Used Anchor Fastener for sale (965)

Condition: good (used), Screws, washers, stainless steel screws, VA screws, wood screws, hanger bolts, solar fasteners -Solar fasteners: Hanger bolts M10 x 300 with adapter plate -Type: M10 x 300 SW 7 fully assembled -Material: stainless steel V2A -Number: 103 solar fasteners available Gbjdpouqf Eqofx Amyol -Price: per 10 pieces / minimum order 10 pieces -Weight: 0.3 kg/piece (10 pieces 3 kg)

Condition: good (used), Quick-release clamp, quick-release chuck, drilling jig, machine vice, drill press vice Gbsdpob A R Ehjfx Amyel -Clamping surface: 65 x 35 mm -Clamping height: max. 40 mm Price: per piece -Quantity: 2 available -Dimensions: 120/80/H70 mm -Weight: 1.5 kg

Condition: good (used), Bosch cabinet equipment for anchor HIP/TEF The equipment is a Bosch own production carried out by HIP/TEF. The cabinet equipment was designed for anchors and is in good condition. If necessary, it may also be possible to convert the machine according to your own wishes. Manufacturer: HIP/TEF or Bosch Model: HiP/TEF12 Type: Cabinet unit, possibly for anchors Gbodpfx Amjhvmk Hsysl Voltage: 230 V Scope of supply: Cabinet device plus parts of the blue box (see pictures) Condition: used complete factory locker, large selection of storage platforms, pallet racks, shelf racks, paternosters. High-quality industrial machines, lathes, grinding machines, hand machines Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: new, Factory-new stainless steel transport container with anchor agitator Type: SLA1150RWA Volume: Approx. 1150L Gbjdpfx Asw Dy Ngemyjl Design: Vertical construction with forklift pockets Execution: Single-walled, min. 1.5mm wall thickness Material (media-contacting): 1.4301 stainless steel Surface: Satin finish outside, IIId inside Internal weld seams: Pickled, passivated, and brushed Operating pressure: Atmospheric Top cover: Central traverse with two hinged lid halves Bottom: Torispherical head with discharge groove Tank dimensions: Tank diameter: 1190mm Cylinder height: 1000mm Total height: 1300mm (plus agitator motor) Features: - Central traverse with two hinged lid halves, stainless steel perforated plates underneath the hinged lid as reach-in protection, bolted, removable - Tank mounted on a stainless steel transport base with forklift openings - DN50 disc valve outlet fitting DIN1185, seal EPDM - Nameplate Agitator: Central anchor agitator Manufacturer: Schwarzer Rührtechnik GmbH Type: SRTGMK/0.75-13 Power: 0.75KW Speed: 13 RPM Operating voltage: 3PH 400V Product-contacting material: 1.4301 stainless steel - Gearbox by Getriebebau NORD - Solid agitator shaft connected to the agitator motor with a sleeve coupling, removable - Agitator shaft balanced for smooth rotation within the speed range - Large-surface stainless steel anchor-style agitator, welded design, weld seams pickled, passivated, and brushed - Stainless steel flange with shaft seal, EPDM Agitator control: CEE plug switch on the tank, on/off switch, no-voltage release, emergency stop Fully prewired

Year of construction: 2025, condition: new, Brush ageing machine Valmec 600 Gsdegk T Etjpfx Amyebl working width 600 mm feed speed 4-12 m/min motor power 2 x 4kw two brushes in set, wire + tynex independent height adjustment of brushes power supply 400V machine new

Condition: new, Year of construction: 2025, Valmec Master 400 brush scaler working width 400 mm maximum working height 300 mm motors 2 x 3 kw conveyor belt with speed regulation on the inverter steel brush + tynex brush included suction pipes 2 x 100 mm independent height adjustment of aggregates dimensions: 1300x900x1600h mm Godogmm Saopfx Amysbl machine weight 500 kg

Condition: used, Year of construction: 1999, Fastener in two forms with 16 professional Godpfoc Nw Rajx Amyobl

Year of construction: 2025, condition: new, functionality: fully functional, Maximum stack + pallet weight: 1,200 kg Maximum paper size: 1,200 x 900 mm Minimum paper size: 560 x 360 mm Minimum opening width: 840 mm Maximum opening width: 1,600 mm Power: 9.5 kW Power supply: 380V three-phase 50 Hz Weight: 3,400 kg Dimensions: 2,700 x 2,200 x 2,200 mm Noise level: < 80 dB Gsdpfx Ajyztm Tjmyobl

