Used Aspiration System for sale (62)

Condition: excellent (used), Year of construction: 2010, I sell the complete aspiration system ELBH 5x Ventilator 7,5kW Total power apprx. 45.000 m3 / hr. Recuperation system for returning the hot air back Fjdpsrft Aiofx Ah Ujpp Full system of dust extraction hoses. pneumatic pads, safety elements included in price. Year 2010 Possible to sell immediately only as a complete set.

Condition: new, Year of construction: 2025, extraction capacity ~ 6500 m3/h engine power 5.5 kW rotation speed 3000 rpm nominal voltage 400 V, 50 Hz extraction nozzle 280/200 mm extraction speed 28 m/sec. Number of filters 35 DIMENSIONS (length x width x height) 920 x 2100 x 2250 mm weight 410 kg Filter category G Filter material polyester Noise level 80 dB without connection / 65 dB when connected via pipe to the machine Filter surface 17.1 m2 Negative pressure 3000 Pa Polyester filter, 3 microns 2 containers Drive system Fodpjv Du Tnofx Ah Ujpp Filter cleaning using vibration system with control + 850 euros for the models with fire extinguisher (Safe System) + 500 euros for the models with inverter (speed control)

Condition: excellent (used), O04018) No. 1 FILTER (Suction sub-station) - Total air flow 18,000 m3/h (estimated) _____ O04019) N° 1 FILTER (Suction Sub-stations) - Total air flow 50,000 m3/h (estimated) - Power KW approx. 90 _____ O04020) N° 1 FILTER (Suction sub-stations) - Total air flow 45,000 m3/h (estimated) - Power KW 30 approx. _____ O04021) No. 1 FILTER (Suction sub-stations) - Total air flow 45,000 m3/h (estimated) - Power KW 55 - No. 360 filter bags (each diameter mm 123 x mm 3000 H) Fpedpfx Ahjwrdw Rj Ujp _____ O04022) N° 1 FILTER (Suction sub-stations) - Total air flow 36,000 m3/h (estimated) - Power KW 55 - No. 360 filter bags (each with a diameter of 123 mm x 3000 H) _____ O04023) N° 1 FILTER (Suction sub-stations) - Total air flow ????? m3/h (estimated) - Power KW 30 - No. 180 filter bags (each with a diameter of 123 mm x 3000 H)

Condition: ready for operation (used), Technical characteristics For lubricated chips machining aluminum metal Power and Motors Fjdpfet U Uhcjx Ah Ujpp Power: 2.2 Kw Overall dimensions

Year of construction: 2000, condition: excellent (used), I sell the complete aspiration system ELBH 2x Ventilator 15kW Total power 21.000 m3 / hr. Recuperation system for returning the hot air back Full system of dust extraction hoses included in price. Fpjdpfx Aeim Ex Njh Ujp Year 2000 Possible to sell immediately only as a complete set.

Condition: new, Year of construction: 2024, The OS 3008 welding extractor is ideal for extracting smoke and fumes generated during welding, polishing, cutting or grinding rare precious metals. It can purify large amounts of harmful metal particles suspended in the air. This machine is characterized by high purification efficiency, low noise emission and takes up a relatively small area. It is adapted for extraction during arc welding, carbon dioxide, MIG/MAG method, gouge arc, welding in the gas environment. Suction power: 3000 m^3/h These extractors are equipped with high-performance filter inserts, distinguished from conventional filters by the presence of a PTFE (Polytetrafluoroethylene) membrane layer. In conventional filters, the length of the fibers of traditional filter materials such as cotton, satin, paper and other cellulose fibers is from 5 to 60 µm. Soot particles contained in the extracted smoke can remain inside the filter, blocking the filter element. When the blockage becomes too large, the ash cannot be effectively removed from the filter element, the air resistance increases and the gas flow decreases. As the filter becomes more contaminated, the filtering efficiency drops dramatically. Our filter contains a PTFE membrane layer, the fine structure of which blocks microscopic dust particles. These particles block the dust layer on the surface of the filter material. Most of the dust particles are blocked on the outer surface of the filter, not penetrating the filter interior. Over time, the particles can be removed from the filter by the flow of purified, compressed air. Air volume (m^3/h) 3000 Pressure (Pa) 2000 Filter efficiency (%) 99.9 Power (kW) 3 Filter area 30 Filter size 700 x 750 x 1700 mm Fpsdpfx Astu H N Hoh Usp Voltage (V) 380 Weight (kg) 90

