Used Anvil Substructure for sale (309)

Condition: used, functionality: fully functional, power: 36.5 kW (49.63 HP), first registration: 10/2013, fuel type: diesel, fuel: diesel, operating hours: 3,574 h, Equipment: air conditioning, all wheel drive, car registration, differential lock, hydraulics, * 4-cylinder, 4-stroke diesel engine with 36.5 kW / 50 hp or 49.2 kW / 67 hp, water-cooled * 2,600 cc displacement * Permanent all-wheel drive via hydraulic wheel motors on each wheel Special paint finish RAL 9010 white Work package 1 Front lift including tow hitch CAT II / CAT I with passive tilt adjustment Rotating beacon Stabilizer bar Hydraulic set, flow divider 1 Flow divider, first circuit adjustable from 0–25 l/min with line set to the front and rear Return line to the front and rear Hydraulic set, flow divider 2 with tandem pump Flow divider, second circuit with tandem pump adjustable from 40–60 l/min line set to the front and rear return line to the front and rear leakage oil line to the front and rear Hydraulic tilting mechanism for superstructure frame Hydraulic set 1 consisting of: - 2 double-acting control valves with floating position - 4 quick couplings at the front - 2 quick couplings at the rear, connected via a T-piece with quick couplings at the front - Small joystick including floating position for front lift TIRE 31x10.5 R15 Overall outer width 120 cm, narrow, 140 cm wide when mounted Fender kit, narrow Multifunction joystick Flat roof Cabin mounted in the center Hydr. tilting mechanism for cabin Holder flatbed, complete with substructure Internal dimensions approx. 1250 x 1060 x 400 mm Flow divider automatic Rotating beacon, LED Work light, LED Red/white warning markings The following winter attachments can be purchased separately: Roller spreader with hydraulic drive RA-C 06/42, 940 mm tipping flatbed, combined (NEW), for sand, gravel, possibly salt rear light design as on the vehicle paint RAL 2011 roller width: approx. 940 mm spreading width: approx. 1250 mm weight (empty): approx. 220 kg Itedpfx Aszd Riuop Djn Spreading rate regulation adjustable via rotary knob in the cab proportional oil flow regulator, complete with cable and plug mounted on the spreader Semi-automatic, speed-dependent only applies in conjunction with item 2 deactivation of the roller when the vehicle stops Cable sets Control for spreader fill level Hummel front sweeper 145 cm working width hydraulic central drive – serial no. 980 Hummel MS-M1450HO front sweeper front lift CAT 1 central drive hydraulically via 3/4" chain dirt brush roller support feet 1 adjustable heavy-duty wheel in the center horizontal adjustment hydraulic pivoting hoses and couplings Subject to changes, printing errors, mistakes and prior sale. All information is provided without guarantee. The sale is made with the exclusion of any guarantee or warranty.

Condition: used, maximum load weight: 13,609 kg, overall weight: 16,000 kg, first registration: 01/2018, loading space length: 7,300 mm, loading space width: 2,480 mm, loading space height: 2,470 mm, loading space volume: 45 m³, total length: 7,450 mm, total width: 2,550 mm, total height: 2,750 mm, Year of construction: 2018, Container No. G0123022 - Manufacturer: Kögel. * Sliding roof tarp * Double corner brackets * Insert strip (wood) * Outline marking, side/rear * Load certificate Code-XL * Multi-hole strip * Portal door with double swivel rod locks (inside) * Side sliding tarp * Forklift accessible * Fixed support legs * Device for rail loading * Lashing points * Perforated pallet stop strip Itsdjz N Rc Dopfx Ap Dsn Used roof tarp. Financing available upon request. Financing possible. Delivery time: IMMEDIATELY. Multi-lock outer frame. Used tarp. Technically ready for use without further repairs. Substructure with signs of wear. Valid UVV certification. UVV documentation available. Swappable container with markings (see photos). LASI CODE XL!!! Dimensions are approximate. Offer subject to change; we reserve the right to sell in the meantime. Prices are net, ex works D-59302 Oelde. Further details available upon request by telephone or email.

