Used Anvil Substructure for sale (304)

Condition: good (used), Year of construction: 1997, operating hours: 10,216 h, functionality: fully functional, turning diameter over cross slide: 200 mm, turning length: 300 mm, spindle bore: 32 mm, spindle speed (max.): 8,000 rpm, spindle speed (min.): 50 rpm, travel distance X-axis: 200 mm, travel distance Z-axis: 345 mm, spindle motor power: 11 W, rapid traverse X-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, rotational speed (min.): 50 rpm, rotational speed (max.): 8,000 rpm, feed length X-axis: 200 mm, feed length Z-axis: 300 mm, feed rate X-axis: 12 m/min, feed rate Z-axis: 12 m/min, type of input current: AC, torque: 73 Nm, swing diameter over bed slide: 445 mm, chuck outer diameter: 140 mm, spindle nose: DIN55026 Gr. 5, Equipment: documentation/manual, Due to restructuring measures, we are selling our Weiler DZ32 CNC lathe. - Year of manufacture: 1997 - Second owner (previously used in a training workshop) - Very good condition for its age - Very few operating hours - total running hours: 10,216 h - Siemens Sinumerik 820 (GA3) T control with C-axis - Max. turning diameter: 230 mm / max. turning length: 300 mm - Main spindle: 8,000 rpm - Counter spindle: 5,000 rpm - 3-jaw hydraulic chuck Röhm 140 mm for main spindle - Additional collet chuck for main spindle - Collet chuck for counter spindle - Drive power: 11.5 kW - Sauter tool holder with 16 driven tools (max. 4,000 rpm) - Tool holder size: VDI 20 - Chip collection tray (hydraulic) - With substructure for height adjustment - Fully functional - Many tool holders available, also with drive; these can be purchased depending on the price. - Complete operating and programming documents (German) Fedpfxszzcfpo Al Uepn - Spare parts and service available from Weiler - Machine can be inspected in our workshop while powered on This offer is non-binding. Subject to prior sale. No online sales. The sale is only to commercial customers after an on-site inspection and acceptance. Due to the age of the machine, the sale is made without any warranty. Pick-up only (EXW) - no shipping.

Condition: used, Year of construction: 2006, functionality: fully functional, power: 37 kW (50.31 HP), filter area: 169 m², total height: 5,950 mm, total length: 4,650 mm, total width: 2,250 mm, For sale is a complete industrial Aagaard/Finnrose dust extraction and filtration system, manufactured in 2006, from a wood processing facility. The system is designed as a screw filter and includes a complete dust extraction control system with heat recovery. The main fan is an Aagaard AVD 40 HF/240 with 37 kW. The filter system has approximately 169 m² of filter area with a total of 128 filter elements, each approximately 2,000 mm long and Ø 210 mm. The discharge is carried out via a discharge screw and a rotary valve airlock. Below the discharge is a matching hopper with approximately 6 m³ volume on a mobile trolley, which is included in the scope of supply. The complete control cabinet for the dust extraction control and heat recovery is part of the system. The control cabinet includes, among other things, the controls for the rotary valve airlock, discharge screw, and four cleaning groups, as well as a Schneider-Electric frequency inverter for the dust extraction fan. Technical data: Aagaard / Finnrose industrial dust extraction system / screw filter Year of manufacture: 2006 Main fan: Aagaard AVD 40 HF/240 Motor power main fan: 37 kW Filter area: approx. 169 m² Filter elements: 128 pieces Dimensions filter elements: approx. Length 2,000 mm / Ø 210 mm Electrical system: 3 × 400/230 V, 50 Hz Rated current control cabinet: 160 A Discharge via discharge screw and rotary valve airlock 4 cleaning groups Complete control cabinet for dust extraction control and heat recovery Frequency inverter for main fan Heat recovery / return air system available 6-m³ hopper on mobile trolley included Existing steel substructure can be taken over Extensive existing piping can be included by agreement Dimensions: Fsdpfx Asz Ik Atol Uspn Filter tower incl. rotary valve airlock: approx. 5,950 × 2,280 × 4,632 mm (L × W × H), height from steel substructure. Steel substructure: approx. 5,500 × 2,800 × 2,250 mm (L × W × H from the ground). Total height of filter tower incl. substructure: approx. 6,882 mm. Availability / Dismantling: Sale possible immediately. The system is located at CH-3608 Thun, Switzerland. The complete dismantling and removal must be completed no later than July 31, 2027. Dismantling, loading, transport, and any customs clearance will be carried out entirely by the buyer at his own cost and responsibility. All necessary skilled personnel, lifting equipment, cranes, and transport means must be organized by the buyer. Inspection possible by appointment. Sale from location in the existing condition. Technical specifications provided to the best of our knowledge, without guarantee; inspection by the buyer before purchase is recommended. Selling price: 29,500 EUR Price net, any statutory taxes and duties are additional. Export, customs clearance, and import duties are the responsibility of the buyer.

