Ant buy used

Recognised location: Ashburn (US) (Change)
Enter e-mail address
or
Move
1
Elect./Voltage: Tbinr73 CHANTLAND V-12 BAG FILLING LINE -- Bag filling line, previously used to fill powdered chemicals into 25 lb. - 100 lb. bags. -- Includes Chantland model V-12 gravity filler with stainless steel contacts and digital load scales. -- Includes mild steel pyramid shaped hopper to feed into filling head. -- Bags are conveyed on v-trough conveyor through filler to Fischbein band sealers for bags. -- Includes updated controls and was in working condition when removed from ... more
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Baq7swdn3n CANTEK CFS-100/EM-12 Defector and EM-12 Endmatcher DEFECT AND END-MATCHING SYSTEM consisting of a Cantek model ""CFS-100"" Optimizing Cut-Off Saw followed by a Cantek ""EM 12"" Through-Feed End Matcher and with the following specifications and features:Specifications: -- Working dimensions: 4"" x 11"" or 3.2"" x 12"" cutting capacity with 18"" x 30 mm bore sawblade driven by a 10 HP motor, 3,200 RPM arbor speed; 2.7 HP servo drive feed system d... more
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Fe7fk3z COLUMBUS MCKINNON COMPLETE TIRE SHREDDING OPERATION -- Whole tire in-feed conveyor 36"" wide x 30' long -- CM Primary (2) speed shredder with 250 HP motor with 22 knives installed -- Short shredder out-feed conveyor 24"" wide x 10' long -- Long shredder out-feed conveyor 24"" wide x 30' long -- CM Chipper shredder with 200 HP motor with 18 knives installed -- Short Chipper out-feed conveyor 30"" wide x 10' long -- Long Chipper out-feed conveyo... more
1
Elect./Voltage: Fsvrjwwe3 1993 MAZAK MULTIPLEX 610 GANTRY CNC LatheDETAILS: -- Chuck Size 6"" -- Max Diameter Bar Capacity 1.65"" -- Max Swing Over Bed 13.78"" -- Distance Between Spindles 40.55"" -- Spindle Motor 15 / 10 HP AC -- Spindle Speed 35 - 5000 RPM -- Spindle Bore 2.04"" -- Spindle Nose A2-5 -- Tools 12 + 12 -- Milling Motor 3 HP AC -- Milling Speed120 - 3000 RPM -- Rapid Traverse Rates (X & Z)945 IPM -- X-Axis Travel (L & R) 7.87"" -- Z-Axis Travel (L / R) 14.37"" / 1... more
3
38700 working hours Fanuc16MB Bbgj0yhqam XYZ 800X750X750 Palet 500x500 188 matrix tools BT40 Renishaw insidecooling 50Liter/Min 18 palet changing system more
1
Elect./Voltage: 240 V, 60 Cy, 3 Ph. M7otx PALLET HAWG M-60 Pallet Dismantler (Band)Sleekly designed band saw type that is versatile for either a One or Two-Man operation or pallet prep saw. -- Features: Pneumatic table travels 5 1/4″ to allow for easy stringer, block, or deck-board removal with 60"" wide [...] reduction drive, proper torque and speed with proven results in longer blade [...] positive mechanical tension-er ratchet with blade driving and idler tires that are readily ava... more
1
Elect./Voltage: 230/460 V, 60 Cy, 3 Ph. 9qnf7lezn CANTEK EL-610 Double Surface Planer, 24 inch. 24"" Planing width, max. working thickness: 6""; min. working thickness: 1/4""; min. working length: 12"". -- Insert cutterheads with (6) rows of carbide inserts per head; inserts are 30 mm x 12 mm x 2.5 mm. -- Feed Speed: 20 - 60 m/Min. -- Top Cutterhead with 25 HP motor; Bottom Cutterhead with 20 HP; Feed Drive with 3 HP Motor; Elevation with 1 HP Drive Motor. -- Price includes (1) spare... more
1
Elect./Voltage: 575 V, 60 Cy, 3 Ph. Bav2cione2 CANTEK GT-635 ARD Top & Bottom Head Surfacer: CANTEK MODEL GRT-635ARD DOUBLE SURFACE PLANER. -- 25"" X 8"" Capacity., min. thickness 3/8""; 11.2"" min. length capacity -- Powered by 25 HP top & 20 HP bottom head motors: belt driven helical spiral cutterheads 6,000 RPM; each head features (6) rows of 4-sided carbide inserts; 30 x 12 x 1.5mm insert knife dimension. -- Variable feed speeds from 23 - 52 FPM powered by a 5 HP motor; tables are h... more
1
Elect./Voltage: 575 V, 60 Cy, 3 Ph. L7ewjyc7 Wood Pellet Manufacturing Plant with a capacity of 4 to 5 TPH and the following major components; -- Rebuilt SPROUT Model 43245 Hammer Mill with 100 HP Motor having a capacity of 4 TPH. -- Pulse Jet Dust Collector with 40 HP Motor, Drive and Electrical Control Panel. -- Bucket Elevator 65'H with plastic Buckets. -- 10' Dia. x 40' High Bin with an Explosion Door Safety System and discharge Screw Unloader. -- Bucket Elevator 25' High Plastic... more
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. Vllr08k9 CANTEK - C-12RS Straight Line Rip Saw --Ruggedly constructed with cast iron & ground tables, cast iron pressure housing with (6) guide rollers, and solid welded steel base chassis. --Specifications: -- Saw blade dia. 8"" - 12"", saw arbor dia. 1"", saw arbor speed 4,400 RPM. -- 15 HP Saw arbor motor, 2 HP feed motor, 45 - 120 FPM variable speed range. -- Min. workpiece length 8"", max. cutting thickness 3-3/8"", distance from column to cente... more


ant
every day

New machines via email!

Be informed!
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. Bozmcvlq CANTEK SRS-330 Straight Line Rip saw --Very Rigid machine body with a welded steel frame with an integral cast & machine table, which is fitted with a sturdy cast column & saw unit. Excellent precision work accuracy and durability. Absolute straight line feeding to 13 ft. --Specifications --Max. workpiece thickness 4.33"" Min. workpiece length 8"" ÷Distance between saw and column 18.1"" -- Saw arbor diameter 1"". Saw blade diameter 10-14"". Saw... more
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Mcsox Particleboard mill with SIEMPELKAMP 5'x12', 4-opening press. The annual capacity is 26 million sq feet or approximately 130 cubic meters per average 24-hour production day. This plant is comprised of the following main components: -- 1. Blender Manufacturer: PAL, Year 1986, Size 120, Motor HP 125. -- 2. Formers Manufacturer: WURTEX 1969. Homogeneous board, number of forming heads - two. -- 3. Mat forming deckles with caul sheets - two. Forms onto... more
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Yrpge8 Chipping Plant complete with the following components and features: -- 9’x80’ Drum Debarker with 50 HP Drive Motors. -- 120' x 24"" MELLOTT Vibrating Conveyor under the Drum. -- 20 Ft. Chain Drum Discharge Conveyor. -- PRECISION 84”, 6-knife, Rear Discharge Chipper with CAT 3412E Engine. -- PROGRESS 10’x16’ Counter-flow Chip Screen. -- PROGRESS Re-chipper. -- 42"" x 100' Radial Stacker. -- 30"" x 60' Radial Stack... more
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. 3tgcv7hpz Main items from a chipping plant as follows: -- PRICE Log Crane with 34,000 Pound capacity and MACK Grapple. -- PRICE 11' x 90' Drum Debarker, comprised of (2) 45 Ft. Sections. -- PRECISION 96 inch diameter Disc Chipper with Main Drive Motor. more
1
Elect./Voltage: 480 V, 60 Cy, 3 Ph. 8epl33w3j MDF Manufacturing Facility designed around making thin door skins and will make board products as well. The plant is complete with few exceptions and boasts the following features and major components:This plant produces MDF fiber from wood chips delivered to the site by outside vendors. Such fiber is generated by a steam pressurized “digester” and pressurized disc refiner. The refined fiber is then dried and blended with resin. The ... more
1
Elect./Voltage: 575 V, 60 Cy, 3 Ph. Ba9eksh9cj Plywood Manufacturing Plant with an annual Capacity of 75,000 m³/year operating 260 days and the veneer peeling line on one 8-hour shift, and with the veneer dryer and press line in 3-shift operation. This plant was mainly producing 4’x8’ softwood plywood, but partly hardwood faces. Panel thickness range capacity is 3/8” minimum to 1-1/4” max. The plant’s major produced thicknesses were 3/8”, ½” an... more
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. 9zrjfhw Veneer Manufacturing plant with an annual capacity of over 15 million sq. feet per shift of sliced hardwood veneer. The plant, built around good quality brands, is complete with the following major components: &#9679 (SOLD) CREMONA half-round Lathe with full-round capability. Full-round attachments are included. &#9679 CAPITAL Groover. &#9679 (SOLD) CREMONA Steam Heated Veneer Press Dryer 166 inches (4.2 meter) width capacity. &#9679 BABCOCK Steam H... more
1
Elect./Voltage: 575 V, 60 Cy, 3 Ph. Ssev7o HOT SALE ! Green Line Veneer Plant with the following components: • 40 Ft., 2-strand Hl30 chain infeed deck with drive.• Hourglass rollcase reject transfer with drive.• 1-Ton KITO chain hoist with pin bar reject log grapple.• 40 Ft., 2-Strand H78 chain infeed section to lathe.• 1993 COE pin placer with 1981 DURAND Model M785 automatic lathe charger with (5) COE Model 203 (1993) displacement laser scanners.• Chevron Belt core transfer with ... more
1
Elect./Voltage: 230/460 V, 60 Cy, 3 Ph. M8037 L & L DA-50 High Frequency Glue Press50"" x 80"" platen clamping area with 54"" X 84"" press table. -- Hydraulic 4-way pressure (side & end) High Frequency Assembly Press, 2"" thickness cap. -- Press is designed & constructed on 30ø incline for ease of loading & unloading, side pressure via (14) pneumatic cylinders, each 2"" bore x 4-1/4"" stroke, end pressure via (9) 2"" bore x 4-1/4"" pneumatic cylinders. -- Top pressure is applied by (2) 3... more
1
Elect./Voltage: 480 V, 60 Cy, 3 Ph. 2qxabq CANTEK FL-08 Automatic Vertical Finger Joint Line - with the Following: -- MODEL ""F-I29-T2"" Automatic Infeed Table -- Table Size is 35” long x 23” wide and equipped with 1/2 HP motors. MODEL ""F-C07"" Auto Finger Joint Shaper, Left and Right Sides:Incoming Block Capacity: -- Block Lengths from 5.9” to 35.4” -- Block Widths with Vertical Jointing from 0.78” to 2.36”. -- Block Width with Horizontal Joint u... more
1
Elect./Voltage: Fn0rmqp Kasuga Quantum Q-1500V Vertical Machining CenterSpecifications: -- Control Fanuc 18M -- Maximum X-Axis (inches) 62 -- Maximum Y-Axis (inches) 34 -- Maximum Z-Axis (inches) 32 -- Talble X- Length (inches) 95 -- Table Y- Length (inches) 36 -- Maximum Weight on Table (lbs) na -- Cutting Feed Rate X, Y & Z (ins) 0.1 - 390 IPM -- Rapid Feed Rate X & Y (IPM) 787 -- Rapid Feed Rate Z Axis (IPM) 590 -- Spindle Nose To Table (ins) min/max na -- Spindle Center to Co... more
1
Elect./Voltage: 220/440 V, 60 Cy, 3 Ph. Bbiuzh8n23 Kasuga Quantum Q-1250V CNC Vertical Machining Center -- X-Axis travel 50"". -- Y-Axis travel 25"". -- Z-Axis travel 25.6"". -- Table Dimensions 63"" x 23.6"". -- Maximum weight on table 3300Lbs. -- Rapid traverse rate X & Y-Axis 787 IPM -- Rapid traverse rate Z-Axis 590 IPM -- Spindle center to column 27.5 -- Spindle nose to table 6.3"" - 31.9"" -- Spindle motor 25HP. -- Spindle taper CT50. -- Spindle speed 12,000 RPM. -- ... more
1
Elect./Voltage: 480 V, 60 Cy, 3 Ph. 2aqdhktz FULL FEATURED FEED THROUGH FABRIC LAMINATING [...] Coolstream Fusing Press is designed for high quality production of all types of fused garment parts. It is especially effective for high quality outerwear fabrics where high volume throughput while maintaining the highest quality standards is [...] is for these reasons that some of the largest and best-known men’s suit manufacturers around the world use the Coolstream machine for their product... more
1
Elect./Voltage: 208/220/440 V, 60 Cy, 3 Ph Baiutkvhtj WEEKE OPTIMAT BHP VANTAGE 34M FLAT TABLE MACHINE (W/ATC/BORING): -- Specifications:5' x 10' Flat Table ""Bridge Gantry"" machine with User-Friendly ""S/C Tech"" ""MATRIX"" grooved phenolic vacuum table. -- Working Area:""X"" Axis is 122"" (3,100 mm), ""Y"" axis 61"" (1,550 mm), ""Z"" axis stroke is 6.1"" (155 mm), max. material thickness of 3.1"" (80 mm). -- Positioning Speed:""X"" & ""Y"" Axis is 315 FPM (96 MPM), ""Z"" axis 82 FPM (... more
1
Elect./Voltage: 230/460 V, 60 Cy, 3 Ph. Dvyl33 WEEKE VANTECH 480 FLAT TABLE MACHINE (W/ATC): -- Specifications:4' x 8' Flat Table Bridge style gantry machine with User-Friendly ""S/C Tech"" ""MATRIX"" grooved phenolic vacuum table. -- Working Area: ""X"" Axis is 98.4"" (2,500 mm), ""Y"" axis 49.2"" (1,250 mm), ""Z"" axis stroke is 9.6"" (243.8 mm), max. material thickness of 3.9"" (99 mm). -- Positioning Speed: ""X"" Axis is 236 FPM (72 MPM), ""Y"" axis is 203 FPM (62 MPM), ""Z"" axis 82... more
3
OSP 7000 Control 7000 rpm B AXİS 1' (360 Positions) spindle taper #40 x570 y460 z510 Ba8tpexybx more
5
500 pallet size 6000 rpm gear box cat 50 Fanuc 16 Duciradfa 60 tools Chip Conveyor Coolant Through Spindle Chiller Transformer more
6
Type of fuel: Electric Field of application: Grounds care Tennant 8300 Bawdozb0fa * Wipe suction machine * Scrub suction machine * Sweep and scrub in 1 corridor * High pitcher * Electro 36 volts * Incl. charger and good batteries * Waste water tank 281 ltr * Clean water tank 216 ltr * Dirt bin 136 ltr * Emptying to 153 cm high EPA marked Latest inspection: 2017 more
6
Max sheet length: 200 Max sheet width: 300 We are pleased to offer as owners: Foilant Castor 530 SF Laminator. Year 2016. B2 Size. Serial Number: 16044227530SF. Maximum speed 50 m / min Feeding Automatic Feeding system Suction Feeding Head Feeder's load capacity 55 cm Overlaps control Automatic, PLC Control Overlaps accuracy + / - 2 mm Separation Automatic, Bump Rollers Paper weight 115 - 600 g/m2 Main roller pressure Pneumatic External compressor 200 l / min, 6 ... more
4
Ba9wbnelvxMax sheet width: 520 We are pleased to offer: Anter 520 Carton Folder, Gluer. Year 1980.-(Straight Line). folder gluer anter 520 can work a carton of 200 - 500 gms / m2 maximum working width 520mm minimum working width 45 mm straight line electronic counter glue wheel no crash lock open box maximum width 520 mm open box minimum width 45 mm open box maximum length 400 mm open box minimum length 40 mm minimum width 25 mm closed box maximum thickness of folded closed box 4mm Speed:... more
1
BOLLEGRAAF gantry crane - span 18 meter 3sctqosey - 2 x Demag P416 hoist - lifting capacity 2 x 6.3T - lifting height ca. 5.5 meter more
4
There is a vibration-damped milling recording of company Sandvik. The recording was purchased for a single use only and has only minor scuffs on Mint. Year is built around. Length 320 mm Bbj8eyug0v more
6
The item consists of 5 installations: 1. Complete bag filter with: - Hopper with sockets and rotary valve and the cochlea control unit - Central body with sleeves - Higher part with clamp and control group - Ladders and gangways - Filter / fan connection piping - Fan including motor - Air evacuation tube - Air compressor unit for material transfer 2. Complete bag filter with: - Hopper with sockets and rotary valve and the cochlea control unit - Central body with sleeves - Higher part with clamp... more
6
pressure 60 t chamfer lenght 2100 mm distance between columns 1600 mm dayligth 280 mm 7oednngii stroke 100 mm throat 200 mm oil volume 160 ltr. ajustment speed 70,0 mm/sec working feed 8,0 mm/sec return speed 55,0 mm/sec total power requirement 5,6 kW weight 4.000 kg range L-W-H 2,28 x 1,2 x 2,24 mm more
4
Faceplate, faceplate, four jaw Chuck, plan lathe Chuck Chuck size ø 450 mm Flange ø 172 mm Pitch circle ø 135 mm Through hole ø 80 mm Weight 80 kg 2puvd3 more
6
Dimensions (l x w x h) approx.: 10000 x 2000 x 2200 mm Fa92m0m3y Weight approx.: 3400 kg Description: Machine status: dismantled Operating hours 5.600 Including angular head Barcode reader various tools various tools taper Please see attached PDF-file for technical data! more
6

