Used Anvil Substructure for sale (272)

Condition: new, first registration: 07/2012, fuel type: diesel, color: red, driver cabin: other, gearing type: other, loading space length: 6,500 mm, loading space width: 2,480 mm, loading space height: 2,560 mm, Year of construction: 2012, Vehicle location: Bovenden, aluminum body, tarpaulin and spreader bars, lashing eyes. Body: flatbed / tarpaulin, LIKE NEW! Like-new flatbed body from a trade show vehicle, suitable for a frame track of 834 mm, high-strength subframe with a height of 300 mm, crossmember spacing of 375 mm, enclosed with a flatbed outer frame all around, foldable lashing rings with a load capacity of 2500 daN, certified according to DIN 12640, embedded and welded into the outer frame at a spacing of 400 mm. Side board height 600 mm, front wall height 2000 mm, 30 mm thick screen-printed plywood floor, tarpaulin frame in 3 parts, clear side height approx. 2600 mm, 2 lifting points for forklifts in the substructure. Dismounted from a D-Benz Antos 2543L 6x2 with a wheelbase of 4000 mm. Gbedpji Rnq Aofx Am Asr New price approx. 16,000 EUR! Also available: 30 more interchangeable bodies for 1,000 to 5,900 EUR! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale and errors!

Condition: used, empty load weight: 10,960 kg, maximum load weight: 6,040 kg, overall weight: 17,000 kg, axle configuration: 2 axles, first registration: 08/1996, total length: 2,550 mm, total width: 4,000 mm, suspension: steel, tire size: 205 / 75 R 17,5, color: blue, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, aluminum superstructure, 2 axles, SAF axles, leaf spring suspension, ABS (anti-lock braking system), flap, doors, portal doors, interior lighting, front supports, rear supports, side aluminum fender, twin tires, storage box. Superstructure: for exhibition hall IN 100. Only sold as a package with exhibition hall IN 100 and semi-trailer IN 62732!!! Price per semi-trailer: 49,000 euros net!!! Superstructure parts and accessories, aluminum pavilion substructure in semi-circular design, fold-down terrace, front side with plastic double-sheet cladding, fabric roof covering, rear anchoring to the roof edges of the two semi-trailers, partial seating, stage, cinema, partial rubber flooring, air conditioning, heating, dimensions of the hall: length approx. 30m, width approx. 20m, height approx. 6m. For a more detailed description, please request it! New price approx. 500,000! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale and errors! Gbedji Rni Uepfx Am Aer

Condition: used, empty load weight: 5,350 kg, maximum load weight: 12,650 kg, overall weight: 18,000 kg, first registration: 12/2006, loading space length: 7,050 mm, loading space width: 2,400 mm, loading space height: 1,240 mm, total length: 2,550 mm, total width: 2,780 mm, tire size: 385/65 R 22,5, color: green, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, storage compartment, 2 axles, MB axles with disc brakes, turntable, air suspension, lifting and lowering function, ABS (anti-lock braking system), lashing eyes. Godpfx Amji Rpkms Aebr Superstructure: with stakes, available 3 times! Stake length 1,100 mm, steel floor with wooden substructure, rear and front wall 800 mm high, ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale and errors excepted!

Condition: new, color: white, driver cabin: other, gearing type: other, loading space volume: 10 m³, loading space length: 5,200 mm, loading space width: 2,420 mm, loading space height: 800 mm, Year of construction: 2024, Vehicle location: Bovenden, lashing eyes, swing tailgates Body: PAVIC 3-way tipping body with aluminum side walls and pneumatic side and rear wall opening. Substructure made of solid welded steel construction, two longitudinal members with cross members to accommodate the 5 mm thick tipper profile and the 4 mm Hardox or Naxtra base plate. A 1,000 mm high fixed steel bulkhead with two round eyelets in the inner area, halfway out at the top. Fixed corner stanchions with bottom locks. The rear and side walls (one-piece over the entire length) are made of hollow aluminum profiles. The side walls are foldable and swing with a side wall lifting aid. The tailgate is also foldable and swing-mounted, with central locking in the tipper profile. 4 mm thick Hardox or Naxtra floor plate, neatly welded to the tipper profile and the longitudinal and cross members. The press beam and tipping boom are embedded in the longitudinal members and reinforced accordingly. Lashing eyes (4 per side) are located on the outside of the tipper floor, distributed along the length. The subframe is galvanized! Disassembly of a new MAN TGS 28.400 6x4-4 BL with a crane behind the cab and a 3600 mm wheelbase! ACCESSORIES INFORMATION IS PROVIDED WITHOUT GUARANTEE. Subject to change, prior sale, and errors! Gjdpfxjv Tp Hus Am Ajbr - .