Condition: used, This listing is for the Churwell PBI air sampler SAS Super with case and charger The unit is in full working condition and is ready for immediate use Churwell PBI Air Sampler SAS Super 100 L with Case and Charger The Churwell PBI Air Sampler SAS Super 100 is a widely used microbiological air sampling device designed for cleanrooms, pharmaceutical environments, operating theatres, and laboratories. It enables reliable air monitoring by collecting air-borne microorganisms onto contact plates or Petri dishes. Key Features: Sampling Principle: Designed to collect airborne microorganisms on microbiological agar by impaction, produced through controlled air aspiration. High Sampling Efficiency: The SAS Super models—such as the SAS Super 100 and SAS Super 180—can collect particles down to 1 micron. The SAS Super 100 offers a sampling rate of 100 liters of air per minute. Digital Control: Features a digital interface for setting sampling volume, duration, and storing operator information. Battery-Powered: Equipped with a rechargeable battery, allowing for multiple sampling sessions on a single charge. Comes with a charger included. Portability: Lightweight and easy to carry with a protective case, ideal for field use or portable cleanroom monitoring. Technical Specifications: Air Flow Rate: 100 liters per minute Dimensions: 10.5 × 11 × 29 cm Weight: 1.75 kg Data Management: Some models support data logging and CFR 21 Part 11 compliance (varies by version) Materials: Typically stainless steel or autoclavable materials for sterile environments Accessories and Options: Aspirating heads (stainless steel or disposable) Tripods and stands Fedpexv Dpxefx Ah Uopp Calibration adapters USB data cable (for models with digital logging)

Condition: new, Year of construction: 2022, AVAILABLE FROM STOCK : Geka plasma cutting machine GCS P-4020 table size 4000 x 2000mm incl. plasma source Hypertherm 125A incl. PRONEST HYPETHERM NESTING SOFTWARE - GEKA CNC cutting table - Hypertherm Powermax 125A - cutting capacity: steel 25mm, stainless steel 20mm, aluminium 12mm - CNC control with GproCUT 2D CAD cutting software - Nesting included. - Country of manufacture Spain incl. CE conformity. - Heavy duty base for increased support and rigidity. - CNC Tex computer control with touch screen. - Linear guides on all axes for high repeatability. - Safety cutting head to prevent damage to the cutting head. - Rack and pinion gearbox with 70kg/cm servo motors. - Fully enclosed cable drag to protect cables from damage. - Movement speed 40 meters/min. - Resolution 0.01mm. - Optional automatic lubrication on all axes. - Optional, separate suction chambers in the machine bed. - Z-axis with integrated THC (Torch Height Control) to ensure automatic cutting distance between torch and material during the entire cutting process. - Torch anti-collision system (machine stops before any collision). - Laser pointer to check X and Y axes for zero reference. - The effective cutting area for P-4020 is 4000 x 2000mm. Fodpfx Aegypcljh Uspp - Portal height Z = 100 mm. - Table with compartements for aspiration

Condition: used, functionality: fully functional, color: yellow, Year of construction: 2012, operating hours: 18,560 h, machine/vehicle number: WLHZ1418LZK061324, Year: 2012 Hours: 18k Dimensions and Working Range • Ground Clearance: 255 mm • Undercarriage Width: 2990 mm • Shipping Length: 11,200 mm • Shipping Height: 3390 mm • Upperstructure Clearance: 1465 mm • Wheelbase: 3000 mm • Width with Stabilizers on Ground: 4700 mm • Tire Size: 12.00-20 1. Boom/Stick Option 2: 7.6 m boom / 6 m stick o Maximum Height: 15,200 mm o Maximum Reach Along Ground: 13,100 mm Fedpfexrf R Nox Ah Uspp o Maximum Depth: 3,500 mm Engine and Power • Manufacturer: Liebherr • Model: D 934 L • Gross Power: 150 kW (204 hp) • Displacement: 7 L • Aspiration: Turbocharged with aftercooling, reduced emissions Operational Specifications • Operating Weight (without attachment): 36,015 kg (~79,400 lb) • Fuel Tank Capacity: 580 L (153.3 gal) • Hydraulic System Fluid Capacity: 590 L (155.9 gal) • Operating Voltage: 24 V • Alternator Amperage: 80 A Swing Mechanism • Swing Torque: 84 Nm • Swing Speed: 8.2 rpm Transmission and Mobility • Maximum Speed: 20 km/h (12.5 mph) • Undercarriage Type: Wheeled, with stabilizers for working area safety Hydraulic System • Pump Type: Liebherr variable displacement, swash plate, axial cam piston pumps • Pump Capacity: 245 L/min (64.8 gal/min) • Designed for efficient boom operation and attachment handling Key Features • High-tensile materials for durability and long service life • Versatile boom and stick options for loading, unloading, and material stacking tasks • Suitable for industrial ports, scrap yards, and heavy-duty material handling