Condition: used, Year of construction: 1990, functionality: fully functional, machine/vehicle number: D08L/7763, Offer Number: D08L/7763 Machinetype: straightening and cutting machine Make: HSH Type: for concrete anchors Constr. year: 1990 diameter range: 3-10 mm Gbodpfx Aswi Tc Djmysl cutting length: 10-200 mm Location: In our warehouse

Condition: new, carrying capacity per cantilever arm: 650 kg, shelf height: 4,000 mm, total length: 4,000 mm, total width: 1,480 mm, load capacity per stand: 1,950 kg, Specifications: Gedpfx Asy Rkgcemyjbl - H: approx. 400 cm - D: approx. 148 cm - L: approx. 400 cm - Cantilever arms: approx. 120 cm including 8 cm front deflector - Axis dimension: 130 cm - NEW, immediately available from stock. - 650 kg load capacity per arm - 1950 kg load capacity per upright - Uprights in RAL 7016. - Cantilever arms in RAL 3000 - Arms are hooked in. - Arms adjustable in 100 mm increments. - Levels: Base + 3 storage levels (4 storage levels) The uprights in this shelving set are prepared for possible conversion to double-sided use free of charge. For the advantages of a hooked cantilever arm, see illustrations. Shelf consists of: - 4 uprights, including base section approx. 400 cm, made of IPE180. - 12 cantilever arms, approx. 120 cm, made of 10 cm x 4 cm profile. - Includes all necessary fasteners and screws. Price: €1,995.00 net €2,374.05 gross You will receive an invoice with VAT. Accessories such as ground anchors, collision protection, etc. can also be purchased from us. Transport: Delivery is available upon request through our partner shipping company; costs depend on the zip code. Installation: Our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment if required. Our recommendation: Let us know your needs... We are happy to assist you with the implementation of your projects, from planning and ordering to installation.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: EAN0729389556525, total length: 137,000 mm, shelf height: 5,000 mm, number of shelf rows: 10, clear span: 3,300 mm, frame height: 5,000 mm, frame width: 1,100 mm, load per truss pair (max.): 3,250 kg, shelf length: 137,000 mm, support length: 3,300 mm, 2 single-row pallet racks + 4 double-row pallet racks, each 13.7 m long, 5 m high, 1.1 m deep. Each with 4 bays, 3.3 m wide, and 3 beam levels per bay. Shelf load capacity: 3,250 kg per level. Scope of delivery: - 50 frames (RM5011 - RAL5019), including base plates, shims, and fastening materials - 40 spacers/connectors for double rows (ZAbh20) - 200 floor anchors (ZZBA1210) - 240 individual beams (T33135 - RAL2008) - 10 impact guards/collision protectors (ZRS40901) - 10 load capacity signs (BSMcP) Frames are bolted, not pre-assembled. Shipping / Delivery: Godpfx Asyzl T Eomyebl - Maximum 20 working days after receipt of payment - Delivered free to construction/installation site - Unloading from truck to be carried out by the buyer using their own forklift - Deliveries are made throughout the entire territory of the Federal Republic of Germany (except islands); deliveries to EU countries are subject to individual agreement.

Condition: new, Year of construction: 2026, machine/vehicle number: EAN0729389556525, support length: 3,600 mm, shelf length: 11,200 mm, frame height: 4,500 mm, load per truss pair (max.): 3,000 kg, frame width: 1,100 mm, number of shelf rows: 1, 1 row of pallet racking (M45113615-3) Godpfsv Urchox Amyebl 11.2 m long, 4.5 m high, 1.1 m deep, 3 sections, each 3.6 m wide, each with 3 beam levels, compartment load capacity 3,000 kg. - 4 frames (RM4511 - RAL5019) - 8 base plates, spacer material, fastening material - 16 floor anchors (ZZBA1210) - 18 individual beams (T3615 - RAL2008) - 1 load capacity sign (BSMcP) Frames bolted, not pre-assembled Shipping / Delivery: - up to 20 working days after receipt of payment - free delivered to construction site / assembly location - Unloading from the truck is to be carried out by the buyer using their own lifting equipment - Deliveries are made throughout the Federal Republic of Germany, excluding islands! Deliveries to EU countries by individual agreement.

