Used Atlas Copco Xas 90 for sale (367)

Condition: good (used), For sale: a mobile Atlas Copco XAS 60 screw compressor with a Deutz F2L 511 diesel engine. The unit has only 613 operating hours since new. The engine is in very good condition – it starts easily and runs properly. Nedpfxezv Ei Ho Afusdb The compressor was imported from Germany. It has not been used for about fifteen years, and the compressor's screw element has seized. We attempted to repair it, and the unit was reassembled, but it currently only generates a pressure of approximately 4 bar. For this reason, it is being sold as damaged, for further repair. It may be an interesting proposition for someone who will undertake the repair of the compressor, or as a source of parts, especially the well-maintained Deutz F2L 511 engine. Engine data: * Manufacturer: Deutz * Type: F2L 511 * Power: 25 kW / 34 HP * Speed: 2800 rpm * Operating hours: 613 hours * Engine is functional, starts and runs properly The visual condition is appropriate for the age of the unit – visible signs of use, storage, and localized corrosion.

Condition: used, Year of construction: 2020, operating hours: 5,945 h,

Condition: ready for operation (used), Year of construction: 2023, operating hours: 2,222 h, functionality: fully functional, machine/vehicle number: ya3064249n0867271, overall weight: 2,450 kg, fuel type: diesel, operating pressure: 14 bar, Equipment: type plate available, For sale is a powerful, mobile screw compressor, an Atlas Copco XAS 188-14 PACE S5. The machine is in good used condition and only shows the usual signs of wear and tear from use. The compressor is ideal for professional applications in sandblasting, abrasive blasting, construction, renovation, industry, and the operation of high-performance pneumatic tools. Thanks to the PACE technology, the required working pressure can be flexibly adjusted to suit the specific application. Technical data: Manufacturer: Atlas Copco Model: XAS 188-14 PACE S5 Operating hours: approx. 2,222 h Fuel: Diesel Engine: John Deere, 4-cylinder Engine power: 104 kW / approx. 141 hp Working pressure: 5–14 bar Air flow rate: up to approx. 10.9 m³/min Emission stage: Stage V Nodpozzp N Ijfx Afujdb Control system: Atlas Copco PACE Sound power level: 99 dB(A) Design: mobile compressor on a single-axle chassis Braked chassis with drawbar Emergency stop and electronic control system are available The compressor can be inspected and test-run by appointment.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, DIESEL ATLAS COPCO XAS 67 Compressor – Serviced! The compressor is registered in Poland. Technical specifications: Capacity: 3.60 m3/min; Operating pressure: 7 Bar; Year of manufacture: 2015; Engine: KUBOTA Operating hours: 1847h! The compressor is fully functional, ready for work, and comes with a warranty. Net price: 32,500 PLN Gross price: 39,975 PLN Njdpozwmlrofx Afujdb Below is a link to a video demonstrating the machine in operation.

Condition: used, Year of construction: 1989, operating hours: 8,341 h, 1989 | Atlas Copco QAS-85 | Used Generator Set | 8341 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 5000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 20 inspection points 17 approved ✅ 3 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Good overall condition. Caution, 1989 machine without CE marking and without sockets equipped with protection against overloads, short-circuits, or leakage currents. Plan connection on the busbar set. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "41430 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: Nodpfjz Ebuuex Afusdb ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: excellent (used), Year of construction: 2016, operating hours: 3,611 h, PROD. ATLAS COPCO Nsdpfxozxxnbs Afujdb TYPE GA90 S/N API624230 YEAR 2016 POWER (kW) 90 CAPACITY (m3/min) 16.48 PRESSURE (bar) 8.5 HOURS (RUNNING/TOTAL) 3611 VARIABLE FREQUENCY DRIVE no BUILT-IN DRYER no HEAT EXCHANGER no COOLED BY (AIR/WATER) air ON TANK no DOCUMENTS no CONNECTION 2 1/2 NEW/USED USED

Year of construction: 2008, condition: ready for operation (used), Operating pressure: 13bar, volume flow: 17.07m³/min, motor power: 90kW, motor speed: 3480rpm, weight: approx. 1750kg. The frequency converter of the machine is defective. An on-site inspection is possible. Nedpfxsxmkc To Afuedb

Condition: used, Year of construction: 2022, ---- Data: Frame: Stationary Light type: LED Dimensions (L x W x H): 500 mm x 500 mm x 2200 mm Weight: 45 kg Mast type: Manual, vertical Maximum height: 3.5 m Power: 1 x 320 W Wind resistance: 50 km/h Mains frequency: 50 Hz Ndjdpfozkzc Sox Afueb