Condition: like new (used), functionality: fully functional, Year of construction: 2015, operating hours: 10,740 h, Composed of: OPTIMO machine + CNC control panel P30L S/N 15/40 - 0083-01, CV4000 laser Working hours: 10740. Linear axis strokes: 4500x2500x1020mm (XYZ) Rotary axis strokes: A axis +- 360º continuous, B axis +- 135º. Adaptive axis stroke (with part position sensor) C axis +- 10 mm Maximum speed of the linear axes (XYZ) 50 m/min Max. combined speed of linear axes 85 m/min Maximum speed of rotary axes A,B 540º/sec Acceleration of rotary axes A,B 60 rad/sec2 Power supply 400V, three-phase, 50hz Prima Power wired remote control S/N 14/06 00489 4000W CO2 laser source Hyfra Sigma 52-S collar, installed power 53kw/58kva. Fsdpfx Ahewcfzfj Ujpp Aspiration and dust treatment system Donaldson DFPRO12, installed power 15kw/18kva. Donaldson MD2 Micro Dosing System

Year of construction: 2017, condition: like new (used), functionality: fully functional, machine/vehicle number: PII n. 1681, Impact Refiner Mill type P-II Feeding: the mill must be supplied in a regular, continuous, and consistent manner. Loading port on the front cover. Usable opening 305 x 250 mm. Cast iron housing with hinged front cover, equipped with a safety microswitch. Replaceable protective plates on the front and rear covers. Peripherally toothed grinding liners, cast in high-chromium alloy, with adjustable distance from the hammers. Disc rotor with 4 fixed high-mass hammers, cast in manganese steel. The rotor can be removed through the front cover. Shaft mounted on roller and ball bearings, grease-lubricated and protected by dustproof labyrinth seals. Perforated grid; the grid is removable through the front. Rotation speed: 1800-2400 rpm. Fpsdexrk Itjpfx Ah Uop Pulley for V-belts. Required power: 22-30 kW. Drive unit: 1 x 30 kW motor, pulley, belts, tensioner, and protective guard. Support frame for mill and motor, complete with connection for aspirated discharge.

