Used Automatic Strapping Machine for sale (76,585)

Condition: good (used), Year of construction: 1989, double-sided processing from 280 to 2500 mm Fsdpfx Ajzzprpsl Ujpn the following equipment is available on each side: saw drilling head with 3 drills dowel inserter 3 drilling units from above, at the front 2 drilling units from above, at the rear return transport from below

Condition: good (used), TWQ-720RD Automatic Hot Foil Stamping Machine This machine is brand new. Very fast setup. Embossing and hot foil stamping capabilities, with two independent foil feeds. Fpedpfozv Niwox Al Usn Servomotor control for fast and precise operation. Technical specifications: Maximum sheet size: 720x600mm Min. sheet size: 150x120mm Material weight: 120-2000g/m² Maximum throughput: 1200 sheets/h Power consumption: 13kW + compressed air Weight: 2000kg Foil feed: 1-550mm Operating temperature: 50-150°C Power supply: 380V Approximate machine dimensions: 270x160x220cm Equipment: – Control panel with touchscreen PLC – Two independent foil feeds, controlled by stepper motors – Sectional heating plate – Built-in compressor

Condition: repair required (used), Year of construction: 1978, functionality: not functional, machine/vehicle number: 212 393, ram adjustment: 100 mm, pressing force: 160 t, stroke adjustment: 80 mm, overall weight: 18,000 kg, punching force: 160 t, We are offering this Haulick-Roos RVD160-1250 stamping press, manufactured in 1978, which requires repair. Pressing force during continuous operation: approx. 1600 kN Max. distance between table and ram: 350 mm Distance between the uprights along the length: 1250 mm Opening on the uprights, width x height: 640 x 460 mm Through hole in the table: 1000 x 250 mm Ram surface, width x depth: 1200 x 900 mm Dowel bore in the ram, diameter x depth: 50 mm Adjustable ram stroke: 20 – 100 mm Ram adjustment: 100 mm Stroke adjustable in infinitely variable steps: 50 – 300 mm Drive power: 22 kW Weight: approx. 18,000 kg incl. uncoiler and feed machine Uncoiler with feed machine: Manufacturer: Schleicher Type: 6-70 RM 76 Max. coil weight: Strip thickness: 0.5 – 4 mm Max. coil width: 650 mm Max. coil diameter: 1400 mm Fpodpfszdf Utsx Al Uen Power: 5.5 kW Year of manufacture: 1978 Feed and control: Including pre-piercing software ASTA All data are approximate. Technical specifications/equipment are non-binding and without guarantee. The machine is sold without any warranty or guarantee. Sale exclusively ex works, for dismantling or at additional cost. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2006, functionality: fully functional, Automatic strapping machine. Fpsdsz Dp Rnspfx Al Uen

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, overall weight: 500 kg, See also homepage: bdtronic.com/de-de/heissnietanlagen/vollautomatisch-heissnieten/ Furthermore, there are other similar machines. Fpsdpfxoy Nzhbo Al Uon Currently physically located at the subsidiary plant.

Condition: not inspected (used), Year of construction: 1983, functionality: fully functional, machine/vehicle number: 4619, Gubisch UFA with 4 spindles, 1st spindle: synchronized rotation 2nd spindle: counter-rotation 3rd spindle: counter-rotation 4th spindle: counter-rotation Working height 115 mm, Spindle speed 6,000 rpm, Spindle diameter: 1 x 30 mm and 3 x 40 mm, Largest working diameter D = 220 mm, Fpodpfeznkyujx Al Ujn Smallest working diameter 100 mm, Total power consumption 19 kW, 380 V, 50 Hz, Weight approx. 1,850 kg, in “as is” condition, as inspected, available from the Seevetal warehouse, Ex works, excluding transport, subject to prior sale.

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 001, We offer for sale a custom-built automatic cutting machine AMT Plus PVA, designed for high-volume production of short wooden components from pre-machined timber profiles and square sections. The machine automatically feeds, positions, clamps and cuts workpieces according to preset dimensions, ensuring high productivity and repeatability. Technical Specifications Manufacturer: AMT Plus s.r.o. Model: PVA Year of manufacture: 2018 Workpiece dimensions: Min.: 12 × 40 × 300 mm Max.: 70 × 160 × 800 mm Installed power: 40 kVA Power supply: 400 V / 50 Hz Air pressure: 0.6 MPa Air consumption: approx. 4.5 m³/h Features Servo-controlled positioning system Frequency-controlled saw drive Pneumatic clamping Multi-blade cutting unit Integrated waste conveyor Fully enclosed safety guarding with dust extraction connections Fsdjzyrdljpfx Al Uspn Dimensions Approx. 3500 × 1320 × 2140 mm Condition Fully functional Good technical condition Available for inspection and testing Applications Ideal for the production of: furniture components hardwood blocks flooring elements window and door components other precision-cut wooden parts Sale Terms Available immediately Dismantling and transport to be arranged by the buyer Custom-built machine originally developed for accurate cutting of short wooden components in serial production.