Condition: used, maximum load weight: 13,150 kg, overall weight: 16,000 kg, first registration: 01/2019, loading space length: 7,300 mm, loading space width: 2,470 mm, loading space height: 2,490 mm, loading space volume: 44 m³, total length: 7,450 mm, total width: 2,550 mm, total height: 2,750 mm, Year of construction: 2019, Vehicle No. G0122151_2 - Manufacturer: Spier. * Outline marking on side/rear * Roller shutter door (aluminum) * Forklift accessible * Telescopic support legs * Device for rail loading * Lashing points 3 rows of rod lashing rails. Financing available upon request. Financing possible. Smooth furniture floor. Interior lining with needle felt. Delivery time: IMMEDIATELY AVAILABLE. Furniture fittings. Newly painted. Technically ready for use, body and support legs newly painted. Substructure galvanized. Valid UVV (accident prevention regulations). UVV documents available. Interchangeable platform body newly painted in pure white (RAL 9010). PAINT NEW!!! Iedpoz Nu Hyofx Ap Detn Dimensions are approximate. Offer subject to change, prior sale reserved. Prices are net ex works D-59302 Oelde. Further details available upon request by telephone or email.

Condition: excellent (used), functionality: fully functional, ERNST NAGEL Foldnak 8 (refurbished) !! In excellent condition / like new !! Saddle stitching machine for brochures up to 100 pages, 2 stitching heads for wire and booklet staples Stitching and folding in a single process, automatic triggering via photocells Magazine and misfeed control, counter, adjustable stapler anvils, wire and booklet staples in the same stitching head, format change in approx. 1 minute! Paper formats DIN A5, A4, A3, A3+, SRA3 (and any intermediate format) Brochure formats DIN A4, A5, A6 (and any intermediate format) 2 stitching heads with magazine control. No staple – no stitching. No adjustment for paper thickness required Staple types: wire staples Ri 26/6 Booklet staples 26/6, 26/8, 26/8S Production output up to 2,000 brochures/hour Connection: 230 V, 50 Hz, 300 W Weight: 109 kg / Dimensions in mm: H 870 x W 610 x D 1270 NAGEL TRIMMER / Front cutter processes everything that comes from the Foldnak 8. The pressing station before trimming ensures flat-lying brochures with a sharp fold; top-mounted conveyor belts ensure secure paper transport, even of "thick" brochures; adjustable belt advance ensures accurate alignment against the stop, even with brochures fed in at an angle; format change in 30 seconds. Brochure formats DIN A4, A5, A6 (and any intermediate format), min. 10 cm Weight: 160 kg Without a scale plate, only a collection tray is available. Itodpfx Apezmgm Uj Dsn

Condition: used, maximum load weight: 16,000 kg, overall weight: 16,000 kg, first registration: 01/2011, loading space length: 7,700 mm, loading space width: 2,470 mm, loading space height: 2,700 mm, loading space volume: 51 m³, total width: 2,550 mm, total height: 2,925 mm, Year of construction: 2011, Wagon no. G0116483_1- Manufacturer: Krone. * Double-decker equipment * Double-decker equipment * Single corner fittings Ijdpfxsz A Rn Sj Ap Dotn * Contour marking side/rear * Load certificate Code-XL * Roll-up door (aluminum) * Keyhole system inside * Side walls with keyhole profile * Forklift accessible * Fixed support legs * Device for rail loading * Lashing options Financing on request. Financing possible. NEW paint finish: Color choice in RAL. color possible when ordering ! Long-term rental possible. Delivery time after consultation! Newly painted. Technically ready for use, body and support legs repainted. Substructure (KTL) cleaned and provided with underbody protection. UVV valid. UVV documents available. PAINT NEW !!!. LASI CODE XL !!!. Dimensions are approximate. Offer subject to prior sale, prices net ex location D-59302 Oelde. Further details on consultation by phone or mail:

Condition: good (used), functionality: unexamined, Year of construction: 2000, Used impact crusher for the production of crushed rock and sand, feed size 20-100 mm, capacity approximately 40 cubic meters per hour, produces crushed rock and sand (approximately 50%), vibrating feeder at the crusher, 90 kW electric motor, steel substructure, discharge chute, V-belt guard. Wear parts are approximately 80% in good condition. Iedjzwt Uajpfx Ap Detn