Condition: used, Year of construction: 2021, Number of spindles 5 St. Working width 250 mm Working height 160 mm Length of the planing table 2500 mm Feed motor 4 kW Feed speed 6-24 m/min. control K2 Basic 7"-Touch KUPER SWT XL-5 AUTOMATIC PLANER AND MOULDER ----- LIKE NEW, showroom machine ! - 5 spindles: bottom, right, left, top, bottom - Speed: frequency-controlled 4,000 - 6,000 rpm, spindle 4.5 to 8,000 rpm - Width and height motor-controlled: left spindle radial upper spindle axial - Feed carrier motor-controlled - Additional motor-controlled positioning: right spindle radial and axial left spindle axial - working width 250 mm TECHNICAL DATA ----- Working width (perimeter of tools 163 mm) 15 - 230 mm Working height(perimeter of tools 163 mm) 10 - 150 mm (perimeter of tools 123 mm) 10 - 160 mm Min. workpiece length: single piece: min. 800 mm piece by piece: min. 300 mm The processing of the work pieces is depending on the following operating parameters: material, wood moisture, tools, diameter of the chip removal and feed speed. If necessary adjustments to the operating parameter have to be done. SPINDLE CONFIGURATION ----- bottom, right, left, top, bottom 1st spindle: HORIZONTAL, BOTTOM ----- Siemens IE3 motor with inverter brake 5,5 kW (7,5 HP) Diameter 40 mm Spindle length 250 mm Usabale length for tools Spindle length minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 125 - 160 mm Reference cutter Diameter difference 20 - 25mm to the cutterhead Connecting piece D = 125 mm Quick action lock nut Pro-Lock 2nd spindle: VERTICAL, RIGHT ----- Siemens IE3 motor with inverter brake 5,5 kW (7,5 HP) Diameter 40 mm Spindle length 165 mm Usable length for tools spindle length minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 112 - 200 mm Adjustment path axial 60 mm Adjustable table plate to tool radius Standard profile depth 20 mm Connecting piece D = 125 mm Aspiration individual adjustable shavings guiding plate Quick action lock nut Pro-Lock Fpodpjwgwmnofx Ah Ujp 3rd spindle: VERTICAL, LEFT ----- Siemens IE3 motor with inverter brake 7,5 kW (10 HP) Diameter 40 mm Spindle length 165 mm Usable length for tools spindle length minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 112 - 200 mm Adjustment path axial 60 mm Standard profile depth 20 mm Adjustable table plate to tool radius Connecting piece D = 125 mm Aspiration individual adjustable shavings guiding plate Quick action lock nut Pro-Lock 4th spindle: HORIZONTAL, TOP ----- Siemens IE3 motor with inverter brake 7,5 kW (10 HP) Diameter 40 mm Spindle length 235 mm Usable length for tools spindle length minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 112 - 200 mm Pressure shoe pneumatically, via linear guides dynamically adjustable Standard profile depth 20 mm Connecting piece D = 125 mm Aspiration individual adjustable shavings guiding plate Quick action lock nut Pro-Lock 5th spindle: HORIZONTAL, BOTTOM ----- Siemens IE3 motor with inverter brake 5,5 kW (7,5 HP) Diameter 40 mm Spindle length 235 mm Usable length for tools spindle lenght minus approx. 6 mm Drive, frequency-controlled...

Condition: used, This listing is for the Eppendorf xplorer plus electronic pipette The unit is in full working condition and is ready for immediate use Eppendorf Xplorer™ Plus Electronic Pipette – Single Channel The Eppendorf Xplorer™ Plus is an advanced electronic pipette designed for simplicity, precision, and reproducibility. This innovative pipette facilitates a wide range of intelligent applications such as aspirating, diluting, sequential dispensing, and reverse pipetting, ensuring enhanced productivity and flexibility in the laboratory. It helps eliminate delays caused by complicated programming or inflexible processes, allowing for more efficient workflows. Key Features: Multifunctional Rocker: The “Up is up and down is down™” principle for intuitive operation, along with easy function selection via the practical selection dial. Intuitive Interface: Operate in your preferred language with a clearly arranged color display and no sub-menus. The integrated help function ensures that guidance is always available when needed. Innovative Rocker: When the tip is ejected, the piston automatically returns to its zero position, ensuring smooth operations. ON/OFF Switch: The pipette automatically switches off during longer periods of inactivity to preserve battery life. Advanced Applications: Additional functions such as aspirating, diluting, sequential dispensing, and reverse pipetting enable more complex processes with ease. One-Time Programming: Save your programming sequences for faster handling of complex pipetting tasks. Fixed Volume Settings: You can save your desired volume settings for quicker access during repetitive tasks. Password Protection: Secure your pipette settings with password protection to prevent unauthorized changes. Individual Speed Settings: Adjust the speed parameters to your individual working pace. Maintenance Reminder: Set reminders for pipette maintenance based on time or frequency of use. Reproducibility: Consistently reproducible results with volume and speed adjustments that remain precise and reliable. Ergonomic Design: PhysioCare Concept™ reduces weight and improves balance, offering an optimally angled pipette head for better comfort and ergonomics. Fpodpfx Aexv Di Sjh Uop Spring-loaded tip cone ensures a secure fit, providing maximum tightness. Clear Display: The high-resolution color display enhances visibility, ensuring that parameters are clearly visible at all times. Applications: Pipetting: Liquids (manual and automatic) Dispensing: Timed and manual dispensing Pipetting and Mixing: Ensures thorough mixing of liquids in addition to accurate pipetting