Condition: good (used), Year of construction: 2013, Automatic cardboard edge wrapping machine, Mosca, – used: Price: only €4,950 (net) ex works! Manufacturer: Mosca Fpodpjzpf Ipefx Al Uon Type: Sonixs TR CE Year of manufacture: 2013 Machine number: 106880 2L+PE, 50-60Hz, 400V, 2.5A, 16A, Condition: good, Available: immediately Location: Erfurt area

Condition: repair required (used), Year of construction: 2006, functionality: limited functionality, type of input current: three-phase, SMB strapping tandem, year 2006, with parcel turner from 2010, three-phase power supply, operates with strapping band mm. Maintenance required: replacement of belts and conveyor bands on the strapping machines and belts on the parcel turner (the rollers show significant wear). There is a part to repair or replace on the compressed air cylinder (see photo). Fjdpfx Aleyybbvj Uspn

Year of construction: 1995, condition: good (used), The bender can bend aluminum and plastic, Fpjdpfjrif U Eex Al Usn Total length: approx. 11500 mm, depth: 1600 mm.

Year of construction: 2007, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: BA 32-200, SICA MUFFENMASCHINE 2F.1T 32-200 Application: KG-U PVC pipes, Pipe lengths: 0.5 m, 1 m, 2 m, 5 m, 6 m Year of manufacture: 2007 1 socket per cycle Socketing tools: 110×3.2 The socketing machine is in very good condition, still operational and scheduled to be taken out of production in 3-4 months. Fjdoxiy R Espfx Al Ujpn

Condition: new, Year of construction: 2026, functionality: fully functional, Automatic carton sealing machine with label printing | 220V | NEW Description Fpjdpfszwch Nsx Al Usn For sale is a new automatic carton sealing and labeling machine for professional use in shipping, logistics, e-commerce, fulfillment, and production. The system combines automatic carton sealing with adhesive tape with an integrated real-time label printing system. This allows cartons to be sealed and then labeled with individually generated labels within a single process. According to the manufacturer, the integrated thermal printing system supports barcodes, dates, logos, and other variable label information. Ideal for companies with regular package and carton shipping, as well as for integration into existing packaging and conveyor systems. Technical data according to the manufacturer: Capacity: approx. 800–1,000 cartons/hour Carton length: from 130 mm Carton width: 80–300 mm Carton height: 90–400 mm Adhesive tape width: 30–50 mm Power supply: AC 220 V / 50 Hz Power consumption: 1.83 kW Machine dimensions: approx. 2,400 × 800 × 1,680 mm Machine weight: approx. 180 kg Operating temperature: –10 °C to +50 °C Features / Functions Automatic carton sealing Sealing of top and bottom Integrated labeling system Real-time label printing Support for barcodes, date, logos, and other information Touchscreen operation Adjustable parameters Status and error display Roller conveyor technology Suitable for different carton sizes Suitable for integration into automated packaging processes Typical applications Mail-order business, e-commerce, fulfillment centers, warehouses and logistics, production facilities, packaging companies, and industrial end-of-line packaging. The machine is particularly suitable for companies that want to automate carton sealing and labeling in a single process. Condition: New Scope of supply and delivery time: upon request. If you are interested or have technical questions, please send us a message. We will also be happy to assist you with the planning of other packaging machines and automation solutions. Note: Technical specifications are based on the manufacturer's documents. Images may show optional equipment. Subject to technical changes and errors.

Condition: used, Technical specifications Weight: 42 kg Fpsdpfx Aoz I R S Uol Uon Dimensions: 920 × 750 × 1350 mm Clear working height: 1000 mm Leg length: 920 mm Magazine capacity: 300 pieces Max. pressure: 7 Clamping leg length: 15–22 mm

