Api card buy used

Identified location: Ashburn (US) (Edit)
Enter your address
or
Move
1

APIS-Card AGFA 'UPAC'

Ditzingen, GermanyGermany dealership location
6647 km
used
AGFA APIS-Board 'UPAC' - for old and new PCs (3,3V and 5V) - for all AccuSets (800/1000/1500 normal & plus), all Avantras (20/25/30/36/44 - E/S/XT) and all Galileos (YAG/VS/Thermo) K9uyf more
1

APIS-Card AGFA 'B2'

Ditzingen, GermanyGermany dealership location
6647 km
used
AGFA APIS-Board Rev. 'B2'. For all AccuSets (800/1000/1500 normal & plus) and all Avantras (20/25/30/36/44 - E/S/XT) Gupoh7p9 more
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Cpcyqfj CEDAR RAPIDS Portable Cold Material Feed Bin System with the following Components and Features: -- (4) 8' x 10' Feed Bins with Bin Dividers. -- 8'x 24” Belt Feeders with 5 HP DC Motors, -- 30"x 50' Collecting Belt Conveyor. -- Frame Fitted with (2) Axles (No Wheels or Tires). more
4
spindle diameter:160 mm x-travel:7000 mm y-travel:3500 mm z-travel:1000 mm w-axis:900 mm rotary table::2500 x 2000 mm table load:ca. 20 t table adjustment - longitudinal:1000 mm b-axis:360 ° spindle taper ISO:50 Caetgfh2m spindle turning speed - stepless:2 - 2000 U/min feed speeds infinitely variable:1 - 5000 mm/min rapid traverse:z-16, x-y-w- 20 m/min total power requirement:125 kW weight of the machine ca.: t dimensions of the machine ca.:13,2 x 12,8 x üF 6,0 m new in 1993 retrofitted in 20... more
5

Herringbone Shaping Machine SYKES 5 E

Monheim, GermanyGermany dealership location
6405 km
used
total power requirement 10 kW max. wheel diameter 1600 mm gear width 457 mm max. module 12,5 min. module 2 spindle bore 222 mm stroke 15-120 Hub/min roll feed 0.3 - 0.84 mm/min down feeds mm/Hub electrics - voltage/frequency 380 / 50 V/Hz weight of the machine ca. 18,9 t dimensions of the machine ca. m EXTERNAL GEARS: Blank diameter:- Max 63" 1600 mm Min 0 0 Face width, double helical 0 - 18" 0 - 457 mm Face width, spur or single helical 0 - 10" 0 - 254 mm INTERNAL GEARS: Bbic9xhouf... more
1
Bbxlsklw9s Controller: PRIMACH 9000L Laser Rofin Sinar slab 3500W more
7
Artis CTM-1/32 MB-IE-CTM-1 / 32 MB-IE PROFIBUS control card, E stand, serial number according to the photo, used, good condition, 100% functional, included with com. photos Bcqgu2x8hn more
3

Dosing device Glotter Metall Rapido GM 870

Babenhausen, GermanyGermany dealership location
6588 km
good (used)
Dosing device Quark balls or baked pastries of the balls are part of the Portion of small quantities of homogeneous masses For filling pastry products in small-scale production, all in manual operation. Robust design, easy to clean. Dosing capacity infinitely adjustable. All parts in contact with the filling compound are made of stainless steel or food grade plastic. Mn8ff Weight of the device 1.4kg Dimensions: approx. 300Bx430H in mm. With stand made of stainless steel more
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Gmndq8h0k MAREN 60 Shredder with Feeding Conveyor;MAREN Model "60" Shredder with following specifications: -- Floor-mounted Pinch-belt Shredder -- Infeed Opening 60" -- Options included; Auto Shut-Off, Safety overweight Plates -- MAX-PAK Incline Feed Conveyor -- 60" Wide x 23'6" Long -- 10 HP Motor -- 2" Cleats on 48" Centers -- Sides 40" sides with 27" over belt -- Discharge height approx. 7 feet -- Includes Flared Feed Hopper, 8' head & Tail [..... more


api card
daily

New machines via email!

