Used Anvil Substructure for sale (261)

Condition: new, neu ca. 2 - 4 Wochen ab Auftr 3420 € 2000 x 1000 mm 850 mm 8000 kg 712 kg 200 mm 28 mm - Fully milled table top 25 mm in S355J2+N with high degree of accuracy (+/- 0.05 mm) and rounded edges and holes - Hard chrome-plated table surface Cr75 The main advantage of our tables compared to conventional systems is with the hard chrome plating Cr75, that this process achieves a much deeper penetration into the base material of up to 0.07 mm and the hardness of the surface reaches up to HV750. This also ensures optimum and lasting anti-spatter adhesion on the surface, which is one of the most efficient on the market. Kjdpfx Aowir A Nsb Sjll - Exact dimensional and fitting accuracy of the tools with 28 mm perforation (compatible with comparable premium suppliers) - Grid lines 100 x 100 mm - 4 solid table feet withload capacity 2 ton/feet and levelling option - Different foot variants available (standard, height-adjustable and with castors) - Load capacity 8 to - All-round 200 mm high side cheeks with diagonal perforation - 2-sided millimetre scaling - Substructure with stiffeners

Condition: new, neu ca. 2 - 4 Wochen ab Auftr 2860 € 1500 x 1000 mm 850 mm 8000 kg 541 kg 200 mm 28 mm * - Fully milled table top 25 mm in S355J2+N with high degree of accuracy (+/- 0.05 mm) and rounded edges and holes - Hard chrome-plated table surface Cr75 The main advantage of our tables compared to conventional systems is with the hard chrome plating Cr75, that this process achieves a much deeper penetration into the base material of up to 0.07 mm and the hardness of the surface reaches up to HV750. This also ensures optimum and lasting anti-spatter adhesion on the surface, which is one of the most efficient on the market. - Exact dimensional and fitting accuracy of the tools with 28 mm perforation (compatible with comparable premium suppliers) - Grid lines 100 x 100 mm Kodpfxjwirips Ab Soll - 4 solid table feet withload capacity 2 ton/feet and levelling option - Different foot variants available (standard, height-adjustable and with castors) - Load capacity 8 to - All-round 200 mm high side cheeks with diagonal perforation - 2-sided millimetre scaling - Substructure with stiffeners

Condition: new, neu ca. 2 - 4 Wochen ab Auftr 4400 € 2400 x 1200 mm 850 mm 8000 kg 945 kg 200 mm 28 mm - Fully milled table top 25 mm in S355J2+N with high degree of accuracy (+/- 0.05 mm) and rounded edges and holes - Hard chrome-plated table surface Cr75 The main advantage of our tables compared to conventional systems is with the hard chrome plating Cr75, that this process achieves a much deeper penetration into the base material of up to 0.07 mm and the hardness of the surface reaches up to HV750. This also ensures optimum and lasting anti-spatter adhesion on the surface, which is one of the most efficient on the market. - Exact dimensional and fitting accuracy of the tools with 28 mm perforation (compatible with comparable premium suppliers) - Grid lines 100 x 100 mm - 4 solid table feet withload capacity 2 ton/feet and levelling option - Different foot variants available (standard, height-adjustable and with castors) - Load capacity 8 to - All-round 200 mm high side cheeks with diagonal perforation - 2-sided millimetre scaling - Substructure with stiffeners Ksdpfxswiriis Ab Sjll

Condition: new, neu ca. 2 - 4 Wochen ab Auftr 6400 € 123.52 € 3000 x 1500 mm 850 mm 8000 kg 1544 kg 200 mm 28 mm - Fully milled table top 25 mm in S355J2+N with high degree of accuracy (+/- 0.05 mm) and rounded edges and holes - Hard chrome-plated table surface Cr75 The main advantage of our tables compared to conventional systems is with the hard chrome plating Cr75, that this process achieves a much deeper penetration into the base material of up to 0.07 mm and the hardness of the surface reaches up to HV750. This also ensures optimum and lasting anti-spatter adhesion on the surface, which is one of the most efficient on the market. - Exact dimensional and fitting accuracy of the tools with 28 mm perforation (compatible with comparable premium suppliers) - Grid lines 100 x 100 mm Kjdowiricspfx Ab Soll - 4 solid table feet withload capacity 2 ton/feet and levelling option - Different foot variants available (standard, height-adjustable and with castors) - Load capacity 8 to - All-round 200 mm high side cheeks with diagonal perforation - 2-sided millimetre scaling - Substructure with stiffeners