Condition: good (used), Year of construction: 2010, functionality: fully functional, operating hours: 15,996 h, input voltage: 400 V, overall weight: 6,750 kg, 1000 KN Max. stroke: 200 Weight: 6750 Noise level: 74 dB Year of manufacture: 07/2010 Voltage: 400 V / 50Hz Rated current: Current operating hours: 15,996 hours with manual angle measurement and correction system with safety laser UVV inspection on a regular basis / maintenance always carried out by Amada on a regular basis Accessories: Tool die: 2 pieces UKB 20.478 V8/12 30° 835mm 3 pieces UKB 20.344 V4/V7 88° 835mm Tool holder: 4 pieces UKB substructure for double V die 20.287 + 60.919 835mm Bending swords: 5 pieces UKB 10.261 H100 R0.6/90° 2 pieces UKB 11.158 H80 R0.6/30° 2 pieces UKB 11.200 H66 R0.8/90° Other: Fsdstwliwspfx Al Ujpn Light barrier in need of repair (new price approx. €4500) – separately as a replacement as an attachment (has been renewed) The machine can be inspected under power in DE84051 Mettenbach by appointment. Sale only to commercial customers and with exclusion of any warranty!

Condition: like new (used), anvil block for levelling of band saw blades, measures: 700 mm x 140 mm x 48 mm Fedpfx Asxtarwsl Uopn

Condition: ready for operation (used), Anvil & Stand Fjdpfxjzcqpys Al Uspn Length x Width x Height 1000x350x360 mm (dimensions of the anvil) Weight approx. 300 kg Errors and omissions excepted.

Condition: used, Powder coating booth with filter cart & fluidized bed For sale is a professional, industrial powder coating system from the traditional manufacturer Gema Volstatic. This is the proven MRS system (Multi-Recovery System), which ensures highly efficient powder recovery (overspray extraction) and clean working conditions in the workshop. The system is extremely robustly built and, thanks to the generous manual coating opening, is ideally suited for manual operation (hand coating). Technical data & connection values: • Manufacturer: Gema Volstatic AG • System / Type: MRS booth with filter cart and fluidized bed • Electrical connection: Voltage 3 x 380 V / 50 Hz (standard three-phase) • Compressed air connection (input pressure): min. 6 bar / max. 10 bar (recommended pressure: 7 bar) • Compressed air quality: Water vapor content max. 1.3 g/m³, oil content max. 0.1 ppm • Compressed air consumption (filter plate cleaning): max. 18 Nm³/h • Fan output of the cleaning unit: • For organic powders: Depending on the number of filter plates, from 7.5 kW to 15 kW (volume flow up to 12,000 m³/h) • For enamel powder: From 5.5 kW to 11 kW (volume flow up to 8,800 m³/h) • Fan differential pressure: 4.2 kPa (at 8000 m³/h) to 4.5 kPa (at 12000 m³/h) Dimensions & space requirements: • External dimensions of the booth: approx. Length 6.30 m × Width 2.52 m × Height 3.20 m • Internal dimensions of the booth (working area): approx. Length 6.00 m × Width 1.73 m • Dimensions of the platform: approx. Length 7.64 m × Width 2.45 m × Height 1.16 m Equipment & components: • Booth housing: Solid construction including booth inlet and booth substructure • Filter cart with fluidized bed: Excess powder is drawn downwards The fluidized bed converts the powder into a liquid-like state using compressed air, so that it can be directly reprocessed and reused in the cycle (enormous material savings!) • Cleaning unit: Unit mounted on top, including solenoid valve cover and sealing frame Fpedpfoz N Aivjx Al Uen • Safety & control: Integrated pressure monitoring and pneumatic monitoring via the side control unit • Ergonomics: Hand lever valve for easy control directly on the booth, large manual coating opening for the operator, and gun travel slots on the back • CO₂ fire suppression system (fire protection system) Item location: 48683 Ahaus / Ottenstein (Münsterland, North Rhine-Westphalia) Important collection & dismantling options (Please note): Option 1: Dismantling by the buyer The system must be professionally dismantled and transported away by the buyer on site. Option 2: Our "all-inclusive package" (dismantling by us) Alternatively, we will take over the complete, professional dismantling of the system for you. Fixed price for this: €7,500 net (plus VAT). "Everything from a single source: We would be happy to offer you suitable bank financing for your project." More items - new and used - can be found in our shop! International shipping costs on request!