Condition: good (used), Year of construction: 2000, Screw compressor Nedpfsvi E Uyex Afusdb Manufacturer: Atlas Copco Type: GA 90 Year of construction: 2000 Power: 94 kW Pressure max: 10 bar Speed: 1,487 rpm

Condition: excellent (used), Year of construction: 2019, Equipment: compressor, ATLAS COPCO XAS88 COMPRESSOR, 5.2 m3, 2019 DIESEL compressor ATLAS COPCO XAS 88, fully serviced Technical specifications: Njdpfx Asrdf Swsfuodb capacity: 5.20 m3/min; operating pressure: 7 bar; year of manufacture: 2019; engine: KUBOTA operating hours: 1519 h!!! compressor in fully working order Below is a link to a video showing the machine in operation.

Condition: good (used), Year of construction: 2013, Atlas Copco compressor used Type: GG-90-VSD Power: 62kW Njdpetu Uhmefx Afuedb Year of manufacture: 2013 Please only view by telephone arrangement! Preferred sale to dealers, traders or exporters. All information without guarantee, errors and prior sale reserved. The seller assumes no liability for typing and data transmission errors. Of course, we also take care of all formalities Loading possible

Condition: used, Year of construction: 2018, functionality: fully functional, machine/vehicle number: API628950, Technical characteristics: Core Specifications Attribute Motor Power Max Operating Pressure Free Air Delivery (FAD) Cooling Type Noise Level Drive Type Integrated Dryer Nsdsxx Snbspfx Afujdb Voltage Dimensions (L×W×H) Weight Performance & Features Elektronikon® Touch Controller: Advanced microprocessor for monitoring, control, and remote access. RDX Synthetic Oil: Long-life lubrication for reduced maintenance. Energy Efficiency: Specific power as low as 18.9 kW/100 CFM, depending on load. Integrated Refrigerated Dryer: Ensures clean, dry air with minimal pressure drop. Oil-Water Separator: Built-in for environmental compliance and air purity. Reliability & Maintenance IP55-rated motor: Dust and water-resistant for harsh environments. No-loss condensate drain: Prevents compressed air waste and reduces downtime. Sound-insulated bodywork: Minimizes noise and vibration Machine status: WORKING

Condition: excellent (used), Year of construction: 2008, ATLAS COPCO GA90VSDFF screw compressor, equipped with a frequency converter and air dryer, recently serviced. Technical data: capacity: 17.070 m3/min; 90 kW motor; maximum pressure: 12.8 bar; operating hours: 13435 h; year: 2008. Nedpszzbyfofx Afujdb Price: 48,500 net Price: 59,655 gross The compressor is in full working order, ready for operation, and comes with a warranty. We also provide service support.

Condition: excellent (used), Year of construction: 2012, operating hours: 5,735 h, functionality: fully functional, power: 90 kW (122.37 HP), volume flow: 840 m³/h, pressure (max.): 7.5 bar, type of cooling: water, Oil-free screw compressor, Atlas Copco ZR90 Nsdpfxszqvvaj Afuedb 90 kW 7.50 bar 14 m3/min Year of manufacture: 2012 Operating hours: 5735

Condition: repair required (used), functionality: unexamined, fuel type: diesel, Year of construction: 2017, operating hours: 1,154 h, Atlas Copco XAS 68 DDG compressor, year of manufacture 2017, 1,154 operating hours, volumetric flow 3.5 m³, emergency power 12.5 kVA, connections: 1 x 230 Volt, 2 x 400 Volt, serial no. YA3064303H0461812, axle bent, compressor otherwise fully functional, ABE/registration available. Ndjdpfxsy Aktaj Afuob

Condition: excellent (used), Year of construction: 2018, ATLAS COPCO COMPRESSOR XAS58 3.0m3/min 2018r. Compressor DIESEL ATLAS COPCO XAS 58 machine after service Technical data: capacity 3.00 m3/min; working pressure 7 Bar; year of production 2018; KUBOTA engine mileage 681h!!! compressor fully operational Ndodpfxetyk Svo Afusb net price: 39500 zł gross price: 48585 zł Below is a link to the video , showing the work of the machine

Condition: ready for operation (used), functionality: limited functionality, Year of construction: 2011, operating hours: 1,192 h, Equipment: soot filter, Compressor Atlas Copco XAS 67 DDG, built in 2011, 1192 operating hours, volume flow 3.5 m³, emergency power 12.5 kVA, connections 1 x 230 volts, 2 x 400 volts, serial number YA3062566B0165583, approval available, the fuse blows when the emergency power is switched on, downstream soot filter SMF-MR Ndodpsv Rbufofx Afujb