Stay updated!
5
max. external diameter in case of internal gears 4000 mm max. wheel diameter 3500 mm innen max. ram stroke 450 mm min. ram stroke 80 mm min. module max. module 20 min. root circle dia. (external) at module 5 200 mm min. root circle diameter (external) at module 20 160 mm tip root circle min. (internal) at module 20 640 mm min. tip root [...] (internal) at module 5 600 mm max. pitch (steel) 15 Modul max. pitch (cast iron) 20 Modul gear height -max. 1100 mm workpiece weight 20 t ram stroke 420 ... more
2

cardboard cutter Robust 120

Minden, GermanyGermany dealership location
6479 km
good (used)
cutting length: 1200 mm Dchfx2kiy more
6
Manufacturer BOA Typ PCS 6000 Year of construction 2003 Hours of operation 10,210 h Dimensions separation bed inside 6,000 x 1,765 mm (L x W) Dimensions separating bed outside without motor 6,750 x 2,435 mm (l x w) Drive power 4 kW Transport speed 25 - 67 rpm. Frequency control 25 to 67 Hz Tilt angle 67 ° Number of axles 12 pieces Number of plastic discs per axis 17 to 18 pieces Accessories: D83vym2z 1 piece feeding conveyor to the TCS 6000 1 piece discharge conveyor for the paper 1 piece conve... more
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Ncfgp BIOAPCO "C3JK38-3048BVA" TOP-FEED SHREDDER -- 30 HP motor -- Infeed opening 48" -- (36) Ripper wheels -- production capacity up to 9,000 lbs more
7

KURZSTANGENLADER KFT RAPID LOAD 12

Bruchsal, GermanyGermany
6601 km
2000
excellent (used)
KURZSTANGENLADER KFT RAPID LOAD 12 - 27-03-009 Lieferzeit: sofort Nummer: 27-03-009 Hersteller: KFT Typ: Rapid Load 12 MASCHINENDATEN Vc00tvy Baujahr: ca. 2000 L x B x H: ca. 1500 x 1200 x 1400 mm Gewicht: ca. 230 kg Sehr Guter Allgemeinzustand TECHNISCHE DATEN Steuerung: über CNC - Maschine Stangen - Durchmesser: ca. Ø 6 - 80 mm Stangenlänge: ca. 150 - 1215 mm Höhenverstellung: ca. 950 - 1250 mm Stromversorgung: ca. 24 Volt Max. Vorschubweg: ca. 1300 mm ... more
6
groove width 125 mm drawing length 1250 mm pulling force - max. 5 t stroke length max. 925 mm table surface area 550 x 700 mm workpiece weight 6000 kg cutting speed 1 - 12 m/min Gaaemc0i return speed 2 - 24 m/min feed 0,219 mm/DH total power requirement ca. 5 kW weight of the machine ca. 4 t dimensions of the machine ca. 1,5 x 1,5 x 3 m - quick adjustment for the Feed - automatic return adjustment - Oil Tank with pump - 3 Tool Cabinets - large set of toolings + accessories Tools for drawing... more
5

Longford CF100 Greeting Card Folder

3AD, United KingdomUnited Kingdom dealership location
5845 km
1991
ready for operation (used)
Nfdal We are pleased to offer: Longford CF-100 Greeting Card Folder. Year: 1991. Serial Number: 2755. Scoring, plough folding machine With return conveyor Single fold high-speed card folder: Feeds Cut-scores Folds Minimum product size: 4 inches x 4 inches Maximum product size: 14 inches x 10 inches Speeds: up to 60,000 cards per hour Good condition. Full and Complete. Available Immediately. more
6
Overview technical data paper sorting line Manufacturer Bollegraaf Year of construction 1999 Throughput rate 3 up to 6 tons/h, depending on material Installation dimensions 10,000 x 19,000 x 8,000 mm (l x w x h) Sorting cabin 6,500 x 4,900 x 3,150 mm (l x w x h), 4 sorting places, 6 disposal chutes, 4 bunker belts 1 piece feeding belt to the sorting line HBT 600-800 * 14.006 mm ? 30° 1 piece sorting belt HBGT 800 * 15,000 mm ? 10° -0° Bcbc3waw 4 pieces bunker belts HBT 800 /1,000 * 10,940 mm ... more
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Djkabgr BLOAPCO CARDBOARD SHREDDER 3CAJ-2558H -- 25 HP motor -- 3 Shafts/ CAJ Corrugated Teeth -- 58" Wide opening -- Feed conveyor with safety plate -- Discharge plenum to 14" duct -- PLC Controls -- Loaded on your truck more
4
 Start Chat

End milling machine Rapid AKF

Gütersloh, GermanyGermany dealership location
6463 km
1988
good (used)
Robust notching machine from Rapid Hmmmawj more
5
max. wheel diameter 800 mm gear width 650 mm max. module 26 min. module 0,5 grinding wheel diam. min/max. 300/120/75 mm root circle dia. min. 10 mm tip circle diameter 800 mm tooth width 650 mm [...] angle 45 - 120 ° height of profile 60/20 mm spindle speeds (infinitely variable) 0 - 4000 U/min max. stroke of grinding wheel 650 mm table diameter 600 mm table load capacity 3000 kg table bore diameter 210 mm depth of hole 700 mm table rotation speed 0 - 45 U/min grinding wheel speed 17000 Upm gr... more
5

Gear Shaping Machine GLEASON- PFAUTER P500S

Monheim, GermanyGermany dealership location
6403 km
2008
used
max. wheel diameter 500 mm gear width 200 mm max. module 10 max. workpice - swing diameter 900 mm gear hobbing diameter - external 500 mm gear hobbing diameter - internal 500 mm distance spindle center to table 690 - 960 mm total power requirement ca. 50 kVA weight of the machine ca. 11 t Hevlyse9a dimensions of the machine ca. 3,49 x 4,77 x 3,54 m SIEMENS CNC contouring control SINUMERIK 840 D with 5 axes and 1 spindle All axes/spindles with digital drive technique (SIMODRIVE 611 D) and ab... more
6
PaperSpike paper/cardboard separator Manufacturer Grumbach und Petermann GmbH Type 2000 Bcv7sbm3nf yoc 2006 more
1

VENEER CLIPPER CAPITAL 150"

North Carolina, United StatesUnited States dealership location
518 km
used
Elect./Voltage: 230 V, 60 Cy, 3 Ph. Ncbzx 150" Width cap., double-rod mechanical clutch driven with approx. 8 HP motor, twin-palm button actuation of cycle, max. (90) cycles/Min; shear cut angle with angle mounted knife. -- Motor mounted inside frame with gear drive power to flywheel, infeed table with support brackets and outfeed frame support only. -- (1) Knife included. more
4
We offer you a used metal planing by the manufacturer Klopp. Machine worked correctly until the removal. Bcvlavx2c8 Our offer is aimed at commercial persons covered in the sense of the Gewerbeordnung GewO according to § 14. The offer is subject to change reserved, sale. Please enter your full contact details to get a quote with our terms and conditions and terms of payment. Mistakes in the descriptions and offerings are subject to change! more
6
max. wheel diameter 50-2000 mm gear width 500 mm max. module 12 min. module 1 stroke 13 - 125 Hub/min Bbidaayuig roll feed 0,097 - 1,16 mm/min down feeds 0,0074 - 0,0893 mm/Hub total power requirement ca. 50 kW weight of the machine ca. 20 t required space 0 m Video available more
4

RAPID DGL-B

Makow Podhalanski, PolandPoland
7275 km
1993
good (used)
Nf3jn more
6

Gear Shaping Machine LORENZ LS630 CNC

Monheim, GermanyGermany dealership location
6403 km
2011
used
max. wheel diameter 630 mm gear width 200 mm max. module 12 Oscillation lenght 220 mm Ptokhm pitch circle internal (min/max) 250+dks / 750-2x max. distance table - work spindle 450 mm min. distance table - work spindle 15 mm no. of strokes 15-90 Hub/min no. of strokes 35-210 Hub/min no. of strokes 85-510 Hub/min feeds 2,5 - 250 mm/min roll feed 0,05 - 16,7 mm/min radial feeds 0,15-15 mm/min radial rapid traverse 2000 mm/min main drive 15 kW total power requirement 37 kW weight of the machine ... more
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. Cwi97ksa (5) Stations, single left sided milling & profile sanding unit. (2) 6" Cap. Profiling shape stations and (3) Profile belt sanding stations. min. material width 1-1/2" and max. material thickness 3-1/4". -- 1st Profile station: Dual speed 7.5 - 9.5 HP motor, 6" long spindle x 40 mm dia., tiltable, 2-speed 3,600 & 7,200 RPM motor, climb cut. -- 2nd Profile station: Same as 1st station but conventional cut. -- 3rd, & 4th Stations: "SNY45" 3 HP, 3... more
6

Morgana CardXtra

3AD, United KingdomUnited Kingdom dealership location
5845 km
2011
ready for operation (used)
We are pleased to offer: Morgana CardXtra Auto Cutter. Year 2011. Serial Number: 620E101355R. Business card cutter: 85 x 55 cm business cards. Cut Count: 421196 Bcwiu9vi8m The machine comes with 2 cutting heads, 1 in the machine and 1 spare. It cuts 5 sections of x 55cm sections No creasing attachment. Professional Card Cutter, Multi-function finishing machine. 140 business cards per minute • Takes stock up to 0.4mm (approx 400 gsm)* Cutting method: Programmable fixed long blade (p... more
6

Gear Grinding Machine HOEFLER Rapid 1500 CNC

Monheim, GermanyGermany dealership location
6405 km
2003
used
max. wheel diameter 1500 mm gear width 1000 mm Nbzrl max. module 25 min. module 1 root circle diameter 50 mm stroke length max. Axial 1000 mm Profile height max. 41 / 60 mm pressure angle ohne Einschränkungen ° max. helix angle +/- 45 ° grinding wheel diameter 400 mm grinding spindle drive 14 kW grinding spindle speed 4000 U/min cutting speed 30 (50) m/s table diameter 900 mm table load capacity - central/maximum 6000 kp workpiece height max. 2600 mm total power requirement ca. 50 kW weight o... more
6
max. wheel diameter 2500 mm gear width 510 mm max. module 25 max. wheel diameter 2600 mm spindle bore 310 mm total power requirement 30 kW Qnms33cvw weight of the machine ca. 22 t dimensions of the machine ca. 5150x3000x2400 m more
6
spindle diameter 140 mm x-travel 8500 mm y-travel 1500 (w + Spindel) mm z-travel 2500 mm w-axis 700 mm drilling depth in one stroke 800 mm control Siemens 840 C boring spindle ISO 50 milling spindle taper ISO 60 turning speed range: 49 / 7,5 - 3000 U/min. feeds 1 - 5000 mm/min rapid traverse 10 m/min tool magazin: 70 Plätze main drive motor 56 kW table-size 1120 x 1400 mm table load 12,5 t speed of turning table 1 - 720 ° / min. Machine under floor level 1300 mm weight of the machine ca. 37 ... more
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Bb0kpfzhwa CAPITAL Slicer with a 213 inch length capacity and the following additional features: -- 50 HP Main Drive. -- Still in-place connected to power for test operation but cannot be seen running a log. -- Includes loading onto Buyer's truck. more
5

