Used Atos for sale (378)

Year of construction: 2020, condition: like new (used), Our Dornow potato peeling line is for sale, consisting of: Storage bunker with conveyor belt (capacity approx. 1t raw material) Potato peeler with knives 20M-AT-MS Roller inspection table Pre washer with transporter conveyers Preserving and bagging device Vacuum sealer Extra sets of brand new blade for peeler included This line can also peeling beetroots, celery and if you keep peeling cycle longer also carrots For additional monies we can add it: (slicer, metal detector.. Subject to request) The peeling line runs automatically in sequence: Dujdew R T Diepfx Afnjn The pot peeler is filled by the conveyor belt from the storage bunker after a continuously adjustable time. The peeler peels the potatoes for the infinitely variable preset time and then ejects the peeled product onto the inspection table and the sequence starts again. Depending on the quality and size of the potatoes, the system peels approx. 300 - 1000 kg of raw product per hour The pot peeler peels with minimal water consumption using a flat jet from a nozzle. Kobhyc I Hovdvmpecedl Pot peeler capacity approx. 40 kg raw material, optimum filling quantity for good peeling results approx. 25 kg Inspection table with removable tuber rinsing device Storage capacity in the water bath canning and bagging unit approx. 120 kg of peeled goods. Preserving and bagging unit with discharge belt and dosing belt for the scale as well as draining section and air and water rinsing nozzles. Single chamber vacuum sealer dimensions chamber: 600x400mm, vacuum pump capacity: 60m³/h Year of construction 2020, in use until August 2023. In very good condition and fully functional. Can be inspected on site by arrangement.

Condition: used, Vibratory Bowl Feeder / Sorting Device / Bowl Feeder / Vibratory Feeder SORTIMAT Vibratory bowl, sorting device / screw feeding with vibratory feeder for screw assembly technology Feeding system, feeding unit Manufacturer: SORTIMAT Technology GmbH & Co. Model: SM 200 Year of manufacture: approx. 2000 Top bowl diameter: 270 mm Bottom bowl diameter: 180 mm Internal bowl height: approx. 75 mm Sorting track width: 13 mm Overall height (drive + bowl with sorting track): 250 mm Control voltage: 24 Volt DC (external power supply required) Power connection: 230 Volt, 50 Hz - An external 24 VDC power supply is required for the start/stop signals (the controller does not have an internal 24VDC power unit). - REO controller type Reovib R6 / 439 for adjustable vibration speed Required space Ø x H: 270 x 250 mm Duodpfox N Ik Aox Afnen Weight: 17 kg In good condition A bowl feeder always consists of two main components: 1) Sorting bowl, in which parts are oriented 2) Drive unit, which creates vibrations in the sorting bowl through mechanical oscillations, thus moving the parts.

Condition: new, functionality: fully functional, Year of construction: 2025, actuation type: electric, Nitrogen Gas Production Capacity 30 Nm3/H Nitrogen Outlet Pressure 200 BARG Nitrogen Gas Purity % 99.999 Hourly Energy Consumption 42 kWh Dedpfx Aexrcaujfnoun Nitrogen Manifold Set 2 Pieces

Condition: used, Van Der Heijden cooling device Temperature range: 16°C - 22°C Operating time: 250 hours Cooling: 192 hours Compressor: 194 hours Pump 1: 194 hours Pump 2: 61 hours You are welcome to come by for a viewing. Duodpfxsvv Si De Afnsn We are happy to organize a cost-effective shipping company for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and take a look at our other offers. The company names and trademarks given are the property of their owners and are used only to identify and describe the products. Deviations from technical data and errors in the description of the article can occur and are reserved.

Year of construction: 2015, condition: as good as new (ex-display), machine/vehicle number: 2245, stock-No.:2245 1 used Lab Extrusion-pelletizing Batch line, condition like new, equipped with: Extruder single-screw AlphaTec type AE-S 25-30 single-screw Ø 25 mm – 30 L/D Extruder motor 3 kW- AC, screw speed range up to 130 rpm frequency controlled cylinder air cooled, elec. heating 2 x 3 kW 1x venting athm. port 1x manual screen-pack-changer Ø 42 mm 1x strand-die-head 1x water bath 1.000 x 150 mm 1x strand-pelletizer, intake width 30 mm, motor 1,1 kW – AC control board with PID, melt pressure, speed by frequency converter Dujdpod Sg Hrsfx Afnon Trial-run shortly possible, date by appointment Mire extruders ex our machine-stock Wuppertal Germany available.