Condition: used, Year of construction: 2018, functionality: fully functional, machine/vehicle number: API628950, Technical characteristics: Core Specifications Attribute Value Motor Power 90 kW (approx. 125 hp) Max Operating Pressure 8.6 bar to 13 bar (125–188 psi) Free Air Delivery (FAD) ~565–588 CFM; 125 psi Cooling Type Air-cooled Noise Level ~74 dB(A) Drive Type Direct drive Integrated Dryer Yes (Full Feature “FF” version) Voltage 400V / 50Hz or 460V / 60Hz Njdpfoyam Tcox Afujdb Dimensions (L×W×H) ~2179 × 1300 × 1968 mm Weight ~1500 kg Performance & Features - Elektronikon® Touch Controller: Advanced microprocessor for monitoring, control, and remote access. - RDX Synthetic Oil: Long-life lubrication for reduced maintenance. - Energy Efficiency: Specific power as low as 18.9 kW/100 CFM, depending on load. - Integrated Refrigerated Dryer: Ensures clean, dry air with minimal pressure drop. - Oil-Water Separator: Built-in for environmental compliance and air purity. Reliability & Maintenance - IP55-rated motor: Dust and water-resistant for harsh environments. - No-loss condensate drain: Prevents compressed air waste and reduces downtime. - Sound-insulated bodywork: Minimizes noise and vibration. Machine status: WORKING

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, DIESEL COMPRESSOR ATLAS COPCO XAS46DD after service! Compressor registered in Poland. Technical specifications: Output: 2.60 m3/min; Operating pressure: 7 Bar; Njdpfsx A T D Sox Afusdb Engine: DEUTZ F2M1011 Hours of operation: 1355 h!!! The compressor is fully functional, ready to work, with warranty. Net price: 13,500 PLN Gross price: 16,605 PLN

Condition: used, Year of construction: 2023, Atlas Copco XAS 58-7G Compressor Trailer, FIN: P0881834 Nsdoy Rv Iljpfx Afusdb * Kubota D1105-EF02 diesel engine * 18.2 kW / 24 hp * TEX 230PE H28 hammer * TEX 10PSKL hammer * TERRA Hammer TU 055R rock drill * Compressed air hose * Hose reel Compressor with generator, ATLAS COPCO XAS 58-7, Year of manufacture: 11/2023 Equipment: Construction compressor Atlas Copco MCT, Type XAS 58-7 G, with integrated generator 6kVA, socket: 2 x 360V / 1 x 230V. Unbraked chassis, adjustable in height, initial oil fill, crane eye, closed bottom tray, starter motor protection (SMP), overrun and parking brake, reversing automatic, spur gear, support leg (unbraked version), truck DIN tow hitch (400mm), lighting according to StVZO (German Road Traffic Licensing Regulations), operating permit. Accessories: Compressed air hammer Atlas Copco, Type TEX 10 PSKL, weight: 10.7 kg. Compressed air hammer TEX 230 PE, weight: 27 kg. Various pointed and flat chisels, asphalt chisel 115 mm wide, TERRA Hammer TU055R, TERRA compressed air hose, length approx. 15,000 mm, TERRA oiler. Original price: complete with accessories 28,000 € net. * New main inspections / safety checks or weight adjustments are available upon request. We will gladly assist you in obtaining export/transfer license plates, and we can also arrange for the transportation of your purchased vehicles within Germany. Contact us! ---- We speak the following languages: German, English and Russian! ---- No liability for printing and typographical errors, changes, prior sale and errors reserved! ---- Who are we? Leible Nutzfahrzeuge is a family-owned company based in Kehl am Rhein. Thanks to our many years of experience in the refurbishment and sale of commercial vehicles, we are a reliable partner for customers worldwide. The particular strength of Leible Nutzfahrzeuge lies in the sale of new and used commercial vehicles. On 11,000 m², you will find a wide range of vehicles. Our corporate philosophy is characterized by fairness and reliability. As customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person to assist them in the purchase or sale of vehicles. See for yourself! Our services for you: Loading of vehicles We will gladly help you with loading your purchased vehicles. Organizing special transports We will gladly help you organize special transports. Short-term registration / export license plates We will gladly help you obtain export license plates/short-term registration. Handling customs formalities