Edgebander with feedback system IMA Advantage Expert 6216-2/L12

Düsseldorf Germany
6383 km
2005
used
Closing bid
Auction finished
edge thickness: 0,4- 12 mm workpiece width min.: 60 mm joint trimming unit: 2 x 3 Kw workpiece pre heater: Strahler 300 lg ,2 x 1,5 KW gluing unit: Quick Lock System edge magazine with: 2- fach -fold roller snipping unit: ja/yes profile scraping unit: 2 mm radius edge buffing unit: ja/yes control: SPS IMATRONIC 121/01 Cl2gws3a refeed system: Ja/Yes total power approx: 19 KW Dimensions (l x w x h) approx.: 7600 x 1400 x 1600 mm Weight approx.: 3500 kg Description: IMA Advantage Expert 6216-2/L1... more
6

Panel Saw & Angular Plant Machine HOLZMA OPT HKL 11/43/22

Düsseldorf Germany
6383 km
2004
used
Offer
Another 18 days
cutting length: 4300 mm cutting depth: 2200 mm saw blade protection: 125 mm max. opening of clamps: 130 mm saw carriage speed forward: 5 - 130 m/min saw carriage speed reverse: 130 m/min program fence speed forward: 80 m/min program fence speed reverse: 80 m/min main motor: 18 kW scoring saw: 2,2 kW software: CADmatic setting measure approx (l x w x h): 16333 x 14956 x 2224 mm Dimensions (l x w x h) approx.: 30000 x 2450 x 2500 mm Weight approx.: 21000 kg Description: Automatic panel saw for chi... more
6
Dimensions (l x w x h) approx.: 0 x 0 x 0 mm Weight approx.: 30000 kg Description: Completion and commissioning in June 2013 Semi-automatic loader with double unit [...] model SA Version 6000/50 Electric input: 380 V ? 50 Hz Power 4 kW Pneumatic pression 6 bar bars: length 20 ? 200 mm thickness 4 ? 15 mm max. length 6000 mm Loading capacity 30 ? 50 bars Punching machine ECO.B, model MAG Serial number 200/1 Electric input 380V ? 50Hz Power 40 kW Tool changer with 21 slots Max... more
6
Dimensions (l x w x h) approx.: 1 x 1 x 1 mm Weight approx.: 1 kg Description: KVH plant for the production of structural timber. The minimum cross section is 45 x 80 mm and the maximum 120 x 240 mm. The production capacity is about 35 cubic meters a day at a cross-section of 80 x 160 mm. The system consists of the following sections (see installation plan): 1 Package infeed area with manual labelling station 2 Moisture measuring device by GANN 3 Automatic cross-cut saw by BOTTENE,... more


ant
every day

New machines via email!

Be informed!

to

to

Change search
ANT
SELL IMMEDIATELY
on Europe's market leader for as little as € 0,79 per ad.
Find out more now


Phone: +44 (0) 20 806 810 84
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machine Finder chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close