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 150 350, total height: 4,600 mm, ram adjustment: 150 mm, installation height: 550 mm, table height: 1,000 mm, total width: 3,000 mm, total length: 4,200 mm, drop-through hole in table: 1,400 mm, table length: 3,000 mm, table width: 1,250 mm, pressing force: 250 t, control cabinet height: 2,000 mm, control cabinet length: 6,800 mm, control cabinet width: 600 mm, type of input current: three-phase, stroke length: 180 mm, stroke adjustment: 20 mm, input voltage: 400 V, distance between side stands: 810 mm, distance between stands: 2,020 mm, overall weight: 45,000 kg, control voltage: 24 V, year of last overhaul: 2026, input frequency: 50 Hz, ATTENTION: The machine will be completely cleaned before delivery. Fairings will be repaired if possible and deemed appropriate. Pressing force: 2500 kN Adjustable stroke: 40 - 180 mm Ram adjustment: 150 mm Stroke rate: 20 - 150/min Installation height for tool: 550 mm Table dimensions: 2000 x 1250 mm Ram dimensions: 2000 x 1000 mm New control system: SIEMENS S7 300, 1st generation, control system designed according to VW specifications. Upon request, the machine can also be completely overhauled by ANDRITZ Kaiser, with a new S7 1500 control system. Fpedszrwzaopfx Al Ujn

Condition: good (used), Year of construction: 1986, functionality: fully functional, Machine Name - Benelli 1000 Tonne press Machine Model - Automatic transfer press PMT/3d/1000/5/1000P Y.O.M 1986 (Retro-fitted 2015 by Helm) Description - 1000 ton SPM up to 26 Fodpfxsz Nhx Ao Al Ujpn Number of operational positions: 5 Press bed 5000mm x 2000mm Main carriage 5100mm x 1400mm second carriage Lateral opening between columns: 2500 mm Voltage power supply: 415V; 50 Hz Shut height range 730mm- 1070 Light guards Schlechier decolier : Coils up to 10ton and 1.2m wide, ID 500mm OD 1500mm Can be seen underpower from site.

Condition: good (used), functionality: fully functional, total height: 2,100 mm, total width: 1,400 mm, table length: 480 mm, table width: 450 mm, pressing force: 30 t, distance between side stands: 280 mm, year of last overhaul: 2026, Stroke: 16-40 mm Strokes per minute: 100-600 Fpsdpjz Hk I Tofx Al Uon

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 150 302, total height: 4,600 mm, ram adjustment: 150 mm, installation height: 550 mm, table height: 1,000 mm, total width: 3,000 mm, total length: 4,200 mm, drop-through hole in table: 1,400 mm, table length: 3,000 mm, table width: 1,250 mm, pressing force: 250 t, control cabinet height: 2,000 mm, control cabinet length: 6,800 mm, control cabinet width: 600 mm, type of input current: three-phase, stroke length: 180 mm, stroke adjustment: 20 mm, input voltage: 400 V, distance between side stands: 810 mm, distance between stands: 2,020 mm, overall weight: 45,000 kg, control voltage: 24 V, year of last overhaul: 2026, input frequency: 50 Hz, ATTENTION: The machine will be completely cleaned before delivery. Fairings will be repaired if possible and deemed appropriate. Pressing force: 2500 kN Adjustable stroke: 40 - 180 mm Ram adjustment: 150 mm Stroke rate: 20 - 150/min Installation height for tool: 550 mm Table dimensions: 2000 x 1250 mm Fjdpszrwypsfx Al Uepn Ram dimensions: 2000 x 1000 mm New control system: SIEMENS S7 300, 1st generation, control system designed according to VW specifications. Upon request, the machine can also be completely overhauled by ANDRITZ Kaiser, with a new S7 1500 control system.

Condition: good (used), CMC Ariemat ARM 75 Automatic Cardboard Creasing Machine The machine is fully operational and ready for production. Like new. This highly efficient creasing system is ideal for the production of binders, hard covers, and more. Made in Italy. Sheet feeding is manual, while the machine handles the rest automatically. An automatic feeder can also be added (optional). Parameters are set from the control panel and jobs can be saved to the machine’s memory. Materials processed range from 200 GSM to 4 mm cardboard. Sturdy construction, weighs 750 kg. Adjustable creasing and counter-creasing widths. Stepper motor control. Fast operation, up to 2400 sheets/hour. Sheet size: 750 x 1400 mm. Two sheet guides with an extended table and pressure rollers. Fpsdpfx Aozw Typjl Uon Quick machine format conversion in less than 1 minute. Receiving table included.