Condition: used, Year of construction: 2018, operating hours: 3,450 h, functionality: fully functional, overall weight: 23,000 kg, For sale: Plug & Play nitrogen generation system Nitrogen generator Manufacturer: AtlasCopco / AirCo Type: PSAL58SN Year of manufacture: 2018 Serial number: 2018-21968 Weight: approx. 24 tons (estimated) Temperature min./max.: +3°C / +45°C Maximum pressure: 300 bar Operating voltage: 400 volts Installed in a 40" container, insulated with intake/exhaust air vents, Winter/summer mode Activated carbon filter type AK300 Pre-/post-filter type AF267UHU Nordpol cut system type 100PlusPan 2 x high-pressure compressors, each with a capacity of 15 kW 2 x nitrogen tanks, capacity 500L / 1,000 liters each Absorption dryer type A-DRY-105 Njdpfx Aexvtl Njfusdb 2 x filter type AF85H 6 x nitrogen bundles, 300 bar 56 cubic meters per hour continuous production capacity Purity: 99.9% (depending on production capacity) Power consumption: 125 amps Transportation can be arranged upon request. If you are interested or have any questions, please send me a message. More photos and technical details available upon request. All information is provided without guarantee. Errors and prior sale are reserved. Price: Net export price. For further questions, please call. Nous parlons Français / Мы говорим по-русски We speak English / Noi vorbim românește Viber / WhatsApp / Skype For an additional charge, we will handle all customs and registration matters. For an additional charge, we will transport the vehicles to the port.

Condition: used, Year of construction: 2023, Atlas Copco XAS 58-7G Compressor Trailer, FIN: P0881834 * Kubota D1105-EF02 diesel engine * 18.2 kW / 24 hp * TEX 230PE H28 hammer * TEX 10PSKL hammer * TERRA hammer TU 055R earth drill * Compressed air hose * Hose reel Compressor with generator, ATLAS COPCO XAS 58-7, manufactured: 11/2023 Equipment: Construction compressor Atlas Copco MCT, type XAS 58-7 G, with integrated generator, 6 kVA, sockets: 2 x 360V / 1 x 230V. Unbraked chassis, height adjustable, initial oil filling, crane eye, closed bottom pan, starter motor protection (SMP), overrun and parking brake, reversing automatic, spur gear, support leg (unbraked version), truck DIN tow hitch (400mm), lighting according to StVZO, operating permit. Accessories: Compressed air hammer Atlas Copco, type TEX 10 PSKL, weight: 10.7 kg Compressed air hammer TEX 230 PE, weight: 27 kg Various pointed and wide chisels, asphalt chisel 115 mm wide TERRA hammer TU055R, TERRA compressed air hose, length approx. 15,000 mm, TERRA oiler. Original price: complete with accessories, €28,000 net. * New main inspections / safety checks or weight reductions/increases are possible upon request. We will gladly assist you in obtaining export/transfer license plates; furthermore, we can arrange for the transport of your purchased vehicles within Germany. Contact us! ---- We speak the following languages: German, English and Russian!---- No liability for printing and typographical errors, changes, prior sale and errors reserved!----Who are we? Leible Nutzfahrzeuge is a family-owned company based in Kehl am Rhein. Thanks to our many years of experience in the preparation and distribution of commercial vehicles, we are a reliable partner for customers worldwide. Ndodpoyai Euofx Afueb The particular strength of Leible Nutzfahrzeuge lies in the distribution of new and used commercial vehicles. A wide variety of vehicles can be found on 11,000 m². Our corporate philosophy is characterized by fairness and integrity. Since customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person who will assist them in the purchase or sale of vehicles. Come and see for yourself! Our services for you: Loading of vehicles We will gladly assist you in loading your purchased vehicles. Organization of special transport We will gladly assist you in organizing special transport. Day registrations / export license plates We will gladly assist you in obtaining export license plates/short-term registrations. Processing of customs formalities

Condition: used, functionality: fully functional, Year of construction: 2011, operating hours: 1,608 h, Atlas Copco XAS 67 DDG compressor, manufactured in 2011, with 1608 operating hours, a flow rate of 3.5 m³, emergency power output of 12.5 kVA, and connections for 1 x 230 volts and 2 x 400 volts. Serial number: YA3062565B0165591. Approval documentation is available. Ndodpfx Afjzbiiveusb

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2012, operating hours: 1,680 h, Compressor Atlas Copco XAS 67 DDG, year of manufacture 2012, 1680 operating hours, volume flow 3.5 m³, emergency power 12.5 Kva, connections 1 x 230 Volt, 2 x 400 Volt, Ser.No.YA3062560C0250310 Njdpfx Asu Dh Tlofusdb

Condition: excellent (used), Year of construction: 2015, ATLAS COPCO XAS137 portable compressor, equipped with an aftercooler, fully serviced. Njdpfx Afszky Nkousdb Technical data: flow rate: 7.70 m3/min; working pressure: 7 bar; year of manufacture: 2015 engine: KUBOTA operating hours: 2000 h compressor in perfect working order, ready for operation, with warranty. net price: 59,500 PLN gross price: 73,185 PLN machine imported in excellent condition. Links to videos are provided below.