressure level (DIN 45635 T.13)... more
|
|
4
Erlangen, Germany
6728 km
2017
as good as new (ex-display)
ALMIG FLEX 16 PLUS speed controled screw compressor with dryer The compressor is in stock immediately available technical datas: effective volume flow min/max (acc. to ISO 1217 / Annex C) 5 bar: 1,42 - 2,89 m³/min 6 bar: 1,40 - 2,87 m³/min 8 bar: 1,37 - 2,57 m³/min Bcopq2ykco 10 bar: 1,34 - 2,15 m³/min 13 bar: 1,31 - 1,46 m³/min compressed air outlet: G 1 dimensions ( l x w x h ) 1140 x 890 x 1655 mm weight: 355 kg type: FLEX 16 Plus more
|
|
3
Erlangen, Germany
6728 km
2018
as good as new (ex-display)
Energy-saving cold storage dryer ALMIG ALM-E 280 Bdsuazsita Technical specifications: Model: ALM-E280 Medium: compressed air, free from aggressive components Volume flow: 4.25 m³ / min Operating pressure: 7 barg Pressure dew point: 3 ° C Compressed air connection: 2 " Electrical power supply: 230 V ± 10% / 1 phase + N + PE Line input: 0 to 0.59 kW Frequency: 50 Hz Dimensions, weight Height: 761 mm Width: 404 mm Depth: 861 mm Weight: 81kg more
|
|
1
Erlangen, Germany
dealership location
6728 km
2018
as good as new (ex-display)
Almig speed-controlled screw compressor system Flex 15 Receiver plus with integrated refrigerant dryer and 2 x 70 liter compressed air tank latest production Technical specifications Ca2zz0kv Type: Flex 15 Receiver plus Delivery quantity, according to ISO 1217 Annex C, min / max: 0.53 / 2.07 m³ / min Installed engine power: 15.0 kW Sound pressure level (DIN 45635 T.13): 62 dB (A) Including cold dryer SD15 Including 2 x 70 liter compressed air tank Compressed air connection: G 1 " more
|
|
1
Erlangen, Germany
dealership location
6728 km
2018
new
New screwcompressor ALMIG COMBI 22 - 10 bar Year 2017 This compressor is on stock. Immediately available ! Hours: 1 h Technical specifications: type: COMBI 22 - 10 bar Operating pressure: 10 bar : 2,75 m³/min Installed power: 22 kW Bbbmhtonhs Protection class / Insulation class Drive motor: IP55 / ISO F Operating voltage / frequency: 400/50 V/Hz Sound pressure level at 100 % load (DIN 45635 T13) : 72 dB (A) Compressed air connection: 1 " Dimensions and weight Length : 148... more
|
|
2
Erlangen, Germany
dealership location
6728 km
2017
new
Screw compressor ALMIG Dental screwcompressor oilfree, silent MADE IN GERMANY Year of construction: 2017 Warranty Terms: 12 months technical spezifications: type: SCROLL 4 Cfksqsfu Maximum operating pressure: 8 bar Delivery quantity at 8 bar : 410 l/min Installed power: 3,7 kW Protection class / Insulation class Drive motor: IP 55 / F Operating voltage / frequency: 400/50 V / Hz Sound pressure level (DIN 45635 T13) : 56 dB (A) Compressed air connection: G 1/2" Dimensions and weight Length : ... more
|
|
1
Erlangen, Germany
dealership location
6728 km
2018
new
New Speed-controlled, oil free, water injected screw compressor ALMIG LENTO 55 LK Year of construction: 2018 Warranty Terms: 12 months technical spezifications: type: LENTO 55 WK Possible operating pressures of the system: Delivery quantity at minimum / maximum speed at 5 bar (ue) : 2,10 / 8,17 m³/min at 6 bar (ue) : 2,04 / 8,02 m³/min at 7 bar (ue) : 1,98 / 7,88 m³/min at 8 bar (ue) : 1,91 / 7,73 m³/min at 9 bar (ue) : 1,85 / 7,21 m³/min at 10 bar (ue) : 1,79 / 6,77 m³/min Installed power:... more
|
|
1
Erlangen, Germany
dealership location
6728 km