Condition: used, maximum load weight: 12,000 kg, overall weight: 16,000 kg, first registration: 01/2009, loading space length: 8,690 mm, loading space width: 2,460 mm, loading space height: 2,400 mm, loading space volume: 51 m³, total width: 2,590 mm, total height: 2,750 mm, Year of construction: 2009, Vehicle No. G0106558_1 - Manufacturer: Krone. * Floor: Aluminum floor * Simple corner fittings * Electrical cable for refrigeration unit * Rear door design: Rear portal doors Itsdpfxjz A Rthj Ap Dsn * Refrigeration unit * Portal door with simple espagnolette locks (external) * Support legs fixed * Locking bars on rear doors: 2 * Tie-down rails New leak test. Rear portal/portal door with simple espagnolette locks/external made of stainless steel. Storage container wind and weatherproof, lockable, floor in good condition, no further repairs. Delivery time: IMMEDIATELY. Technically ready for use without further repairs. Test run down to -18°C OK! Substructure with signs of wear. UVV applicable. Mobile refrigerated storage unit. Dimensions are approximate. Offer subject to change without notice and prior sale. Prices net ex location, D-59302 Oelde. Further details are available by phone or email:

Condition: excellent (used), Year of construction: 1999, Arburg 420C 800-250 with the sprue picker anvil+long leg Year of construction: 1999 Injection unit: Screw diameter: 40 mm Injection weight: 158 g Injection pressure: 1390 bar Metering volume: 188 ccm Clamping unit : Clamping force: 80 t Distance between tie bars: 420x420 mm Size of the clamping platens: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA Itjdpfx Apoz Iq Ens Den Additional equipment: Euromap 12 Robot interface Control system with air valve Core pull control Hardened injection unit - bimetal Dimensions Weight: 3180 kg Length/width/height: 4.30x1.64x2.08 m Drive: Pumps/motor: 15 kW Heating output: 6.5 kW Total output: 21.5 kW All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Year of construction: 2007, condition: excellent (used), Heavy Load CHECKWEIGHER Manufacturer: Mettler Toledo Garvens GmbH Model: SL40 ID1+ Year of c.: 2007 Maximum load: 35000g weighing area 1-30 kg resolution d=5 g, accuracy from +/- 5 g output max. 40 weighings/min classification with 2 limits in 3 weight classes axis distance weighing belt 600 mm, width 400 mm weighing terminal ID 1 Plus, load cell LB60, without feeding/discharging belt, without sorting device transport height 700 mm +/- 50 mm Isdpefqpaasfx Ap Dotn belt speed adjustable 0-47 m/min working direction from right to left, substructure, stand and weighing terminal made of s/s narrow version with separate control and weighing terminmal prepared for wall installation zeroing light barrier electr. connection 230V/50/60Hz Transmission of measurement data via RS232C interface. Purchase, Acquisition, asset management of industrial equipment and machinery. Wide Range of Used Machinery, Industrial Equipment

Condition: used, For inquiries regarding the attachment, please contact Mr. Herden (available by phone at any time). Holp Profile Bucket / PL.140.170 / MS10 / 1,700 mm cutting width / HARDOX / NEW / in stock & immediately available Iodpfx Ajy T Uvgop Detn Price: €5,560.00 net / €6,616.40 gross - Excavators up to: 16 tons - Own weight approx.: 605 kg - SAE capacity: 686 liters - Cutting width: 1,700 mm - Back width: 1,100 mm - Bucket completely made of HARDOX (not just the cutting edge) Advantages of the Holp Profile Bucket: - No damage when rotating the bucket due to the chamfered corners - Optimal design due to numerous edges - Stable substructure - Minimal weight due to optimized design - Perfect material flow in the bucket - Advanced bucket base for optimal filling - Stable cutting edge made of Hardox 450 As soon as precision is required, the profile bucket delivers the right result in a single workflow: No other bucket models and profiles as precisely and brings comparable efficiency to the processing of your orders as this specially designed bucket. In our warehouse, we have a very large selection of various Holp products that are immediately available! Please contact us for this at / . Upon request, we will also be happy to provide you with a financing offer. We are an official Holp sales and service partner. We are an official Magni telescopic loader sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Westtech sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Holp range for you! Subject to errors and prior sale! = More information = New: Yes Intended use: Construction Unladen weight: 605 kg Please contact Marius Herden for further information.

Condition: excellent (used), Year of construction: 1980, functionality: fully functional, input voltage: 380 V, input frequency: 50 Hz, pressing force: 4 t, stroke length: 1,200 mm, oil tank capacity: 700 l, total height: 7,480 mm, overall weight: 78,500 kg, year of last overhaul: 2023, Equipment: documentation/manual, Oil-hydraulic forging hammer Lasco type KH 400 YOM 1980 Fully retrofitted and modernized 2023. Work impact: 4,000 mkg Fall height in normal dies: 1,200 mm Ram weight: 3,350 kg Length between the guiding light: 725 mm Iedezh Nchopfx Ap Detn Ram: 620 mm Motor power: 60 kW Weight of the anvil: 44,000 kg Total weight of the hammer: 78,500 kg Total height of the hammer: 7,480 mm Building height above floor level: 6,260 mm Oil tank capacity: 700 liters Piston rod Length: 500*2800 mm Rubber cushions: 90/2900*120 mm Operating voltage: 380 Volts Control voltage: 220 Volts Slowly ON: 0.62 m/min.