Condition: used, Year of construction: 1988, Technical details: Fodou Nwitjpfx Ah Uopp intake capacity: 1200 m³/h aspiration hole diameter: 230 mm total power requirement: 1,1 kW weight of the machine ca.: 110 kg dimensions of the machine ca.: 1,2x0,7x2,0 m mobile compact filtering device with suction arm length = 2800mm ( suction diameter 230mm) (tube dia160mm). 3 chamber fitering system application: smoke-and dust, such as welding smoke and skome filtration test run has been proceeded succesfully *

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2018, operating hours: 2,314 h, load capacity: 3,000 kg, lifting height: 6,500 mm, free lift: 2,194 mm, load center: 500 mm, fuel type: diesel, mast type: triplex, construction height: 3,099 mm, power: 36.5 kW (49.63 HP), motor manufacturer: PERKINS, fork length: 1,000 mm, fork width: 120 mm, fork thickness: 45 mm, empty load weight: 5,500 kg, Equipment: cabin, lighting, sideshift, We are selling the machine shown in the pictures. It is equipped with a Perkins 4-cylinder naturally aspirated diesel engine and hydraulic fork width adjustment. A camera is mounted on the mast, allowing the operator to monitor the raised forks on a screen. Fork length: 1000 mm Lowered height: 3099 mm Lifting height: 6500 mm Fjdsw Tcqdspfx Ah Uopp Free lift: 2194 mm Fork width adjustment: between 500 mm and 2500 mm Coated forks cross-section: 45 x 120 mm The machine is also equipped with a radio, and the forks are joystick-controlled. The wheels are driven by a hydraulic motor. It is fitted with solid rubber tires. The tires are worn, and the tread on the large wheel is cracked. The machine operates without faults.

Year of construction: 2023, condition: as good as new (ex-display), DIBIPACK EVOLUTION: THE CUTTING EDGE TECHNOLOGY INHEAT-SHRINKING. Only one operator. Great performances for remarkable outputs. Advanced control and management of cycle. DATA SHEET SPECIFICATIONS – DIBIPACK 4255 SA EV Sealing area: mm 420×550 Sealing system: bottom blade Hold down magnet: standard Programs: 8 Unit counter: standard Power supply: 400 V – 3 Ph + N Maximum power required: kW 6 Power consumption: kW/h 2,9 Overall machine dimensions: mm 2060×700 Working plate height (on stand): mm 920 MORE INFORMATION: Fully electronically controlled (second generation board) Automatic adjustment of sealing time according to production speed Stand-by function (energy saving) Unit-counter Gas spring for hood lift The hold down solenoid keeps the hood closed until the end of the shrinking cycle Stainless steel take out conveyor belt – automatic control Take out belt adjustable in hight Active carbon filter aspirator with activated carbon (standard) Fjdsmv Ebuspfx Ah Ujpp Including 1 roll of foil And U.V.V testing

Condition: good (used), Year of construction: 1998, operating hours: 6,000 h, functionality: fully functional, machine/vehicle number: 107.40.98.165, Year 1998 Heidenhain TNC 430 710x500x500 mm - 42000 RPM Netweight 5670 kg Dimensions 2794x2997x3035* mm TECHNICAL DATA Table Dimensions 1220 x 457 mm Admitted load 1575 kg T-grooves 14 mm Number of T-grooves 5 Travels Longitudinal X 1016 mm Transverse Y 508 mm Vertical Z 635 mm Workspindle Power of AC-motor, 2-stepped gears 11kW Speed range, continuous 10-7500 min-1 Spindle speed (option) 10'000 rpm Taper ISO40 Feeds drive Feed programmable axes X, Y & Z 0 – 7620 mm/min Rapid feed axes X, Y, Z 18,0 m/min Automatisation Tool changer 20 pos Tool changing time (for nearby posts) 5,0 sec. errors and omissions excepted-data given without obligation Inventory Nr.4112006, machine equipped with  : NC Heidenhain TNC430M Milling spindle 42’000 min-1, HSK 40 E 36 tool positions Electronical handwheel Fpodpfxscl Rurj Ah Usp Tool measuring Renishaw TS27 Ethernet card Minimal quantities greasing Unilube Aspiration Lumestat Protection cabin Rotary table Air passage through rotary table Vacuum clamping (by external provider) Spray gun Chips conveyor