Year of construction: 2008, operating hours: 3,200 h, condition: ready for operation (used), functionality: fully functional, Mag Impact 2400 VSI (Vertical Shaft Impact) crusher Year of manufacture: 2008 Only 3,200 operating hours 250 kW electric motor Maximum feed material size: 130 mm Rotor tip speed: 50 m/s Output product: 0–16 mm (with max. 8/12 mm) Capacity: 250–300 t/h (depending on material and target fraction) Includes support frame and complete electrical system BELT CONVEYORS NOT INCLUDED Includes two additional anvil rings, one of which is designed for double reinforced anvils Total assembly weight: 24,000 kg Crusher is 100% functional and ready for operation This VSI crusher offers the highest material reduction ratio for a 0–80 mm feed; the 0–4 mm fraction yield when processing limestone is nearly 50%! An ideal machine for producing fine aggregates (dust/powder) Fjdpfxsz H Rd Uo Al Uspn Full technical documentation and a certificate of origin are provided with the machine We also offer the widest range of spare parts in Poland for this type of machine (available in our other listings) as well as comprehensive post-warranty service!

Condition: like new (used), Year of construction: 2023, functionality: fully functional, Starting at the 82549 Königsdorf location, ATTEC offers an automated box storage system. The system was acquired in 2024 but has not yet been put into operation due to an order backlog. The new price of the system was €672,000 plus VAT. According to the documentation, the system's production started in 2023. The final installation was completed in 2026. The system has the following configuration: TECHNICAL DETAILS Storage type: Single-aisle storage, double-deep Total capacity: approx. 4,540 containers Permissible container weight: 30 kg per container Block on the picking side Rows: 46 Levels: 25 Storage locations for 120 mm boxes: 1,974 Storage locations for 170 mm boxes: 276 Block on the storage rear side Rows: 46 Levels: 25 Storage locations for 120 mm boxes: 2,020 Storage locations for 170 mm boxes: 276 Shelf stacker Type: AP 31 including double-deep infeed table Direction of movement: Horizontal Acceleration: max. 3.5 m/s² Speed: max. 3.5 m/s Box retrieval Pneumatic lowering device for containers: 1 unit Roller conveyor technology: approx. 4.5 m Pneumatic stopper, side: 1 unit Drive: 1 unit Electric drive with inverter: 1 unit Pneumatic drive: 2 units Emergency stop button: 1 unit Box storage Pneumatic lowering device for containers: 1 unit Roller conveyor technology: approx. 4.5 m RollerDrive element: 1 unit Pneumatic stopper, side: 1 unit Drive: 1 unit Control of the RollerDrive element: 1 unit Electric drive with inverter: 1 unit Pneumatic drive: 2 units Express retrieval Gravity roller track: 1.3 m Substructure for storage stiffening: 2 units Special retrieval RollerDrive element: 1 unit Substructure for storage stiffening: 2 units Control of the RollerDrive element: 1 unit Fodpfxsz I S Abe Al Ujpn Pick by Light workstation RollerDrive element: 1 unit Projector: 1 unit Superstructure for storage stiffening: 1 unit Control of the RollerDrive element: 1 unit Projector control: 1 unit The system is currently still powered and can be inspected by appointment. We will be happy to send you a data sheet of the system if you are interested. Dismantling, loading and transport are the responsibility of the buyer.