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, total width: 2,200 mm, total length: 3,200 mm, total height: 2,610 mm, Automatic racking car unloading machine Manufacturer: Makor Type: ACR 2 CE marking The machine comes from a finishing plant (painting) for flooring and furniture profiles. Automatic unloading device for racking cars / transfer from drying car to machine lines for further processing. The machine facilitates the transfer on automatic lines of profile wood and strip stock stored in drying cars/racking cars. 2 transfer arms Fpsdpfoz A T Eyex Al Ujn Part lengths: approx. 1700 - 3000 mm (or even longer, depending on the part thickness) Part widths: max. approx. 170 mm Working height: 850 mm Capacity: approx. 25 parts/min. Connection value: approx. 3 kW Installation dimensions: approx. 3200 x 2200 x 2610 mm Weight: approx. 1000 kg Transport dimensions: approx. 3100 x 1220 x 2500 mm

Condition: like new (used), Year of construction: 2007, functionality: fully functional, Manufacturer: MOSCA Type: RO-MS-4/2 Year of manufacture: 2007 Fsdpfszp If Dox Al Uspn Like new condition Maximum strapping size: 600 x 600 mm

Condition: used, For profiling and edge-milling windows doors individual components and similar items with all-round profiles, including return feed Units: Technical data: - 1. Profiling spindle, motor: 11 kW, spindle diameter: 50 mm, clamping length: 320 mm, stroke: 4×80, hydraulic, Fpjdpfeztv Afox Al Uen - 3. Profiling spindle, motor: 11 kW, spindle diameter: 50 mm, clamping length: 320 mm, stroke: 4×80, hydraulic,

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, We are offering several Dürkopp Adler industrial automatic pocket sewing machines from our garment production facility. The machines are designed for the automatic production of piped, flap, and welt pockets and are suitable for industrial trouser, jacket, and garment production. Machines available: • Dürkopp Adler 739 991001 K3 – BVL Automatic 2015 • Dürkopp Adler 745-34-2A – Piped/Welt Pocket Automatic – 30 mm – 2 units Fpjdpfxozzkurj Al Uon • Dürkopp Adler 745-34-2B – Automatic Pocket Sewing Machine – 10/16 mm • Dürkopp Adler 1970 Automatic Sewing Unit for attaching pocket facings The Dürkopp Adler 745 series is designed for the automatic sewing of piped pockets, flap pockets, and welt pocket openings. Depending on the machine configuration, the units are equipped for different pocket widths and production applications. The machines come from an industrial garment factory and were used in professional production. Important: This advertisement covers several machines. The main machine advertised is the Dürkopp Adler 745-34-2B, but the other machines listed above are also available for sale individually or as a package. Photos in the advertisement show the different machines currently available. Location: Romania Quantity: Multiple machines available Sale: Individual machines or complete package Price: On request / depending on machine and quantity Inspection of the machines can be arranged. For serious buyers, additional photos, machine identification details, and videos can be provided upon request. We are open to offers for individual machines as well as for the complete package.

Condition: excellent (used), Year of construction: 1998, Ref:11126 . 1998 Rilecart B-599 Automatic Wire Binding Machine A productive ‘Wire-O’ binding machine with speeds up to 4000 bindings per hour, able to bind a wide variety of book thicknesses using diameters from 5/16” up to 1 inch for a maximum binding thickness of 23 mm. Comprising; Hand feed position for the feeding of pre punched book blocks B599 Automatic closing unit with; Twin Spool wire unwinds system, with paper waste extraction, with automatic change over when spool is low / empty, which ensures consistently high production. Computer controlled programming of binding, from one length, skip feed, up to five lengths in one pass. Automatic wire cutter, toothed belts for different pitch, 3:1 and 2:1. Fodpozmx Udefx Al Uspn Sprockets for 2:1 and 3:1 pitch. Capable of processing either round or square punched work. Speed adjustable up to 4000 bindings per hour, depending on format, thickness, operator skill, and the quality of work being bound. Dedicated wire guide, turning, closing tools for each diameter, with fast change over times possible due to easy to install methods for the tooling. Microprocessor controlled quality checking systems to ensure that production runs smoothly, with read out on the computer screen advising the operator and management of faults, and productivity information. Extended shingle belt delivery. A set of tools for all common sizes of wire from 5/16” up to 1”. Specification: B599 – Formats, Max. binding size: 400mm, Max. transport size: 500 mm Min. binding size: 100mm, Min. transport size: 80 mm Max. bind thickness: 23 mm, Min. 3 mm Max. binding wire diameter: 1”, Min. 5/16” Tooling included; 2:1" pitch - 1/2", 9/16", 5/8", 3/4", 7/8" & 1". Max. working speed: 4,000 books/hour. Electric supply: 3 x 380V. + neutral, 50 Hz. Power req. 8 kW. Compressed air supply (required): 8 Atm,10 mc/hour.