Condition: excellent (used), Year of construction: 2013, operating hours: 15,159 h, machine/vehicle number: 61600, A trough vibrator (vibratory finishing machine) including centrifuge from the manufacturer Rösler is for sale. The machine is in very good condition and can be inspected on site by telephone appointment. Dujdpfxoqrr A Rj Afnsn

Condition: excellent (used), Year of construction: 2015, operating hours: 77,212 h, For sale is a mass finishing machine from the manufacturer Rösler, type R 620 Euro including centrifuge. The machine is in very good condition and can be inspected on site. Duedpetqlqiefx Afnen

Condition: excellent (used), Filling height: 220 cm Discharge height: 190 cm The machine is ready for operation Djdpeycxvzjfx Afnjun

Condition: excellent (used), Machine ready for operation. Table length: 310 cm. Width: 88 cm. Height: 152 cm. Dusdpfx Afsycxt Hjnon

Condition: good (used), Roaches 3 bath laboratory glass tinting machine Roaches 3 Bath Lab staining machine 240 V 6500 W 10 A Djdpfx Asuzhudefnjun HxWxD= 920 x 1760 x 450 mm Further articles in other sizes - new and used - can be found in our store! International shipping costs on request!

Condition: good (used), Vibrating conveyor / feeder with a length of 9 meters and a width of 0.8 meters Dodpfxowzwnhe Afnsun

Condition: excellent (used), Year of construction: 2011, Vibratory feeder for aligning under slicer, cutting machine, or dicing machine Duedpfxewykkto Afnen

Condition: good (used), Year of construction: 2011, Vibratory feeder for sale, price is for one unit Dsdpfx Aswydkgsfneun

Year of construction: 1975, condition: good (used), Compressed air breathing apparatus, respiratory protection -electric pump with emergency hand crank Dsdpfx Afjb A H Ntoneun -Distributor: with pressure gauge -Hose -Box -Handover: in its current condition as inspected -Weight: 100kg

Year of construction: 1975, condition: used, Compressed air breathing apparatus, respiratory protection -Handover: in its current condition as inspected Duedjb A Hi Depfx Afnon -electric pump with emergency hand crank -Distributor: with pressure gauge -Hose -Box -Weight: 100 kg

Condition: good (used), EA Electric Automatic Type: EA-EL 9080-170 B Electronic DC load, USB / Analogue / Master-Slave, Programmable, 80V, 170A, 2.4kW Technical data: Mains voltage 90...264 V AC Mains connection type socket Mains frequency 45...65 Hz Mains fuse T 6.3 Power consumption Max. 90 W Leakage current < 3.5 mA DC input Input voltage 80 V Input power 2400 W Input current 170 A Overvoltage protection range 0...1.03 * UNenn Overcurrent protection range 0...1.1 * INenn Overpower protection range 0...1.1 * PMax Maximum permissible input voltage 88 V Min. input voltage for IMax Approx. 2.2 V Temperature coefficient of the setting values Δ / K current / voltage: 30 ppm Voltage regulation Setting range 0...81.6 V Stability at ΔI < 0.05% Dusdpfx Aouv Eudefnen Accuracy (at 23 ± 5°C) ≤ 0.1% UNenn Display: Accuracy ≤ 0.1% UNenn Remote sensing compensation Max. 5% UNenn Current control Setting range 0...173.4 A Stability at ΔU < 0.1% UNenn Accuracy (at 23 ± 5°C) ≤ 0.2% INenn Display: Accuracy ≤0.1% INenn Rise time 10...90% INenn < 23 μs Fall time 90...10% INenn < 46 μs Power control Setting range 0...2428 W Accuracy (at 23 ± 5°C) < 0.5% PMax Display: Accuracy ≤ 0.2% PMax Resistance control Setting range 0.04...15.3 Ω Accuracy (at 23 ± 5°C) ≤1% of the final resistance value + 0.3% of INenn Display: Accuracy Included in the accuracy of the control value EL 9080-170 B: Analog interface: Setpoint inputs U, I, P, R Actual value outputs U, I Control signals DC on/off, remote control on/off, R mode on/off Message signals CV, OVP, OCP, OPP, OT, PF, DC on/off Galvanic isolation from the device Max. 400 V DC Sampling rate setpoint inputs 500 Hz Isolation: Input (DC) to housing DC minus: permanent max. ±400 V DC plus: permanent max. ±400 V + max. input voltage Input (AC) to input (DC) Max. 2500 V, short-term Climate: Cooling type Temperature-controlled fans Ambient temperature 0...50 °C Storage temperature -20...70 °C Digital interfaces Built-in 1x USB-B for communication, 1x USB-A for functions, 1x master-slave bus Slot for digital modules Optional: CAN, CANopen, Profibus, Profinet, RS232, Ethernet, ModBus TCP, Ether- CAT Galvanic isolation from the device Max. 400 V DC Connections: Rear Share bus, DC input, AC input, Sense, analog interface, USB-B, Master- slave bus, interface module slot Front USB-A Dimensions: Housing (WxHxD) 19" x 2 U x 464 mm Total (WxHxD) 483 mm x 88 mm x 538 mm Standards EN 61010-1:2007-11, EN 61000-6-2:2005, EN 61000-6-3:2006 Class B Weight ≈ 11 kg Condition: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Here we offer an ICS system. Flow rate range: 0.000 to 10.000 ml/min (analysis); 0.000 to 3.000 ml/min (capillary). Flow rate accuracy: < 0.1 %. Flow rate precision: < 0.1 %. Gradient dosing accuracy and precision: ± 0.5 % at 2 ml/min (analysis only) Pressure range: 0 to 35 MPa (0 to 5,000 psi) (analysis); 0 to 41 MPa (0 to 6,000 psi) (capillary) Dimensions (H x W x D): 14 x 8.25 x 19 in. (36 x 21 x 48 cm) Weight: 55 lb. (24.1 kg) (ICS-5000) Power supply: 9 to 265 V AC, 47 to 63 Hz The system consists of the following components: ICS-5000 plus Dual Pump 6Port Valve MXP9900-000 AFC-3000 Automated Fraction Collector RFC-10 Controller Condition: used / used Scope of delivery: (See pictures as shown) Dsdpfohh Ibtox Afnjun (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Here we offer a GRIESER tripod dissolver laboratory. Product: Grieser laboratory tripod dissolver Type: GFD 11 LST Purpose: The machine is designed for mixing of powdery solids, liquids and pastes as well as to the work of fillers. The viscosity range can be from low viscosity to Pasty range. Machine design: The laboratory stand dissolver consists of machine frame, the Lifting device, the drive for mixing tool, the telescopic hood with Spring contact pressure, the Collet and the control panel (non-ex) with control and compact controller. The container (customer) and the telescopic hood form one in working position closed mixing room. The hood is intended, a hose connection It is used according to the purpose. The drive of the mixing tool with a speed adjustment is by means of Frequency converter fitted. The arrangement, performance and speed of the Motors are indicated in the enclosed drawing of the project. On the display of the compact controller can the speed of the mixing tool, the Mixing time / mixing time, mixing sequences, as well as other functions are displayed be. Operation Switching on and off is done via corresponding buttons in the control cabinet Lifting of the mixing tool drive Lifting is carried out of the hub motor is switched on. This runs only as long as the Push button (2-hand safety circuit on-on) is pressed. After releasing the button Dujdpfsd Edm Sex Afnsn