Condition: used, Vertical band saw PEHAKA type SM 4 make no. 27060 year of construction approx. 1980 throat 380 mm table size 620 x 480 mm cutting height 250 mm roller diameter 400 mm working height 1120 mm saw band length min. 2900 - max. 3100 mm saw band speed 22-125 m/min. infinitely variable Kodpoiv A U Eofx Ab Sjll motor power 0,6 / 0,75 kW mains connection 380 volt, 50 Hz - infinitely variable saw band speed via Vario belt drive with lever adjustment and 2 motor speeds - saw table tiltable +/- 15 - Saw blade butt welding machine IDEAL BS 0-16 - Saw blade shear - substructure made of U-steel 100 x 50 mm , movable with lift truck space requirement L x W x H 1050 x 800 x 1950 mm weight 355 kg good condition

Condition: used, Conveyor belt, belt conveyor, belt conveyor, belt conveyor MFP Fördertechnik Machine No: 20083 Year of manufacture: 2021 Usable length: 2800 mm Kodpfx Aswqg Enjb Sell Belt width: 360 mm Usable width: 300 mm Belt length: approx. 5800 mm Frame profile construction height: 70 mm Deflection roller diameter: 20 mm Belt speed: 10 m/min to 48 m/min Conveyor belt height: approx. 1150 mm Motor power: 140 Watt Power supply: 230 Volt, 50 Hz - Stepless belt speed via potentiometer on ROFRE frequency converter, type 897 - Right-left run - Belt drive via INTERROLL tube motor - Stable steel sheet construction with closed steel plate under the conveyor belt - 1 piece height-adjustable substructure with hand crank, conveyor belt height approx. 1000 to 1200 mm - Substructure mounted on steel plate length 500 mm x width 500 mm x thickness 30 mm - 1 piece fixed support foot without height adjustment as transport support - Fully mobile on fixed castors Overall dimensions L x W x H: 2880 x 500 x 1150 mm Weight: 200 kg good condition

Condition: used, Tool presetter GILDEMEISTER-DE VLIEG Type EGS 5045 / Microset DPS 100 Serial No. 83-10-102 Year of construction 2002 Travel distance X-axis approx. 400 mm Travel distance Z-axis approx. 400 mm Tool holder in mounted rotary table: Ø 50 mm Pitch circle diameter of the tool holders in the mounted rotary table Ø 340 mm Inner cone in the mounted rotary table Ø 245 mm Tool mounting plate as rotary table with 8 mounting holes Ø 50 mm Centering diameter of the mounted tool holder plate: Ø 102 mm Swivel-mounted flange holder with centering diameter: Ø 102 mm Swivel-mounted flange holder with outer diameter: Ø 155 mm Swivel-mounted flange holder with 3x M10 mounting holes, bolt circle: Ø 130 mm Mains connection 230 Volt, 50 Hz - Microset DPS 100 measuring electronics - Rotary table with 8 tool positions Kledpfxohbal Ds Ab Sjl - Interfaces: 1x RS232, 2x measuring system (X/Z) - Profile projector with screen Ø 100 mm magnification 20x and two circular screens - Fixed focusing screen with crosshairs - Axis movement via manual quick adjustment with pneumatic clamping - Fine adjustment via hand wheels - Rotatable rotary table with pneumatic clamping - Metal substructure with 3 drawers Space requirement L x W x H 1100 x 1000 x 800 mm Weight 400 kg good condition

Condition: used, Straightening and welding plate cast steel gray cast iron heavily ribbed Length 2000 mm Kedpfxsdzqq Uj Ab Ssll Width 1200 mm Thickness 150 mm Working height 800 mm Panel thickness 35 mm - Substructure made of solid wood Weight approx. 950 kg Good surface

Year of construction: 2013, condition: used, Decanter centrifuge for thickening municipal, industrial and biological sludge Additional title: Sludge dewatering system Ksdpfsw Tllkex Ab Sell Throughput capacity: 15 m³/h Weight: 545 kg Position: To be mounted on the customer's substructure Features: Operating platform