Condition: used, Anvil with round and pointed horn Anvil, North German design Track width: 140 mm Track length: 440 mm (with pointed horn) Fjdpfxozinw Hs Al Uepn Horn length, round horn: approx. 200 mm Horn length, pointed horn: approx. 200 mm Overall length: 630 mm Height: 285 mm Foot: 290 x 210 mm - Steel casting, hardened - Square hole approx. 28 mm for anvil tools - Round hole, approx. 28 mm diameter Dimensions (L x W x H): 630 x 290 x 285 mm Anvil weight: 95 kg Good condition, very bright tone, good quality.

Condition: used, Year of construction: 1987, functionality: fully functional, overall weight: 5,000 kg, total width: 960 mm, total length: 1,860 mm, total height: 2,160 mm, Pneumatic Forging Hammer MA4132 – 160 kg Heavy-duty pneumatic forging hammer, believed to be model MA4132, manufactured in the USSR. Fodpfx Aljzxd E Se Uopn The machine is complete with separate anvil/base and electric motor. Technical data: Falling parts weight: approx. 160 kg Main machine weight: approx. 3,700 kg Anvil/base weight: approx. 1,000 kg Electric motor weight: approx. 300 kg Total weight: approx. 5,000 kg Motor power: approx. 15 kW* Year of manufacture: believed to be 1987* Serial/identification marking on the machine: “87 №149” Location: Estonia Solid, heavy industrial forging hammer suitable for blacksmithing and forging work. The machine is sold as shown in the photos. Loading can be arranged by agreement. Inspection is possible by appointment. More photos and video available on request. *Some technical specifications and year of manufacture are based on identification of the machine as MA4132 and should be considered approximate.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 2278358, type of input current: AC, total height: 2,500 mm, total width: 3,000 mm, total length: 1,200 mm, overall weight: 900 kg, For sale is a SCHUNK Sonosystems LS-C 9 kW ultrasonic welding system in very good condition. The system was used exclusively for development and laboratory purposes and was not used in series production. Accordingly, the machine is in very good technical and optical condition and is almost like new. The LS-C is a universal ultrasonic welding system for joining copper and aluminum conductors with contact parts, busbars, and flat contacts. Due to its flexible system concept, it is particularly suitable for development departments, technical labs, prototype manufacturing, and small series applications. Technical data Manufacturer: SCHUNK Sonosystems GmbH Model: LS-C laboratory system Ultrasonic generator: 9 kW Frequency: 20 kHz Voltage supply: 3 × 400 V, 50/60 Hz Compressed air requirement: 6.5 bar Welding range: flexible Al conductors approx. 25–160 mm² and Cu conductors approx. 25–120 mm² (application-dependent) Equipment Dynamic process control Monitoring of welding height, energy, and welding time PC-based user interface with Windows system Memory for over 10,000 applications and process data sets Network capability and data export Soundproof enclosure Force sensor Universal anvil Welding pressure cylinder combination Ø 80 mm and Ø 125 mm Complete vibration system for 95 mm² Cu conductors Fpsdezzaxajpfx Al Usn Cable clamps and stranded wire end stop CE-compliant design Also included in the scope of delivery Tool set for 50 mm² conductors Tool set for 70 mm² conductors Condition The machine was used exclusively in development and laboratory operations and was not subjected to continuous production loads. Accordingly, the operating hours are low and the system is in very good condition. Application areas Development and prototype construction E-mobility and battery technology Cable assembly Laboratory and technical lab use Pre-series and small series production Inspection and functional demonstration possible by arrangement. Technical documentation and further images are available upon request.