Condition: used, mileage: 110,000 km, power: 140 kW (190.35 HP), first registration: 11/2018, fuel type: diesel, overall weight: 3,200 kg, color: silver, gearing type: automatic, emission class: euro6, number of seats: 5, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, Vehicle number (for inquiries): 113 Mercedes-Benz Vito 119 CDI BLUTEC MIXTO LANG 1st hand Gbsdpfx Ametzudkoyel Paint code: * 9744 Paint color brilliant silver metallic Interior equipment: * VY2 fabric Tunja black Equipment: * A1N rear axle shaft make NEAPCO * CF7 Comfort suspension * CL1 Steering wheel adjustable for tilt and height * CL3 Leather steering wheel * CL4 Multifunction steering wheel with trip computer * CM2 Bumpers and add-on parts painted in body color * E07 Hill start assist * E34 Buffer battery for starting process * ED4 Non-woven battery 12 V 92 Ah * EL9 2-way loudspeakers front and rear * Radio with touchscreen * EZ7 Active Park Assist * F61 Interior mirror * F64 Electrically folding exterior mirrors * F66 Lockable glove compartment * F68 Heated and electrically adjustable exterior mirrors * FF1 Center console with storage compartment * FJ3 Double cup holder in center cockpit * FKB Estate car * FP4 Interior chrome package * FZ8 Comfort opening and closing with IR remote control * G42 7G-Tronic Plus * H00 Hot/cool air duct to passenger compartment * H12 Auxiliary hot water heater (WEBASTO) * H20 Heat-insulating glass all round * HH9 Semi-automatically controlled Tempmatic air conditioning system * HI1 Climate zone 1 (cold/comfort) * IB6 C447 Vito/V-Class series * IG5 Basic * IK0 Complete vehicle * IL1 Domestic (Germany) * IN2 Wheelbase 3200 mm, long overhang * J55 Seat belt warning device for front passenger seat * JA1 Warning lamp for wiper fluid level * JA6 Collision Prevention Assist * JA7 Blind Spot Assist * JF1 Rain sensor * JK3 Instrument cluster with pixel matrix display * JP2 Assistance package * JW4 Seat belt warning deactivation * JW5 Lane Keeping Assist * JW8 Attention Assist * JX2 Service interval 40,000 km * KB5 Main tank 70 liters * KD2 Exhaust system N1 approval * LA2 Driving light assistant * LC4 Comfort roof control unit * LD9 Interior light(s) in the rear * LE1 Adaptive brake light * LG2 LED Intelligent Light System * LG4 LED tail lights, brake lights and indicators * LX5 Europe * M40 Generator 14V/200A * MA6 Emission class Euro 6b N1 * MG4 OM651 DE 22 LA engine 140 kW (190 hp) * MG9 Generator management * MJ8 ECO start-stop function * MS1 Cruise control * MX0 BlueEFFICIENCY package * R21 Wheel size group 1 * RF1 Continental tires (10) * RG7 tires 225/55 R17 * RM7 Summer tires * RR6 Spare wheel with jack * RS7 Steel wheels 6.5 J x 17 * RY2 Tire pressure monitoring on front and rear axle, wireless * SA6 Passenger airbag * SB1 Comfort driver's seat * SB2 Comfort front passenger seat * SE4 Lumbar support for front passenger seat * SE5 Lumbar support for driver's seat * T14 Active hold-open device for sliding door * T70 Child safety lock on doors in passenger compartment * U73 Armrests for seating in the passenger compartment * US4 3-seater bench seat comfort 1st row, outer seat foldable * V20 Interior trim, top of load compartment panels * V23 Interior trim, upscale version * V36 Roof lining * V41 TPO plastic floor in passenger compartment * VH1 Rear grab handles * VV0 Welding nuts side wall for extensions * VV2 Load anchoring rail system * VV9 Fastening points in the roof frame * W16 Window front left, fixed in side wall/sliding door * W17 Window front right, fixed in side wall/sliding door * W65 Hec