Condition: new, machine/vehicle number: 280261 0001, Features > CNC machine ready for mains connection Klodpfslnikkex Ab Sol > Low-noise due to maintenance-free servo motors > ergonomically slim design > powerful isel control with maintenance-free servo motors > reliable linear units with steel ball screws are installed as drives > effortless operation thanks to height-adjustable display > network-compatible control PC with WINDOWS > user-friendly soft-lift hood > clamping of the workpieces by means of T-slot plate options > milling spindle 500W - 1200W > Linear tool changing station > Tool cooling as cooling spray or air version (CoolMin) > Length measuring probe > Vacuum clamping table > Maintenance unit with valve terminal > Substructure table with swivel screen and integrated keyboard > Substructure table is used to install the vacuum pump, cooling unit and other peripheral devices > Automatic hood opening > Safety light curtain > Why buy? Simply finance. Talk to us! The iCV 4030 EC is a compact tabletop machine with a proven, optimized chassis design. A practical substructure table with monitor and integrated keyboard is available as an option. The CNC machine has a modular design; all control components, including the isel CNC control and the control computer, are installed at the rear and are easily accessible for servicing. All linear axes mounted in the machine are from the isel range; they run with linear ball bearings on ground precision steel shafts. Backlash-free ball screw drives with various spindle pitches are used as drives. The machine table made of face-milled T-slot profiles offers a wide range of clamping options for individual workpiece fixtures and clamping devices. The iCV 4030 EC is suitable for numerous areas of application and industries; experience has shown that it is preferably used for machining. A comprehensive range of accessories tailored to your application rounds off the program.

Condition: new, Metallkraft RB 54 mandrelless tube bending machine NC-controlled, with large program memory. NC control for setting the bending angle. High quality, robust construction Up to 50 programs can be stored Fast tool change Purely motorized drive Automatically returns to starting position TECHNICAL DATA: Bending radius max. 125mm Bending angle max. 210 Kodpjfdr Sajfx Ab Soll Bending speed(s) 2rpm Torque 2341Nm length (product) approx. 600mm width/depth (product) approx. 220mm Height (product) approx. 470mm Weight (net) approx. 107kg Bending capacity tube material 420 N/mm² (Ø x wall thickness) 54 x 4mm Bending capacity tube material 350 N/mm² (Ø x wall thickness) 54 x 4mm Bending capacity tube material 650 N/mm² (Ø x wall thickness) 42 x 3mm Power drive motor 1,1kW Supply voltage 400V Mains frequency 50Hz Note: Substructure optionally available

Condition: new, Metallkraft PRM 40 FH ring bending machine Can be used horizontally and vertically for profiles and tubes with foot operation. Heavy cast construction Hardened bending rollers Shafts made of special steel, hardened and ground Lateral straightening rolls, infinitely adjustable All 3 rolls driven by gears Horizontal and vertical working position Suitable for particularly small bending diameters Suitable for particularly small bending diameters due to orbitally adjustable lower rolls Mobile control panel with two digital displays for the infeed rolls Straightening rolls suitable for bending angle iron as standard special accessories: Tube bending rolls Angle bending rolls Special straightening rolls Klsdocf D Rbspfx Ab Sol Profile bending rolls Plastic rolls for soft materials Device for twisting bars Spiral bending tool TECHNICAL DATA: Length (product) approx. 1050mm width/depth (product) approx. 500mm height (product) approx. 1250mm Weight (net) approx. 350kg Bending power see data sheet Power drive motor 1,1kW Supply voltage 400V Mains frequency 50Hz Shaft diameter top 35mm Shaft diameter bottom 35mm roller diameter top 137mm roller diameter down 137mm Speed 7m/min SCOPE OF DELIVERY: Standard bending rolls digital displays for infeed rolls mobile control panel straightening rolls substructure

Condition: as good as new (ex-display), Year of construction: 2025, Complete solution for transporting bulk goods such as shredded goods, wood chips, wood pellets, granulate, etc. Aluminum angled conveyor incl. substructure horizontal range 2,500mm (adjustable) Rising range 5,000mm (customizable) Angle in the bend 35,40 or 45° Feed height: horizontal (individual) Discharge height individually adjustable Kledpfx Abji Igdfj Sel Construction: height adjustable ( to move) Conveyor belt width 500mm (customizable) We supply our conveyor belts in PVC, PU, felt or rubber. PU conveyor belt including cleats and corrugated edge Drive: Motor 1.1KW (adjustable), speed approx. 0.3m/sec Connection 220/240V, 50Hz protection class IP54 Drive etc. ready for connection, motor control optional 8x adjustable machine feet for alignment Wavy edge: 50x25mm T-50 lugs - 400mm pitch 2-layer particularly laterally stable Fixed overbelt magnetic separator: Permanent overbelt magnetic separator TYPE PM1200 Manufacturer: magnetprofis GmbH & Co. KG L x W x H: 1200 x 550 x 200mm Magnetic L: 700mm W: 250mm Gear motor: 0.37KW We always have various systems of this type in stock. The delivery time for an individual system is currently around 2-3 weeks, depending on the manufacturing effort. Our core competence lies in supplying the customer with exactly what he really needs. Together with our customers, we work out customer-specific, individual solutions and supply corresponding systems from our own production. Feel free to contact us by phone to find a suitable solution for your application. Conveyor belt, conveyor belt system, discharge belts, belt conveyor, magnetic separator, overbelt magnetic separator, recycling, wood chips, plastic, metal-free metal detection, neodymium, overbelt magnet, magnetic belt separator