Condition: used, mileage: 1 km, first registration: 01/1996, color: silver, driver cabin: other, gearing type: other, loading space length: 12,200 mm, loading space width: 26,900 mm, loading space height: 6,000 mm, Year of construction: 1996, Vehicle location: Bovenden. Structure: mobile exhibition hall, manufacturer WILLE, approximately 30m wide, approximately 20m deep, consisting of 2 container trailers, numbers 62732 and 62733, structural components, and accessories. Lightweight aluminum pavilion substructure in a semi-circular design, front side with plastic double-panel cladding, canvas roof covering, rear anchoring to the roof edges of the two semi-trailer units, partial seating, stage, partially rubber flooring, all documents available. For a more detailed description, please request it. Fpjdpoi Rnhaefx Al Ujn The hall had an original price of over 400,000 Euros. ACCESSORY INFORMATION WITHOUT GUARANTEE. Subject to changes, prior sale, and errors.

Condition: used, Anvil with round and square horn Standard anvil, Bohemian design Face width: 160 mm Face length: 530 mm Horn length: 250 mm Anvil weight: 190 kg Height: 350 mm Base: 430 x 310 mm - 28 mm square hole for anvil tools - Drop-forged, hardened Dimensions (L x W x H): 780 x 310 x 350 mm Anvil weight: 190 kg Fpedpfx Aoyk Hrmel Ujn Good condition, very bright ring, good quality

Condition: used, Anvil with round horn and rectangular horn Northern German style anvil Face width: 130 mm Face length: 630 mm (with pointed horn) Fsdpfx Aloy Ehyce Ujpn Round horn length: approx. 200 mm Pointed horn length: approx. 220 mm Overall length: 830 mm Height: 340 mm Foot with front anvil: 430 x 320 mm - Cast steel, hardened - Square hole approx. 28 mm for anvil tools - Round hole Ø approx. 23 mm Dimensions L x W x H: 830 x 320 x 340 mm Very bright ring, good quality

Condition: used, maximum load weight: 13,609 kg, overall weight: 16,000 kg, first registration: 01/2019, loading space length: 7,300 mm, loading space width: 2,480 mm, loading space height: 2,470 mm, loading space volume: 45 m³, total length: 7,450 mm, total width: 2,550 mm, total height: 2,750 mm, Year of construction: 2019, Container No. G0123027 – Manufacturer: Kögel. Fodpfx Aljz N Rcwo Ujpn * Sliding roof cover * Double corner brackets * Insert strip (wood) * Outline marking, side/rear * Load certificate, Code-XL * Multi-hole strip * Portal door with double rotating bar locks (inside) * Side sliding cover * Forklift-accessible * Fixed support legs * Device for rail loading * Lashing points * Perforated pallet stop strip Used roof cover. Financing available upon request. Financing possible. Storage container, weatherproof, secure closure, floor in good condition, no further repairs required. Delivery time: IMMEDIATELY. Multi-lock outer frame. Cover used. Technically ready for use, no further repairs required. Substructure with signs of use. Valid safety inspection certificate. Safety inspection documents available. Interchangeable container with lettering (see photos). LASI CODE XL!!! Dimensions are approximate. Offer subject to change; prior sale reserved. Prices are net, ex works D-59302 Oelde. Further details available upon request by phone or email.

Condition: used, maximum load weight: 13,609 kg, overall weight: 16,000 kg, first registration: 01/2018, loading space length: 7,300 mm, loading space width: 2,480 mm, loading space height: 2,470 mm, loading space volume: 45 m³, total length: 7,450 mm, total width: 2,550 mm, total height: 2,750 mm, Year of construction: 2018, Container No. G0123022 - Manufacturer: Kögel. * Sliding roof tarp Fjdpfx Aoz N Rc Dsl Uopn * Double corner brackets * Insert strip (wood) * Outline marking, side/rear * Load certificate Code-XL * Multi-hole strip * Portal door with double swivel rod locks (inside) * Side sliding tarp * Forklift accessible * Fixed support legs * Device for rail loading * Lashing points * Perforated pallet stop strip Used roof tarp. Financing available upon request. Financing possible. Delivery time: IMMEDIATELY. Multi-lock outer frame. Used tarp. Technically ready for use without further repairs. Substructure with signs of wear. Valid UVV certification. UVV documentation available. Swappable container with markings (see photos). LASI CODE XL!!! Dimensions are approximate. Offer subject to change; we reserve the right to sell in the meantime. Prices are net, ex works D-59302 Oelde. Further details available upon request by telephone or email.