Condition: good (used), EA Electric Automatic Type: EA-EL 9080-200 EA Elektro-Automatic Electronic Load (2,4KW) 0-80V 0-200A Technical data: Mains input: Mains voltage 115V/20V switchable Dsdpouv Ewrefx Afnoun Mains frequency 50/60Hz Mains fuse T2.5A DC input: Input voltage U rated 0...80V Input power P rated 0...2400W, with temperature-dependent derating Continuous power 1500W at 20°C environment Input current I rated 0...200A Overvoltage protection limit 1.1 * U rated Maximum permissible input voltage 100V Voltage regulation: Setting range 0...80V Resolution display 100mV accuracy

Condition: used, GRIESER Type: VPL 3.0 Total volume of mixing chamber 3.0 liters Usable volume 0.3 to 2.0 liters Pressure in mixing chamber 0 to 1.2 abs. Pressure in stainless steel double jacket: N/A Critical speed 1800 rpm Speed range under load Blade mixing tool 38-282 rpm Dodpfov E I N Esx Afneun Scraper 9-90 rpm Rated voltage: 3/PE/50Hz, 400V L/PE/N/50Hz, 230V Control voltage: 24V DC Power: 1.3KW Rated current: 5.0A Main switch: 32A Fuse: 16A Weight: 250 kg Sold ex location! Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Here we offer a Despatch lab oven. Despatch Laboratory Ovens + 8 "WAFER LCC: Maximum temperature 260 ° C Lockable circuit breakers turn on the control panel for easy maintenance Djdpfx Afjd Nfq Iensun Protocol 3 control with large LCD display, built-in data logging capabilities and USB port for easy oven setup and data export Edelstellenne room with interior seams welded continuously on the insulation side to protect the working space from pollution Programmable door locking prevents the operator from opening the oven door while the cycle is running The door lock switch turns off the heating when the door is open The rolled air flow consists of 100% HEPA (High Efficiency Particulate Air) and is filtered to ISO Class 5 (Class 100) throughout the process cycle The Magnehelic Manometer monitors the pressure drop of the HEPA filter so you know when to replace the filter Electric door unlocking for ergonomic operation UL & C-UL Listed Control Panel Open Modbus communication connection (RS485) for remote monitoring and recording Chamber measure L 350 mm Chamber measure B 350 mm Chamber Measure H 350 mm Maximum temperature 260°C Digital screen Yes Electric connection 230 V Total size L 830 mm Total dimensions B 910 mm Total Measure H 560 mm Type: LCC1-16NV-3 Condition: used/used Delivery: (See picture) (Changes and errors in technical D