Condition: used, maximum load weight: 13,460 kg, overall weight: 16,000 kg, first registration: 01/2012, loading space length: 7,280 mm, loading space width: 2,480 mm, loading space height: 2,625 mm, loading space volume: 47 m³, total width: 2,550 mm, total height: 2,900 mm, Year of construction: 2012, Trailer No. G0123337_SAMPLE – Manufacturer: Krone. * Sliding roof tarpaulin * Double corner fittings * Contour marking on the side/rear Itodoz A Rtbspfx Ap Den * Load certificate Code-XL * Load certificate for beverages * Portal door with double rotating bar locks (internal) * Side sliding tarpaulin * Forklift accessible * Telescopic support legs * Device for rail loading * Lashing points Load securing certificate VDI 2700 / Load securing for beverages. Delivery time: AVAILABLE IMMEDIATELY. Multi Lock outer frame. New tarpaulin. Steel insertion slats with integrated combination lashing rail (slot/hole). Technically ready for use without further repairs. Partially painted. Substructure with signs of wear. Valid according to UVV (German accident prevention regulations). LASI CODE XL!!!. Available in multiple units! Dimensions are approximate. Offer subject to change; prior sale reserved. Prices are net, ex works D-59302 Oelde. Further details available upon request by phone or email.

Condition: used, maximum load weight: 13,609 kg, overall weight: 16,000 kg, first registration: 01/2018, loading space length: 7,300 mm, loading space width: 2,480 mm, loading space height: 2,470 mm, loading space volume: 45 m³, total length: 7,450 mm, total width: 2,550 mm, total height: 2,750 mm, Year of construction: 2018, Vehicle No. G0123017 – Manufacturer: Kögel. * Sliding roof cover * Double corner brackets Itedpfx Apsz Hhzwe Don * Insert strip (wood) * Outline marking, side/rear * Load certificate, Code-XL * Multi-hole strip * Side sliding cover * Forklift accessible * Fixed support legs * Device for rail loading * Lashing recesses * Perforated pallet stop strip Used roof cover. Financing possible. Storage container, weatherproof, secure closure, floor in good condition, no further repairs needed. Delivery time: IMMEDIATELY. Multi-lock outer frame. Technically ready for use, no further repairs needed. Partial paintwork. Substructure (KTL) coating with signs of wear. UVV certificate valid. UVV documents available. LASI CODE XL!!! Dimensions are approximate. Offer subject to change; prior sale reserved. Prices are net, ex works D-59302 Oelde. Further details available upon request by telephone or email.

Condition: good (used), axle configuration: 2 axles, first registration: 05/2021, loading space length: 6,600 mm, loading space width: 2,550 mm, loading space height: 950 mm, total length: 8,310 mm, total width: 2,550 mm, color: white, Year of construction: 2021, Mileage: 133,000 km Unladen weight: 4,620 kg Payload: 13,380 kg GVWR: 18,000 kg Body brand: WIESE TA 18 OK Technical condition: good Optical condition: good WIESE TA 18 OK – 2-AXLE TANDEM TRAILER – 18 TONS – TWISTLOCKS – SAF – AIR SUSPENSION GENERAL DATA Brand: WIESE Type: TA 18 OK Design: 2-axle tandem trailer First registration: 05/12/2021 Technical total weight: 18,000 kg Unladen weight: 4,620 kg Payload: approx. 13,380 kg Number of axles: 2 Axles: SAF Suspension: Air suspension Braking system: WABCO DESCRIPTION Very robust and versatile WIESE TA 18 OK 2-axle tandem trailer from 2021 with a technical total weight of 18,000 kg. The trailer is designed for professional and intensive use and features a fully galvanized chassis, aluminum side walls, twistlocks for container transport, SAF axles, and air suspension. With an unladen weight of only 4,620 kg, the trailer offers a payload of approximately 13,380 kg. Ideally suited for transport companies, construction companies, crane companies, machinery dealers, and for the transport of containers, machinery, building materials, and various heavy goods. CHASSIS & AXLES The WIESE trailer features a robust tandem design and is equipped with: * 2-axle tandem design * SAF axles * Air suspension Ijdpfx Apozy Eqfo Detn * WABCO braking system * Technical total weight 18,000 kg * Robust chassis for professional use * Fully galvanized construction * Very good corrosion protection * Easy-to-maintain design * Stable driving characteristics, even under heavy load The combination of SAF axles and air suspension ensures comfortable and stable driving characteristics. LOADING AREA & BODY The loading area is versatile and equipped with: * Aluminum side walls * Twistlocks for containers * Robust loading area * Galvanized substructure * Suitable for various transport tasks * Professional design for daily use Thanks to the integrated twistlocks, the trailer is ideally suited for the transport of corresponding containers and demountable bodies. The aluminum side walls also allow for the flexible transport of building materials, pallets, machines, and other goods. DIMENSIONS Length: approx. 6,600 mm Width: approx. 2,550 mm Loading height / Height: approx. 950 mm The low loading height of only approx. 950 mm ensures a favorable center of gravity and facilitates loading and unloading. STAINLESS STEEL TOOLBOXES The trailer is particularly well-equipped with: 4x stainless steel toolbox This provides ample protected storage space for, for example: * Lashing straps * Chains * Tie-down straps * Tools * Transport accessories * Container accessories The stainless steel design is durable, easy to clean, and ideal for daily professional use. SUPPORTS For safe and practical...

Condition: used, For inquiries regarding the attachment, please contact Mr. Herden (by phone at [phone number]). Holp Profile Bucket / PL.120.150 / MS08 / 1,500 mm cutting width / HARDOX / NEW / in stock & immediately available Price: €3,450.00 net / €4,105.50 gross - Excavator up to: 12 tons - Weight approx.: 450 kg - SAE capacity: 540 liters - Cutting width: 1,500 mm - Width: 900 mm - Bucket completely made of HARDOX (not just the cutting edge) Itjdpeyl Hfvofx Ap Dsn Advantages of the Holp Profile Bucket: - No damage when rotating the bucket due to the beveled corners - Optimal design through numerous edges - Stable substructure - Minimal weight due to optimized design - Perfect material flow in the bucket - Advanced bucket floor for optimal filling - Stable cutting edge made of Hardox 450 When precision is required, the profile bucket provides the perfect finish in a workflow: No other bucket models and profiles more precisely and delivers comparable efficiency in the processing of your orders than this specially designed bucket. We have many other Holp products in our warehouse that are immediately available! Please contact us at [phone number] / [email address] for further information. Upon request, we will also be happy to provide you with a financing offer. We are an official Holp sales and service partner. We are an official Magni telehandler sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official Westtech sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Holp range for you! Errors and prior sale excepted! = Further information = New: Yes Intended use: Construction Empty weight: 450 kg Please contact Marius Herden for more information.

Condition: used, For inquiries regarding the attachment, please contact Mr. Herden (at the phone number provided). Holp Profile Bucket / PL.080.140 / MS08 / 1,400 mm cutting width / HARDOX / NEW / in stock & immediately available Price: €2,600.00 net / €3,094.00 gross - Excavator up to: 10 tons - Own weight approx.: 305 kg - SAE capacity: 393 liters - Cutting width: 1,400 mm - Back width: 800 mm - Bucket made entirely of HARDOX (not just the cutting edge) Advantages of the Holp Profile Bucket: - No damage when rotating the bucket due to the beveled corners - Optimal design through numerous edges - Stable substructure Itsdey T Uupopfx Ap Dsn - Minimal weight due to optimized design - Perfect material flow in the bucket - Advanced bucket base for optimal filling - Stable cutting edge made of Hardox 450 When precision is required, the profile bucket delivers the right result in a workflow: No other bucket models and profiles more precisely and provides comparable efficiency in processing your orders than this specially designed bucket. We have a very large selection of various Holp products in our warehouse, which are immediately available! Please contact us for this at the phone numbers provided. Upon request, we will also be happy to provide you with a financing offer. We are an official Holp sales and service partner. We are an official Magni telehandler sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Westtech sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Holp range for you! Errors and prior sale are subject to change! = Further information = New: Yes Intended use: Construction Empty weight: 305 kg Please contact Marius Herden for further information.

Condition: used, For inquiries regarding the attachment, please contact Mr. Herden at [phone number]. Holp Profile Bucket / PL.080.140 / OQ45-5 / 1,400 mm cutting width / HARDOX / NEW / in stock & immediately available Price: €2,700.00 net / €3,213.00 gross - Excavators up to: 10 tons - Weight approx.: 305 kg - SAE capacity: 393 liters - Cutting width: 1,400 mm - Back width: 800 mm - Bucket made entirely of HARDOX (not just the cutting edge) Advantages of the Holp Profile Bucket: - No damage when rotating the bucket due to the beveled corners - Optimal design through numerous edges - Stable substructure - Minimal weight due to optimized design - Perfect material flow in the bucket Itjdpfx Aey T Uuvsp Den - Advanced bucket floor for optimal filling - Stable cutting edge made of Hardox 450 When precision is required, the profile bucket provides the right finish in a workflow: No other bucket models and profiles more precisely and delivers comparable efficiency in the processing of your orders than this specially designed bucket. We have a very large selection of various Holp products in our warehouse, which are immediately available! Simply contact us for this at [phone number] / [email address]. Upon request, we will also be happy to provide you with a financing offer. We are an official Holp sales and service partner. We are an official Magni telescopic handler sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Westtech sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply you with the complete Holp range! Errors and prior sale excepted! = Further Information = New: Yes Intended use: Construction Unladen weight: 305 kg Please contact Marius Herden for further information.

Condition: used, For inquiries regarding the attachment, please contact Mr. Herden (phone number available upon request). Holp Profile Bucket / PL.120.150 / OQ60-5 / 1,500 mm cutting width / HARDOX / NEW / in stock & immediately available Price: €3,740.00 net / €4,450.60 gross - Excavator up to: 12 tons - Weight approx.: 450 kg - SAE capacity: 540 liters - Cutting width: 1,500 mm - Width: 900 mm - Bucket made entirely of HARDOX (not just the cutting edge) Advantages of the Holp Profile Bucket: - No damage when rotating the bucket due to the beveled corners - Optimal design thanks to numerous edges - Stable substructure - Minimal weight due to optimized design - Perfect material flow in the bucket Itjdpey T Uvajfx Ap Don - Advanced bucket bottom for optimal filling - Stable cutting edge made of Hardox 450 When precision is required, the profile bucket delivers the right result in a streamlined workflow: No other bucket models and profiles with more precision and brings comparable efficiency to the processing of your orders as this specially developed bucket. We have a very large selection of various Holp products in our warehouse, which are immediately available! Please contact us for this at [phone number] / [email address]. Upon request, we will also be happy to provide you with a financing offer. We are an official Holp sales and service partner. We are an official Magni telehandler sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Westtech sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Holp range for you! Errors and prior sale excepted! = Further information = New: Yes Intended use: Construction Unladen weight: 450 kg Please contact Marius Herden for further information.

Condition: used, FARO Mobile 3D coordinate measuring arm / Portable CMM FARO Titanium Arm 2.4 m measuring range · Single Point 0.051 mm · Volumetric ±0.072 mm For sale is a used mobile 3D coordinate measuring arm from the manufacturer FARO. The measuring system is suitable for industrial measuring and testing tasks, quality assurance, component measurement, manufacturing metrology, and for general geometric measuring tasks. Technical data: Manufacturer: FARO Model: Titanium Arm Device type: Mobile 3D coordinate measuring arm / Portable CMM Date of manufacture: 06.12.2004 Revision: 21.0 Made in Switzerland Measuring range: 2.4 m Single Point: 0.051 mm Volumetric: ±0.072 mm Certification date according to nameplate: 07.06.2016 PLANOLITH granite measuring plate: Accuracy class: DIN 876/1 Permissible deviation: 0.022 mm Actual deviation: 0.00498 mm Test date: 03.11.2003 Weight of granite plate: approx. 460 kg Dimensions of measuring table: approx. 1200 × 800 × 940 mm (L × W × H) Total weight of measuring table: approx. 560 kg Iedpfx Apoz Hm Nge Detn Equipment: FARO Titanium Arm PLANOLITH granite measuring plate with substructure FARO transport case Measuring probe and measuring accessories as shown in the pictures Accessories case Magnetic clamping plate Connection cable FARO manuals and documentation Software and data carriers as shown in the pictures Further accessories as shown in the pictures Areas of application: 3D coordinate measurement Quality assurance Component measurement Component inspection Manufacturing metrology Tool and fixture construction Scope of supply: 1 × FARO Titanium Arm 3D coordinate measuring arm 1 × PLANOLITH granite measuring table with substructure Transport case, measuring accessories, documentation and accessories as shown in the pictures Condition: Used Optical condition as shown in the pictures Nameplates present The table shown in the photos and any other items not explicitly mentioned are not part of the sale. Shipping by freight forwarder is possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: used, maximum load weight: 12,640 kg, overall weight: 16,000 kg, first registration: 01/2011, loading space length: 7,670 mm, loading space width: 2,470 mm, loading space height: 2,700 mm, loading space volume: 51 m³, total width: 2,550 mm, total height: 2,925 mm, Year of construction: 2011, Vehicle No. G0123830_1 – Manufacturer: Krone. * Double-deck configuration * Simple corner fittings * Contour marking on side/rear * Load certificate Code-XL * Roll-up rear door (aluminum) * Keyhole system inside * Forklift accessible * Front wall recess Iedpfx Asz A Rqgep Detn * Fixed support legs * Device for rail loading * Lashing recesses * Lashing points Double-deck configuration without double-deck loading beams (available at an extra cost!). Delivery time: IMMEDIATELY. Technically ready for use, no further repairs required. Partially painted. Substructure with signs of use. Valid UVV certificate. LASI CODE XL!!!. Dimensions are approximate. Offer subject to change; we reserve the right to sell the item in the meantime. Prices are net, ex works D-59302 Oelde. Further details upon request, please contact us by phone or email.

Condition: used, maximum load weight: 13,609 kg, overall weight: 16,000 kg, first registration: 01/2017, loading space length: 7,300 mm, loading space width: 2,480 mm, loading space height: 2,470 mm, loading space volume: 45 m³, total length: 7,450 mm, total width: 2,550 mm, total height: 2,750 mm, Year of construction: 2017, Vehicle no. G0123015 – Manufacturer: Kögel. * Sliding roof tarpaulin * Insert strip (wood) * Outline marking, side/rear * Load certificate, Code-XL * Multi-hole strip * Portal door with double twist-lock fasteners (inside) * Side sliding tarpaulin * Forklift accessible * Fixed support legs * Device for rail loading * Lashing points * Perforated pallet stop strip Ijdpfsz Dmz Dex Ap Detn Used roof tarpaulin. Financing possible. Delivery time: AVAILABLE IMMEDIATELY. Multi Lock outer frame. Technically ready for operation without further repairs. Substructure (KTL) coating with signs of wear. Valid UVV certificate. UVV documents available. LASI CODE XL!!! Dimensions are approximate. Offer subject to change; prior sale reserved. Prices are net, ex works D-59302 Oelde. Further details available upon request by telephone or email.

Condition: used, maximum load weight: 13,609 kg, overall weight: 16,000 kg, first registration: 01/2017, loading space length: 7,300 mm, loading space width: 2,480 mm, loading space height: 2,470 mm, loading space volume: 45 m³, total length: 7,450 mm, total width: 2,550 mm, total height: 2,750 mm, Year of construction: 2017, Vehicle No. G0123016_1 – Manufacturer: Kögel. * Sliding roof tarp * Double corner brackets * Insertion bar (wood) * Outline marking on the side/rear * Load certificate, Code-XL * Multi-hole rail * Portal door with double swivel rod locks (inside) * Side sliding tarp * Forklift accessible * Fixed support legs * Device for rail loading * Lashing points * Perforated pallet stop rail Used roof tarp. Financing possible. Delivery time: IMMEDIATELY. Multi-Lock exterior frame. Technically ready for use without further repairs. Substructure (KTL) coating with signs of wear. Valid UVV certificate. UVV documents available. Dimensions are approximate. Offer subject to change; we reserve the right of prior sale. Prices are net, ex works D-59302 Oelde. Further details upon request, please contact us by phone or email. Iedpoz Dmzqofx Ap Dstn

Condition: used, Year of construction: 1961, Impact energy: 2040 Stroke: 660 mm Strokes per minute: 100/min Throat depth: 750 mm Distance between lower anvil and ram guide edge: 660 mm Drive power: 75.0 kW Itedpfezypd Njx Ap Djn Weight: 32 t Hammer weight: 16.5 t Anvil weight: 15.5 t Ram weight: 750 kg

Condition: used, maximum load weight: 12,660 kg, overall weight: 16,000 kg, first registration: 01/2014, loading space length: 7,300 mm, loading space width: 2,470 mm, loading space height: 2,720 mm, loading space volume: 49 m³, total length: 7,450 mm, total width: 2,550 mm, total height: 2,900 mm, Year of construction: 2014, Trailer No. G0113129_1 – Manufacturer: Krone. Itedpfxoz A Rqtj Ap Djn * Double-deck system * Simple corner fittings * Contour marking on the side/rear * Load certificate Code-XL * Roll-up rear door (aluminum) * Keyhole system inside * Forklift accessible * Telescopic support legs * System for rail loading * Lashing recesses * Lashing points Double-deck equipment without double-deck load beams (available at an extra charge!). Delivery time: IMMEDIATELY. Technically ready for use without further repairs. Partially painted. Substructure with signs of use, some surface rust. Valid UVV certificate. LASI CODE XL!!!. Dimensions are approximate. Offer subject to change; subject to prior sale. Prices are net, ex works D-59302 Oelde. Further details available upon request by telephone or email.

Condition: excellent (used), mileage: 285 km, power: 345 kW (469.07 HP), first registration: 05/2025, fuel type: diesel, tire size: 385/65-22,5, axle configuration: 6x2, wheelbase: 4,900 mm, fuel: diesel, fuel tank capacity: 510 l, color: white, driver cabin: sleeper cab, gearing type: automatic, suspension: steel-air, loading space length: 66,000 mm, loading space width: 24,700 mm, loading space height: 10,000 mm, Year of construction: 2025, Equipment: ABS, AdBlue, Bluetooth, EBS, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, navigation system, onboard computer, parking heater, power mirror, seat heater, soot filter, trailer coupling, - Aluminum fuel tank - Rear work lights - Heated exterior mirrors - Heated mirrors - Co-driver's seat - Differential lock - High beam headlights - Low noise - Speed limiter - Catalytic converter - Automatic climate control - Refrigerator - LED lighting - Air suspension - Air-suspended seats - Particle filter - PTO (Power Take-Off) - Radio/Multimedia system - Disc brakes - Sunroof - Sleeper cab - Seat heating - Sun visor - Lane keeping assist - Stability control - Auxiliary heater - Automatic heating system - Toolbox - Windshield - Additional steering axle Internal number for customer inquiries: 3-426 Volvo FH 460 6x2-4 construction tipper with Fassi or Palfinger loading crane, each with day registration. Immediately available, depending on crane type and size (subject to prior sale). Immediately available at a special price. Volvo FH 460 6x2-4 FH Globetrotter - Safety cab Long-haul version with a lower sleeping berth Engine 13 l, 469 hp / 345 kW, 2346 Nm, Euro 6 Stage E Automatic transmission I-Shift, 12-speed I-Shift driving mode: Standard, Performance and Economy VEB+ Volvo Engine Brake Suspension: leaf spring / air Tag axle, electro-hydraulically steered and liftable Tire size, front and tag axle: 385/65 R 22.5, drive axle: 315/80 R 22.5 Wheelbase 4,900 mm Trailer hitch ROCKINGER 400 G 150 Active Safety Package: ACC adaptive cruise control, driver alert system, lane change assist, lane keeping assist LED main headlights LED taillights Driver's seat, comfort, air-suspended, heated, seatbelt integrated in the seat Automatic climate control Itsdpfx Apjz Ilgyo Den Auxiliary heater Cool box with freezer compartment 33 l High instrument cluster with digital, fully dynamic driver information display, 4 views selectable Traffic sign recognition (in conjunction with LSS-DW (lane keeping assist)) Size: 12 inches with chrome trim Second driver information display, 9" touch color display and more Body: Modern construction pallet body Body dimensions L x W x H: 6600 x 2480 x 1000 mm Side boards, 1x divided (2 flaps) per side with side board release, including sliding folding steps Substructure: 45° perforated outer frame is designed as a steel welded structure. KTL & powder coated and/or hot-dip galvanized Lashing rail recessed in the center in the direction of travel 4x work lights 1x toolbox Loading crane: Fassi or Palfinger Various crane sizes / crane types and designs in stock. This is a non-binding offer. Subject to prior sale, errors and changes. General information Cab: Long-distance transport Technical information Number of cylinders: 6 Engine displacement: 12,777 cc GVWR: 26,000 kg Axle configuration Brakes: Disc brakes Front axle: Tire size: 385/65-22.5; Steered; Suspension: Leaf spring suspension Rear axle 1: Tire size: 315/80-22.5; Differential lock; Suspension: Air suspension Rear axle 2: Tire size: 385/65-22.5; Lift axle; Steered; Suspension: Air suspension Functional Crane: Rear of the chassis Body brand: PAVIC construction premium tipper with rear loading crane Condition Technical condition: very good...