Condition: ready for operation (used), Year of construction: 2010, operating hours: 30,343 h, travel distance X-axis: 600 mm, controller manufacturer: SIEMENS, controller model: 840D, spindle speed (max.): 12,000 rpm, number of axes: 5, This 5-axis CHIRON Mill 2000 was manufactured in 2010. It features a Siemens 840D NC control and a robust main spindle motor by Siemens. The machine has a total of 3,129,425 tool changes, showcasing its efficiency in production. If you are looking to get high-quality machining capabilities, consider the CHIRON Mill 2000 vertical machining centre we have for sale. Contact us for further details. Fpedjz Eai Ropfx Al Uon - Operating Hours (Main Switch On): 67,030 h 12 min- Operating Hours (Machine Fully Switched On): 45,945 h 26 min- Operating Hours (Automatic Production Mode): 30,343 h 56 min- Main Spindle Running Hours: 18,096 h 58 min- Total Tool Changes: 3,129,425- NC Control Manufacturer: Siemens- NC Control Type: 840D- Main Spindle Manufacturer: Fa. Chiron- Main Spindle Motor Manufacturer: Siemens- Main Spindle Motor Type: 1 PM 6105-2 LZ 84-9 EM 1-Z- 4th Axis Manufacturer: Fa. Peiseler- 4th Axis Type: ZAS160- 4th Axis Counter Bearing: Peiseler GP MK3- 5th Axis Manufacturer: Fa. Peiseler- 5th Axis Type: ZAS160- 5th Axis Counter Bearing: Peiseler GP MK3 - Substructure (Base Frame) Manufacturer: Hamül- Substructure (Base Frame) Type: L- Machine Structure Manufacturer: Chiron- Hydraulics Manufacturer: FMB- Hydraulics Type: 3116265- Cooling Unit (Chiller) Manufacturer: Hyfra- Cooling Unit (Chiller) Type: VWK90-D0- Central Lubrication Manufacturer: SKF- Central Lubrication Type: KAF1-M-W-S3+924- Control Cabinet Cooler Manufacturer: Rittal- Control Cabinet Cooler Type: SK3304142- Extraction System Manufacturer: Umwelttechnik 99- Extraction System Type: LCF-3000- Fire Extinguishing System Manufacturer: Total Walther- Fire Extinguishing System Type: (UE-03)K8- Coolant System 2 Manufacturer: Bürener Maschinenfabrik- Coolant System 2 Type: 001300000170- Chip Conveyor Manufacturer: Knoll- Chip Conveyor Type: 750K-1150/- X-Axis Motor Manufacturer: Siemens- Tool Magazine Chain Motor Manufacturer: Siemens- Tool Magazine Chain Motor Type: 1 FT 6034-4 AK 71-3 EA 1- Tool Magazine Linear Motor Manufacturer: Siemens- Tool Magazine Linear Motor Type: 1 FK 7063-5 AF 71-1 EH 2- Chip Conveyor Screw Motor Manufacturer: Bauer- Chip Conveyor Screw Motor Type: BS04-71V/D06LA4

Year of construction: 1993, condition: used, functionality: fully functional, APV Rosista DELTA D2 Valve Manifold – 199 Double-Seat Valves Manufacturer: APV Rosista Model: DELTA D2 Valve Manifold Year of Manufacture: approx. 1993 Condition: used Application: Dairy Industry / Food Processing Total number of valves: 266 pcs. Double-seat valves: 199 pcs. Nominal sizes: DN65 / DN100 Composition of the valve manifold: - 84 pcs. APV Rosista DELTA D2 Double-Seat Valves – DN100 - 115 pcs. APV Rosista DELTA D2 Double-Seat Valves – DN65 Fpjdsz Ib T Ajpfx Al Uon - 67 pcs. pneumatically actuated APV shut-off valves - 4 pcs. Endress+Hauser Promag P magnetic-inductive flow meters - 4 pcs. Fischer & Porter flow meters - 7 pcs. APV centrifugal pumps - extensive stainless steel piping - pneumatic actuation of the valves - valve controls / pneumatic connections - complete stainless steel substructure In total, the valve manifold has 266 pneumatically actuated APV valves, including 199 APV DELTA D2 double-seat valves.