Condition: excellent (used), EA Elektro Automatik Model: EA-PS 8080-170 3U EA Elektro-Automatik EA-PS 8080-170 3U 19" Rack – Laboratory Power Supply 0-80V / 0-170A, 5000W For sale is a high-quality programmable laboratory DC power supply from the renowned manufacturer EA Elektro-Automatik GmbH & Co. KG. This is the EA-PS 8080-170 3U model with an output power of up to 5000 W. Key features: - Autoranging (flexible combination of V/A up to maximum power) - Remote sense (up to 2.5 V compensation) - Low ripple: < 10 mV RMS / < 100 mV pp - Multiple interfaces for external control: USB, RS-232, CAN, LAN (Ethernet), GPIB (IEEE488), Profibus - Analog control (0–5 V / 0–10 V) - Fan-cooled, robust industrial design Technical data: - Output voltage: 0 … 80 V DC Dsdpow S T Rljfx Afneun - Output current: 0 … 170 A - Maximum power: 5 kW - Construction: 19" rackmount, 3U - Efficiency: approx. 93% - Weight: approx. 20 kg Scope of delivery (see photo): - EA-PS 8080-170 3U power supply - Power cable (Specifications and technical details subject to change and errors!) For further questions, feel free to contact us by phone.

Year of construction: 2013, condition: excellent (used), For sale: 14-head combination multihead weigher YAMATO OMEGA (practically unused, with an additional set of new buckets and chutes), Djdjwxw Szopfx Afnsun

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: ZCVS250, total width: 1,100 mm, total height: 950 mm, overall weight: 350 kg, input voltage: 380 V, warranty duration: 24 months, nominal power: 1.13 kW (1.54 HP), power: 1.13 kW (1.54 HP), workpiece width (max.): 190 mm, workpiece length (max.): 190 mm, Equipment: CE marking, ZCVS 250 CIRCULAR TYPE OF VIBRATORY MACHINE * Net 250 liter volume (Capacity between 125lt to 1250lt is available up to request) * Highly wear resistant P.U.Lining (90 Shore) * Dosing pump included. * Changeable valf for the wastewater decharging *According to requested diameter size for seperator MOTOR: * High performance three phase current drive motor. * 1,1 kW 1500 rpm (Italian OLI) * The motor is lubrication free. You don’t need motor lubrication. Duedpjrkmv Sofx Afnsn CONTROL PANEL: * Main switch and emergency stop switch. * Timer and working hours timer * Control box with switch for engine right/left running * CE safety standard PAINTING: *Colour in RAL 5003 & RAL 7001 *Epoxy paint is used to ensure long life of the paint.

Condition: new, Year of construction: 2025, functionality: fully functional, total length: 1,370 mm, total width: 1,370 mm, total height: 1,020 mm, overall weight: 360 kg, input voltage: 380 V, warranty duration: 24 months, nominal power: 1.9 kW (2.58 HP), power: 1.9 kW (2.58 HP), workpiece width (max.): 240 mm, workpiece length (max.): 240 mm, ZDV Series - Circular Type Dryers For drying after deburring and polishing Corn granule is used. Various volumes in the range of 125lt - 1650lt Includes seperating system- Resistance heated Drying for all kinds of metal and non-metal materials Suitable for automation system Optional accessories Dryer machines are used to dry the wet surfaces of the parts after the process in surface finishing machines where deburring, polishing, etc. are performed. At the same time, dryer machines help to prevent corrosion of the parts Corn cobs are used in dryer machines. Hot corn cobs absorb water from the surface of the parts during process. The dryer machines have a heating system with resistance. By the help of heating system, the drying speed increases and it saves time and energy. On the machine, there is a material loading point in order to transfer wet parts to the machine easily and a discharge slider which can take out the parts after drying easily. During drying process, the parts and corn cobs move through the ramp in the bowl to the self-discharge way. Activating the slider is enough to take out the dried parts. Thanks to ergonomically designedchassis height and springs, staff can work with high efficiency. Increased resistance against vibrations, rigid and reinforced support construction; adjustable insulators flexibly mounted to absorb vibrations are some of the distinctive design features of the machine chassis. Electrical panels with CE Certificate designed in accordance with EU standards are used. There are main switch and emergency stop switch. The working time controller and time clock are included in the standard equipment. Three-phase electrical connection is used. It can work integrated with automation systems with PLC software. Dust absorbing system is available as an option. Dujdpfel Sm N Tsx Afnsn The dimensions of the dryer machines are designed to work integrated with the previous processes surface finishing machines. Therefore, the products from the first process are able to be transferred to the material loading point of the dryer automatically.