Condition: new, Year of construction: 2025, machine/vehicle number: 2022042210, Aluminum angled conveyor belt with substructure Conveyor belt length: 1,500mm flat + 3,000mm rising Pitch angle in bend 45°C Height of the horizontal top edge approx. 200mm PVC conveyor belt Conveyor belt EM 15/2 0+17 PVC green Belt width 500mm 31 pcs. T40 studs welded - pitch 300mm * antistatic due to threads in the fabric on the underside endlessly welded with stepped finger connection 40mm sidewall high-frequency welded on both sides * edge-free zone on both sides for tape guidance in the incline Lateral arrangement: -70+35-5+280-5+35+70 Full-surface underlay sheet Drive: Motor approx. 1.1KW Belt speed approx. 0.3m/sec * optionally controllable with frequency converter Connection 220/400V, 50Hz protection class IP54 Kjdpfx Absh Ellze Ssll

Condition: new, empty load weight: 1,100 kg, maximum load weight: 2,400 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 5,090 mm, loading space width: 2,060 mm, loading space height: 2,060 mm, loading space volume: 22.5 m³, color: black, construction height: 2,420 mm, working width: 2,320 mm, Hydraulics, automatic reverse drive, hot-dip galvanized, unbraked, incl. aluminium body / side door / 100km/h / tailgate hinged door, * IMMEDIATELY AVAILABLE * incl. aluminium body / side door / 100km/h / tailgate hinged door Technical data: - Type: New vehicle - TÜV: New/2 years - Availability: IMMEDIATELY - Gross vehicle weight: 3.500kg - Unladen weight: 1,100 kg - Payload: 2,400 kg - Interior dimensions: 509 x 206 x 206 cm (L x W x H) - Overall exterior dimensions: 622 x 232 x 242 cm (L x W x H) - Loading sill height: 35 cm - Brake: yes - Support wheel: yes - Automatic - 100km/h: included! - incl. vehicle documents Vehicle body: - Floor: Anodized aluminium floor made of web profiles - Side walls/body: Aluminium anodized double-walled - Roof material: Full polyester - Chassis: Pullman2 independent suspension with coil spring and shock absorber - Number of lashing eyes: 8 pieces - Tailgate: Yes - Tailgate material: Aluminium anti-slip, approx. 1000kg load capacity - Tailgate function: Hinged door and tailgate combination - Interior light: Yes, with switch - Supports: at an extra charge - Overrun device & brakes: Incl. Frame/chassis: Welded hot-dip galvanized steel frame - Lighting plug: 13-pin - Approval: COC papers Standard equipment: - Double-walled and anodized aluminium side walls - Anodized aluminium floor - Lockable front right side door, approx. 127x60cm - Full poly roof and front - Rear load-through dimension: approx. 178x181 cm (W x H) - Inside width between the wheel arches: approx. 193 cm (W x H) - Drive-on flap made of aluminum with optional lock lockable - Drive-on flap as flap / door system (can be used as flap or door) - Reinforced substructure for drive-on flap - Lashing eyes mounted on floor - Interior light - Torsion-resistant chassis - Stable cross members thus high point load - PULLMAN2 chassis Independent wheel suspension with trailing arm, coil spring and shock absorber lowered with very low centre of gravity and galvanized - 100km/h with manufacturer's certificate - automatic reversing - Knott overrun device and parking brake - sturdy V-drawbar - plastic mudguards - 13-pin plug - reversing light - large rear lights plug - reversing lights - large safety lighting - integrated rear fog light - automatic center support wheel - body only splash-proof - registration papers: COC papers Accessories can be retrofitted - please enquire: - motorcycle rockers, - motorcycle stand rails, - motorcycle lashing straps, - lashing straps - additional lashing eyes - slotted-hole rails for lashing straps & locking beams - bar strip with rubber coating for lashing straps & locking beams - steel or aluminum locking beams - interior lights - reversing lights - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale reserved - Kledpfx Asu Htnteb Sel

Condition: new, empty load weight: 860 kg, maximum load weight: 1,740 kg, overall weight: 2,600 kg, axle configuration: 2 axles, loading space length: 3,600 mm, loading space width: 1,700 mm, loading space height: 1,900 mm, loading space volume: 11.6 m³, color: silver, construction height: 2,530 mm, working width: 2,290 mm, Hydraulics, automatic reverse drive, hot-dip galvanizing, * IMMEDIATELY AVAILABLE * TECHNICAL DATA: - Make: Unsinn - Model: UKT 6C 3617-26-14 - Vehicle type: Refrigerated trailer - Vehicle condition: New vehicle - Initial registration: without initial registration - TÜV/HU: 2 years from initial registration - Internal dimensions (LxWxH): 360 x 170 x 190 cm - External dimensions (LxWxH): 542 x 229 x 253 cm - Floor loading height: 53 cm - Perm. Total weight: 2,600 kg - Unladen weight: 860 kg - Payload: 1,740 kg - Chassis: Low loader (wheels next to the body) - Tires: 185/65R14 - Chassis: ALKO rubber suspension - Support wheel: Yes, automatic - 100km/h approval: Optional EQUIPMENT: - Brake: Yes - Number of axles: 2 - Floor: Wooden floor - Walls material: Sandwich (sheet steel/foam 40mm/sheet steel) - Roof material: Sandwich (sheet steel/foam 40mm/sheet steel) - Color: Grey - Number of pallet spaces: 6 - Tipping / lowering function: Without - Overrun device/brake: ALKO - Frame/chassis: Aluminium substructure - Galvanization: Hot-dip galvanized - Drawbar: V-drawbar, bolted, U-profile - Mudguards: Plastic mudguards - Side door: No - Cooling unit: GOVI Arktik 1600 N - Temp. Control range: +2 C to +10 C - Cooling capacity: 1800 W - Rear doors / tailgate: Rear doors - Locks for box body: Press lever lock - Drive-on angle: - - Supports: Yes - Lashing rails: Optional, can be retrofitted - Lashing eyes: Optional, can be retrofitted - Interior light: Yes - Rear lighting: Incandescent bulbs, lamps recessed in rear frame - Plug for lighting: 13-pin - Vehicle documents: ZBII & COC papers DESCRIPTION: - Unique, torsion-resistant aluminium chassis for safe driving characteristics - Loading area made of multi-glued screen printing plate, 18 mm - 4 stable telescopic crank supports for up to 6000 kg standing weight - Thermo-sandwich body - Inner and outer skin made of hot-dip galvanized and powder-coated sheet steel, 40 mm PU core insulation - Exterior color silver RAL 9006 - Double-wing rear door with aluminium hinges - Refrigeration compartment press lever lock and stainless steel door stop - Rear frame and edging profiles made of special anodized aluminium profiles for attractive aesthetics 200 mm impact protection at the bottom, all-round on 3 sides - Arktik 1600 N refrigeration unit - cooling capacity 1800 watts at a cold room temperature of +6 C and an ambient temperature of 30 C - temperature control range from +2 C to +10 C - evaporator air flow rate: 750 m - Fully encapsulated unit with outdoor housing mounted at the top of the front - Environmentally friendly CFC-free refrigerant - Electronic automatic defrosting of the evaporator - The operating display can be locked and is therefore protected against unauthorized operation - Electronic digital thermostat for optimum control of the temperature range - 230 volt interior lighting - Very stable V-drawbar REINFORCED - ALKO overrun device and parking brake - Automatic reverse drive - Plastic mudguards - 13-pin plug - Reversing light - Large reversing light - Large reversing light - Automatic reverse drive - Plastic mudguards - 13-pin plug - Large reversing light - Large reversing light - Large reversing light - Large reversing light Reversing lights - Large safety lighting - Integrated rear fog light - Lighting recessed in rear frame - Reinforced automatic support wheel Optional retrofitting accessories: - 100km/H approval - Slot-and-hole rails - Rubber-coated bar rail - Steel or aluminum locking bar Ksdpfju Hrvpox Ab Sjll