Condition: used, Year of construction: 2003, Filter area: 50 m² Exhaust connection: 300 mm D Dimensions: 1650 x 1580 x 3550 mm Weight: approx. 500 kg Substructure with discharge screw: Motor: 1.5 kW Briquette press Schuko C 800 - 2 Connection value: 3 kW Throughput: approx. 35 - 55 kg/h, depending on the material With extinguishing system Fpedpfx Ajzb N T Uol Uon Weight: approx. 1200 kg Storage location: Nattheim

Condition: used, maximum load weight: 13,150 kg, overall weight: 16,000 kg, first registration: 01/2019, loading space length: 7,300 mm, loading space width: 2,470 mm, loading space height: 2,490 mm, loading space volume: 44 m³, total length: 7,450 mm, total width: 2,550 mm, total height: 2,750 mm, Year of construction: 2019, Vehicle No. G0122151_2 - Manufacturer: Spier. * Outline marking on side/rear * Roller shutter door (aluminum) * Forklift accessible * Telescopic support legs * Device for rail loading * Lashing points Fpjdpfxoz Nu Hye Al Uon 3 rows of rod lashing rails. Financing available upon request. Financing possible. Smooth furniture floor. Interior lining with needle felt. Delivery time: IMMEDIATELY AVAILABLE. Furniture fittings. Newly painted. Technically ready for use, body and support legs newly painted. Substructure galvanized. Valid UVV (accident prevention regulations). UVV documents available. Interchangeable platform body newly painted in pure white (RAL 9010). PAINT NEW!!! Dimensions are approximate. Offer subject to change, prior sale reserved. Prices are net ex works D-59302 Oelde. Further details available upon request by telephone or email.

Condition: used, 1x steel cabinet with tool holders Tool holders SK 40 with milling cutters and drills with tightening bolts DIN 69872A M16 2x Allmatic vises 4x substructure for Allmatic vises Various milling cutters Various solid drills Various disc milling cutters 1x angular milling head with holder for Kessler spindle 2x large prism holders 2x small prism holders made of aluminum 2x radii for clamping pipes, R 235mm 2x radii for clamping pipes, R 271.5mm 4x clamping jaws for clamping plates or similar Fjdpfx Alsz Ar Ehj Uopn The total value was approximately 30,000.00 euros. Everything needed to fully equip a milling machine and start production immediately is offered here.

Condition: good (used), Year of construction: 2015, CNC milling machine, milling and engraving machine, MECANUMERIC, MECA EASY 1510 – used: Price ex works: €23,500 (net)! Manufacturer: MECANUMERIC Type: MECA EASY 1510 Year of manufacture: 2015, former DEMO MACHINE Three-axis milling machine in a flat-bed gantry design. Working travels X, Y, Z axes: 1,050 / 1,550 / 200 mm. Table frame and gantry: Designed as a solid, stress-free, fully welded steel structure, powder-coated. Heavy table substructure for mounting the vacuum table VAC-CAISSON, designed as a cassette, with air passage holes in a 10 mm grid. Feed rate: 300 mm/sec (18 m/min) in rapid traverse and feed mode! Guidance on rails, slide shoes with upstream ball screw. Transmission: Precision ball screws Ball screw on all axes Maintenance-free, brushless servo drive motors (750 W on X and Y, 300 W on Z) Repeat accuracy: +/- 0.025 mm Mechanical resolution: 0.0006 mm Numerical control: Mecanumeric CN 7000 ISO-G-Code Machine operation via a 10" touch screen display Complete documentation and CE declaration of conformity in accordance with the basic safety and health requirements of Vacuum table 1,020 x 1,500 mm Support/work table designed as a closed aluminum plate, on which vacuum passage holes are arranged in a 10 mm grid. The table is divided into 2 main areas, which can be switched on manually. Vacuum generation by one (1) two-stage high-performance vacuum side-channel compressor. Motor power 4.5 KW, suction capacity 320 m/hour, filter and silencer included. Due to the overall size and potential heat development, the pumps are housed outside the machine body. The electrical control and safety devices for the pump and valves are integrated in the machine control cabinet or on the control panel. Milling spindle HF40-ATC24 ENC Conversion Module APSG-A Vacuum generation by one (1) two-stage high-performance vacuum side-channel compressor. Motor power 4.5 KW, suction capacity 320 m/hour, filter and silencer included. Due to the overall size and potential heat development, the pumps are housed outside the machine body. The electrical control and safety devices for the pump and valves are integrated in the machine control cabinet or on the control panel. High-frequency motor milling spindle 4KW Power: 4KW Speed range: up to 24,000 rpm. Fast tool change with pneumatic ejection, ISO30 taper. Tool holder: Clamping diameter up to 2-16 mm. Cooling with compressed air 6 bar 20 m/h Converters and switching elements are included in this position. Safety enclosure for the machine Front with door and safety lock - Position PROTCHOC omitted - Preparation of the electrical control and switching elements as well as the output socket for a high-performance industrial vacuum cleaner. Changer CH 6 S Fpedpfx Alezbybio Usn Condition: good Available: immediately Location: Delmenhorst