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: EAN0729389556525, total length: 17,000 mm, shelf height: 3,500 mm, number of shelf rows: 2, load capacity: 9,000 kg, frame height: 3,500 mm, frame width: 1,100 mm, load per truss pair (max.): 3,000 kg, shelf length: 8,500 mm, support length: 2,700 mm, 2 rows of pallet racking (2 x M35112711-2) Each 8.5 m in length, 3.5 m in height, 1.1 m in depth, Each with 3 bays, 2.7 m wide, Each with 2 beam levels, shelf load capacity 3000 kg. - 8 frames (RM3511 - RAL5019) - 16 footplates, baseplates, fastening material - 32 floor anchors (ZZBA1210) - 24 individual beams (T27114 - RAL2008) - 0 impact protectors / collision guards (ZRS40901) - 2 load capacity signs (BSMcP) Frames are bolted, not pre-assembled. Gjdpfxjy Hkxds Amysbl Shipping / Delivery: - max. 20 working days after receipt of payment - Delivered free to site / installation location - Unloading from the truck is carried out by the buyer with their own lifting equipment - Deliveries are made within the entire territory of the Federal Republic of Germany; except islands! Deliveries to EU countries are made by individual agreement.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 2,600 mm with base section 1,000 mm 12 cantilevers with 1,000 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) Gjdpfx Ajd Tbbdomyobl - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per stand 1,800 kg - Base section and cantilevers with 1,000 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever racking: Screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights Height 4,160 mm with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm shelf length (spacing 1,300 mm) Gbedefdkb Tepfx Amysl Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Replacement parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. For outdoor installation, the load-bearing capacity is reduced by the wind and snow load. The base must be concrete, level and suitable for dowels and be able to bear the loads. The customer must check and ensure that the ground conditions and load-bearing capacity as well as any official approvals that may be required. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: like new (used), Year of construction: 2025, Cantilever racking with roof supports: Hot-dip galvanized bolt-together system Scope of delivery: 9 rack uprights, height 4,230 mm, with base plate, usable depth 1,200 mm 27 cantilever arms, usable depth 1,200 mm, with deflectors 9 roof supports with 1,500 mm cantilever, pre-drilled for on-site roof construction (*Without wood purlins and trapezoidal sheets for roof assembly) Including longitudinal and diagonal braces for 1,500 mm upright spacing Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reordering and extensions possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made from IPE sections - All components with hot-dip galvanized finish Gjdpfx Amsh R Taqjyebl - Load capacity per upright 2,700 kg plus roof, wind, and snow loads (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm 900 kg - Including roof supports (Maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, depth 1,200 mm with deflector = 4 storage levels vertically - Including longitudinal and diagonal bracing with 1,500 mm upright spacing - Rack length: 12,100 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Professional telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are exclusively produced in Germany. We offer reliable transport with prior notification before delivery. The goods are packaged for easy unloading. The installation surface must be concrete, level, suitable for anchoring, and capable of supporting the applied loads. The floor condition, load-bearing capacity, and any required official permits must be checked and ensured by the customer. The uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to occupational safety regulations, it is recommended that the uprights have at least a 500 mm overhang above the top storage level.

Condition: as good as new (ex-display), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 shelf uprights height 4,200 mm with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth Longitudinal and diagonal braces for 1,300 mm upright center distance (4,000 mm shelf length) Gedpemhhypefx Amyobl Fastening material (screws, nuts and washers) - (*Delivery or collection in approx. 1 - 2 weeks) - (*No damage to paintwork!) - (*No damaged components!) - (*Replacement parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Net price: € 1,990.00 plus VAT. Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Surface painted in RAL 7016 (anthracite) - Shelf height 4,200 mm - Load capacity per upright 2,200 kg - Foot section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 740 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. Delivery can be made in approx. 1 - 2 weeks after receipt of order. For outdoor installation, the load-bearing capacity is reduced by the wind and snow load. The surface must be concrete, level and suitable for dowels and must be able to bear the loads. The customer must check and ensure that the ground conditions and load-bearing capacity as well as any necessary official approvals are in place. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,500 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) Gbedpsmhh Dhofx Amyol - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,500 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 2,600 mm with foot section, 1,000 mm usable depth 12 cantilevers with 1,000 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 2,600 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone Gbodemhh Dzopfx Amyel - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,000 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) Gedpfx Asmhhx Ijmyebl - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 2,600 mm with foot section, 1,000 mm usable depth Gjdpfxomhhyas Amysbl 12 cantilevers with 1,000 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 2,600 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: Gbodod Tqalepfx Amyel 4 shelf uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm shelf length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2024, Cantilever rack double-sided used: Hot-dip galvanized screw system Scope of delivery: 4 double-sided shelf stands, height 4,160 mm with foot section 1,200 mm 24 cantilevers with 1,200 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Also available in larger quantities: 20 stands in stock) Detailed description: - Stable steel construction made of IPE profiles - Surface of all components hot-dip galvanized - Load capacity per stand side 2,250 kg - Load capacity per cantilever arm 750 kg - Cantilever arms height adjustable in 100 mm increments - 6 screwable cantilever arms per stand and 2 base sections with a depth of 1,200 mm, standard = 4 storage levels one above the other per side of the stand - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports. Gsdoh Ek Daepfx Amysbl

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,000 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Gjdomhh Anepfx Amyebl Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.