Year of construction: 2025, condition: like new (used), functionality: fully functional, Manufacturer: Metzner Maschinenbau Year of manufacture: 03/21/2025 AM 3800 wire stripping machine Automatic cable assembly machine for cutting to length and stripping cables, stranded wires, and solid wires up to 20 mm in diameter and 70 mm² cable cross-section Technical features & advantages: - Double-knife cutting head as standard, i.e. superior - Outstanding cutting force for cables up to 70 mm² - Exceptional stripping force and, at the same time, gentle handling of the cable thanks to belt feed with support roller - Standard with PC software for controlling an ink-jet printer or processing complex sequences and cable lists; i.e. standard-equipped to meet all requirements without additional costs - Clear and user-friendly operation with 15" touchscreen FHD display - Program memory with cable library for instant availability of recurring orders - Consistently designed for a wide range of applications - Robust construction for continuous industrial use - Pneumatic clamping pressure with automatic pressure control for gentle cable handling during transport and cable stripping - Excellent serviceability thanks to the fastest possible change of feed belts - Thanks to its modular design, the AM 3800 can be optimally adapted to specific requirements and expanded with additional modules Standard scope of supply: - Cable processing machine Metzner AM 3800 - 1 set of V-knives - 2 swiveling-pneumatic cable guides with quick-change guide sleeves - Power connection cable 2.0 m - Data storage with documentation, operating manual Performance data: - Cable cross-section stranded wire max. *): 70 mm² - Cable cross-section solid wire max. *): 16 mm² - Cable diameter max. *): 20 mm - Flat ribbon cables *): ≤ 18 mm width Fpedoz Dat Tepfx Al Usn - Cable lengths: 20 mm - 999 m - Stripping length cable end: 200 mm - Stripping length cable end: 145 mm - Feed speed max.: 180 m/min - Shortest cable length: 70 mm - Material feed direction: left - right Material-dependent Technical data: - Electrical connection: 230V, 50/60 Hz - Compressed air connection: 6 bar - Dimensions (LxWxH): 695 x 880 x 485 mm (without screen) - Weight: 100 kg - Color: Housing RAL 7035 / RAL 5018 / RAL 7016 CE conformity: The AM 3800 meets all CE machine directives regarding mechanical and electrical safety as well as electro- magnetic compatibility. Incl. accessories: - Cable-specific guide sleeves - Blowing device - Various knife sets consisting of: - Infeed guide - Swivel tube - Outfeed guide Note: One guide set is required for each cable diameter. AM 38XX connection for ink-jet printer AM 38XX connection for feeder AM38XX connection for material discharge

Condition: new, Year of construction: 2026, Automatic strapping machine KPW-8060 | PP strap | 220V | up to 60kg | New Description Automatic PP strapping machine KPW-8060 – professional new product Efficient automatic strapping machine for professional use in shipping, warehousing, logistics, production and e-commerce. The KPW-8060 automatically guides the PP strapping band around the package, tightens the band and seals the band ends. With a strapping time of only approx. 1.8 seconds, the machine is particularly suitable for companies with a regular volume of packaging. Technical data: Model: KPW-8060 Type: Automatic PP strapping machine Frame size: 800 × 600 mm (W × H) Maximum strapping size: 600 × 400 mm (W × H) Speed: approx. 1.8 seconds per strap Tension force: adjustable from 0–60 kg Suitable PP strap width: 8–15 mm Suitable strap thickness: 0.5–1.0 mm Power supply: 220 V / 50–60 Hz / 1-phase Power: 800 W Working height: 750 mm Aluminum frame Machine weight: approx. 180 kg Machine dimensions: 1,350 × 600 × 1,430 mm Application areas Ideal for strapping boxes, packages and other suitable items, for example for: Shipping and logistics companies Production plants Warehouses and wholesalers Online retail / fulfillment Packaging and shipping stations Your advantages ✓ New product ✓ Fully automatic strapping process ✓ Fast processing – approx. 1.8 seconds per strap ✓ Adjustable tension force up to 60 kg ✓ PP straps from 8–15 mm can be used ✓ 220-V connection ✓ German commercial seller and contact person ✓ Invoice with VAT shown Price €2,990.00 incl. 19 % VAT Net price for business customers: €2,512.61 plus 19 % VAT Delivery Delivery is by forwarding agent. Please note the delivery time specified in the offer. If you have any questions about the machine, technical equipment or delivery, please feel free to contact us before purchasing. Seller H.Z. Tagiyev UG (limited liability) Germany Commercial sale with invoice and VAT shown. Fedpfjzwgk Iox Al Ujpn