Condition: used, Year of construction: 2021, Number of spindles 5 St. Working width 230 mm Working height 160 mm Length of the planing table 2500 mm Feed motor 4 kW Feed speed 6-24 m/min. Control K2 Basic 7"-Touch KUPER SWT XL-5 AUTOMATIC PLANER AND MOULDER ----- LIKE NEW, showroom machine ! - 5 spindles: bottom, right, left, top, bottom - Speed: frequency-controlled 4,000 - 6,000 rpm - Width and height motor-controlled: left spindle radial upper spindle axial Fpjdpfxewgwmho Ah Uep - Feed carriage motorized adjustment TECHNICAL DATA in Detail ----- Working width (for tool diameter 125-163 mm): 15-230 mm Working height (for tool diameter 125 mm): 10-160 mm (Tool diameter up to 163 mm): 10-160 mm Min. workpiece length: single piece: min. 800 mm piece by piece: min. 300 mm The processing of the work pieces is depending on the following operating parameters: material, wood moisture, tools, diameter of the chip removal and feed speed. If necessary adjustments to the operating parameter have to be done. SPINDLE CONFIGURATION ----- bottom, right, left, top, bottom 1st spindle: HORIZONTAL, BOTTOM ----- Siemens IE3 motor with inverter brake 5,5 kW (7,5 HP) Diameter 40 mm Spindle length 250 mm Usabale length for tools Spindle length minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 125 - 160 mm Reference cutter Diameter difference 20 - 25mm to the cutterhead Connecting piece D = 125 mm Quick action lock nut Pro-Lock 2nd spindle: VERTICAL, RIGHT ----- Siemens IE3 motor with inverter brake 5,5 kW (7,5 HP) Diameter 40 mm Spindle length 165 mm Usable length for tools spindle length minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 112 - 200 mm Adjustment path axial 60 mm Adjustable table plate to tool radius Standard profile depth 20 mm Connecting piece D = 125 mm Aspiration individual adjustable shavings guiding plate Quick action lock nut Pro-Lock 3rd spindle: VERTICAL, LEFT ----- Siemens IE3 motor with inverter brake 7,5 kW (10 HP) Diameter 40 mm Spindle length 165 mm Usable length for tools spindle length minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 112 - 200 mm Adjustment path axial 60 mm Standard profile depth 20 mm Adjustable table plate to tool radius Connecting piece D = 125 mm Aspiration individual adjustable shavings guiding plate Quick action lock nut Pro-Lock 4th spindle: HORIZONTAL, TOP ----- Siemens IE3 motor with inverter brake 7,5 kW (10 HP) Diameter 40 mm Spindle length 235 mm Usable length for tools spindle length minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 112 - 200 mm Pressure shoe pneumatically, via linear guides dynamically adjustable Standard profile depth 20 mm Connecting piece D = 125 mm Aspiration individual adjustable shavings guiding plate Quick action lock nut Pro-Lock 5th spindle: HORIZONTAL, BOTTOM ----- Siemens IE3 motor with inverter brake 5,5 kW (7,5 HP) Diameter 40 mm Spindle length 235 mm Usable length for tools spindle lenght minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 112 - 200 mm Adjustment range axial 20 mm Connecting piece D = 125 mm Aspiration individ...

Condition: used, This listing is for the Rainin E4 XLS Electronic Single Channel Pipette The unit is in full working condition and is ready for immediate use Fedpfx Ahexhf E Sj Uspp Large color screen with 360° trackball/joystick and carousel menu for easy navigation Multiple pipetting modes: Standard: e.g., basic, multidispense, mix Advanced: titration, dilution, fixed‑volume, reverse pipetting True Manual mode: real‑time control over aspiration/dispense speed Independently adjustable speeds for aspirate, dispense, and mix RFID-enabled for tracking service info, calibration, and protocols (supports GLP/GMP)