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Filter surface area: 37 m² Filter unit dimensions (L × W × H): 1,520 × 1,520 × 1,900 mm Inlet pressure: 6 bar Operating pressure: 4 bar Air consumption per regeneration cycle: 40 l at 6 bar Collection containers: 2 containers Volume per container: 243 l Total volume: 486 l Weight per container: 260 kg Fjdpfx Aljz Ei Szs Uepn Substructure dimensions (L × W × H): 1,600 × 1,750 × 1,500 mm with VacoVent750, power 7.5 kW, and 6,180 m³/h.

Condition: used, Year of construction: 2021, - Number of chambers: 3 - Volume per chamber: 90 m3 - Chamber size: 9.6x7.3x4.1 m - Final moisture content: 10 +/- 2% Drying chamber Manufacturer: BigonDry Fsdpfx Alezu Amas Uepn Type: Mod.LEM96.73.41 Year of manufacture: 2021 Technical data - Number of chambers: 3 - Volume per chamber: 90 m3 - Chamber size: 9.6x7.3x4.1 m - Overall chamber dimensions: 10.2x7.5x5.4 m - Type of hardwood - Final moisture content: 10 +/- 2% - Drying package: 4.5x1.2x1.2 m - Substructure: Aluminum - Wall insulation: Aluminum cassettes plus 100 mm glass wool - Sliding door: Aluminum plus 100 mm mineral wool - Front unloading - Ventilation: 900 mm - Ventilation power: 3 kW - Nominal air volume: 36000 m3/h - Hot water temperature: 90-95 C - Heating capacity: 380000-190000 kcal/h - Roof fans: 2+2 - Spray water pressure: 80 bar - Intermediate ceiling: Aluminum - Inspection doors - Wind resistance: 110 km/h - Snow load: 200 kg/m2 - Control system: Fully automatic control unit VENUS 2500-24F-PRO - Noise level: 68-70 dBA - Digital sensors - Total power: 18.5 kW - Power supply: 400v/50Hz Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, maximum load weight: 16,000 kg, overall weight: 16,000 kg, first registration: 01/2011, loading space length: 7,700 mm, loading space width: 2,470 mm, loading space height: 2,700 mm, loading space volume: 51 m³, total width: 2,550 mm, total height: 2,925 mm, Year of construction: 2011, Wagon no. G0116483_1- Manufacturer: Krone. * Double-decker equipment * Double-decker equipment * Single corner fittings * Contour marking side/rear * Load certificate Code-XL * Roll-up door (aluminum) * Keyhole system inside * Side walls with keyhole profile Fjdpoz A Rn Ssfx Al Uopn * Forklift accessible * Fixed support legs * Device for rail loading * Lashing options Financing on request. Financing possible. NEW paint finish: Color choice in RAL. color possible when ordering ! Long-term rental possible. Delivery time after consultation! Newly painted. Technically ready for use, body and support legs repainted. Substructure (KTL) cleaned and provided with underbody protection. UVV valid. UVV documents available. PAINT NEW !!!. LASI CODE XL !!!. Dimensions are approximate. Offer subject to prior sale, prices net ex location D-59302 Oelde. Further details on consultation by phone or mail: