Used Slot Tool for sale (37,971)

Condition: used, Year of construction: 2021, turning diameter over bed 0800 mm turning diameter over slide rest 500 mm turning length 4000 mm spindle bore 105 mm spindle turning speed range 5,4 - 720 U/min workpiece weight 2500 kg bed width 600 mm spindle bore 105 mm longitudinal feeds: 0,05- 24,3 mm/U cross feed 0,05 - 12,15 mm/U rapid traverse 4 m/min main drive 11 kW total power requirement 14 kW weight of the machine ca. 8 t Pjdpsy Nd Siefx Ai Djgr dimensions of the machine ca. 6,5 x 2,5 x 2 m With 4 position tool holder, face plate with safety cover, steady rest and DRO.

Condition: excellent (used), Tool shelving unit Length 1940 mm Pgsdpfx Aozrtpyoi Dor Width 660 mm Height 1750 mm 8 shelves per side

Condition: good (used), functionality: fully functional, Year of construction: 2007, including Sheetmaster, Gripmaster, and Toolmaster Year of manufacture: 2007 Pjdpezr Ha Eofx Ai Dsgr

Condition: used, functionality: fully functional, There are several Tool-Temp controllers for sale Pjdsv E Uirspfx Ai Dogr

Condition: used, Used temperature control unit Item number: 10636 Podjuuacfepfx Ai Dogr Make Tool-Temp Up to 90°C Total height 720mm Overall length 730mm Total width 300mm

Condition: used, Tempering unit, liquid tempering unit, industrial tempering unit, Thermolator, Tool-Temp TT138 B/BP, used machine Manufacturer: Tool-Temp Type: TT 138 B/BP Overall dimensions: 1240 × 480 × 1400 mm (incl. castors) Weight: Approx. 180 kg (empty) Properties: Self-optimizing electronic microprocessor controller (MP-888) with digital display (set and actual temperature) Automatic temperature monitoring Electronic flow control with digital display and automatic minimum-flow control Pressure-increasing pump Temperature measurement at the mould Pressure relief system Leak stopper and mould drainage using compressed air Automatic filling (automatic medium fill) Max. temperature range: Water: up to 160 °C Heating capacity: 24 kW — switchable in stages (6/18), automatic switching of required heating power Cooling capacity: Indirect: approx. 85 kW at 160 °C Direct: approx. 60 kW at 60 °C Pgodpozqbmdjfx Ai Djr Pump capacity: Motor: 1.8 kW Pressure mode: max. 6.5 bar | max. 75 l/min Vacuum mode: max. 8 m H₂O Seal-less magnetic coupling drive (no mechanical seal) Connections: Medium (water): ¾" BSP female thread Cooling water inlet: 1" BSP female thread (with water filter) Cooling water outlet: 1" BSP male thread Compressed air (for mould drainage/venting): ¼" BSP female thread

Condition: used, Manufacturer: TOOL TEMP Podpfxsylaate Ai Djgr

Condition: excellent (used), For sale, Form thermostat - Tool Temp TT-188 Max. heating temperature - 90°C Medium - water Power: 9850 Watts Pedjvzb Nqjpfx Ai Dsgr The device has: - vacuum pump vaccum - vacuum tank - function of sucking the medium out of the mold - the device can be integrated with the machine, maintenance-free

Condition: like new (used), TOOL FOR ROAD BARRIERS Pgodpfehylzrex Ai Dsr LENGHT 6000mm

Condition: used, Tempering Unit, Liquid Tempering Unit, Industrial Tempering Unit, Thermolator, Tool-Temp TT134, Used machine Manufacturer: Tool-Temp Type: TT 134 Overall dimensions: 390 x 1030 x 1070 mm Pgedpfey Uddpjx Ai Der Properties: Self-control system (microprocessor) Automatic drain system Temperature monitoring and indication Automatic water filling Remote and internal temperature control Automatic air vent Water and oil medium operation Max. Temperature: 140 °C | 18–24 kW Cooling: 50,000 kcal/h Max. pump pressure: 4 bar | 100 l/min

Condition: used, Tempering unit, liquid tempering unit, industrial tempering unit, Thermolator, Tool-Temp TT168 E, used machine Manufacturer: Tool-Temp Type: TT 168 E Overall dimensions: 710 × 325 × 785 mm (incl. castors and handles) Colour: Silvergrey RAL 7001 Weight: Approx. 67 kg (empty) Properties: Self-optimizing electronic microprocessor controller (MP-888) Digital display of set and actual values Automatic temperature monitoring Electronic flow control with digital display Automatic minimum flow control Suitable for both water and oil media Temperature range max.: Water: 90 °C Oil: 150 °C Heating capacity: Water: 12 kW / 18 kW (stages: 3/9, 9/9) Oil: 6 kW (stages: 3/3) Cooling capacity: 45 kW at 90 °C Pump capacity: Pgsdpfx Aiex Emfko Dor Motor: 0.75 kW Pressure mode: max. 4.0 bar | max. 60 l/min Vacuum mode: max. 8 m H₂O Tank capacity: Min. 16 litres, max. 20 litres Connections: Medium: ½" BSP female thread Cooling water inlet: ¾" BSP female thread (with water filter) Cooling water outlet: ⅜" BSP male thread

Condition: used, Tempering unit, liquid tempering unit, industrial tempering unit, Thermolator, Tool-Temp TT168 E, used machine Manufacturer: Tool-Temp Type: TT 168 E Overall dimensions: 710 × 325 × 785 mm (incl. castors and handles) Colour: Silvergrey RAL 7001 Weight: Approx. 67 kg (empty) Properties: Self-optimizing electronic microprocessor controller (MP-888) Digital display of set and actual values Automatic temperature monitoring Electronic flow control with digital display Automatic minimum flow control Suitable for both water and oil media Pjdsy Uddcjpfx Ai Dsgr Temperature range max.: Water: 90 °C Oil: 150 °C Heating capacity: Water: 12 kW / 18 kW (stages: 3/9, 9/9) Oil: 6 kW (stages: 3/3) Cooling capacity: 45 kW at 90 °C Pump capacity: Motor: 0.75 kW Pressure mode: max. 4.0 bar | max. 60 l/min Vacuum mode: max. 8 m H₂O Tank capacity: Min. 16 litres, max. 20 litres Connections: Medium: ½" BSP female thread Cooling water inlet: ¾" BSP female thread (with water filter) Cooling water outlet: ⅜" BSP male thread

Condition: used, Tempering Unit, Liquid Tempering Unit, Industrial Tempering Unit, Thermolator, Tool-Temp TT134, Used machine Manufacturer: Tool-Temp Type: TT 134 Overall dimensions: 390 x 1030 x 1070 mm Year: 2012 Properties: Self-control system (microprocessor) Automatic drain system Temperature monitoring and indication Automatic water filling Remote and internal temperature control Automatic air vent Pgjdpfx Aijx Emd To Dsr Water and oil medium operation Max. Temperature: 140 °C | 18–24 kW Cooling: 50,000 kcal/h Max. pump pressure: 4 bar | 100 l/min

Year of construction: 2018, condition: ready for operation (used), functionality: fully functional, Tool-temp TT-137 Tool Tempering Unit, 2018, heating: 12 kW, temperature: 140°C Stock: 3 units Psdpfxozab S Hs Ai Dogr

Year of construction: 2025, condition: new, functionality: fully functional, Type: TT-108’000 Year: 2025 Operating hours: 0 h (Machine is brand new) For sale due to an incorrect purchase. Podpfx Aszhpdlji Djgr Ready for immediate delivery.

Condition: excellent (used), For sale: professional installation tool (SETTING TOOL) for KOENIG EXPANDER® components, manufactured by SFC KOENIG. Model: ExTool 040-2 Type: Setting Tool / Installation Tool Application: Installation and activation of KOENIG EXPANDER® components Manufactured in: Germany The device is designed for controlled setting (activation) of plugs, restrictors, and valves of KOENIG EXPANDER® into precision bores – without threading and without heat treatment. — Condition • Very good technical and visual condition • No cracks or damage Pjdeyc Ig Aspfx Ai Degr • Working element is straight, clean, and unworn • Normal, minor signs of use • Complete set exactly as shown in the pictures — Application • Installation of KOENIG EXPANDER® plugs • Automotive industry • Precision hydraulics • Hydraulic blocks, housings, machine components • Series production and maintenance — Set includes • KOENIG EXPANDER® ExTool 040-2 installation tool • Original carrying case • Working hose • Working container / reservoir • Manufacturer's manual • Accessories as shown in the photos

Operating hours: 38,526 h, condition: used, machine/vehicle number: 23-06757-2, Temperature control unit from the manufacturer Tool-Temp, used and untested. The unit is designed for mold temperature control, injection molding, and process engineering applications. It operates in a single-circuit system with the TT-380 controller. The medium used is oil*, with a maximum supply temperature of 360°C*. Heating capacity is 24 kW*, and pump performance is 90 l/min at 5.5 bar*. The unit is fitted with a K21R 90 S 2 motor. Recorded operating hours are 38,526; year of manufacture is unknown. Pjdpfx Ajy Suavoi Degr

Operating hours: 13,241 h, condition: used, machine/vehicle number: 24-02577-4 / TT-380, Temperature control unit by Tool-Temp AG, used and untested. This device is suitable for tool temperature regulation, injection molding, and process engineering applications. Operates with oil and water as heat transfer media in a single-circuit system. Maximum supply temperature is 360°C (oil) or 90°C (water), with a heating capacity of 24 kW. The pump delivers up to 90 l/min at 6.0 bar; the control system is MP-888. Operating hours are specified at 13,241, year of manufacture unknown. Accessories include a digital hour meter, analog pressure gauge, transport castors, and crane lugs for loading. Pjdpfoy St Urox Ai Degr

Year of construction: 1980, condition: used, Sharpening TOOL VOLLMER FINZ 4-800 Location Gorzow Wielkopolski. Conditions of delivery Pick your own Cost of delivery Client cover startup type negotiated Description Comments Pgedpfjcw Dg Dsx Ai Djr GRINDING AUTOMATIC CIRCULAR SAW WIDIOWYCH THE HYDRAULIC

Condition: used, diameter div. number 36x Psdpjww Nb Eofx Ai Dogr tool adaptor BT 40

Condition: used, diameter div. number 40x Pgjdpfx Ajww Nbxsi Der tool adaptor BT 40

Condition: used, diameter div. Podpfx Aoww Nbfei Degr number 40x tool adaptor BT 40

Condition: used, diameter div. number 56x Pgjdpfx Ajwtrzysi Dsr tool adaptor BT 40

Condition: used, diameter div. number 16x tool adaptor SK 50 Tool Package DS Pgjdpfxswtrzts Ai Dsr SK 50 Other quantities also possible! A total of approx. 600x SK 50 holder available

Condition: used, Year of construction: 2013, functionality: fully functional, Servo spindle press with screw station Rittal Top Therm: SK3304500 Pgsdpfx Aiswu Adbe Der Specification: V: 3x380-400 Watt: 25,900 Hz: 50 The Tool Temp TT-380 servo spindle press with screw station is an innovative and precise machine, ideally suited for demanding manufacturing processes. It stands out for its high accuracy and efficiency, making it a reliable solution for fast and precise screw connections. The integrated screw station enables efficient automation of the screwing process, while the servo technology ensures consistent force and motion control.