Condition: new, empty load weight: 913 kg, maximum load weight: 1,787 kg, overall weight: 2,700 kg, axle configuration: 2 axles, loading space length: 4,050 mm, loading space width: 2,040 mm, loading space height: 2,050 mm, loading space volume: 17.2 m³, color: black, construction height: 2,690 mm, working width: 2,550 mm, Hydraulics, automatic reverse drive, hot-dip galvanizing, unbraked, tandem with sheet steel sandwich body 30mm walls, braked, 2 lashing rails, 8 lashing eyes, * IMMEDIATELY AVAILABLE * Tandem with sheet steel sandwich body 30mm walls, braked, 2 lashing rails, 8 lashing eyes, rear ramp combination Technical data: - Type: New vehicle - TÜV: New/2 years - Availability: IMMEDIATELY! - Gross vehicle weight: 2700kg - Unladen weight: 913 kg - Payload: 1,787 kg - Interior dimensions: 405 x 204 x 205 cm (L x W x H) - Overall exterior dimensions: 563 x 255 x 269 cm (L x W x H) - Loading sill height: 59 cm - Tyres: 185R14C steel rim - Brake: yes - Support wheel: yes - 100km/h: at extra charge - incl. vehicle documents Standard equipment: Brake: yes Number of axles: 2 Floor: Wooden floor Walls material: Sandwich (sheet steel/foam 30mm/sheet steel) Roof material: GRP sandwich Through-loading height: 199 cm Through-loading width: 199 cm Through-loading length: 405 cm Color: black Number of pallet spaces: 8 Tipping / lowering function: Without overrun device/brake: ALKO Frame/chassis: aluminium substructure Galvanization: hot-dip galvanized Drawbar:V-drawbar, bolted, C-profile Mudguards:Plastic mudguards Side door:No Side flap: No Rear doors / tailgate:Rear doors, tailgate Rear door / tailgate Material: aluminium Tailgate Load: approx. 800 kg Clearance dimensions rear: 199 x 199 cm Locks box body: Espagnolette lock Drive-on angle:- Supports: Optional, can be retrofitted Lashing rails: Yes Lashing eyes: 8 Interior light: Optional, can be retrofitted Rear lighting: Incandescent bulbs, lamps recessed in rear frame Side lighting:- Plug for lighting:13-pin Vehicle documents: COC papers Accessories can be retrofitted - please enquire: - anti-theft device - rear supports - 100km/H approval with wheel bumper - side door - motorcycle rockers, - motorcycle stand rails, - motorcycle lashing straps, - lashing straps - additional lashing eyes - additional slot-and-hole rails for tensioning straps & locking bars - bar strip with rubber coating for tensioning straps & locking bars - steel or aluminum locking bars - interior lights - reversing lights - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Ksdpfsu Skwvjx Ab Soll

Condition: used, Year of construction: 1995, FUJI KING ROTARY DEBARKERS CAPACITY 200t/h USED EQUIPMENT, DISASSEMBLED, WASHED, LOADED ON TRUCKS AND CONSOLIDATED IN CONTAINER. MODEL KD6/50DT (EACH DEBARKER) YEAR OF MANUFACTURE 1995 TECHNICAL SPECIFICATIONS OF EACH EQUIPMENT: • TWO (2) DOUBLE ROTOR SECTIONS EACH. Kedpfx Aberkr Tvs Soll • SECTION LENGTH OF 7.65 mt (25') • TOTAL LENGTH OF 15.3 mt (50´) • WIDTH OF THE INTERIOR COMPARTMENT OF PIECES OF 2.4 mt. • MAIN ROTORS DIAMETER 0.9 mt. (36”) x LENGTH 7 m (23’) • POWER SYSTEM: 2 ENGINES 575 V 60 Hz 100 HP CONNECTED TO THE REDUCER MOTOR AND DRIVING THROUGH CHAIN. • VARIABLE SPEED FROM 16 TO 50 RPM. • DISCHARGE DRIVEN BY VERTICAL CHAIN AND MOTOR 575 V 60Hz 3HP • NET WEIGHT: 42 TONS PER SECTION - 2 SECTIONS 84 tons TOTAL. EACH KIT DOES INCLUDES: ❖ WAIST BARK BELT CONVEYOR ❖ FEED ROLLERS ❖ SUBSTRUCTURE FOR SUPPORTING FOUNDATIONS, CONSISTING OF A HORIZONTAL SUBFRAME WITH ITS RESPECTIVE VERTICAL H-TYPE SUPPORTS AND BRACINGS, ALL IN HIGH-STRENGTH STRUCTURAL STEEL.