Condition: used, empty load weight: 8,700 kg, maximum load weight: 8,300 kg, overall weight: 17,000 kg, axle configuration: 2 axles, first registration: 08/1996, total length: 2,550 mm, total width: 4,000 mm, suspension: steel, tire size: 205 / 75 R 17,5, color: blue, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, aluminum body, 2 axles, SAF axles, leaf spring suspension, ABS (anti-lock braking system), doors, interior lighting, roll-up door, front supports, rear supports, side aluminum protective panels, side door on the right, twin tires, storage compartment. Gbodpfoi Rnkcjx Am Aer Body: for exhibition hall IN 100. Only sold as a package with exhibition hall IN 100 and semi-trailer IN 62733!!! Price per semi-trailer: 49,000 euros net!!! Body parts and accessories, lightweight metal pavilion substructure in a semi-circular design, fold-down terrace, front side with plastic double-sheet covering, fabric roof covering, rear anchoring to the roof edges of the two semi-trailers, partial seating, stage, cinema, partially rubber flooring, air conditioning, heating, dimensions of the hall: length approx. 30m, width approx. 20m, height approx. 6m. For a more detailed description, please inquire. New price approx. 500,000! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Condition: used, mileage: 1,001 km, first registration: 01/2014, color: white, driver cabin: other, gearing type: other, loading space length: 7,300 mm, loading space width: 2,490 mm, loading space height: 2,180 mm, Year of construction: 2014, Vehicle location: Bovenden. Features: doors, swing-out side panels. Body: Orten beverage transport body, Kettliner-Light type, with load securing system. Floor made of approximately 27mm thick screen-printed laminated panels, front wall made of aluminum profiles, double-wing rear doors made of aluminum, substructure in steel lightweight construction, sliding rear load securing system allsafe-Jungfalk "CRS", attachment device for a forklift that can be carried on board, lateral loading height approximately 2180mm. Gjdpfsi Rnvcsx Am Aebr Removal of Scania R450 LB 6x2-4 with 4700mm wheelbase! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Condition: used, mileage: 1,001 km, first registration: 01/2015, color: yellow, driver cabin: other, gearing type: other, loading space volume: 36 m³, loading space length: 6,030 mm, loading space width: 2,430 mm, loading space height: 2,460 mm, Year of construction: 2015, Vehicle location: Bovenden, doors, lashing rails, light roof Body: Young box body with double wing door, galvanized substructure, galvanized subframe and cross beams, dismantling of Daimler-Benz Atego 816 4x2 with wheelbase 4220mm! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Gbjdpfx Asvhh Ruem Aor - .

Condition: used, mileage: 1,001 km, first registration: 01/2014, color: white, driver cabin: other, gearing type: other, loading space length: 7,300 mm, loading space width: 2,490 mm, loading space height: 2,180 mm, Year of construction: 2014, Vehicle location: Bovenden. Features: doors, swing-out side panels. Body: Orten beverage transport body, Kettliner-Light type, with load securing system. Floor made of approximately 27mm thick screen-printed laminated panels, front wall made of aluminum profiles, double-wing rear doors made of aluminum, substructure in steel lightweight construction, sliding rear load securing system allsafe-Jungfalk "CRS", attachment device for a forklift that can be carried on board, lateral loading height approximately 2180mm. Gedpfx Amoi Rmf Dj Aobr Removal of Scania R450 LB 6x2-4 with 4700mm wheelbase! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Condition: used, empty load weight: 10,960 kg, maximum load weight: 6,040 kg, overall weight: 17,000 kg, axle configuration: 2 axles, first registration: 08/1996, total length: 2,550 mm, total width: 4,000 mm, suspension: steel, tire size: 205 / 75 R 17,5, color: blue, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, aluminum superstructure, 2 axles, SAF axles, leaf spring suspension, ABS (anti-lock braking system), flaps, doors, portal doors, interior lighting, front supports, rear supports, side aluminum fender guards, twin tires, storage compartment. Godpfji Rn Ivjx Am Aobr Superstructure: for exhibition hall IN 100. Only sold as a package with exhibition hall IN 100 and semi-trailer IN 62732!!! Superstructure components and accessories, lightweight aluminum pavilion substructure in a semi-circular design, fold-down terrace, front side with plastic corrugated double-sheet cladding, fabric roof covering, rear anchoring to the roof edges of the two semi-trailers, partial seating, stage, cinema, partially rubber flooring, air conditioning, heating, dimensions of the hall: length approx. 30m, width approx. 20m, height approx. 6m. More detailed description available upon request! New price approx. 500,000! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale, and errors!

Year of construction: 2026, condition: new, DM Flat Conveyor Belt Type FB-700 without substructure for bulk material conveying Conveyor belt length: 6,000 mm Belt width: 650 mm Fabricated from structural steel, laser-cut, bent, and welded Base frame powder-coated in RAL 5015 Modular conveyor belt frame construction / sections available in transportable lengths. Frame structure extendable or can be shortened at any time. Carrier roller system on the return strand, shaft Ø60/15 mm Roller station spacing approx. 500 mm (custom options possible) Closer roller spacing in load area Drive drum + tail drum made of S235 steel, welded and machined Gjdjyhznhepfx Am Asbr Ø220x700 mm crowned, shaft fixed with pillow block bearings. Drive: Hydromec worm gear motor 1.1 kW, belt speed 1.15 m/sec Connection 400 V, 50 Hz, protection class IP54 Drive supplied prewired to motor terminal box (Commissioning must be performed by a qualified electrician) Motor mounted on right side in direction of transport, pull configuration. Bearing points equipped with robust UCF flange bearings incl. grease nipples. Rubber conveyor belt DM EP250/2 3+1.5 cover Chevron profile, 17 mm high x 650 mm wide Joint section without profile, endlessly hot vulcanized

Condition: new, Year of construction: 2026, Aluminum Incline Conveyor with Substructure (PU/PVC with Cleats & Corrugated Sidewalls) We offer a robust incline conveyor in aluminum construction design for the reliable transport of piece and bulk materials—ideal for industry, trade, recycling, woodworking, and much more. Thanks to cleats and corrugated sidewalls, secure material transport is ensured even on steep conveyor routes. _____ Technical Data (Sample Configuration): ✔ Infeed height: customisable ✔ Inclined section: length freely selectable ✔ Discharge height: customisable ✔ Substructure with adjustable leveling feet & machinery feet or with transport castors → for compensating uneven surfaces / stable positioning _____ Gbodeyhzpljpfx Am Aor Design / Frame: ✔ Aluminum construction profile ✔ Double profile 90x45 mm or reinforced triple profile 135×45 mm ✔ Continuous wear plate 2.0 mm galvanized or 1.4301 stainless steel (VA) _____ Rollers / Drive: ✔ Drive and deflection rollers made from S235 steel, welded & machined ✔ Diameters: Ø100, 150 or 220 mm ✔ Shafts fixed with pillow block bearings ✔ Drive: shaft-mounted geared motor 0.18 – 3.0 kW ✔ Belt speed: individually adjustable ✔ Connection: 230/400V, 50Hz, IP54 protection class (standard) ✔ Drive prewired up to the motor terminal box ➡️ Commissioning must be carried out by a qualified electrician _____ Conveyor Belt / Cleats: ✔ PVC conveyor belt DM 10/2 0+005 PVC green ✔ Belt widths: 100, 200, 300, 400, 500, 600, 700, 800, 900, or 1,000 mm ✔ Endless high-frequency welded (stepped joint) ✔ 2-ply, 3-ply with extra lateral stability ✔ Corrugated sidewalls: up to 80 mm high ✔ Cleats: customizable ✔ Pitch customizable _____ Options / Accessories Available: ✔ Infeed plates ✔ Hoppers / infeed hoppers ✔ Bunkers / loading bunkers ✔ Discharge hoppers ✔ Special lengths / special widths ✔ Cleats & corrugated sidewalls as required _____ ✔ Custom solutions made to your specifications ✔ Industrial quality ‘Made in Germany’ Dimensions, versions, and pricing on request Simply reach out—we provide fast and straightforward advice. Discover tailored solutions for your industry! As an innovative mechanical engineering company, we are proud to offer bespoke solutions for the recycling, food, and processing industries. Our comprehensive product portfolio covers everything from conveyor systems and flat belt conveyors to incline conveyors, angle conveyors, and Z-conveyors. In addition, we manufacture loading bunkers, magnetic separators, overband magnetic separators, drum magnetic separators, and dosing bunkers—all tailored to meet our customers’ specific requirements. We understand that every industry and every project is unique, which is why we tailor our solutions precisely to your needs and specifications. Complex projects are an exciting challenge for us, and we look forward to developing innovative solutions together with you. With us, there are no off-the-shelf solutions—every problem gets the right answer! Challenge us! Contact us and discover how we can turn your requirements into custom solutions. Together, we will shape the future of your production processes!

Condition: new, Year of construction: 2026, Aluminum incline conveyor with substructure Gjdjyhzhbopfx Am Asbr including leveling feet and machine feet for compensating uneven floors - Feed height: 500 mm - Inclined section: 2,000 mm - Discharge height: 1,200 mm Design: Aluminum structural construction - Triple-reinforced profile 135x45 mm - Continuous removal plate 2.0 mm galvanized Drive roller + return roller made from S235 steel, welded and machined Ø150x620 mm crowned, shaft fixed with pillow block bearings. Drive: Mounted gear motor 1.10 kW, belt speed 0.77 m/sec Connection 230/400V, 50Hz, protection class IP54 Drive pre-wired up to the motor terminal box (Commissioning must be carried out by qualified electrical personnel) PVC conveyor belt DM 10/2 0+005 PVC green Belt width: 600 mm endless high-frequency welded with stepped joint Belt material: 2-ply, especially cross-stable 2 pcs wave edge profiles, 80 mm high, 50 mm wide, high-frequency welded flush with the belt edge 14 pcs T60 cleats, 400 mm long, pitch approx. 296 mm, center-mounted Belt material: 2-ply, especially cross-stable Due to the wave profiles on both sides, the usable belt width is reduced: Usable width 500 mm, calculated as follows: (Top view) Crosswise arrangement 50+500+50 mm

Condition: new, Year of construction: 2026, Aluminum angled conveyor with substructure Including adjustable feet as well as machine feet for leveling uneven surfaces Horizontal section: 3,500 mm Inclined section: 2,100 mm Inclination angle at bend: 45° Total conveyor length measured on the floor: 5,000 mm Discharge height: 2,000 mm Height of horizontal section: 500 mm Design: Aluminum structural construction - Triple-reinforced profile 135x45 mm - Full-surface discharge sheet 2.0 mm, galvanized Drive drum + tail drum made from S235 steel, welded and machined Ø150x820 mm, crowned, shaft mounted in plummer blocks. Drive: Shaft-mounted gear motor 1.1 kW, belt speed 0.77 m/sec Connection 230/400V, 50Hz, protection class IP54 Drive prewired to motor terminal box (Commissioning must be performed by qualified electricians) Gbodpfx Amsyhzhuj Aer PVC conveyor belt DM 15/4 0+007 PVC including PVC wave edge, green Belt width: 800 mm 2 pcs. wave edges, 80 mm high, 50 mm wide, high-frequency welded 32 pcs. T-50 cleats, approx. 355 mm spacing Belt material: 2-ply, especially cross-stable At the bend, the belt is guided on both sides by 3 hold-down rollers each. The belt features a 70 mm edge-free zone on each side. Due to the wave edge on both sides, the usable belt width is reduced: Usable width: 490 mm, calculated as follows: (top view) transverse arrangement 100+50+5+490+5+50+100 mm Discover custom solutions for your industry! As an innovative mechanical engineering company, we are proud to offer tailored solutions for the recycling, food, and processing industries. Our extensive product portfolio ranges from conveyor systems and flat conveyors to incline conveyors, angled conveyors, and Z-conveyors. In addition, we manufacture feed hoppers, magnetic separators, overband magnetic separators, drum magnetic separators, and dosing bunkers – all according to our customers’ specific requirements. We understand that every industry and project is unique. That’s why we customize our solutions to your individual needs and specifications. Complex projects are an exciting challenge for us, and we look forward to working with you to develop innovative solutions. With us, there is no such thing as a special solution – we find the right solution for every problem! Challenge us! Contact us and discover how we can transform your requirements into customized solutions. Together, we will shape the future of your production processes! Conveyor, conveyor system, discharge belts, belt conveyor, magnetic separator, overband magnetic separator, recycling, wood chips, plastics, metal-free metal detection, neodymium, overband magnet, magnetic belt separator, lifting magnets, filter rods, magnetic grids, magnetic grate, metal separator, block magnet, filter systems, dosing bunker, feed bunker, filling systems