Condition: used, Year of construction: 2011, For sale: CNC machining centre profit H20 Format-4 Felder - year 2011. The machine is in continuous operation and can currently be inspected under power! 3-axis centre with preparation for a 4th axis. Working area 1250x3150mm, Z height=100mm, possibility to work on two separate working zones. In 2024, the electrospindle was refurbished. All repairs and maintenance carried out by a qualified service provider. Loading is provided. Transport is the responsibility of the buyer – flatbed truck with a bed length of 7-8m required. Requirements to connect the machine: - Electric cable 5x4mm2 with a plug compatible with workshop sockets - Electrical protection (at least) 32A industrial, matched to motor power. General rule: rated current indicated on the machine (nameplate) +40% - Pneumatic connection, internal diameter at least 12mm - Compressor with capacity of at least 100l/min - Extraction/aspiration system VAT invoice provided. Price shown is net. For any questions please contact us by phone or email. Fpsdpfexg Ehdjx Ah Ujp

Year of construction: 2024, condition: like new (used), functionality: fully functional, machine/vehicle number: 40423, The MACSQuant Analyzer 16 is a benchtop, automated flow cytometer engineered for multi-parameter cell analysis, offering convenience, sensitivity, and flexibility for both research applications and advanced cell therapy workflows. As part of the MACSQuant product line, this model improves upon previous generations by delivering 16 optical parameters (i.e., multiple fluorescence detection channels) while maintaining a compact footprint and a high degree of automation. Fpsdpfx Ahsxg Ndie Ujp Typical applications include immunology, immunophenotyping, cell and gene therapy (CGT) analytics, quality control processes, and general cell biology research. Key Features & Capabilities Highlighted advantages and system features: Feature Description / Details Optics & Detection - Outfitted with three spatially separated lasers: 405 nm, 488 nm, and 640 nm. - Provides 16 detection/optical parameters (multiple fluorescence channels, plus scatter signals). - Signal detection covers FSC (forward scatter), SSC (side scatter), and multiple fluorescence channels (e.g., V1–V5, B1–B6, R1–R3), each equipped with optimized photomultiplier tubes (PMTs). Fluidics / Sample Handling - Minimum sample uptake: as little as 1 µL (recommended ~25 µL for precise volumetric counting). - Adjustable sample flow rates: 25, 50, or 100 µL/min, or automated regulation to achieve target event rates (e.g., 500, 1,000, or 2,000 events/second). - Maximum event rate: up to approximately 15,000 events/second (ALT mode). - Compatible with various sample vessels, including 1.5, 2, and 5 mL tubes, tube racks, and 96-well plates. Transition between tubes and plates is user-friendly. - Utilizes an automated robotic needle arm for sample aspiration, thorough mixing, and automated washing of both the injection port and needle before and after runs. Automation & Workflow - Full automation for maintenance routines, PMT gain calibration, fluorescence compensation, sample acquisition, and analysis. - "Express Modes" (pre-set protocols) and templates support reproducible sample acquisition and data processing workflows. - Harmonization features for cross-instrument and multi-site data alignment, promoting data standardization for multi-center studies. - Regulatory and compliance support: offers 21 CFR Part 11-compatible features (audit trail, user management, electronic signatures, and reporting), making it ideal for clinical and translational research labs. Sensitivity & Performance - High fluorescence sensitivity: e.g., for standard dyes — FITC < 110 MESF, PE < 75 MESF, APC < 100 MESF - High precision:

Year of construction: 2001, condition: good (used), machine/vehicle number: 129603-40-6, Technical data: -Saw blade size 300 x 3.4 x 32 mm -Blade rotation speed RPM -Section - at 90 ° round 90 mm - or square-80 mm -Pneumatic chucks -Material supplies automatic position control Fpjdpfxod Aai Tj Ah Uep -Easy lifting up to approx. 1000 mm -Multiple hub -Swing-arm control panel with CNC control MEP -MOT. Dust aspiration + mobile chip extraction -Drive 400 V / 1,1 kW - space requirement approx. B 2750 x H 1800 X 2000 mm -Weight approx. 600 kg