Gear Shaping Machine STANKO 5 M 150 P

Monheim, GermanyGermany dealership location
6405 km
1988
used
max. wheel diameter 800 mm gear width 170 mm max. module 12 min. module 1 max. number of teeth 400 min. number of teeth 10 max. angle of teeth 23 mm max. ram stroke 200 mm dia. of shaper cutter 200 mm dividing plate diameter 672 mm taper Morse Nr. 5 faceplate diameter 800 mm Length movement of the table 700 mm Xtixnyw double strokes/min. 33 - 188 Stück electrics - voltage/frequency 380 / 50 V/Hz workpiece height max. 300 mm total power requirement 15 kW weight of the machine ca. 10,5 t dim... more
4

T-Slot Shaping Machine DROOP & REIN

Willich, GermanyGermany dealership location
6368 km
used
slot-milling length 400 mm throat 500 mm Diameter of the table 600 mm total power requirement kW weight of the machine ca. t Qnnoaxcur dimensions of the machine ca. m more
1

Rapid Radial Drilling Machine SALTEC Z 50402

Barsbüttel/Hamburg, GermanyGermany dealership location
6495 km
2014
used
bore capacity in steel (diameter):40 mm table clamping area :1050 x 405 mm thread cutting up to max.:M30 quill stroke:200 mm stroke of column:400 mm travel of upper beam:580 mm spindle taper MT:4 spindle turning speed range:40 - 2000 U/min spindle feeds:0,08 / 0,15 / 0,27 / 0,35 mm/U column diameter:220 mm distance spindle axis - column:640 mm distance between spindle nose - clamping surface:675 mm main drive:2,2 kW motor for height adjustment:1,5 kW :0,37 kW weight of the machine ca.:2800 kg ... more
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Vsfrfy CAPITAL Half-Round Slicer with a 150 inch length capacity and the following additional features: -- 50 HP Drive. -- Includes CAPITAL Knife Grinder at no additional charge. -- Fully Reconditioned to "like new"! -- This machine was reconditioned at the factory yielding a slicer value of around $300,000. Somebody went out of business and you get a real bargain price! more

Pendulum Weighing Machine RAPIDO

Bühl, GermanyGermany dealership location
6593 km
used
Höchstlast 10 kg measurement range - mm Qmvgsp0p table surface area - mm total power requirement kW weight of the machine ca. t dimensions of the machine ca. m more
13
Code 51004171314 Description Controlled rapide radialdrilling machine Make DONAU Model DANUMERIC 340 Serial No. 6110 – 3 Year 1995 Control Donau Drilling cap. in St. 60 in full 40 mm Drilling cap. in Castiron GG 22 in full 50 mm Thread cutting in St. 60 M 36 Thread cutting in Castiron GG 22 M 45 Spindle taper ISO 40 Spindle speeds stepless 15 - 2800 rpm Bcyoehy0xq Quill movement 200 mm Feeds stepless 5 - 2000 mm/min Min/max radius... more
5
cutting diameter:120 mm Bqzhqp73u cutting range min.:siehe Schnittdiagramm mm saw blade diameter:400 mm cutting lenght max.:5250 mm swivelling range:45° bis 90° Grad total power requirement:2 x 3,5 PS 380/220 V 50 Hz dimensions of the machine ca.:6000 x 1000 x 1600 mm weight of the machine ca.:800 kg Manufacturer's Description: With 400 saw blades, a wide range of ALU or PVC profile systems can be machined. Simple operation, highest precision and reliability make the DGL particularly attract... more


api card
daily

New machines via email!

Stay updated!

to

to

Edit search
API CARD
SELL IMMEDIATELY
with Europe's market leader for as little as € 0,49 per ad.
Find out more


Phone: +1 312 94 04 581
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machineseeker chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close