2018
new
New ALMIG Belt 7 oil-injected screw compressor. Wztjtg9yr Pressure: 8 bar Rated power: 7,5 kW Delivery quantity: 1200 liters / min Sound level: 67 dB (A) Compressed air output: 3/4 " Dimensions Length x Width x Height: 1020 x 700 x 930 mm Weight: 230 kg more
|
|
2
Erlangen, Germany
dealership location
6728 km
2017
new
New speed controlled ALMIG LENTO 15 LK screwcompressor oilfree, compressor is on stock Immediately available. Controller: Air Control HE Technical specifications Oclawhxd Type: LENTO 15LK Possible overpressures of the compressor: (infinitely adjustable): 5 to 10 bar Delivery quantity at minimum / maximum speed: at 5 bar min/max : 1,03 to 2,64 m³/min at 6 bar min/max : 1,00 to 2,42 m³/min at 7 bar min/max : 0,97 to 2,20 m³/min at 8 bar min/max : 0,93 to 2,03 m³/min at 9 bar min/max : 0,90 to 1,... more
|
|
4
Erlangen, Germany
dealership location
6728 km
2018
new
ALMIg Dryer ALM 65 Air flow: 60 m³/h Air flow: 1,00 m³/min Ehdgvjf absorbed power: 0,34 kW Air Connections: BSPP-F 3/4" Pressure Dew Point (°C): + 3 ambient Temperature: 4 to 43 ° C compressed air inlet Temperature max: 49 ° C Weight: 29 kg more
|
|
3
Erlangen, Germany
dealership location
6728 km
2017
new
New screwcompressor ALMIG G-Drive 37 - 10 bar Year 2017 This compressor is on stock. Immediately available ! Hours: 2 h Technical specifications: type: G-Drive 37 - 10 bar Operating pressure: 10 bar : 5,72 m³/min Ptlo0m Installed power: 37 kW Protection class / Insulation class Drive motor: IP55 / ISO F Operating voltage / frequency: 400/50 V/Hz Sound pressure level at 100 % load (DIN 45635 T13) : 70 dB (A) Compressed air connection: 1 1/2" Dimensions and weight Length : ... more
|
|
1
Erlangen, Germany
dealership location
6728 km
2018
new
New screwcompressor ALMIG COMBI 15 - 10 bar Year 2018 This compressor is on stock. Immediately available ! Hours: 1 h Technical specifications: type: COMBI 15 - 10 bar Operating pressure: 10 bar : 1,86 m³/min Installed power: 15 kW Protection class / Insulation class Drive motor: IP55 / ISO F Operating voltage / frequency: 400/50 V/Hz Sound pressure level at 100 % load (DIN 45635 T13) : 72 dB (A) Compressed air connection: 3/4 " F3wsghoec Dimensions and weight Length : 11... more
|
|
1
Erlangen, Germany
dealership location
6728 km
2018
new
Almig screw compressor system Combi 22/500 D - 10 bar with integrated dryer and 500 liter compressed air tank Year of construction 2018 Technical specifications Type: Combi 22 / 500D Maximum final pressure, optionally: 10 bar (ue) Delivery quantity, according to ISO 1217 Annex C, at 10 bar (ue): 2.75 m³ / min Installed engine power: 22.0 kW Speed of drive motor: 3000 1 / min Dvgkuhj Degree of protection / insulation class Drive motor: IP 55 / F Efficiency class: IE 3 Operating volta... more
|
|
1
Erlangen, Germany
dealership location
6728 km
2018
as good as new (ex-display)
New screwcompressor ALMIG COMBI 11 - 10 bar Year 2018 This compressor is on stock. Immediately available ! Hours: 1 h Technical specifications: type: COMBI 11 - 10 bar Operating pressure: 10 bar : 1,43 m³/min Installed power: 11 kW Protection class / Insulation class Drive motor: IP55 / ISO F Operating voltage / frequency: 400/50 V/Hz Sound pressure level : 64 dB (A) Compressed air connection: 3/4 " Ocq9nyhx Dimensions and weight Length : 1180 mm Width : 770 mm Height ... more
|
|
|