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: NT315HF0043, Control MSX-711 (Fanuc 3Li) for 5axes simult. Spindel A2-5 40 pos. ATC type Capto C5 Bar-feeder LNS MoveS2 INVENTORY NR.2180207, MACHINE EQUIPPED WITH : Control MSX-711 (FANUC 3Li) for 5 axes simultaneous machining, color screen 15’’ and dialog system MAPPS III Fpedpod Hkucjfx Ah Ujp Memory capacity up to 1000 programs Options : tools correctors (milling spindle), B tools life gestion, input of tools correctors G10, 3 interpolations, variable thread step (G34), circular threading, personalised macro, high precision contouring control (control II contour AI), card ATA 1 GB, offset tool for 5 axes machining Chips conveyor (with chain) model/500 B-axis with direct motor (DDS) ATC type CAPTO C5/ 40 positions Tools to zero setting system with automatic arm for milling spindle High-pressure cooling system type KNOLL with 500L tank, pump and paper filtration, for cooling through spindle centre Cutting fluid coolant unit Type KNOLL Linear measuring system for Axes X1 / Y / Z1 Tool monitoring system through control of main spindle motor and feed motors Automatic workpiece measuring system with touch-test RENISHAW and macro B for use in Milling spindle Light signal Automatic machine stop Workpieces receptor vat Ø52mm, L120mm 10 additional M functions Flange for cylinder, threaded ring, traction tube, bore Ø 52 Clamping chuck HAINBUCH Spanntop Axzug Nova, with stop type 100 for pieces in chuck and for jobs in bars with passage, clamping head type 32, A2-5 direct mounting, adapter Hydraulic chuck KITAGAWA, type BB206A5, Ø170mm, A2-5 direct mounting, passage Ø52mm Bar-feeder LNS, Type Move S2 Diameter of roung bars : Ø8 – 80 mm, bars length : 700 mm – 1600 mm ; loading from the front ; longitudinal shift : 470 mm ; set of guidings Ø18-20 Ø24-26 and Ø28-30 ; pushers : 1x Ø 8 – 1x Ø 15 mm ; guiding devices for main spindle Ø 21 – 26 and 31 mm Fire extinctor through carbonic gas type Tyco KLA III with 10kg CO2 Aspiration system ELBARON RON/A 3000 D-2H with full rest

Condition: used, This listing is for 1 of 2 Hamilton Microlab 600 series dual syringe dispenser Fedpfx Aexhfztoh Ujpp The units are in full working condition and is ready for immediate use General Description The Hamilton Microlab 600 Series Dual Syringe Dispenser is a semi-automated liquid handling system designed for laboratories requiring high-precision, high-accuracy fluid transfers. Built on Hamilton’s world-renowned syringe technology, it leverages positive-displacement mechanics to ensure consistent performance across a broad range of fluid viscosities and characteristics. Semi-Automated Liquid Handling With a simple touch of the hand probe button or an optional foot switch, users can actuate the dual precision syringe drives to aspirate or dispense exact fluid volumes. This ergonomic control reduces hand fatigue and enhances repeatability in routine workflows. Precision by Design Microlab 600 diluters and dispensers achieve precise and reproducible results through positive-displacement syringe drives that are independent of fluid viscosity, vapor pressure, or temperature. This makes the instrument highly suitable for complex or sensitive fluid-handling tasks such as: Serial dilutions Titrations Standard preparations Reagent distribution Sample aliquoting

Condition: used, This listing is for the Pall Life sciences Vacuum Pump DOA-P730-BN The unit is in full working condition and is ready for immediate use Key Features & Specifications Diaphragm-style vacuum/pressure pump, oilless (runs dry), high-capacity style Free-air capacity ≈ 1.1 CFM (≈ 28.3 L/min) Maximum vacuum level: ~24 in Hg (≈ 200.7 mbar) Max pressure output: around 60 psi (≈ 4.14 bar) Motor characteristics: shaded‑pole or PSC motor; ~1/8 HP, 220–240 VAC (50 Hz), drawing ~2.2 A Noise level: approximately 68 dB Port connections: ¼″ NPT(f) inlet; typical fittings for gauges/regulators (not included) Physical dimensions: ~10.25″ H × 7.625″ L (260 × 193 mm), weight around 6–7 kg (15 lbs) Operating environment: max ambient temperature ~38 °C (100 °F); continuous duty cycle Materials wetted by gas/pressure: 304 stainless steel, aluminum, Nordel®, Nomex® diaphragm Fpsdsxhftpjpfx Ah Uep Warranty: standard one-year warranty from Gast (or its distributor) What It’s Good For Medium‑vacuum tasks such as laboratory vacuum filtration, aspiration, sample concentration, or pressure applications up to 60 psi. Environments requiring a small, quiet, oil‑free pump with low maintenance needs.