Condition: excellent (used), Bosche volume scale 3D Silence 600 Volume and weight recording for master data recording and master data maintenance in the warehouse Precise volume and weight measurement for warehouse management and order picking. Non-contact measurement with laser sensors Weighing range up to 150 kg Easy integration into IT systems Ideal for precise freight calculation and master data recording ✔ Professional weighing technology ✔ Original BOSCHE quality Fast - Accurate - Reliable Features of the volumetric scale Static volume measurement of parcels Fast, non-contact dimensional measurement of packages Measuring frame made of powder-coated steel Low construction height for easy placement of parcels Weighing range 30 kg, 60 kg or 150 kg (weighing accuracy up to 10 g) Reliable weighing thanks to three calibratable, laser-welded load cells Three high-quality laser distance sensors with laser class 2 Measuring accuracy up to 1.5 mm Maintenance-free and wear-free design of the weighing technology Simple handling with high ease of use Easy integration into merchandise management and shipping systems Direct connection to existing PC systems via USB interface (or optionally via W-LAN) Data transfer to higher-level IT systems or WMS (warehouse management systems) in modern languages (SQL, CSV, REST) Simple process integration thanks to WINDOWS 10 operating system (WINDOWS network client) Intuitive software provides all data at a glance Weighing platform (powder-coated steel) 3 high-precision load cells (BOSCHE) Digital cable box with interface output Power supply via mains adapter Measuring stops for measuring non-cubic objects Area of application Parcel measurement => length x width x height => girth => volume measurement (accuracy to 1.5 mm) Master data acquisition - freight checkpoints Air freight control - Freight acceptance Packaging planning - calculation of packaging sizes for optimal shipping Capacity planning - planning of storage locations Profitability check of storage space and packaging processes Optimized forklift trips Best possible storage space utilization for trucks Master data acquisition in seconds: height, length, width, weight Weighing technology - measurement technology The scale platform is connected to a Windows PC via an interface. The software included in the scope of delivery visualizes weight and dimension data directly on your Windows computer. The calculated volume and volume weight are also displayed. Construction The extremely flat weighing bridge substructure made of powder-coated steel is extremely robust. It is equipped with three laser-welded load cells. Volume measurement is provided by three high-quality laser distance sensors of laser class 2, which measure the length, width and height of the package to an accuracy of 1.5 mm. For optimum integration into your processes, the BOSCHE 3D scale is available in three different sizes. Weighing range: 30 kg, 60 kg or 150 kg. Supplied without software Kjdpfx Aovtmp Tob Sjll HxWxD = 1000 x 780 x 780 mm Product video Volume scale 3D Silence: List price € 8,663.00 gross Software VolumeScannerProfessional: 1.236,00 € gross You can find more items - new and used - in our store! International shipping costs on request!

Condition: good (used), functionality: fully functional, roll diameter: 50 mm, total width: 605 mm, total height: 100 mm, total length: 1,470 mm, conveying length: 1,430 mm, construction width: 605 mm, construction height: 100 mm, TAF item number: 1000005533 Manufacturer: SSI Year of manufacture: unknown Overall dimensions (LxWxH) in mm: 1,470 x 605 x 100 Width incl. side panel in mm: 605 Kjdpfx Aboxf Ivze Sell Side panel height in mm: 95 Conveyor length in mm: 1,430 Conveyor width in mm: 500 Substructure: none Support roller axle type: plugged, rigid axle Support roller diameter in mm: 50 Support rollers per axle: 1 Support roller material: steel Roller pitch in millimetres: 60 Drive: gravity Net weight in kg: 35 Condition: used / fully functional Function test: OK

Condition: good (used), Year of construction: 2013, functionality: fully functional, conveyor belt length: 9,050 mm, conveyor belt width: 600 mm, conveyor belt speed: 170 mm/s, total length: 8,450 mm, total width: 1,000 mm, total height: 1,600 mm, power: 0.37 kW (0.50 HP), TAF item number: 100000554 Manufacturer: FRASCH Year of manufacture: 2013 Overall dimensions (LxWxH) in mm: 8,450 x 1,000 x 1,600 Width incl. side panel in mm: 800 Width incl. drive in mm: 1,000 Side height in mm: 100 Conveyor length, total in mm: 9,050 Conveyor length, horizontal in mm: 6,950 Conveyor length, vertical in mm: 2,100 Conveyor width in mm: 600 Belt type: cleated belt Belt width in mm: 700 Cleats (cleat height/cleat spacing) in mm: 50 / 520 Substructure: fixed supports, height-adjustable Sliding surface: steel Inlet height in mm: max: - min: - Outlet height in mm: max: 1,700 min: 1,500 Drive: Head drive Motor type: Gear motor Motor data: SEW 0.37 kW Klsdjxf Iukopfx Ab Sol Conveyor speed in m/s: 0.17 m/s Net weight in kg: Special features: Some cleats are bent or slightly damaged Condition: Used, fully functional Function test: OK