Condition: new, Year of construction: 2026, Aluminum Angled Conveyor Belt with Substructure including adjustable feet and machine feet for leveling uneven surfaces Horizontal section: 2,500 mm Inclined section: 6,000 mm Incline angle at the bend: 45° Height of the horizontal section: 350 mm Total conveyor length measured on the floor: 6,750 mm Discharge height at the end of the conveyor: 4,500 mm Design: Gbsdpfx Amjyhzhzs Aer Aluminum construction - Double profile reinforced 90x45 mm - Full-surface discharge sheet 2.0 mm galvanized Drive drum and return drum S235 steel, welded and machined Ø100x620 mm crowned and turned, shaft fixed with pillow block bearings. Drive: Shaft-mounted gear motor 1.10 kW, belt speed: 0.53 m/sec Electrical connection 230/400 V, 50 Hz, IP54 protection class Drive supplied ready for connection up to the motor terminal box (Commissioning must be carried out by a qualified electrician) PU conveyor belt DM 10/2 0+005 PU including wave edge PU petrol matte Belt width: 600 mm 2 pcs wave edges 50 mm high, 25 mm wide, high-frequency welded 42 pcs T-40 cleats, 400 mm long, approx. 401 mm spacing Belt material: 2-ply, highly cross-stable In the bend area, the belt is guided on both sides by 3 hold-down rollers each. The belt features a 70 mm edge-free zone on both sides. Due to the wave edges, the usable belt width is reduced: Usable width: 300 mm, as follows: (top view) cross section 70+25+5+400+5+25+70 mm Special features: Belt guidance via PVC wedge strip on the running surface profile - 10x6 mm - Including widened substructure for improved stability against top-heaviness - Including cut-out in the discharge sheet - Including sliding guides in drive and return drums - Including magnet-free zone in the area of the overbelt magnet separator - Including bracket for DMPM1200 in the inclined section Discover customized solutions for your industry! As an innovative mechanical engineering company, we are proud to offer tailor-made solutions for the recycling, food, and further processing industries. Our comprehensive product portfolio includes everything from conveyor belt systems, flat conveyors, inclined conveyors, and angled conveyors to Z-conveyors. In addition, we manufacture feed hoppers, magnetic separators, overband magnet separators, drum magnets, and dosing bunkers – all custom-built to our customers' specific requirements. We understand that each industry and project is unique. That is why we individually adapt our solutions to your specifications and requirements. Complex projects are an exciting challenge for us, and we look forward to developing innovative solutions together with you. For us, there are no special designs – we find the right solution for every challenge! Put us to the test! Contact us and discover how we can transform your requirements into bespoke solutions. Let’s shape the future of your production processes together! Conveyor belt, conveyor system, discharge belts, belt conveyors, magnetic separator, overband magnet separator, recycling, wood chips, plastics, metal-free, metal detection, neodymium, overband magnet, magnetic belt separator, lifting magnets, filter rods, magnetic grids, magnetic grates, metal separator, block magnet, filter systems, dosing hoppers, feed hoppers, filling systems

Condition: new, Year of construction: 2025, machine/vehicle number: 2022042210, Aluminum angled conveyor belt with substructure Conveyor belt length: 1,500mm flat + 3,000mm rising Pitch angle in bend 45°C Height of the horizontal top edge approx. 200mm PVC conveyor belt Conveyor belt EM 15/2 0+17 PVC green Belt width 500mm 31 pcs. T40 studs welded - pitch 300mm * antistatic due to threads in the fabric on the underside endlessly welded with stepped finger connection 40mm sidewall high-frequency welded on both sides * edge-free zone on both sides for tape guidance in the incline Lateral arrangement: -70+35-5+280-5+35+70 Full-surface underlay sheet Godpfx Amjh Ellzj Asbr Drive: Motor approx. 1.1KW Belt speed approx. 0.3m/sec * optionally controllable with frequency converter Connection 220/400V, 50Hz protection class IP54

Condition: as good as new (ex-display), Year of construction: 2025, Complete solution for transporting bulk goods such as shredded goods, wood chips, wood pellets, granulate, etc. Aluminum angled conveyor incl. substructure horizontal range 2,500mm (adjustable) Rising range 5,000mm (customizable) Angle in the bend 35,40 or 45° Feed height: horizontal (individual) Discharge height individually adjustable Construction: height adjustable ( to move) Conveyor belt width 500mm (customizable) We supply our conveyor belts in PVC, PU, felt or rubber. PU conveyor belt including cleats and corrugated edge Drive: Motor 1.1KW (adjustable), speed approx. 0.3m/sec Connection 220/240V, 50Hz protection class IP54 Gbsdpfx Amji Igdfo Aor Drive etc. ready for connection, motor control optional 8x adjustable machine feet for alignment Wavy edge: 50x25mm T-50 lugs - 400mm pitch 2-layer particularly laterally stable Fixed overbelt magnetic separator: Permanent overbelt magnetic separator TYPE PM1200 Manufacturer: magnetprofis GmbH & Co. KG L x W x H: 1200 x 550 x 200mm Magnetic L: 700mm W: 250mm Gear motor: 0.37KW We always have various systems of this type in stock. The delivery time for an individual system is currently around 2-3 weeks, depending on the manufacturing effort. Our core competence lies in supplying the customer with exactly what he really needs. Together with our customers, we work out customer-specific, individual solutions and supply corresponding systems from our own production. Feel free to contact us by phone to find a suitable solution for your application. Conveyor belt, conveyor belt system, discharge belts, belt conveyor, magnetic separator, overbelt magnetic separator, recycling, wood chips, plastic, metal-free metal detection, neodymium, overbelt magnet, magnetic belt separator

Condition: new, power: 212 kW (288.24 HP), fuel type: diesel, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 2,640 mm, loading space length: 7,280 mm, loading space width: 2,480 mm, loading space height: 2,600 mm, Year of construction: 2025, Equipment: ABS, air conditioning, Equipment: - Extended day cab - Translucent sun visor - Halogen headlights with dual reflectors and impact-resistant Lexan lens covers - Bumper-mounted fog lights - Green-tinted windows - Mirror arms suitable for body widths 2.50–2.60 m - Central locking system - Adjustable roof spoiler - Long side fenders - Cab color: H3275WHTE - Headlight surround and bumper color: Stone Grey - Roof spoiler in cab color - Side fender color: cab color - Chassis color: grey - Air-suspended luxury driver's seat - Armrest on driver's seat - Fixed co-driver's seat - Engine tunnel storage compartment - Manually operated air conditioning with recirculation function - Manually operated roof hatch - ECAS remote control - 10-year subscription to PACCAR Connect - Digital (intelligent) tachograph VDO DTCO - DAF infotainment system - Combined antenna for AM/FM, GSM, and GPS - DAF Drowsiness Detection - Lane departure warning system - Electronic Vehicle Stability Control (VSC) - Acoustic reversing warning system - Hill start assist - Safety system alerting the driver to moving objects on the passenger side - Front axle type F60, parabolic suspension - Front axle: tire size 285/70R19.5, wheel size 19.5 x 7.50 - Driven rear axle(s): tire size 285/70R19.5, wheel size 19.5 x 7.50 - Supplier: Goodyear - Tire pressure monitoring - Steel disc wheels, silver-grey - Wheel trims without center part, silver-grey (RAL 9006) - Front axle: tire size 285/70R19.5, Goodyear type KMAXS2 - Driven rear axle: tire size 285/70R19.5, Goodyear type KMAXD2 - Engine PX-7, 6-cylinder diesel engine - Emissions standard Euro 6 - Idle shutdown system after 5 minutes idling - PowerLine automatic transmission, 8 speeds - PowerLine 8AP1200 automated transmission, ratio 4.89–0.64, 8 speeds - Automated gearbox control software - Rear axle ratio 4.63 - Driven rear axle with mechanical differential lock - ASR (traction control) system - Exhaust brake - Parking brake control with test position - Wheelbase 5.60 m / rear overhang 2.40 m - Longitudinal frame height 270 mm, thickness 6.0 mm. No inner reinforcement. - Plastic fuel tank, 200 liters - AdBlue® tank 30 liters - Wheel chock - Towing cross-member, D-value 85 kN, Dc-value 70 kN, V-value 25 kN. Trailer coupling D-value 85 kN. - Pneumatic connection for trailer with rotary couplings - Electrical connection for trailer (24 V) with two 7-pin sockets. An additional 7-pin socket for connecting the EBS system of the trailer/semitrailer - LED side marker lights - Body mounting BAM 1 - Alternator 100 A, batteries 2 x 175 Ah - Water separator with 30-micron filter and heating - Air intake at the top, behind the cab Gbsdoyqdkajpfx Am Ajr - Warranty Plus - Driveline warranty Platform body, internal length 7280 mm with Palfinger tail lift C 1500 ML pro BODY: - Platform body - Rear portal with top-hinged tailgate Body dimensions: - External length: approx. 7295 mm - Internal length: approx. 7280 mm - External width: approx. 2550 mm - Internal width: approx. 2480 mm - Internal height: approx. 2640 mm - Side loading height: approx. 2600 mm - Rear frame opening: approx. 2450 mm wide x approx. 2560 mm high - Substructure with longitudinal and cross members of galvanized steel - Floor thickness nominal 24 mm - Anti-slip phenolic coated floor - Drop sides of aluminum, height 500 mm - Galvanized outer frame with 13 lashing rings per side - Front wall of plywood, height 1,800 mm - 1 fixed aluminum board above the front wall - Front wall impact protection from 12 mm phenolic plywood, 1,180

Year of construction: 2021, condition: new, Complete solution for the transport of bulk materials and demetalization of magnetic metal contaminants. Aluminum angled conveyor belt including substructure horizontal area 2000mm (adjustable) Rising range 4500mm (customizable) Freely selectable angle in the bend: 30, 35, 40 or 45 ° Construction: height adjustable Construction for suspending the overband magnetic separator DMPM1200 included Conveyor belt width 400mm (adjustable) Gbedpfxehh Ay So Am Aer We deliver our conveyor belts in PVC, PU or rubber. PVC conveyor belt including carrier and corrugated edge Drive: Motor 0.25KW (adjustable), speed 0.3m / sec Connection 220 / 240V, 50Hz, protection class IP54 Drive etc. ready for connection, motor control optional 6x adjustable machine feet for alignment Wave edge: 40x35mm T-20 studs - 400mm pitch 2-ply particularly cross-stable Our core competence lies in delivering exactly what the customer really needs. We work together with our customers to develop customer-specific, individual solutions and deliver corresponding systems from our own production. Feel free to contact us by phone to find a suitable solution for your application. Conveyor belt, conveyor belt system, discharge belts, belt conveyor, magnetic separator, overbelt magnetic separator, recycling, wood chips, plastic, metal-free metal detection, neodymium, overbelt magnet, magnetic belt separator

Year of construction: 2020, condition: new, Aluminum flat conveyor belt with substructure Working height 900mm, height adjustable using machine feet 1500mm flat Dimensions: approx. 1500 x 500 x 105mm Aluminum construction: Conveyor belt width with welded corrugated edge PVC conveyor belt with T cleats. Green conveyor belt, 2-ply, particularly cross-stable, endlessly welded with step connection Gjdpfx Amegggkps Aobr * antistatic due to threads in the fabric of the running side Drive: motor approx. 0.18 kW, speed 0.4 m / sec. * controllable with frequency converter Connection 220 / 400V, 50Hz protection class IP54 Drive, motor control optional

Year of construction: 2018, condition: excellent (used), Aluminum riser conveyor incl. Substructure Dim: 4000 x 460 x 1000 / 1700mm Construction: height adjustable Conveyor belt width 400mm PVC conveyor belt incl. Driver and wave edge (NEW) Construction for suspension of the overband magnetic separator. Gbsdpfx Aed Dza Asm Asr Permanent overbelt magnetic separator TYPE PM1200 Manufacturer: the magnet professionals L x W x H: 1200 x 550 x 200mm Magnetic L: 700mm W: 250mm Gear motor: 0.22KW Inner bearing lubrication for 10,000 operating hours. Protection class: IP-55 * incl. new bearings, new conveyor belt

Condition: new, Year of construction: 2025, functionality: fully functional, Aluminum inclined conveyor belt with substructure including adjustable feet and machine feet to level uneven ground. - Feed height: 250 mm - Ascending section: 2,500 mm - Discharge height: 1,800 mm Gbsdpfx Amov Suvfs Ajr Design: Aluminum construction - Double reinforced profile 90 x 45 mm - Full-surface removal plate Drive roller + idler roller made of S235 steel, welded and machined Ø100 x 520 mm, crowned, shaft secured with clamping bearings. Drive: 0.55 kW slip-on gear motor, speed 0.3-0.5 m/sec Connection: 230/400 V, 50 Hz, protection class: IP54 Drive ready for connection to the motor terminal box (Commissioning must be carried out by a qualified electrician) Polyurethane conveyor belt DM 15/2 0+005 PU including sidewalls and cleats, PU industrial belt, matte petrol Conveyor belt width: 500 mm 2 sidewalls, 50 mm high, 25 mm wide, flush with the edges, high-frequency welded Belt material: 2-ply, particularly stable laterally 17 T40 cleats welded centrally, pitch approx. 300 mm Due to the sidewalls on both sides, the usable width of the conveyor belt is reduced: Usable width 450 mm, calculated as follows: (Top view) Transverse arrangement 25+450+25mm We always have various systems of this type in stock. The delivery time for a customized system is currently approximately 3-4 weeks, depending on the production effort. Our core competence lies in providing customers with exactly what they need. We work with our customers to develop customized, individual solutions and supply corresponding systems from our own production facilities. Please feel free to contact us by phone to find a suitable solution for your application. Conveyor belt, conveyor belt system, discharge belts, belt conveyors, magnetic separators, overband magnetic separators, recycling, wood chips, plastic, metal-free metal detection, neodymium, overband magnet, magnetic belt separator All prices are net prices plus 19% VAT. All information is subject to change without notice, only while stocks last!

Condition: new, Year of construction: 2025, functionality: fully functional, Aluminum inclined conveyor belt with substructure including adjustable feet and machine feet to level uneven ground. - Feed height: 300 mm Gbsdpsv Su Stsfx Am Aer - Ascending section: 4,500 mm - Discharge height: 3,000 mm Design: Aluminum construction - Double reinforced profile 90 x 45 mm - Full-surface removal plate Drive roller + idler roller made of S235 steel, welded and machined Ø100 x 520 mm, crowned, shaft secured with clamping bearings. Drive: 0.55 kW slip-on gear motor, speed 0.3-0.5 m/sec Connection: 230/400 V, 50 Hz, protection class: IP54 Drive ready for connection to the motor terminal box (Commissioning must be carried out by a qualified electrician) Polyurethane conveyor belt DM 15/2 0+005 PU including sidewalls and cleats, PU industrial belt, matte petrol Conveyor belt width: 500 mm 2 sidewalls, 50 mm high, 25 mm wide, flush with the edges, high-frequency welded Belt material: 2-ply, particularly stable laterally 23 T40 cleats welded centrally, pitch approx. 400 mm Due to the sidewalls on both sides, the usable width of the conveyor belt is reduced: Usable width 450 mm, calculated as follows: (Top view) Transverse arrangement 25+450+25mm We always have various systems of this type in stock. The delivery time for a customized system is currently approximately 3-4 weeks, depending on the production effort. Our core competence lies in providing customers with exactly what they need. We work with our customers to develop customized, individual solutions and supply corresponding systems from our own production facilities. Please feel free to contact us by phone to find a suitable solution for your application. Conveyor belt, conveyor belt system, discharge belts, belt conveyors, magnetic separators, overband magnetic separators, recycling, wood chips, plastic, metal-free metal detection, neodymium, overband magnet, magnetic belt separator All prices are net prices plus 19% VAT. All information is subject to change without notice, only while stocks last!

Year of construction: 2020, condition: new, Aluminum flat conveyor belt with substructure Gsdpfsgggkdex Am Asbr Working height 900mm, height adjustable using machine feet 3000mm flat Dimensions: approx. 3000 x 500 x 105mm Aluminum construction: Conveyor belt width with welded corrugated edge PVC conveyor belt with T cleats. Green conveyor belt, 2-ply, particularly stable, endlessly welded with step connection * antistatic due to threads in the fabric of the running side Drive: motor approx. 0.18 kW, speed 0.4 m / sec. * controllable with frequency converter Connection 220 / 400V, 50Hz protection class IP54 Drive, motor control optional

Year of construction: 2021, condition: new, machine/vehicle number: 2021052701, Aluminum flat belt conveyor without substructure Belt length: 6000mm Drive roller: knurled Idler roller: crowned, over-rotated Gedpjg D T N Hsfx Am Aobr PVC conveyor belt Conveyor belt EM 15/2 0+17 PVC blue, FDA compliant according to EU10/2011 Belt width 500mm, outside Wave edge welded on both sides, 40mm high T-30 studs (61 pieces) - 200mm pitch * antistatic due to threads in the fabric of the running side Endlessly welded with a stepped finger joint Food-grade certificate included V2A stainless steel backing plate, full surface Drive: Motor approx. 1.1kW - horizontally mounted * optionally controllable with a frequency converter Connection 220/

Year of construction: 2021, condition: new, Aluminum angled conveyor belt including mobile substructure horizontal area 1500mm (adjustable) Rising range 2500mm (customizable) Freely selectable angle in the bend: 30, 35, 40 or 45 ° Polyamide swivel castors with locking brakes Conveyor belt width 400mm (adjustable) We deliver our conveyor belts in PVC, PU or rubber. PVC conveyor belt including carrier and corrugated edge Drive: Motor 0.25KW (adjustable), speed 0.3m / sec Connection 220 / 240V, 50Hz, protection class IP54 Drive etc. ready for connection, motor control optional 6x adjustable machine feet for alignment Wave edge: 40x35mm (customizable) T-20 studs - 400mm pitch (customizable) 2-ply particularly cross-stable Gsdehh A Uqjpfx Am Asbr Our core competence lies in delivering exactly what the customer really needs. We work together with our customers to develop customer-specific, individual solutions and deliver corresponding systems from our own production. Feel free to contact us by phone to find a suitable solution for your application. Conveyor belt, conveyor belt system, discharge belts, belt conveyor, magnetic separator, overbelt magnetic separator, recycling, wood chips, plastic, metal-free metal detection, neodymium, overbelt magnet, magnetic belt separator