Condition: like new (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: SN 1171, workpiece weight (max.): 450 kg, working height: 870 mm, feed rate Y-axis: 45 m/min, working width: 300 mm, warranty duration: 12 months, total length: 1,900 mm, height adjustment type: mechanical, overall weight: 450 kg, total height: 1,500 mm, total width: 1,300 mm, compressed air connection: 6 bar, Equipment: documentation/manual, The APACHE 3 is a cost-effective solution suitable for both craft and industrial applications, specifically designed for coating facade claddings and their supporting substructures. Kjdpfx Asxhquxob Sell It is perfectly suited—without limitation—for coating profiles with cross-sections of 300 mm x 25 mm, providing flawless surfaces in a highly efficient and cost-saving manner, requiring no special prior knowledge from the operator. This unit can also be integrated into automated systems or coating lines. It can coat boards, profiled boards, tongue-and-groove boards, rhomboid profiles, laminated timber, and structural timber, as well as decking, garden, log cabin, sauna or privacy screens. Essentially, it's ideal for any product requiring a premium-quality visible surface. Substructures (typically black) can also be coated with low-viscosity, highly pigmented stains containing wood preservatives—even without lateral brushes. The APACHE 3 distinguishes itself from standard market products by its robust monoblock steel welded frame and a coating applied using a baking process with extremely resistant Teflon (enamel). This non-stick coating ensures self-cleaning, making the machine extremely low-maintenance. The machine offered is brand new and available for demonstration in our showroom. We would be pleased to demonstrate our machines and systems either on-site or at customer locations in your vicinity. For further information and a detailed description, please visit our SARMAX website. APACHE 3 Serial number: SN 1171 Flood coating unit with three (3) brushes Working width: 300 mm Working height: 100 mm Minimum workpiece length: 100 cm Feed speed, frequency-controlled: 10–45 m/min Number of driven transport rollers: 3 Diameter of transport rollers: 80 mm Brush arrangement: two (2) from above, one (1) from below Diameter of brushes: 160 mm Central brush drive: 2.2 kW Compressed air blow-off left/right, fan nozzles to clear tongue-and-groove: 80 l/min Double diaphragm pump: 90 l/min Compressed air consumption: 600 l/min Connection: CEE plug 16 A 400/50/3 V/Hz/P E Total power: 4.5 kW Working height: 900 +/- 50 mm Approximate weight: 450 kg Operation: via control and indicator devices according to VDE, hydraulic ball valves Dimensions (L/W/H): 1,900 x 1,300 x 1,500 mm Standard: CE Color, design: grey 7046 RAL

Condition: used, 2-cylinder upright stainless steel tanks, used Capacity: 117 cbm Order number: 4325 Material: V2A Internal welded seams Food-grade polished Dimensions: 3,600 mm inner diameter 3,700 mm outer diameter 13,000 mm cylindrical height 500 mm top head 300 mm ground clearance 13,800 mm approx. total height Design: Cylindrical, upright with an inwardly dished bottom cone, with concrete substructure with upper conical head Propeller agitator installed at an angle in the lower cylinder section Insulation around the cylinder, fully welded cover Connections: 1 manhole in the cylinder Kjdpjw Skx Tsfx Ab Soll Ventilation with hood in the top head various connections for filling, discharge, CIP

Condition: used, Year of construction: 1976, machine/vehicle number: 761907, General / technical data: Heavy duty mechanical swing bending machine of solid welded construction in a very good condition. working width:2000mm material thickness for steel ST 50 max.: 20mm opening of the upper beam (clamping beam):max. 475mm Adjustability of the bending beam: 200mm motorized height adjustment Bending angle: 130° adjustable by electric angle input upper beam speed:6mm/ sec Bending beam speed:1,25 rpm ( approx. 90sec for 90° bending) Backgauge:motorized adjustable from 50-999mm, with digital length display Machine dimensions: (h x w x d) 3600x 4350 x 4400mm (without pit / with bending beam platform). dimensions switch cabinet:(h x w x d) 1800 x 1200 x 400mm drive power bending drive: 30KW drive power upper beam (clamping beam): 22KW Power supply:500Volt 50 HZ / control voltage 220Volt Weight: 24.500 kg Accessories / special equipment: - 5 sets of bending toolseach consisting of clamping and bending rail R 8, R 12, R 15,R 20, R40. - Folding back gauge - Central lubrication Klodscvtbyspfx Ab Ssl - machine documentation Remark: - Machine comes from a repair shop - For the machine a pit 900mm deep (foundation) is needed. The substructure of the slewing drive shown on the pictures is only for test run and demonstration purposes.

Year of construction: 2023, condition: like new (used), machine/vehicle number: 206RSD, Rockwell scales: HRC - HRA - HRD - HRB - HRF - HRG - HRL - HRM - HRR Standard delivery: - Hardness Tester - Protecction Guide for Indenter - Clamping Protrection - Diamond indenter 120° Rockwell - Ball holder with Ø1/16" ball - Flat Anvil Ø60mm - V-Anvil Ø60mm - Accessory box Kodoc In U Iepfx Ab Ssll - Dust cover - User manual